Error 2009 when updating firmware

My iphone 4(USA and GSM), is actually on firmware 4.3.3, I was trying to fresh install at the same firmware, but itunes was always giving me error 3194(and yes I'm using the most actual itunes version(10.4) ), I gave up and tried updating it to 4.3.5, it turns off my iphone, when it's going to load the apple screen with a bar under it, my iphone begins to turn on and itunes gives me error 2009 or 2006 after some time, I've tried EVERYTHING, like, puttin into DFU mode(even special dfu mode), changing usb port, renitiating computer, reinstalling usb port, etc. I don't know what to do anymore! Is not a problem on the usb port seen that I  can sync with itunes normally, help me pleaze.
Thank you for your attention and time.

Edit the hosts file on your computer and remove any lines that contain gs.apple.com. As you didn't say what OS you have I can't tell you where to find it, but Google will help. BTW, undating to 4.3.5 will either brick the phone or remove the jailbreak. It's not a good idea to update jailbroken phones.

Similar Messages

  • Failure when updating firmware. Write error in disc

    I have tried to update the software of my ipod of fifth generation and leaves a message that puts: failure when updating firmware. Write error in disc. Please, only it have 20 days. I need help. I have proven to put it in way disc, I have to reinstall software and nothing gives result.

    here is a good place to start with that error:
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod

  • Error 2009 - when downgrading 3G iOS4 to 3.1.3

    Hi guys,
    I've been following http://lifehacker.com/5572003/how-to-downgrade-your-iphone-3g%5Bs%5D-from-ios-4- to-ios-313 to try and downgrade my iphone to 3.1.3. It is currently running on iOS 4.01. However, I keep getting the Error 2009 when I restore with the older file! Any ideas what to do here?
    here is my error log:
    2010-08-21 11:24:34.609 [3784:28c]: restore library built Jun 8 2010 at 18:17:31
    2010-08-21 11:24:34.609 [3784:28c]: iTunes: iTunes 9.2.1.5
    2010-08-21 11:24:34.609 [3784:28c]: iTunes: Software payload version: 7E18 (option key)
    2010-08-21 11:24:34.656 [3784:69c]: iTunes: Specifying UOI boot image
    2010-08-21 11:24:34.796 [3784:9d4]: iTunes: Specifying UOI boot image
    2010-08-21 11:24:34.796 [3784:9d4]: no variant specified; authinstall is disabled
    2010-08-21 11:24:34.796 [3784:9d4]: <DFU Device 0EDBCF10>: production fused device
    2010-08-21 11:24:34.796 [3784:9d4]: unable to open device_map.txt: No such file or directory
    2010-08-21 11:24:34.796 [3784:9d4]: WinDFU::OpenDFUDevice: path: \\?\USB#VID05AC&PID1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#c8be2617
    2010-08-21 11:24:34.796 [3784:9d4]: WinDFU::OpenDeviceByPath: \\?\USB#VID05AC&PID1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#c8be2617
    2010-08-21 11:24:34.796 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 1
    2010-08-21 11:24:34.796 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 3
    2010-08-21 11:24:34.812 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 5
    2010-08-21 11:24:34.812 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 7
    2010-08-21 11:24:34.812 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 9
    2010-08-21 11:24:34.828 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 11
    2010-08-21 11:24:34.828 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 13
    2010-08-21 11:24:34.828 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 14
    2010-08-21 11:24:34.828 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 16
    2010-08-21 11:24:34.843 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 18
    2010-08-21 11:24:34.843 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 20
    2010-08-21 11:24:34.843 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 22
    2010-08-21 11:24:34.859 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 24
    2010-08-21 11:24:34.859 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 26
    2010-08-21 11:24:34.859 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 27
    2010-08-21 11:24:34.875 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 29
    2010-08-21 11:24:34.875 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 31
    2010-08-21 11:24:34.875 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 33
    2010-08-21 11:24:34.890 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 35
    2010-08-21 11:24:34.890 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 37
    2010-08-21 11:24:34.890 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 39
    2010-08-21 11:24:34.906 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 40
    2010-08-21 11:24:34.906 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 42
    2010-08-21 11:24:34.906 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 44
    2010-08-21 11:24:34.906 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 46
    2010-08-21 11:24:34.921 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 48
    2010-08-21 11:24:34.921 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 50
    2010-08-21 11:24:34.921 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 52
    2010-08-21 11:24:34.937 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 54
    2010-08-21 11:24:34.937 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 55
    2010-08-21 11:24:34.937 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 57
    2010-08-21 11:24:34.953 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 59
    2010-08-21 11:24:34.953 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 61
    2010-08-21 11:24:34.953 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 63
    2010-08-21 11:24:34.968 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 65
    2010-08-21 11:24:34.968 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 67
    2010-08-21 11:24:34.968 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 68
    2010-08-21 11:24:34.984 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 70
    2010-08-21 11:24:34.984 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 72
    2010-08-21 11:24:34.984 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 74
    2010-08-21 11:24:34.984 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 76
    2010-08-21 11:24:35.000 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 78
    2010-08-21 11:24:35.000 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 80
    2010-08-21 11:24:35.000 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 81
    2010-08-21 11:24:35.015 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 83
    2010-08-21 11:24:35.015 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 85
    2010-08-21 11:24:35.015 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 87
    2010-08-21 11:24:35.031 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 89
    2010-08-21 11:24:35.031 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 91
    2010-08-21 11:24:35.031 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 93
    2010-08-21 11:24:35.046 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 95
    2010-08-21 11:24:35.046 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 96
    2010-08-21 11:24:35.046 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 98
    2010-08-21 11:24:35.046 [3784:9d4]: WinDFU::UploadData: EOF, cbRead: 1412
    2010-08-21 11:24:35.046 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 100
    2010-08-21 11:24:35.046 [3784:9d4]: WinDFU::UploadData: ZLP
    2010-08-21 11:24:35.062 [3784:9d4]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2010-08-21 11:24:35.062 [3784:9d4]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFESTSYNC
    2010-08-21 11:24:35.062 [3784:9d4]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2010-08-21 11:24:35.062 [3784:9d4]: WinDFU::ProcessUpdateState: status.bState == DFUSTATEMANIFEST, PollTimeout: 3000
    2010-08-21 11:24:38.062 [3784:9d4]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2010-08-21 11:24:38.062 [3784:9d4]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFEST_WAITRESET
    2010-08-21 11:24:38.062 [3784:9d4]: WinDFU::ResetDevice: resetting...
    2010-08-21 11:24:43.078 [3784:9d4]: WinDFU::FinalizeDfuUpdate: success
    2010-08-21 11:24:43.078 [3784:9d4]: <DFU Device 0EDBCF10>: DFU succeeded
    2010-08-21 11:24:43.093 [3784:b88]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID05AC&PID1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#c8be2617
    2010-08-21 11:24:43.093 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a4a0b8, notify: 2, connected: 0
    2010-08-21 11:24:43.093 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a53660, notify: 2, connected: 0
    2010-08-21 11:24:43.093 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x0e6c3d40, notify: 2, connected: 0
    2010-08-21 11:24:43.093 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02ae35b0, notify: 2, connected: 1
    2010-08-21 11:24:43.093 [3784:b88]: AppleDevice::NotifyDisconnect: DFU \\?\USB#VID05AC&PID1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#c8be2617, inst: 0x2ae35b0
    2010-08-21 11:24:43.109 [3784:b88]: _AMDFUModeDeviceFinalize: 0EDBCF10
    2010-08-21 11:24:47.500 [3784:b88]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360
    2010-08-21 11:24:47.500 [3784:b88]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360
    2010-08-21 11:24:47.531 [3784:b88]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2010-08-21 11:24:47.562 [3784:b88]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2010-08-21 11:24:47.578 [3784:b88]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2010-08-21 11:24:47.578 [3784:b88]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360, inst: 0x2a53660
    2010-08-21 11:24:47.578 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a4a0b8, notify: 2, connected: 0
    2010-08-21 11:24:47.578 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a53660, notify: 1, connected: 0
    2010-08-21 11:24:47.578 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x0e6c3d40, notify: 2, connected: 0
    2010-08-21 11:24:47.578 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02ae35b0, notify: 0, connected: 0
    2010-08-21 11:24:47.578 [3784:b88]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 1
    2010-08-21 11:24:47.578 [3784:b88]: AppleDevice::NotifyConnect: Interfaces total != arrived, no notification
    2010-08-21 11:24:47.703 [3784:b88]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360
    2010-08-21 11:24:47.703 [3784:b88]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360
    2010-08-21 11:24:47.734 [3784:b88]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2010-08-21 11:24:47.750 [3784:b88]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2010-08-21 11:24:47.750 [3784:b88]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
    2010-08-21 11:24:47.750 [3784:b88]: AppleDevice::SetDeviceID: AMDINTERFACEDFU \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360, inst: 0x2a53660
    2010-08-21 11:24:47.750 [3784:b88]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360, inst: 0x2a53660
    2010-08-21 11:24:47.750 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a4a0b8, notify: 2, connected: 0
    2010-08-21 11:24:47.750 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a53660, notify: 1, connected: 1
    2010-08-21 11:24:47.750 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x0e6c3d40, notify: 2, connected: 0
    2010-08-21 11:24:47.750 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02ae35b0, notify: 0, connected: 0
    2010-08-21 11:24:47.750 [3784:b88]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
    2010-08-21 11:24:47.750 [3784:b88]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360, inst: 0x2a53660
    2010-08-21 11:24:47.750 [3784:b88]: IBOOT, DFU \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360, inst: 0x2a53660
    2010-08-21 11:24:47.765 [3784:28c]: iTunes: SCEP 5
    2010-08-21 11:24:47.781 [3784:b3c]: iTunes: Specifying UOI boot image
    2010-08-21 11:24:47.781 [3784:b3c]: iBoot build-version = iBoot-636.66.33
    2010-08-21 11:24:47.781 [3784:b3c]: iBoot build-style = RELEASE
    2010-08-21 11:24:47.781 [3784:b3c]: AMDeviceIoControl: GetOverlappedResult failed
    2010-08-21 11:24:47.781 [3784:b3c]: AMDeviceIoControl: pipe stall
    2010-08-21 11:24:47.781 [3784:b3c]: USBControlTransfer: error 31, usbd status c0000004
    2010-08-21 11:24:47.781 [3784:b3c]: command device request for 'getenv radio-error' failed: 2008
    2010-08-21 11:24:47.781 [3784:b3c]: radio-error not set
    2010-08-21 11:24:47.781 [3784:b3c]: no variant specified; authinstall is disabled
    2010-08-21 11:24:47.781 [3784:b3c]: unable to open device_map.txt: No such file or directory
    2010-08-21 11:24:47.781 [3784:b3c]: <Recovery Mode Device 02AFEEB8>: production fused device
    2010-08-21 11:24:47.781 [3784:b3c]: interface has 1 endpoints, file pipe = 1
    2010-08-21 11:24:47.781 [3784:b3c]: <Recovery Mode Device 02AFEEB8>: operation 4 progress -1
    2010-08-21 11:24:47.953 [3784:b3c]: <Recovery Mode Device 02AFEEB8>: operation 42 progress -1
    2010-08-21 11:24:48.312 [3784:b88]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360
    2010-08-21 11:24:48.312 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a4a0b8, notify: 2, connected: 0
    2010-08-21 11:24:48.312 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a53660, notify: 2, connected: 1
    2010-08-21 11:24:48.312 [3784:b88]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360, inst: 0x2a53660
    2010-08-21 11:24:48.312 [3784:b88]: IBOOT, DFU \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360, inst: 0x2a53660
    2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x0e6c3d40, notify: 2, connected: 0
    2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02ae35b0, notify: 2, connected: 0
    2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360
    2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a4a0b8, notify: 2, connected: 0
    2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a53660, notify: 2, connected: 0
    2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x0e6c3d40, notify: 2, connected: 0
    2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02ae35b0, notify: 2, connected: 0
    2010-08-21 11:24:49.125 [3784:b3c]: AMDeviceIoControl: failed, error 2, usbd status c0000004
    2010-08-21 11:24:49.625 [3784:b3c]: AMDeviceIoControl: failed, error 2, usbd status c0000004
    2010-08-21 11:24:50.125 [3784:b3c]: AMDeviceIoControl: failed, error 2, usbd status c0000004
    2010-08-21 11:24:50.625 [3784:b3c]: USBControlTransfer: error 2, usbd status c0000004
    2010-08-21 11:24:50.625 [3784:b3c]: command device request for 'bgcolor 0 0 0' failed: 2009
    2010-08-21 11:24:50.625 [3784:b3c]: <Recovery Mode Device 02AFEEB8>: Recovery mode failed (result = 2009)
    2010-08-21 11:24:50.625 [3784:b3c]: _AMRecoveryModeDeviceFinalize: 02AFEEB8
    2010-08-21 11:24:50.750 [3784:28c]: iTunes: Restore error 2009

    I have no idea what Apple suggests or would suggest. What I do know is Apple does not support downgrading to an earlier firmware version and hacking an iPhone is against Apple's license agreement for the iPhone, and is not supported by Apple directly or indirectly via these discussions.
    I have read a report that Apple is addressing this for 3G and 3GS owners with the problem with the next firmware update, which is in developer's hands as a BETA for testing and feedback and should be released soon.

  • Error 800B0100 when updating

    Hi,
    I got error 800B0100 when updating (package KB970430). Checking the SUR logfiles shows this:
    =================================
    Checking System Update Readiness.
    Binary Version 6.0.6002.22202
    Package Version 6.0
    2009-12-17 10:45
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    (f)    CBS MUM Missing    0x00000002    servicing\packages\Package_49_for_KB970430~31bf3856ad364e35~amd64~~6.0.1.6.mum       
    (f)    CBS MUM Missing    0x00000002    servicing\packages\Package_for_KB970430_server_0~31bf3856ad364e35~amd64~~6.0.1.6.mum       
    (f)    CBS MUM Missing    0x00000002    servicing\packages\Package_for_KB970430_server~31bf3856ad364e35~amd64~~6.0.1.6.mum       
    (f)    CBS MUM Missing    0x00000002    servicing\packages\Package_for_KB970430~31bf3856ad364e35~amd64~~6.0.1.6.mum       
    Checking Component Store
    Summary:
    Seconds executed: 139
     Found 4 errors
      CBS MUM Missing Total count: 4
    Unavailable repair files:
        servicing\packages\Package_49_for_KB970430~31bf3856ad364e35~amd64~~6.0.1.6.mum
        servicing\packages\Package_for_KB970430_server_0~31bf3856ad364e35~amd64~~6.0.1.6.mum
        servicing\packages\Package_for_KB970430_server~31bf3856ad364e35~amd64~~6.0.1.6.mum
        servicing\packages\Package_for_KB970430~31bf3856ad364e35~amd64~~6.0.1.6.mum
        servicing\packages\Package_49_for_KB970430~31bf3856ad364e35~amd64~~6.0.1.6.cat
        servicing\packages\Package_for_KB970430_server_0~31bf3856ad364e35~amd64~~6.0.1.6.cat
        servicing\packages\Package_for_KB970430_server~31bf3856ad364e35~amd64~~6.0.1.6.cat
        servicing\packages\Package_for_KB970430~31bf3856ad364e35~amd64~~6.0.1.6.cat
    Thanks.
    Kevin
    RTL

    Hi Wilson,
    Thank you! It worked, except for the fact that i've produced the error i already made a topic about. Please refer to it here:
    http://social.technet.microsoft.com/Forums/en-US/winservermanager/thread/22094f08-9482-4600-a338-443c50a8777c?prof=required&ppud=4
    I got an error 80070020 now when i want to update. I think it has to do with permissions, but i'm not actually confident where i should change them to.
    What i did:
    1. Copy necessary files from another server to the server with the update error
    - Error about permissions popped up, but:
    2. In command prompt:
        - cd c:\windows\servicing
        - takeown /f Packages /r /d y
        - yicacls directory_name /grant administrators:F /t
    3. Copy all files to the servicing directory without any errors
    (2) This will change the ownership of all files to the Administrations-group, but the hilarious thing is that error 80070020 is now popping up, at exactly the same way as on the other machine with the topic mentioned above.
    Is there a quick way to regrant the permissions?
    Also, i get this error in the Event Viewer:
    Windows Servicing identified that package KB970430(Security Update) is not applicable for this system
    Please look at this page to view 2 screenshots of what happens:
    http://img69.imageshack.us/gal.php?g=screen1fq.jpg
    I'm getting screenshot 1 for 2 milliseconds and then the errors pops up.
    Thanks
    Kevin

  • DTW - Error occurs when updating UDF field

    Error occurs when updating UDF field:"bank does not exist in the company Application-defined or
    object-defined error65171"
    What is the meaning of this message?
    thanks
    Edited by: Nadav Greifman on Oct 11, 2009 12:39 PM

    You may check these threads forst:
    Invalid valid value '0003' Error 65171
    bank account is missing application -define or object define Error 65171
    Re: Journal entries
    Re: Error importing Incoming Payments using the Data Transfer Workbench
    Thanks,
    Gordon

  • Error message when updating Itunes...can not open Itunes program

    I am recieving error message when updating Itunes for my computer.  The error message reads "MSVCR80.dll is missing and the other error message reads Error 7  (Windows error 126)"  I can not open my Itunes.  I have reloaded the Itunes onto my computer but still have the same error messages.  Please help.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99364)

  • Did you get error 1067 when updating Reader?

    If you got update error 1067 when updating Reader, I'd like to hear more so we can find a solution.
    What OS are you using and what version (such as Window XP SP2)?
    What version of Reader do you have?
    What was the error message you got?
    How much disk space do you have available?
    How much memory (RAM) is on your system?
    I recommend you try installing again using the direct download link noted in this document under "Try a different download link":
    http://kb2.adobe.com/cps/836/cpsid_83641.html#main_Try_a_different_download_link
    Please let me know if this helps. We haven't been able to reproduce this error.
    Thanks so much!

    I just worked through this error on my Dad's computer.  He has XP Home SP 3, Adobe Acrobat 4 and Reader 9.4.7 were already installed. He has been getting to 1067 error for some time and just clicking through it.  I manually un-installed Acrobat 4,  but left the shared files in web/common alone.  I did not touch Reader 9.4.7. I downloaded the alternate installer for Adobe 10.1.2 for English and ran it.  It did complain, eventually, about 9.4.7 still having a file in use, but I'd left the previous dialog from the 9.4.7 updater failure open.  I closed that 9.4.7 failure dialog and hit 'retry', and the installer proceeded onward and seems to have completed successfully.
    This machine has 1 gig of RAM and approx 4G of free disk space on C:. 

  • Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.

    Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.
    Exact error below:
    error 1321: the installer has insufficient privileges to modify the file C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\I386\[dll file]
    Thanks in advance!

    My first thought is to not just apply permissions to the folder but be sure to apply them to all objects inside them. It would be interesting to see if you can rename this file, then rename it back to its original name; this would test permissions nondestructively.

  • Error 4 when updating the text data

    When i am trying to load the data  using IP i am facing the issue Error 4 when updating the text data.Please suggest me
    Edited by: srikanth reddy612 on Dec 15, 2011 12:45 PM

    hi srikanth,
    you might have selected given lowercase data
    and please check in the Infoobject the lowercase Checkbox is unchecked then it will allow you to update from IP.
    also check in the Datasource fields tab whether particular field is unchecked with lowercase.
    if checked all records you are pushing will have to be in uppercase.
    thanks
    Sankaresh S

  • I am getting an un expected error message when updating the setting to "extend network".  Is there an obvious setting I may be missing?  Cisco router being used.

    I am getting an un expected error message when updating the setting to "extend network".  Is there an obvious setting I may be missing?  Cisco router being used.

    If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
    It is extremely unlikely that this will work with a Cisco router.
    If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

  • HT1766 error 8000067 when updating version 5.1 on ipad1..what to do?

    Error 8000067 when updating version 5.1 on Ipad. please help to avaoid to loose everything. thanks and regards

    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types.  You do not have enough access privileges for this operation." How to fix?

    After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player.  It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types."  I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem.  Any suggestions?  Thanks.
    J

    Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

  • I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

    I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

    Hi there MRDLS,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W.

  • [SOLVED] Strange error message when updating Pacman

    I get a following error message when updating pacman and doing system upgrades:
    [mike@goat ~]$ sudo pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    looking for inter-conflicts...
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
    I tried running pacman -Syyu, but that did not seem to solve the problem.  There is /var/lib/pacman/local/openssl-0.9.8l-1/
    directory but it is empty.  When running pacman -S openssl, I get the above error message as well but it spans for hundreds of buffer lines.  In the end I end up with this:   
    openssl: /usr/share/man/man3/ssl.3.gz exists in filesystem
    openssl: /usr/share/man/man3/ui.3.gz exists in filesystem
    openssl: /usr/share/man/man3/ui_compat.3.gz exists in filesystem
    openssl: /usr/share/man/man3/x509.3.gz exists in filesystem
    openssl: /usr/share/man/man5/config.5.gz exists in filesystem
    openssl: /usr/share/man/man5/x509v3_config.5.gz exists in filesystem
    openssl: /usr/share/man/man7/des_modes.7.gz exists in filesystem
    Errors occurred, no packages were upgraded.
    [mike@goat ~]$
    Anybody have any insight?
    Thanks,
    maschinetheist
    Last edited by maschinetheist (2010-03-02 17:18:42)

    Bregol wrote:
    Sounds to me like openssl is installed on your system but the info on it is now missing from the local pacman database (/var/lib/pacman/local).  In other words, pacman forgot that you installed it.  So in your second clip of code, pacman is complaining that files belonging to openssl exist in your filesystem, since you do have it installed but it no longer knows that.
    Don't know if this is the proper way to fix it, but I imagine forcing a reinstall of openssl (pacman -Sf openssl) should get pacman to reinstall openssl so that it knows it is installed.
    Bregol,
    pacman -Sf openssl
    seemed to have fixed it.  Did not know of the force reinstall option.  The necessary directories in /var/lib/pacman/local/openssl have been created.
    Thanks,

  • Error 1602 when updating Iphone 4 from 4.3 to 5.. Any help ?

    Error 1602 when updating Iphone 4 from 4.3 to 5 and after that it goes into "recovery mode" but Its not recognized by Itunes, I can only exit it with Tinyumrella and nothing else.

    It seems that the itunes program has some interfefence when contacting the apple server.
    i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
    Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
    ha presto it began the process of transfering the file to the iphone4 and has now fully updated
    hope that helps
    leon

Maybe you are looking for