Error 201 when trying to run the demos !! HELP !!
Hello, we are just trying to run the demos provided in the ZIP file that comes with the XDK version for Solaris 9i and we are having problems apparently with the encoding thing.
I dont really have a clue how to make it run or provide the right encoding parameter. I have attempted to use every single parameter, UTF-8, ISO, ASCII, etc
anyone had this problem at the very beginning?? or know how to solve it?? we r just beginner trying a start jump in XML and all this parser matter.
thanks a lot. Verde.
Please refer to:
http://technet.oracle.com:89/ubb/Forum11/HTML/004973.html
Similar Messages
-
Error message when trying to run the Upgrade for Itunes
I got a new laptop and to transfer my Itunes I downloaded the latest version of Itunes from the website (v7)
When I try to run the upgrade on my new laptop I get the error message - *This installation package could not be opened. Verify that the package exists and is accessible, or contact the application vendor to verify that this is a valid Windows Installer package.*
Can anyone help me and give me advice on how to get my itunes upgraded!!!!! I miss my tunes!Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
Error 1073807331 when trying to Run the "servo" example in Labview.
Error -1073807331 occurred at Property Node (arg 2) in VISA Configure Serial Port (Instr).vi->LabVIEW Interface for Arduino.lvlib:Init.vi->LabVIEW Interface for Arduino.lvlib:Arduino Servo.vi
So, I can connect to the Arduino Mega 2560 in MAX and also in VISA, but when I try to run this example, I get the above error. with the explanation "The specified attribute is not defined or supported by the referenced resource."
the ONLY error i can see in VISA is this :
under Configuration/View attributes- "Interrupt in pipe status | VI_ATTR_USB_INTR_IN_STATUS | Invalid Property Value"
this is in red., all other text is in black.
Under "Input/Output" I can write to the board "*IDN?\n" and get a return of 6bytes which it appears happy with.
Query button appears happy as well.
as does "Read"
the "read status byte" button gives me "
Read STB Operation
Error
VISA: (Hex 0xBFFF003A) Unable to start operation because setup is invalid (due to attributes being set to an inconsistent state)."
I am at a loss as to what to do about this as I cannot see a way to change this value.
Any help is greatly appreciated.
thanks
Jason LeeOK, well I know how to connect the arduino to my PC as well, its simple.
I have been playing around with the mega2560 for over a year, so it's not that.
I can connect to and talk to the 2560 from the arduino IDE, but not LabView. I did see both TX and RX activity tonight, and thought, "yay! its finally stopped being retarded", but as soon as I hit run, it fell back to the old"cannot find arduino"
the reason I was using VISA was because I couldn't get any joy from the serial/USB method.
If I somehow mange to let the magic smoke out of this, I doubt I'd be very upset bout it.
anyway, any other ideas?
Cheers
Jason -
WUC-18 when trying to run webutil demo form
We set up Oracle Webutil, but are getting this java console output when trying to run the demo form:
Oracle JInitiator: Version 1.3.1.13
Using JRE version 1.3.1.13-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\me
Proxy Configuration: Manual Configuration
Proxy: 1.1.1.1
Proxy Overrides:
JAR cache enabled
Location: C:\Documents and Settings\me\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://mymachine:8888/forms90/webutil/webutil.jar from JAR cache
Loading http://mymachine:8888/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
Loading http://mymachine:8888/forms90/webutil/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 902122
2004-Feb-20 17:42:42.734 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.750 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.765 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.781 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.796 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.875 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.875 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:42.890 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Feb-20 17:42:44.109 WUI[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.ffisamp.dll
2004-Feb-20 17:42:44.500 WUI[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2004-Feb-20 17:42:44.500 WUI[loadSettings()] Local properties file loaded
oracle.forms.net.ConnectionException: Forms session <2> aborted: unable to communicate with runtime process.
at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
read metalink note 252600.1 and implemented the changes mentioned there. Also walked through the configuration files, see no error there.
Regards
AndreasI take it a simple webutil form with something like CLIENT_GET_FILE_NAME works ok?
If so, then maybe its worth doing a Ctr Shift K and recompile the demo ad try again.
Regards
Grant Ronald
Forms Product Management -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?
Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao. -
Error when trying to run the rcu.bat file as part of OBIEE 11g installation
when trying to run the rcu.bat file as part of OBIEE 11g installation on windows 7 64 bit I am getting the following error
"windows cannot find C:\Users\manoj\Desktop\Oracle.Make sure you typed the name correctly, and then try again".
Please help me how to overcome this error, I am not able to understand why it is looking for C:\Users\manoj\Desktop\Oracle.
Thanks
Manojafter setting the ORACLE_HOME and Path environment variables also....I am still getting the same error...so is it like RCU can be run only on windows 7 32-bit machines and it does not work on 64-bit machines? and also it seems like the previous versions of OBIEE 10.1.3.X does not support windows 7 64-bit machines...
please help me finding a solution to this error....
and what are all the versions of OBIEE can be installed on windows 7 64-bit machines?
can't we install OBIEE 11g on windows 7 64-bit machines without including RCU?
thanks
Manoj
Edited by: mkumar on Jun 2, 2011 3:47 AM -
I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.
You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]] -
im getting an error message when trying to install the application cd on my Imac os x 10.6.4 what can I do to solve this problem?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
Exception CX_RS_ERROR occurred when trying to run the DTP from Cube
Hi everyone,
I've run the DTP & loaded the cube using normal transformation routines , it works fine in the Dev Sys but not in quality & production. I've access only to the Dev sys. In Qual & Prod when trying to run the DTP from Cube to open HUB
we're getting the following error
Exception CX_RS_ERROR occurred (program: CL_RSTRAN_TRFN================CP, include: CL_RSTRAN_TRFN================CM024*
My system support package level is SAPKW70106.
I've found note 920338 but is for SAPKW70107.Hi,
The issue seems to be with the one of the routines in the transformation and similar kind of the issues were solved by retransporting the DTP & the related transformation.
Kindly reactivate the DTP and transformation in the source and execute a new request to transport the DTP, transformation and related routines to Quality & Production again.
Hope this helps.
Rgds,
Colum -
i have recently installed the ni 4552 for pci dynamic signal analyser, and am attempting to configure my system and teach myself labview. when attempting to run the daq solution wizard i am presented with the daq hardware configuration required window.
Attachments:
DAQ_Hardware_Configuration_Required.ppt 38 KBhi brian, thanks for your help. i have recently received version 6.1, and done a complete re-install. i have also downloaded the latest ni daq (6.9.2) and ni dsa (6.11) versions and installed them, but still i get the same error message when trying to open the solutions wizard (please see attached powerpoint presentation).
upon selecting the "go to ni daq config utility" option MAX opens. everything appears to be in order (device passes test, test panels run ok and virtual channels are configured correctly). i am unable to go any further.
i would appreciate any guidance that you are able to give me in this matter. many thanks in advance of your help.
best regards,
ben halkon -
I purchased Illustrator for one month but when trying to run the application, it asks me to "renew the subscription". I tryed to reload illustrator two times and reloaded CreativeCloud but still it doesn't work. What else can I try? I need AI immediately for work
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
I keep getting an error message when trying to download the new security software IOS 7.0.6?
what error message?
-
An error occurred when trying to access the service
I'm asking myself why I purchased a one year subscription to Adobe Reader to convert PDF files to Doc files, when it NEVER WORKS and no one seems to be able to help me!!! I am on a Mac Book Pro with Yosemite (don't upgrade it slows your Mac badly) and whenever I try to convert a pdf to a doc I get 'an error occurred when trying to access the service', can anybody help me please?
Hi Cedric,
The customer service number is 800833687
The direct link for chat support is: http://adobe.ly/19llvMN
You need to click on 'Still need help' to initiate the chat session.
Are you getting this error: "an error occurred when trying to access the service" while trying to access the service via Reader.
Try using the link: https://cloud.acrobat.com/exportpdf sign in with your Adobe ID and try to convert a pdf to doc and check if that works for you.
Reards,
Rave -
Export PDF will not convert a pdf to MS Word. This failure has been going on for about a week. The error message is "An error occurred when trying to access the service." What can I do to get this working again?
Hi,
It seems it was working fine earlier.
Is this happening with all files?
You can try using different browser.
Regards,
Florence
Maybe you are looking for
-
I have opened a second iTunes account when I purchased my iPad and downloaded movies and books to it that I have purchased on that account. All my music is on my original iTunes account so I was told at the apple store to keep that account only or I
-
Can't connect to 802.1x wifi
Did anybody succeed in connecting to a 802.1x authenticated wi-fi network? I've got a 2G iphone with 2.1 firmware. My iphone asks me whether i want to join an "enterprise wi-fi network", I tap OK, then it asks me for the username and password (which
-
Zen Microphoto works with USB1.1, but not USB
I recently bought a Zen Microphoto 8gb. After some trouble installing it, i finally got it to work. My computer has 6 USB-ports, where 2 is USB. compliant, and 4 are USB2.0 compliant. I connected the Microphoto to one of the USB. ports, and Windows X
-
Can I turn off sharing using applescript
Is it possible to write AppleScript that will turn iTunes sharing on and off? I would like to be able to do this so that it's easier to turn that on and off when I carry my laptop around (I don't always want to share my iTunes library with everyone
-
No matter what I do iDVD 09 quits with a "iDVD unexpectedly quit . . " message after exporting from FCE. The movie has 12 chapters and includes chapter markers. I have tried to rename file, repair permissions, delete plist prefs, save as disk image,