Error 2014 during iSight recording
I have been trying to record video through iSight on my Macbook Pro, but after a while (maybe roughly 20-30 minutes into the recording) the video starts getting choppy and it gives the error # 2014.
Any ideas?
Make shorter recordings?
View the window to note how large your file is getting. Device Native files can be huge and you'll have problems when free hard drive space is running low.
You can always join these short captures together or send them to other apps for further editing.
You can also "Pause" your captures by holding down the Option key before clicking on the red button in the recording window.
Similar Messages
-
Color tint shifts constantly during isight recording
I recently updated from a 13" aluminum MacBook to a 13" MacBook Pro. When I record the video of the isight camera, the lighting color constantly shifts from red to green to red etc. Very annoying. It didn't do this with my 1 year old MacBook. The MacBook Pro isight is terrible. I reviewed a previous post and have not been able to resolve the issue. Any suggestions? Apple Care is closed already tonight on the east coast.
Thanks,
RichardI may be answering my own inquiry. When the light source is compact fluorescent lighting of medium intensity, it appears the video camera searches for the "correct" color balance. Unfortunately, the wavelength output of low wattage compact fluorescent bulbs is vastly different from incandescent bulbs. By increasing the lighting levels in the room (turn on some other lights), the software is able to lock on a color and produces a stable color image. Using mixed fluorescent bulbs (cool & warm bulbs) can sometimes confuse the system's ability to set the best color.
If the color constantly shifts, turn on some additional lighting. It will stabilize the results. If the final color is not optimal, there is software that can be used to shift the color to your preference.
I hope this helps others who are experiencing the same issue. The camera has certain limitations due to size and resolution. If you want high quality video, you could always use a small HD video camera - like the new Sanyo Xacti SC1 coming out in March - to record your video.
Richard -
Error occurs during Asset Master Record Creation.
Hello SAP Gurus,
The error occurs during asset master record creation.
Our fiscal year variant is Z6 (July to June). The asset was acquired in June 15 (previous fiscal year) but was only set up on July 30 (this fiscal year) . When we put the depreciation start date as 15 June the error appeared. While saving the Asset master we are getting below error.
We tried the same with Post Capitalization of Asset (ABNAN) there also we are getting same error.
ERROR: - as below
u2003
SYST: *You cannot determine the period for rule 02 to 05.08.08 ( todayu2019s date )*
*Message no. AA613*
*Diagnosis*The system could not determine a depreciation period on 05.08.08 for period control 02 of the period control method of phase N1 of depreciation key INTERN-00001-0000.
Procedure
Maintain the assignment of the periods for the period control entered.
Proceed
If the period control you entered is a standard period control, you can assign the periods automatically.Proceed
Please find enclosed attachment for clear description of the error.
Please share your experiences regarding this subject.
Thanking you in anticipation.
Regards,
Suresh.
09986375966Hi,
have you generated the period controls properly? If not, the error is raised correctly by the system.
To generate period controls go to:
IMG Asset Accounting -> Depreciation -> Valuation Methods -> Period Control -> Generate Period Controls / or you can use OA84
Regards,
Markus -
Error during result recording in QE71
Hi Gurus,
I am using inspection point (copy of 150) in my inpection plan. When i am trying to save my result recording in QE71 system giving below error message.
Insp. Lot Oper Charac. no Sample Message text MsgType Message ID Msg.No.
80000000196 0010 10 2 You must enter a text for the characteristic result E QE 462 C60
Though i have maintained the resuts.
Please help to resolve this issue.
Regards
SandipYou need check the inspection characteristic's control indicator.
Transaction QP03 (display inspection plan)
If you set 'Docu. required' in control indicator of inspection characteristic, additional text must always be entered to document the inspection results during results recording for this characteristic.
Try to change the indicator to 'No documentation' then there will be no more that message in transaction QE71.
Regards
Luke -
@I am trying to download an update for Adobe Illustrator CC 2014 and it Keeps telling me Errors encountered during installation. (U44M1P7). Why is this happening. It never used to do this on updates.
Updates : http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-
Problem updating After Effects CC (2014) I get this message: Update Failed Error encountered during installation. (U44M1P7)
Hi,
It’s version 13.1.1 It’s a trial version.
I am updating it from the Creative cloud desktop application.
I have the photography subscription with Lightroom and Photoshop with Creative Cloud.
I was interested in trying out the video software and have trials of Premiere Pro as well as others. The CC desktop app alerted me to the AF update just as it does for the others I subscribe to plus the ones I am using as trials. I have not had any problems with the other apps (trial or not), only with AF.
Thanks.
Nancy Chadwick -
Quicktime Pro Error Message Using iSight To Record
Just wanted to post this quick fix to an issue I had (BTW), before I FIGURED THIS OUT, I called Apple support and was told I'd have to pay $199.00 for QT Support... nice Apple. Anyway, if you are trying to record using the built in iSight camera and get an error message "can't record video" (I'm paraphrasing) check to see where you're saving the video (as in the folder). QT defaulted to my desktop, but it had little RED hash (minus) sign on it. I changed the saved folder location to my "Movies" folder and it worked (FYI: I changed it back to my desktop folder to see if that was really the issue, but it worked fine, so I'm not sure what desktop folder it was looking at, maybe a shared one).
Hope this helps someone and it's free.
PS: Check your settings in preferences as well.I've got the same problem. does anybody has an solution?
how many files can QT handle? -
ECATT RAISE EXCEPTION error during multiple record processing
I wish to load records to a table via an in-house-written ABAP program. This program consists of a main screen and multiple sub-screens. I am submitting an Excel spreadsheet as input. The eCATT configuration successfully runs the TCD script for alternate records. For every other record that is processed, a RAISE EXCEPTION error occurs. If an even number of records is submitted, the same result occurs upon multiple re-submissions. If an odd number of records is resubmitted, the RAISE EXCEPTION error occurs on opposite records from the previous submission. For example,
Submission #1: Re-submit #1:
1. success 1. success
2. RAISE EXCEPTION 2. RAISE EXCEPTION
3. success 3. success
4. RAISE EXCEPTION 4. RAISE EXCEPTION
Submission #2: Re-submit #2:
1. success 1. RAISE EXCEPTION
2. RAISE EXCEPTION 2. success
3. success 3. RAISE EXCEPTION
Any suggestions to resolve this would be much appreciated.Hi ,
i think the recording of your script is on TCD.
just double click the recording you have made and find a field name called "DATA_INCOMPLETE" parameterised that "X".Now execute and see,it should work fine..
Regards,
Venky -
Error message during processing in BI
1.i am loading the data into infoobject.
2.got error in text data load.
3.master info object have compound obj 0COUNTRY
4.and other normal fields are 0TXTSH,0LANGU,sold-to-party.
5.there is no PSA in this..its direct update to INFOobject.
The error message is:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Diagnosis
There are duplicates of the data record 2. with the key '3.' for characteristic 1..
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.Hi KP,
In the details tab,
1.under Transfer (IDOC and Trfc):
Data Package 1 : arrived in BW ; Processing : Error records written to application log
2.Processing (data packet): Errors occurred
Update ( 0 new / 0 changed ) : Errors occurred
Error records written to application log
0TRZONE : Data record 1 ('0000000001D ') : Duplicate data record
0TRZONE : Data record 2 ('0000000002D ') : Duplicate data record
Error 4 in the update
3. Process chain error
these are the error details. -
I received the above error reinstalling SQL Server 2008. I have tried all suggestions. This error also appears when I install any version of SQL Server.
I have also installed;
Microsoft® .NET Framework Version 2.0.50727.4927
Microsoft® .NET Framework Version 4.0.31106.0
Microsoft® .NET Framework Version 3.0.6920.50
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052081
Exit facility code: 1212
Exit error code: 1935
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-23 19:17:20
End time: 2014-02-23 19:21:35
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SqlSupport_KatmaiRTM_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: OHPC
Machine processor count: 2
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: H:\SQLServer2008R2_SP1\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: OHPC\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SystemConfigurationCheck_Report.htm
SFC/ Scannow
2014-02-23 19:08:22, Info CSI 0000016f [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:08:22, Info CSI 00000170 [SR] Beginning Verify and Repair transaction
2014-02-23 19:08:23, Info CSI 00000172 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:23, Info CSI 00000174 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000176 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000177 [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:08:26, Info CSI 00000179 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 0000017c [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:27, Info CSI 0000017d [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:08:27, Info CSI 00000180 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 00000182 [SR] Verify complete
2014-02-23 19:12:33, Info CSI 00000326 [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:12:33, Info CSI 00000327 [SR] Beginning Verify and Repair transaction
2014-02-23 19:12:33, Info CSI 00000329 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032b [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032c [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:12:35, Info CSI 0000032f [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:12:36, Info CSI 00000331 [SR] Verify complete
2014-02-23 19:13:14, Info CSI 0000035d [SR] Repairing 3 components
2014-02-23 19:13:14, Info CSI 0000035e [SR] Beginning Verify and Repair transaction
2014-02-23 19:13:14, Info CSI 00000360 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000362 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000364 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000366 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000367 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:13:15, Info CSI 0000036a [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 0000036c [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 0000036d [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:13:15, Info CSI 0000036f [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000371 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 00000372 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:13:15, Info CSI 00000375 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000377 [SR] Repair complete
2014-02-23 19:13:15, Info CSI 00000378 [SR] Committing transaction
2014-02-23 19:13:15, Info CSI 0000037c [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repairedSummary:
Attempted proposed solution. Error still appears.
This is installed:
Microsoft Visual C++ 2005 ATL Update kb973923 - x86 8.0.50727.4053
Microsoft Visual C++ 2005 Redistributable 8.0.56336
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
I reinstalled:
vcredist_x64 Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) .exe
vcredist_x86 Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).exe
Results:
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable (x64). Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft
Corporation. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable. Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft Corporation.
Reconfiguration success or error status: 0.
I installed SQLServer2008R2_SP1
Same error message came up;
SqlSupport_KatmaiRTM_Cpu64_1.log
MSI (s) (64:94) [23:03:43:910]: Source for file 'pfbafgaq.dll' is uncompressed, at 'H:\SQLServer2008R2_SP1\1033_ENU_LP\x64\setup\sql2008support\PFiles\SqlServr\100\Setup\Release\x64\'.
MSI (s) (64:94) [23:03:43:926]: Executing op: SetTargetFolder(Folder=C:\Windows\winsxs\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.1833_none_8a17faaf2edd3e00\)
MSI (s) (64:94) [23:03:43:926]: Executing op: SetSourceFolder(Folder=1\Windows\winsxs\nvdlei3o.taa\)
MSI (s) (64:94) [23:03:43:926]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.1833,ProductCode={B40EE88B-400A-4266-A17B-
E3DE64E94431},ProductVersion=10.1.2731,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:941]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: AssemblyCopy(SourceName=uvdlei3o.taa|
ATL80.dll,SourceCabKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,DestName=ATL80.dll,Attributes=0,FileSize=113152,PerTick=65536,,VerifyMedia=1,ElevateFlags=4,,,,ComponentId=
{837BF1EB-D770-94EB-A01F-C8B3B9A1E18E},,,,AssemblyMode=0,)
MSI (s) (64:94) [23:03:43:972]: Assembly Error:The system cannot find the path specified.
MSI (s) (64:94) [23:03:43:972]: Note: 1: 1935 2: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} 3: 0x80070003 4: IAssemblyCache 5: CreateAssemblyCacheItem 6:
Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"
MSI (s) (64:94) [23:03:43:972]: Assembly Error (sxs): Please look into Component Based Servicing Log located at -169675656ndir\logs\cbs\cbs.log to get more diagnostic information.
MSI (s) (64:94) [23:03:49:882]: Product: Microsoft SQL Server 2008 Setup Support Files -- Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
MSI (s) (64:94) [23:03:49:882]: User policy value 'DisableRollback' is 0
Thanks, Ted U -
Internal error (-2014) Goods Issue with Batch Items added through UI
Hello Experts,
I've added a button to my Production Order screen labeled 'Issue Components' that is meant to streamline the process, and it works, except when the ProdOrder has Batch controlled items on it. When that happens it returns Internal error (-2014)<br><br>
I've tried stepping through the code and it doesn't error until the final Add
Here is my function, Thanks for the Help!<br><br>
I'm using CitiXSys Inventory Pro and am pulling the items from the Picked table, that's what that sQuery does. It returns correctly. I've also set everything to 'Manual' instead of 'Backflush'<br><br><br>
<pre>
Private Sub IssueComponents(ByVal iDocNum As Integer)
Try
'Declaring the needed variables'
Dim oRec As SAPbobsCOM.Recordset
Dim oGoodsIssue As SAPbobsCOM.Documents
Dim bIssueLineAdded As Boolean = False, sQuery As String = "", x As Integer = 0, iCode As Long = 0, sErrorMessage As String = ""
Dim tmpLot As String = ""
'Instanciating the Goods Issue'
oGoodsIssue = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenExit)
'Initialzing the SBO object'
oRec = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
'Assing the header of the Goods Issue'
oGoodsIssue.DocDate = Date.Now
oGoodsIssue.DocDueDate = Date.Now
'Getting the entire "Manual" components for this production order to issue them'
sQuery &= "Select PK1.U_DocNo, KI.U_ItemCode, KI.U_BseLnNo, OW.DocEntry, KI.U_Quantity, KI.U_WhsCode, KI2.U_BatSrlNo, KI2.U_LotNo from [OWOR] OW (NOLOCK) INNER JOIN [@ctx_pkin] PK ON OW.DocNum = PK.U_BaseDoc," & vbNewLine
sQuery &= "[@ctx_PKIN] PK1 (NOLOCK) INNER JOIN [@CTX_KIN1] KI (NOLOCK) ON PK1.U_DocNo = KI.U_DocNo," & vbNewLine
sQuery &= "[@ctx_KIN1] KI1 (NOLOCK) INNER JOIN [@CTX_KIN2] KI2 (NOLOCK) ON KI1.U_DocNo = KI2.U_DocNo and KI1.U_BseLnNo = KI2.U_BseLnNo" & vbNewLine
sQuery &= "where OW.DocNum = '" & iDocNum & "' and PK.U_BaseType = 202 and PK1.U_DocNo = PK.U_DocNo and KI1.U_DocNo = PK.U_DocNo and KI1.U_BseLnNo = KI.U_BseLnNo" & vbNewLine
'Executing the query'
oRec.DoQuery(sQuery)
'Looping through the "Manual" components'
For x = 0 To oRec.RecordCount - 1
'Prompting the user'
oAppl.StatusBar.SetText("Issuing Components...(" & x + 1 & " of " & oRec.RecordCount & ")", SAPbouiCOM.BoMessageTime.bmt_Long, SAPbouiCOM.BoStatusBarMessageType.smt_Warning)
'Adding the previous line if applicable'
If bIssueLineAdded Then
oGoodsIssue.Lines.Add()
End If
'Filling the line information'
oGoodsIssue.Lines.WarehouseCode = oRec.Fields.Item("U_WhsCode").Value 'dIssueComponents(x).Item("WhsCode")
'oGoodsIssue.Lines.TransactionType = SAPbobsCOM.BoTransactionTypeEnum.botrntComplete
oGoodsIssue.Lines.BaseEntry = oRec.Fields.Item("DocEntry").Value 'oProductionOrder.AbsoluteEntry
oGoodsIssue.Lines.BaseType = 202 'Production Order Type'
oGoodsIssue.Lines.BaseLine = oRec.Fields.Item("U_BseLnNo").Value 'GetBaseLine(oProductionOrder.AbsoluteEntry, dIssueComponents(x).Item("Component"))
'oGoodsIssue.Lines.ItemCode = oRec.Fields.Item("U_ItemCode").Value
oGoodsIssue.Lines.Quantity = oRec.Fields.Item("U_Quantity").Value 'Math.Round(oRec.Fields.Item("U_Quantity").Value, 2) 'dIssueComponents(x).Item("PlanQty")
'Checking if the item is neither lot or serial controlled item'
If oRec.Fields.Item("U_BatSrlNo").Value = "" And oRec.Fields.Item("U_LotNo").Value = "" Then
'Nothing controlled item'
ElseIf oRec.Fields.Item("U_BatSrlNo").Value <> "" Then
'Lot controlled item'
tmpLot = oRec.Fields.Item("U_BatSrlNo").Value
'oAppl.MessageBox("Lot: " & tmpLot & ", whs: " & oRec.Fields.Item("U_WhsCode").Value & ", qty: " & oRec.Fields.Item("U_Quantity").Value)
oGoodsIssue.Lines.BatchNumbers.Add()
oGoodsIssue.Lines.BatchNumbers.BatchNumber = oRec.Fields.Item("U_BatSrlNo").Value
oGoodsIssue.Lines.BatchNumbers.Quantity = oRec.Fields.Item("U_Quantity").Value 'Math.Round(oRec.Fields.Item("U_Quantity").Value, 2)
'Else
'Serial controlled item'
'oGoodsIssue.Lines.SerialNumbers.SystemSerialNumber = oRec.Fields.Item("").Value
End If
'Setting the line to be added'
bIssueLineAdded = True
'Movoing to the next record'
oRec.MoveNext()
Next x
'Checking if there was any component or not'
If bIssueLineAdded Then
'Adding the Goods Issue'
iCode = oGoodsIssue.Add
If iCode <> 0 Then
oCompany.GetLastError(iCode, sErrorMessage)
oAppl.MessageBox("Goods Issue Production Order: " & iDocNum & " didn't get created for the following reason: " & serrormessage)
Else
oAppl.StatusBar.SetText("Components were issued successfully.", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
'TODO: add to ProdOrder remarks field
End If
End If
Catch ex As Exception
oAppl.MessageBox("IssueComponents() " & ex.Message)
oAppl.StatusBar.SetText("Error in IssueComponenets() : " & ex.Message, SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
End Try
End Sub
</pre>
Edited by: Rob Daniels on May 30, 2011 10:33 PMPlease use the latest upgrade of Inventory Pro from CitiXsys.
If you are using SAP Business One 2007; use Inventory Pro 5.6 series
For SAP Business One 8.8 and up; use Inventory Pro 6.6.1 and up -
During installation of SCCM agent on 1 particular server we get following error:
ccmsetup.log
MSI: Action 14:19:26: CreateFolders. Creating folders ccmsetup 15/09/2014 14:19:26 6524 (0x197C)
MSI: Action 14:19:26: CcmDetectFilesInUseRollback. Rolls back files moved by CcmDetectFilesInUse. ccmsetup 15/09/2014 14:19:26 6524 (0x197C)
MSI: Action 14:19:26: CcmDetectFilesInUse. Moves files that are in use so that they will be deleted upon the next reboot. ccmsetup 15/09/2014 14:19:26 6524 (0x197C)
MSI: Action 14:19:26: CcmDetectFilesInUseCommit. Commits action of CcmDetectFileInUse. After this we cannot rollback. ccmsetup 15/09/2014 14:19:26 6524 (0x197C)
MSI: Action 14:19:27: InstallFiles. Copying new files ccmsetup 15/09/2014 14:19:27 6524 (0x197C)
MSI: An error occurred during the installation of assembly 'Microsoft.ConfigurationManager.AssetProvider.dll,Version="5.0.0.0",Culture="neutral",PublicKeyToken="31bf3856ad364e35"'. Please refer to Help and Support for more
information. ccmsetup 15/09/2014 14:19:28 6524 (0x197C)
MSI: Action 14:19:28: Rollback. Rolling back action: ccmsetup 15/09/2014 14:19:28 6524 (0x197C)
File C:\Windows\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi installation failed. Error text: ExitCode: 1603
Action: InstallFiles.
ErrorMessages:
Internal Error 2908. {C6660293-02D9-4DF8-9088-6BB194EC1A67}
An error occurred during the installation of assembly 'Microsoft.ConfigurationManager.AssetProvider.dll,Version="5.0.0.0",Culture="neutral",PublicKeyToken="31bf3856ad364e35"'. Please refer to Help and Support for more information.
ccmsetup 15/09/2014 14:19:29 6524 (0x197C)
client.msi.log
MSI (s) (E0:E0) [14:19:29:448]: Note: 1: 1708
MSI (s) (E0:E0) [14:19:29:448]: Product: Configuration Manager Client -- Installation operation failed.
MSI (s) (E0:E0) [14:19:29:448]: Windows Installer installed the product. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (E0:E0) [14:19:29:448]: Deferring clean up of packages/files, if any exist
MSI (s) (E0:E0) [14:19:29:448]: MainEngineThread is returning 1603
MSI (s) (E0:A0) [14:19:29:463]: RESTART MANAGER: Session closed.
MSI (s) (E0:A0) [14:19:29:463]: No System Restore sequence number for this installation.
=== Logging stopped: 15/09/2014 14:19:29 ===
At this moment no client is installed, I'm trying to install SCCM 2012 R2 Client. Previously there was an agent installed.
I manually ran ccmsetup /uninstall , rebooted and tried install
I have deleted old registry keys and old folders and tried to reinstall
I have check HKLM\COMPONENTS -> this key does not exist
I'm not able to figure out what is wrong with the machine... any idea would be more than welcomeHello,
I noticed that there is a log we can refer to:
C:\Windows\CCM\Microsoft.ConfigurationManager.AssetProvider.InstallLog
Since the client software is not installed successfully, I'm not 100% sure if the folder persists.
In addition please check event log. Pay attention to those logs regarding WMI. -
"Errors Found During Burning Process"
Hi,
Having sucessfully burned AVI movies using iDVD in the past I have started getting errors. iDVD now does the same thing regardless of the movie i'm trying to burn and the media I use.
Having selected Best Quality (due to the film size), the menu rendering works fine, as does the prolonged job of encoding the video. When iDVD gets to the Audi encoding bit, just before it starts to burn the DVD itself, iDVD ejects the disc and states: Errors Found During Burning Process.
Clicking on the arrow to get more info it states: "The recording device reported the hardware error: Tracking servo failure. (0x09, 0x01.)" Bizarrely, the main iDVD progress window states both 'Cleaning Up' and 'Writing Lead-In' and the only way to get out if it is to force quit.
I've read a few posts on here and tried a couple of things such as trashing the plist file and reparing permissions. I also booted up the diagnostic disc to see if it could see a problem with the optical drive. But nothing has solved the problem.
Any ideas?
For reference, I'm running iDVD 5.0.1 on Tiger on a 1.8 G5 iMac with 1GB RAM.
Appreciate any help you can give me.
NeilColleagues:
Ran into the same error, # -34506. Definitely frustrating as I was burning a DVD of an iMovie that I'd spent many hours editing. The iMovie is only 30 miniutes in length, so I don't think it's a size issue. iDVD went through each one of it's steps in burn DVD sequence. However, 45 minutes later when processing is finished, the message reads: "Burning Finished, Errors were found during the burning process." Clicked to see the detail: "The error # -34506 was reported." Checked the DVD and nothing was burned!!! The same thing happens when I opt for disk image. No img file is produced. This is especially frustrating as it looks like it all but completed processing.
Does anyone know what Error # -34506 specifically indicates? How do you fix this? Does it only happen in a specific sequence? And, is Apple aware of the problem?
Thanks! -
Error occurred during the login process
Error: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient
Data Provider)Step 1: Open SQL Server Configuration Manager
Go to Windows 8 Start screen.
Start typing in SQLServerManager11.msc if you are looking for SQL Server 2012 configuration manager. Type in SQLServerManager10.msc if you are looking for SQL Server 2008 configuration manager.
In the result panel you can see the SQLServerConfiguration Manager.
Click the icon to launch the SQL Server Configuration manager.
The configuration manager will open in MMC.
Step 2: Enable following configuration settings
ensure Shared Memory protocol is enabled
ensure Named Pipes protocol is enabled
ensure TCP/IP is enabled, and s ahead of the Named Pipes in the settings
http://dotnetguts.blogspot.com/2014/05/a-connection-was-successfully.html?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+DotnetGuts+%28Asp.net%2C+C%23%2C+.Net+Framework%2C+SQL+Server+Information%29
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/ -
Hello everyone:
I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
Reason Code: 23
Reason:
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
There is nothing in the EAP logs that is obvious too:
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
So, basically, the sequence is this:
request , challenge, request , challenge, request, reject
Any idea what might be happening?
Thank you.Hi,
Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
Here is an article about the Certificate requirements of PEAP,
Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
http://support.microsoft.com/kb/814394
If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
To export a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree under the logical store that contains the certificate to export, click
Certificates.
In the details pane, click the certificate that you want to export.
On the Action menu, point to
All Tasks, and then click Export.
In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
Provide the following information in the Certificate Export Wizard:
Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
If required, in Password, type a password to encrypt the private key you are exporting. In
Confirm password, type the same password again, and then click
Next.
In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
Next, and then click Finish.
To import a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree, click the logical store where you want to import the certificate.
On the Action menu, point to
All Tasks, and then click Import to start the Certificate Import Wizard.
Type the file name containing the certificate to be imported. (You can also click
Browse and navigate to the file.)
If it is a PKCS #12 file, do the following:
Type the password used to encrypt the private key.
(Optional) If you want to be able to use strong private key protection, select the
Enable strong private key protection check box.
(Optional) If you want to back up or transport your keys at a later time, select the
Mark key as exportable check box.
Do one of the following:
If the certificate should be automatically placed in a certificate store based on the type of certificate, click
Automatically select the certificate store based on the type of certificate.
If you want to specify where the certificate is stored, select
Place all certificates in the following store, click
Browse, and choose the certificate store to use.
If issue persists, you may try to re-issue the certificate.
For detailed procedure, you may refer to the similar threads below,
Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support
Maybe you are looking for
-
I have eight student servers running 10.5.4, and I would like to search the home directories for specific files to delete. For instance, in Tiger I could do a simple search for "com.apple.desktop.plist", get a nice list from all student homes where I
-
Financial Reporting - PDF has not been configured for this web server.
When I try a Print Preview of my report, I received this error "PDF has not been configured for this web server". As far as I know, this error is confusing because when I look on my log files I found this: --- FRLogging.log --- [APP: FINANCIALREPORTI
-
"close internet explorer" when trying to download
I'm trying to download the latest version of adobe flash player. I have Windows 7 and Internet explorer 10. The message "close internet explorer" keeps popping up during the installation, even when explorer is closed. I'm not sure what to do.
-
Does anyone know why my facetime isn't working? I've downloaded it onto my macbook, my contacts have come up but when I press on the name nothing happens!! Pleaseeeee help, my partnr has left to work in Spain today and I'm trying to make contact!
-
How to print 1.25756 into 1.26? Is it using DecimalFormat?