Error 2009 while uploading XAP to Store
I am getting error 2009 while uploading the XAP file to the store:
>"The Xap Processing for the package failed. Please refer to this page
>for troubleshooting information Validation errors
>2009: The embedded file MDILFileList.xml isn¹t allowed."
The problem was that I was trying to upload a signed version of the xap, so this error code is not really helpful.
Similar Messages
-
Error occurred while uploading iPhoto book
I have been trying to upload (buy) a photobook through iPhoto. It builds OK and seems to transfer all the data (60MB) then stops and displays an error message:
"An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file"
Network is fine and I have tried the following suggestions:
Rebuild iPhoto
Throttle restricted upload (this seemed counter intuitive but the data tx seemed correct)
Would appreciate any workable ideas.David (Apple Photo Services) wrote:
If it helps I will also leave you with a few steps I have when it comes to errors in the account >stopping the purchases. If the steps Old Toad said did not help, I am hoping this is what it takes:
A) Please delete your net services folder. To do so, please follow the path below:
MacintoshHD ->Library -> Application Support -> NetServices
Single-click on the NetServices folder and delete the entire folder.
B) Make corrections in Apple Store
1. Go to the Apple Store online and click Your Account in the navigation bar:
http://store.apple.com/us
2. Sign in using your Apple ID and password.
3. Click "Change account information" on the right and sign in again.
4. Verify or enter your Billing and Shipping address information.
5. Delete your credit card information in the Method of Payment section, and then re-enter it. Do >not enter spaces in your credit card number. Click Continue.
C) Next go back to iPhoto:
1) Select the "Buy Book" button.
2) Click on "Account Info" and then "Edit Billing information".
3) Change the type of card, and then blank out the remaining fields: card number, security code, >and expiration date.
4) Click "Save".
5) You should then receive an error that you will need to fill in those fields.
6) Complete all the fields again and click "Save".
Subsequently, please attempt to submit your order.
Thank you for your patience in this matter. I hope to hear from you soon.
Sincerely,
David H
Apple Photo Services Customer Support
http://www.apple.com/support/photoservices/ww/
Thanks OT. I've done this with no improvement, David H from Apple suggested a similar solution.
I've since copied the iPhoto library to the MacBook Pro and tried to upload from there. I'm now getting a billing error so think I must have made an error when I re-typed. Trying again....
mrtotes -
Error message while uploading the flat file
Hi Experts,
I am getting the error message while uploading the flat file.
Message class: MG
Number: 147
The message is: Several descriptions exist for the language JA.
Please guide me why this error is occuring.
Regards
Akshayhi,
how are you uploading the file and where ?
u can use open dataset , read dataset or gui_upload
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm -
Error occured while uploading to ODS.
Hi,
error occured while uploading to ODS from R/3........
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Second step in the update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.Hi varun,
thx's 4r reply
I already check it in st22 transaction..... it's showing short dump.
ShrtText
Exception condition "NOT_EXIST" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
and one more thing. i don't know about the locks can u plz clear about that locks......
when i enter the sm12 then its asking
Lock argument and table name
4r wht perpose these thing's
thank's in advance
regard's
venkat -
I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!
Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry. -
Error 8 while upload the program : row 425 message
Can any one answer this ?
I am not using Any lower case letters any special characteristics in the flat file.
But still i am getting the same error "Error 8 while upload the program : row 425 message "
Thankshi padma
or chk this
In case of the flat file datasource, when you assign flat file source system again, the system assign IS to the old transfer structure! Because of the same DS name.
There are 2 remedies.
1. Log off the system. During the current session the system may keep deleted IO, TRs, URs etc and propose them again. Log off should wipe deleted objects.
2. If the #1 didn't help. - Recreate an infosource with a new name. Create all other structures as needed.
reg
ashwin -
Just for the record:
I had received the error message "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file" after all data apparently had been uploaded.
After trying everything recommended on the internet, I finally found the culprit: Glimmerblocker, an ad blocker!
(GlimmerBlocker version 1.4.16, Mac OS X 10.7.2 Lion)
Actually, the credit goes to the very patient German Apple support: they had finally asked me: "what software have you installed lately" ... a big applause to the guys there!
Best,
Gabriel.In our case, it was not third party software, but a problem with our router not accepting pings. If you are using a router be sure to set-up Enable WAN Ping Respond, in the advanced settings. I reviewed my wireless router's logs and found that it was blocking ICMP Type 3 packets from Apple's server. As a result, it would give the message, "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file." You can find the blocked packets in your log based on the time you clicked the buy button for your iPhoto purchase (in my case about a dozen times). If your packets are blocked, then that is your problem.
I should have suspected it was the connection since the message plainly said, "...check your network connection...". However, I discounted this along with so many others based on the forums, since I could connect to the internet. If there only was a way the message could have gave a little more saying, "Enable your WAN Ping Respond now, or else!"
Good fortune on your road to Macenlightenment! -
Virus Found error message while uploading document in Document Library
Hi,
When uploading documents into the document library, I got a message "Virus Found" ERROR message.
the installed virus scanner is urrently unavailable.If the problem persists, please contact your administrator.
How to resolve this issue? its in staging environment. in our test environment we never received this error message while uploading the message.
help is appreciated.hi
have you installed an antivirus app on server?
Check this link
https://support.microsoft.com/en-us/kb/2953311/
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you. -
IPhoto cards: "An error occurred while uploading one of your files."
Hey, all.
I've been trying to print some cards via iPhoto (version 6.0.6) but, while some are successful on the first attempt, others just keep generating the following error message no matter how many times I try them: "An error occurred while uploading one of your files."
I'm at a loss. They assemble fine. They connect fine. They transfer fine. Then I just get this irritating message over and over and over...plus my credit card company keeps calling about "unusual activity" (which would be the multiple "pending" charges for the same dollar amount that each of these tries generate).
I've tried searching these forums and, while others seem to have had this problem, I've yet to read an actual solution.
And I've tried contacting Apple but they've been, in a word, useless. Polite, but useless.
Any suggestions?
Thanks!
Message was edited by: theshadowalkertheshadowwalker
like, say, panning the image
What do you mean by "panning"? The only time I've heard this term is with video, referring to moving the camera from right to left. So, if you can explain how what you mean by this it might help.
While there are reports on this forum about folks having issues uploading, compared to the sheer volume of photo orders Apple process it's quite a small amount, and certainly not enough to suggest a systemic fault.
And I'd already tried removing the pictures and cards from iPhoto, then halving the pictures' size (MB) in Photoshop, then recreating the whole lot from scratch. Still, no effect.
Can you explain how you did this? What interaction have you set between iPhoto and Photoshop?
Other than that: Start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
4. What color profile are these images? Have they been processed in Adobe Lightroom or other software before iPhoto? What's the source of the images - Camera? Scanner? Other?
Regards
TD -
Error message while upload excel file (with macro) to sap (iw28)
While upload excel file to sap through iw28, i get error message (vb)
u2022 i have to say that the excel file contain macro , with out the macro , work fine .
u2022 The error display just in refresh command.
the error message :
Public Sub ALV_CUS_Exit()
Dim objs As ChartObjects
Dim obj As ChartObject
Dim sheet As Worksheet
Dim r As Range
For Each sheet In Sheets
Set objs = sheet.ChartObjects
For Each obj In objs
Set r = Sheets("RawData").UsedRange
obj.Chart.SetSourceData Source:=r
Next obj
Next sheet
End Subhi,
This is releated to the ABAP coding...There might be some ouput problem in the Abap list viewer...Pls check it with the ABAP consultant...
Regards
Priyanka.P -
Error Raised while uploading Excel file to SAP
Hi All,
I am getting error while uploading excel file into SAP using the function module 'TEXT_CONVERT_XLS_TO_SAP'.
Error Message is UX(893) - 'Excel file & cannot be processed' .
Please let me know what went wrong.
Regards,
DeepthiHi,
1 .TEXT_CONVERT_XLS_TO_SAP Funtion module will work if you have installed Microsoft Excel at front end.
2. Whenyou declare internal table for upload, specify the char only in the strcture ,don't specify any data element or dictionary reference. If the data element and dictionaly reference is character field then its ok.
eg.
types:begin of st_data,
field1 type char15,
field2 type char23,
endif.
3. Close the excel before you upload
Hope this might solve your issue.
Regards
Aromal R -
Error handling while uploading data through Batch Input Session
I want to upload data from a file to 2 different infotypes at the same time. One is a user defined infotype 9010 and the other is a standard infotype 2010. 9010 infotype has the start and end time whereas 2010 doesn't.While uploading I have put validations to check duplicate entries for infotype 9010 based on the start time and endtime. The duplicate entry is rejected in 9010 but the same gets uploaded in 2010. In 2010 I can't put any validations because there is no start time and end time. I want to prevent the upload of the entry in infotype 2010 if it is not uploaded in 9010. Please help.
Doing IMPORT?EXPORT will act like a global variable shared between two separate programs.
Here is an example:
In first part, export the values to a memory variable after your conditions satisfy and you want to set a flag, like this ...
free memory id 'ZFLAG_VAR'. "recomended to clear that variable
" before start, you dont need to declare it
data: l_flag type c.
if my_condition = 'true'.
l_flag = 'X'.
export l_flag to memory id 'ZFLAG_VAR'.
endif.
In second part, you can
import l_flag from memory id 'ZFLAG_VAR'.
if l_flag = 'X'.
write: 'hmmmm ... the flag was marked, so my condition was true in last part'.
endif.
Edited by: Rob Burbank on Nov 25, 2009 3:12 PM -
Can anyone help with the Photo Book process? I have tried at least a dozen times and the Photo Book always fails at the very last stage of the process. I ordered Buy Book, it assembles the book and files are transferred until the very last moment... it says " An error occurred while uoloading one of your files. Please check your network connection and click Retry to resend your files." It fails every time, any advice? My server is TalkTalk which may explain everything !! ?? Help.
Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and order from there.
Also make a PDF file of your book according to this Apple Document, iPhoto '11: Preview a book, card, or calendar before you order or print it, before you order to check for errors. Keep that file to compare with the printed copy when it arrives.
OT -
Error occured while uploading the data for Tocde QP01 (BDC)
Hi,
I am facing a strange problem i.e. when i try to upload the data for the Tcode QP01 i am able to upload the data for the 18 rows but when it is more than 18 ,it gives the following error and saves the data upto 18 rows only :-
CALL_TRANSACTION QP01 returncode: 0 RECORD: 0
S Field RC27X-FLG_SEL . not found in loop of screen SAPLCPDI 1400
S Cursor field PLMKB-VERWMERKM (18) does not exist in the screen
S Field PLMKB-VERWMERKM (18) does not exist in the screen SAPLQPAA 0150
S Field PLMKB-STICHPRVER (18) does not exist in the screen SAPLQPAA 0150
S Inspection plan with plan group 12775 for material 200999 is saved
Is there any way to solve this problem...hi,
Ok,i agree with you but the thing is it was allowing to upload the data for more than 18 rows as there was logic written. It is specified in the code:-
ELSEIF itab1-serial > 18 AND itab1-serial < 35.
IF index = 19.
index = 2.
ENDIF.
Edited by: nav009 on Sep 9, 2009 8:25 AM -
Error Encountered while uploading HTML, PDF files via WEBUI and IFS API
Hello:
We have suddenly run into problems while using IFS to upload files. We cannot seem to upload html and pdf files using either the WEBUI or Oracle's IFS API. However we are able to add .gif, jpeg files both via the WEBUI and Oracles IFS API's
This is the error we get while trying to upload .html files via the WEBUI
IFS-30002: Unable to create new Library Object.
This is the stack trace we get when we try creating content objects via IFS API's. We can't seem to understand why something that used to work has suddenly quit working.
Does this have anything to do with running out of space requirements in the table spaces?
oracle.ifs.common.IfsException: IFS-30002: Unable to create new LibraryObject oracle.ifs.common.IfsException: IFS-32251: SQL Error inserting index entry into ODMZ_CONTEXT_ROUTER java.sql.SQLException: ORA-29875: failed in the execution of the ODCIINDEXINSERT routine
ORA-01410: invalid ROWID
ORA-01410: invalid ROWID
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:862)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1846)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1771)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2361)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:487)
at oracle.ifs.server.S_LibrarySession.execute(S_LibrarySession.java:14319)
at oracle.ifs.server.S_Media.insertIntoContextRouter(S_Media.java:2473)
at oracle.ifs.server.S_Media.postSetContent(S_Media.java:2440)
at oracle.ifs.server.S_Media.setContent(S_Media.java:1699)
at oracle.ifs.server.S_ContentObject.setContent(S_ContentObject.java:399)
at oracle.ifs.server.S_ContentObject.extendedPreInsert(S_ContentObject.java:236)
at oracle.ifs.server.S_LibraryObject.preInsert(S_LibraryObject.java:1644)
at oracle.ifs.server.S_LibraryObject.createInstance(S_LibraryObject.java:2711)
at oracle.ifs.server.S_LibrarySession.createSystemObjectInstance(S_LibrarySession.java:8128)
at oracle.ifs.server.S_Document.setContentObject(S_Document.java:475)
at oracle.ifs.server.S_Document.extendedPreInsert(S_Document.java:313)
at oracle.ifs.server.S_LibraryObject.preInsert(S_LibraryObject.java:1644)
at oracle.ifs.server.S_LibraryObject.createInstance(S_LibraryObject.java:2711)
at oracle.ifs.server.S_LibrarySession.newLibraryObject(S_LibrarySession.java:7922)
at oracle.ifs.server.S_LibrarySession.newPublicObject(S_LibrarySession.java:7963)
at oracle.ifs.server.S_LibrarySession.newPublicObject(S_LibrarySession.java:7945)
at oracle.ifs.server.S_LibrarySession.DMNewPublicObject(S_LibrarySession.java:7604)
at oracle.ifs.beans.LibrarySession.DMNewPublicObject(LibrarySession.java:7898)
at oracle.ifs.beans.LibrarySession.NewPublicObject(LibrarySession.java:5342)
at oracle.ifs.beans.LibrarySession.createPublicObject(LibrarySession.java:2969)
at ORG.oclc.da.utilities.ifs.IfsDocumentUtility.createDocumentDefinition(IfsDocumentUtility.java:238)
at ORG.oclc.da.utilities.ifs.IfsDocumentUtility.createHTML(IfsDocumentUtility.java:133)
at ORG.oclc.da.utilities.ifs.IfsDocumentUtility.createDocument(IfsDocumentUtility.java:89)
at ORG.oclc.da.chs.userinterface.CHSProcessListener.download(CHSProcessListener.java:1043)
at ORG.oclc.da.chs.core.Spider.download(Spider.java:605)
at ORG.oclc.da.chs.core.CHSTest_raj.main(CHSTest_raj.java:145)
Any help on this front is appreciated.
thanks
Mathangitry this code, it works fine for me:
<%@ page import="java.io.*"%>
<%
String name = "C:/temp/EURO_Weekly_wk01-10-26.pdf";
try
InputStream in = new FileInputStream(name);
int n = 0;
//read the file from the input stream to the byte buffer
out.clear();
response.setContentType("application/pdf");
while( (n=in.read()) != -1)
out.write (n);
out.close();
catch (IOException ioe) {
out.println ("io error: " + ioe.getMessage());
return;
%>
Maybe you are looking for
-
32-bit Siebel 7.7 and 7.8 Web Client on 64-bit Windows Vista
Hello all, do you think it is possible to successfully install the 32-bit Siebel Web Client (version 7.7 and 7.8) on Windows Vista 64-bit ? I'm running Siebel client software against an Oracle 9i database. In fact, my Oracle client is version 10g (32
-
Iphoto Book with only 17 pages
Can I make a book with only 17, instead of 20 pages? I'm trying to delete the existing pages 18-20, but I can't figure out how. Or maybe I am forced to have a 20 page book.... Please advise. gavin
-
I have a column chart and I was wondering if it is possible to add an onclick event to the columns. What I would like to do is link the columns to a details state with a datagrid that displays the records making up the column. Is this possible?
-
Page flow . . .
I have an extensive spreadsheet with Numbers. When printing, if the second row on a given page is too long to fit entirely on that page the entire row is forced to the next page (much like widow or orphan control in a word processor). What I would ra
-
HT1364 Iomega Home Media Network Hard Drive, Cloud Edition
Hi just installed the above and transferd all my music but now cannot play them on my iPad it can see the hard drive in iTunes but will not play any advice cheers Darren