Error 2007 Some Actionscript error has occured

I have tried the converter on a couple of modules that I have been working. I have actually tried it on two differnet machines to make sure there wasn't something machine specific. I am getting Error 2007 - Seom Actionscript error has occured. Has anyone seen this? Any idea what is casuing it?
I have just begun my exploration of the converted and this is my first couple of attempts so I could be doing somethign really obvious.
This is a very basic simuation module with not much more than captions and click boxes.

I've installed twice and always run as admin but same issue. If you hear anything else please let me know.
Kerry Kuehn | Senior Vice President of Learning
3333 East Camelback Road, Suite 212
Phoenix, AZ 85018
602.840.1000 office
816.695.3260 cell
602.957.3057 fax
[email protected]<mailto:[email protected]

Similar Messages

TS3212 when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

TS1702 when I want to install some application from apple store, I always got message " An unknown error has occurred" what should I do to install the application?

when I want to install some application from apple store, I always got message " An unknown error has occurred" what should I do to install the application?

I have the same problem. I need answers on how to fix this. any ideas?

I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know wha

I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know what the problem is and how to fix? Thanks.

https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

Error:COMMON-1: Some unexpected internal error has occured.

Error:COMMON-1: Some unexpected internal error has occured. If the problem persists please report to the Tech Support.
Error: No response from the device "a.b.c.d/161". Check SNMP communities, version or network for issues.
Above errors are seen on accessing WLC for config purpose from WCS. Seen after migrating WCS 4.2.62 to a new hardware and restoring the backed config.
OS and software versions remain the same, only new hardware is an upgraded one.
The original server is now put back in place and works .. just fine.

In this migration, everything is absolutely same except the hardware.
Same WLCs, same WCS version. IP/hostname/configs all same.

Prime Infrastructure 2.1 - User add failed : Some unexpected internal error has occurred.

Setting up Prime Infrastructure to manage 2504 WLC, trying to add Lobby Ambassador and I get this error message:
User add failed : Some unexpected internal error has occurred. If the problem persists please report to the Tech Support.
Technically, this is my second attempt at setting up PI. I set it up initially with the wrong version of PI and created a lobby ambassador. I followed the instructions from the forum with a similar problem that said to remove the trap receiver on the WLC from my first attempt at installing PI.
https://supportforums.cisco.com/discussion/11110686/failed-add-device-wcs-reason-common-1-some-unexpected-internal-error-has-occured
I'm now able to add a Lobby Ambassador as long as its not the same username that I created on the previous PI setup. So I suspect this Lobby Ambassador username is somewhere on the 2504 WLC, but I can't find it anywhere to remove it.

I have just been struggling with a similar issue on a fresh install of Prime 2.1 Upgraded to 2.1.1.
If I try to create the user with lobby ambassador role it just fails with "unexpected internal error".
I eventually found that by creating the user as a normal admin user first - the user is added. You can then go in a remove the admin role and change the role to lobby ambassador. This works with no internal error and the lobby admin user is working fine.
I would say it is just a bug.

Everytime I get to the end of the software update for OS X 10.8.2 it says an error has occured and then restarts the download. I have also tried downloading from the website link provided in some other comments but it says image unmountable please help

Everytime I get to the end of the software update for OS X 10.8.2 it says an error has occured and then restarts the download. I have also tried downloading from the website link provided in some other comments but it says image unmountable please help

Perform a Permissions Repair using Disc Utility...
Verify or Repair Disk Permissions
Then Restart your Mac.
Next...
Go here > http://support.apple.com/kb/DL1581 and Download and Install the Combo Update.
After a Successful Install be sure to Restart your computer.

Adobe Flash Player 10: An ActionScript error has occurred?

Whenever I browse the web with Firefix, I get this sort of error message if the site uses Flash:
Adobe Flash Player 10
An ActionScript error has occurred:
Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: http://content.openforum.com/membersproject/getContentList.jsp?numitems=3&pillar=CAUSES
    at dtas.mp.polite::Politeness/dataLoaded()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/onComplete()
This only started happening when I upgraded to CS4 Professional. Does anyone know why this is happening?

first go here and check if you have the debug player: http://kb2.adobe.com/cps/155/tn_15507.html
if yes, you can download from here: http://get.adobe.com/flashplayer/
(be sure to untick that mcafee garbage.)

Sharepoint 2007 designer - sqldatasource and grid view not displaying on SP page (An unexpected error has occured)

Hi All,
I am using sharepoint designer 2007 and am trying to use a sqldatasource to populate a gridview and then display that on an .aspx page. While in designer everything seems to configure okay. I am able to test the connection and display the data
as expected from the sqldatasource within designer. Then I have the gridview control use the sqldatasource. At that point the grid (within designer) displays the headings as expected. The data that is displayed in the cells is "test data" rather
than actual data value - I'm not sure if this is normal - for example, the data values in every column / row are all equal to 'abc'. Date values are all equal to current date.
Then when I actually display the sharepoint page (via Preview in browser) I get an error "An unexpected error has occurred".
I am using SQLExpress on my laptop as the database for the sqldatasource. I have tried both integrated (windows) and SQL authentication with the same results.
Here is the aspx code from designer:
<asp:GridView runat="server" id="GridView1" AutoGenerateColumns="False" DataSourceID="SqlDataSource1">
<Columns>
 <asp:boundfield DataField="Case Creation Date Time" HeaderText="Case Creation Date Time" SortExpression="Case Creation Date Time">
 </asp:boundfield>
 <asp:boundfield DataField="Case #" HeaderText="Case #" SortExpression="Case #">
 </asp:boundfield>
 <asp:boundfield DataField="Source" HeaderText="Source" SortExpression="Source">
 </asp:boundfield>
 <asp:boundfield DataField="Priority" HeaderText="Priority" SortExpression="Priority">
 </asp:boundfield>
 <asp:boundfield DataField="Status" HeaderText="Status" SortExpression="Status">
 </asp:boundfield>
 <asp:boundfield DataField="Category" HeaderText="Category" SortExpression="Category">
 </asp:boundfield>
 <asp:boundfield DataField="Creator group" HeaderText="Creator group" SortExpression="Creator group">
 </asp:boundfield>
 <asp:boundfield DataField="Assigned Group" HeaderText="Assigned Group" SortExpression="Assigned Group">
 </asp:boundfield>
 <asp:boundfield DataField="Security Event Title" HeaderText="Security Event Title" SortExpression="Security Event Title">
 </asp:boundfield>
 <asp:boundfield DataField="Security Event Resolution Details" HeaderText="Security Event Resolution Details" SortExpression="Security Event Resolution Details">
 </asp:boundfield>
 <asp:boundfield DataField="SLA Achieved" HeaderText="SLA Achieved" SortExpression="SLA Achieved">
 </asp:boundfield>
 <asp:boundfield DataField="Event Reported Date Time" HeaderText="Event Reported Date Time" SortExpression="Event Reported Date Time">
 </asp:boundfield>
</Columns>
</asp:GridView>
 
 
 
<asp:SqlDataSource runat="server" id="SqlDataSource1" ProviderName="System.Data.SqlClient" ConnectionString="Data Source=WN-MNA79GY0V0JD\SQLEXPRESS;Initial Catalog=CD_OPS_DATA;Persist Security Info=True;User ID=Sharepoint_User;Password="xxxxxx""
SelectCommand="SELECT * FROM [Critical Cases] ORDER BY [Case Creation Date Time] DESC">
</asp:SqlDataSource>
 
 
 </td>
</tr>
</table>
</asp:Content>
Any help is appreciated.
Thanks !

Thanks Daniel.
I am unable to connect to my SQL EXPRESS db on my laptop via SPD 2007: I get the error -
I am able to access that database via SQL Server Mgmt. Studio (both with Windows and SQL Server authentication). I can also access a SQL Express database on a remote server from the exact same SPD 2007 session: I get -
So, I wonder why I can connect to the remote but not the local? Anyway, if you have any ideas I would appreciate it. I am willing to do the work from the article you mention but wanted to rule out there being a simple DB access issue first. I'll also
start to find the ULS logs and review them.
Thanks again !!
Update on 1-3-14: Hi, since yesterday I also have been able to connect to the SQLEXPRESS database / table and display the .aspx page with the gridview in Visual Studio 2010.
Update 1-26-14: Sorry for the delayed response. I determined the reason why I could not connect to the SQLEXPRESS instance on my laptop was that there was a local host intrusion (firewall) rule on my machine that prevented an inbound connection
on port 1433. SharePoint server >>> inbound connect on port: 1433 >>> to Laptop device, not allowed.
Thanks.

Error "A critical error has occurred" Due Microsoft SP2 and Excel 2007

Hi,
I am not able to run a query using BEx after I'm installed the Microsoft SP2. I have 2 errors:
1.- The first has to do with the a pop up window that said creation of item text element_24 failed, it is like 24 lines similar
Then the query is open, and I try to run the report, but then a minute after, the application stop and pop up window appear
"A critical error has occurred" and the excel closes.
Do you have any hint how Can I fix this error?
I have a similar error in the past, but removing the excel (I do not remember the #) security windows updatem was enought, now I do not know if this SP2 has embedded this.

Hi ,
I laso faced the same problem, but after implementing SAP note SAP Note 1226977 - BEx Analyzer: Termination when you
insert an analysis table
problem resolved.
Solution
o SAP GUI 6.40
Apply "SAP NetWeaver 2004s BI AddOn Patch" patch level 1801 on your
client workstations. You can find them on SAP Service Marketplace
under:
http://service.sap.com/swdc -> Download -> Support Packages and
Patches -> Entry by Application Group -> SAP Frontend Components ->
SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 6.40 -> Win32 ->
BW700SP18_1801-10001615.EXE.
o SAP GUI 7.10
Apply "BI AddOn Patch for GUI 7.10" patch level 601 for SAP
NetWeaver 7.1 on your client workstations. You can find them on SAP
Service Marketplace under:
http://service.sap.com/swdc -> Download -> Support Packages and
Patches -> Entry by Application Group -> SAP Frontend Components ->
BI ADDON FOR SAP GUI -> BI 7.0 ADDON FOR SAP GUI 7.10 -> Win32 ->
bi710sp06_601-10004472.exe.
See Note 1085218 for information about availability.
hope this will help
br
santosh
Edited by: santosh kumar on Apr 7, 2010 10:10 AM

I'm trying to update some apps and it gives me an error message saying " unknown error has occurred". What does this mean

I'm trying to update my apps and purchase a movie from itunes and it keeps saying "an unknown error has occurred." How do I fix this?

Trying to do both at the same time? Try updating the apps first. Maybe one at a time. Then try buying the movie.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Calculation Services 2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context. at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Web Access 6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context. at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local() --- End of inner exception stack trace --- at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings() at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList() at Microsoft.Office...
2.the event in event viewer is:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2014/10/10 9:49:43
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ***.net
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: ***
Account Domain: ***
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port: 63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
 <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
 <EventID>4625</EventID>
 <Version>0</Version>
 <Level>0</Level>
 <Task>12544</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8010000000000000</Keywords>
 <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
 <EventRecordID>37602685</EventRecordID>
 <Correlation />
 <Execution ProcessID="532" ThreadID="26096" />
 <Channel>Security</Channel>
 <Computer>***.net</Computer>
 <Security />
</System>
<EventData>
 <Data Name="SubjectUserSid">S-1-0-0</Data>
 <Data Name="SubjectUserName">-</Data>
 <Data Name="SubjectDomainName">-</Data>
 <Data Name="SubjectLogonId">0x0</Data>
 <Data Name="TargetUserSid">S-1-0-0</Data>
 <Data Name="TargetUserName">***</Data>
 <Data Name="TargetDomainName">***</Data>
 <Data Name="Status">0xc000006d</Data>
 <Data Name="FailureReason">%%2304</Data>
 <Data Name="SubStatus">0x0</Data>
 <Data Name="LogonType">3</Data>
 <Data Name="LogonProcessName">
 </Data>
 <Data Name="AuthenticationPackageName">NTLM</Data>
 <Data Name="WorkstationName">***</Data>
 <Data Name="TransmittedServices">-</Data>
 <Data Name="LmPackageName">-</Data>
 <Data Name="KeyLength">0</Data>
 <Data Name="ProcessId">0x0</Data>
 <Data Name="ProcessName">-</Data>
 <Data Name="IpAddress">***</Data>
 <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

Very Common Premiere Error?? "Sorry, a serious error has occurred that..."

"Sorry, a serious error has occurred that requires Premiere to be shut down. We will attempt to save your current project"
Yep, that one. I get it every time I open up Premiere. The error box reappears after a couple of seconds, then it keeps reappearing and stacking up until I close the program.
I've done the most recent updates (Vista and Adobe), and spent hours on the net reading and trying different solutions. To no avail.
I think this is a pretty common error, no? But from everything I've read, people get the error using PR mid-program. For me, I can't even open the program. After Effects also starts (as a process in Task Manager), but runs in the background.
I updated MS Office 2007 (big update) and also my NVIDIA drivers (after I started getting this error).
You can read my recent problem that might help you understand a little bit more about this error on this thread.
Would upgrading to a Quadro GPU help at all?
My PC:
C2D E8400 o'cd @ 3.6GHz
8GB ram (DDR2 800)
1TB raid 0 (500GB internal as scratch disk)
2 512mb 9600GT's in SLi - should I upgrade?? NVIDIA Quadro?
Vista Ultimate 64-bit

Thanks, Jim.
So, (considering my unwillingness to wreck my current setup), would this possibly help my performance:
OS: (2) 500GB internal SATA's in RAID 0 (as is)
Scratch Disk: (1) 500GB internal SATA (sort-of as is)
Media files Disk: (1) 1TB non-'green' internal SATA (new purchase)
My main question is: What's the main difference between a Scratch Disk and a Media Files Disk?
For instance, I have a newly captured clip (let's call it footage.mpeg). And I have music.mp3 and lotsofpictures.jpg. So would I store all three of those files on my Media Files Disk, or on the Scratch Disk? The Scratch Disk was just for rendered files I thought (like when you're working on a project and previewing it?)? And so is Premiere reading from my Media Files Disk to play footage.mpeg and then using the Scratch Disk to bounce files back and forth? Sorry if I'm not making ANY sense.
Is my suggested setup a dumb idea (bad investment)?
PS - this may be another problem: my Scratch Disk (Hitachi internal 500GB SATA) is an OEM drive shipped as running on SATA I for 'backwards capability' for older mobos. So, I downloaded the firmware updater from Hitachi and the updater wasn't working (locking up after booting from CD). I figured it would be fine. Well, SATA I runs at a much slower speed than SATA II (the new standard). But I was transferring files to and from the drive and my OS RAID configuration and Vista was reporting over 30MB/s sustained write speed. Which by the way is not SATA II (also called SATA 3.0Gbit/s). I think this may be causing some of my performance issues. What do you think? Normally, SATA II should run at 300MB/s (so they claim) SATA 3.0Gbit/s specs

A critical error has occured. Processing of the service had to be terminate

When manager wants to approve the employee leave request its giving following error.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.lea.form.FcForm.getCustomizing(FcForm.java:1020)
     at com.sap.xss.hr.lea.form.FcForm.onInit(FcForm.java:417)
     at com.sap.xss.hr.lea.form.wdp.InternalFcForm.onInit(InternalFcForm.java:2053)
     at com.sap.xss.hr.lea.form.FcFormInterface.onInit(FcFormInterface.java:184)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.onInit(InternalFcFormInterface.java:1911)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.onInit(InternalFcFormInterface.java:2007)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.lea.worklist.VcWorkList.onInit(VcWorkList.java:267)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkList.onInit(InternalVcWorkList.java:363)
     at com.sap.xss.hr.lea.worklist.VcWorkListInterface.onInit(VcWorkListInterface.java:164)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface.onInit(InternalVcWorkListInterface.java:144)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface$External.onInit(InternalVcWorkListInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Customizing_Get(LeaveRequestAdaptiveModel.java:392)
     at com.sap.xss.hr.lea.model.Pt_Arq_Customizing_Get_Input.doExecute(Pt_Arq_Customizing_Get_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 47 more
   kindly help ASAP,

Hi,
Did you give enough authorizations to the user at the beack end.
Just Try giving SAP_ALL authorizations and check.
Regards,
Santhosh

Error 2007 Some Actionscript error has occured

Similar Messages

Maybe you are looking for