Error 2028 customer not found , SBO 2007

I get error an error sometimes when creating sales order through the SDK
Error Detail:
2028 customer not found
However the customer does exist and lot of sales order were created of the same customer
Any hint
Sincerely yours
Riade Asleh

Hi Riade,
Just check for spelling mistakes and if all the other data is in place.
Regards,
Vasu Natari.

Similar Messages

  • 'Customer Not found' error during inbound delivery

    Hi Experts,
    During creation of inbound delivery(IBD) with transaction VL31N (against normal PO with doc. type NB), we are getting following error.
    Customer  not found
    Message no. 8B519
    Diagnosis
    No entry found in KNA1.
    Procedure
    Please contact your system adiministrator
    As per our understanding there should not be any connection for IBD & Customer master. Moreever we are getting this error for Only Brazil Plant. IBD works fine for India & Argentina plants.
    Requested to provide any possible clues.
    Regards
    Manoj

    Hi Manoj
    This error messag should be realted to the Brazilian localization...
    and th e problem reported should be  in the table J_1BTVAKV,  If you don't need a Nota Fiscal in the step of process, you should not assign the Nota Fiscal type  to sales doc type .
    Please correct your configuration and perform a new test.
    Regards,
    Mauro

  • Error 7: File not found occurs in 8.2 from transition of 4.1. Specifying the file in file dialog returns error although file is in the directory.

    Copied a program from 4.1 to 8.2 recently and receive an error 7: File not found at open file+.vi.  The program is built so a file dialog will pop up and ask for the destination of the file.  Eventhough there is a file in the specified directory, an error is returned.  Running open file+.vi by itself returns no error with the same file designation.  Any clues?

    noviceak,
    Welcome to the NI Discussion Forums.
    I created a quick VI in LabVIEW 4.1 that displays a file dialog and then passes that file path to "Read Characters from File.vi" (which in turn calls Open File+.vi).  I then opened this file in LabVIEW 8.2 and ran it successfully (see code screenshot below).
    When you say there is a file in the specified directory are you using the file dialog to browse to the directory or to select the specific file?  Open File+.vi expects the path to a file rather than a directory - that is C:\folder\file.txt rather than C:\folder.  You might also want to create an indicator or probe to see what path is being passed to Open File+ to ensure it is what you expect.
    I feel like I should also say that in the days (years) inbetween LabVIEW 4.1 and 8.2 the file operation VIs have changed significantly.  While the old Open File+.vi still lives in vi.lib for compatibility purposes we no longer recommend using it for new applications.
    I hope this helps and again, welcome to the community.
    Regards,
    Simon H
    Applications Engineer
    National Instruments
    http://www.ni.com/support/
    Message Edited by Simon H on 01-18-2007 08:01 PM
    Message Edited by Simon H on 01-18-2007 08:03 PM
    Attachments:
    LV4 File Dialog.png ‏3 KB

  • Itunes install error message - program not found ...x64/difxinst64.exe

    itunes install error message - program not found ...x64/difxinst64.exe
    no problems with ITunes on Dell Inspiron Windows 7 until yesterday.  ITunes version 11.0.2.  iphone won't connect stating required software is not installed.  uninstall and install 64 bit version of iTunes.  I have 64 bit version already.  I have uninstalled and reinstalled 5 times already.  When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe.  file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel.   iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again.  therefore, I can't sync my iphone with iTunes until I figure this out.
    can't win for losing.  had iTunes on my windows 7 laptop for 4 years.  first time I've ever encountered this.

    I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
    [code]
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\.exe]
    @="exefile"
    "Content Type"="application/x-msdownload"
    [HKEY_CLASSES_ROOT\.exe\PersistentHandler]
    @="{098f2470-bae0-11cd-b579-08002b30bfeb}"
    [/code]
    Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

  • Calendar Server installation gets error "libnmspr20.dll not found"

    Calendar Server installation gets error "libnmspr20.dll not found"
    <P>
    When installing Calendar Server 3.5 on NT near the end an error
    occurs: "libnmspr20.dll not found " and then it will exit the setup
    without completion.
    This is a bug because it is looking for the libnmspr20.dll in the
    system path but the Calendar Server installation has left it in a
    temp directory. This does not occur if the Netscape Messaging Server
    has been previously installed on the same host. A workaround is, when
    the error message displays, you DON'T press ok, but search your
    computer for the missing file (usually found in temp-directory).
    You then copy the file to a directory in your system path. Now you
    can press the OK button and the installation will fail. Re-install
    the calendar server, this time the installation won't fail.

    Installing Latest JRE on NT4 sp6a produces the same error:
    InstallShield DLL Custom Action:
    File 'C:\TEMP\RegUtils.dll' can not be found. Make sure the file is on the target system or installed already.
    I searched www.installshield.com since the error is an installer error and the installer is InstallShield. NO results found there either.
    Seems like the installer team needs to brush up on the NT4 platform.

  • CAUFVD gets initialized result in dump with error Production ord not found

    Hi All,
    We want to make change of start date and end date of a production order via CO02 (Production order change). Based on these changes we want to update an existing a Purchasing Planned Order  Start Dt and Finsih Dt (MD12) 
    We are using Enhancement component (PPCO0007) : Exit when saving production order
    Within this exit we are using BAPI_PALNNEDORDER_CHANGE  to update some other purchasing  planned order dates.
    The BAPI_PALNNEDORDER_CHANGE  is executing succesfully however the production order structure (CAUFVD)  gets initialized resulting in dump with error Production order not found
    How can we update and save a purchased planned order and also the  production order
    Barada
    Edited by: barada satapathy on Dec 8, 2010 9:14 AM

    Hi Max,
    Thanks for the reply...
    The error details are as below:
    Dump gets generated via program : (SAPLCOBT).
    Exception condition ORDER_NOT_FOUND raised.
    include = LCOBPU16.
    Row No: = 21.
    Module Type = (Function)
    Module Name = CO_BT_ORDER_DET_TEMP
    We also give brief details on what is happening:
    My exit calls from Standard (LCOZVU01) :
    CALL CUSTOMER-FUNCTION '001'
               EXPORTING
                    header_imp = caufvd
               IMPORTING
                    header_exp = caufvd_tmp
                    no_update  = answer.
    *     Check if update of header necessary and allowed
          IF caufvd-aufnr EQ caufvd_tmp-aufnr AND
             caufvd       NE caufvd_tmp.
            PERFORM caufv_upd(saplcobh) USING caufvd_tmp.
          ENDIF
    When BAPI for planned order is executed within the exit, the structure (caufvd) values are found refreshed. This structure is further updating the production order.

  • ERROR: OUI files not found at their expected location. while cloning 11.5.9

    Dear Friends,
    Getting error when cloning 11.5.9 from PROD to DEV:
    ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
    <iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
    Restart adclone.pl after performing required corrections.
    I applied the patch 5035661 also but still the error exists.
    Please let me know the fix.
    [appldev@betestoracle bin]$ perl adcfgclone.pl appsTier
    First Creating a new context file for the cloned system.
    The program is going to ask you for information about the new system:
    Enter the values for the new APPL_TOP Context:
    Does the target system have more than one application tier server node (y/n) [n] ?:
    Is the target system APPL_TOP divided into multiple mount points (y/n) [n] ?:
    Target system APPL_TOP mount point [apps/applprod/prodappl]:/apps/DEV/devappl
    Target system COMMON_TOP directory [apps/applprod/prodcomn]:/apps/DEV/devcomn
    Location of JDK 1.3.1 on the target system [usr/java/jdk1.3.1_10]:
    The new context file has to contain port numbers related to target system.
    Do you want to preserve the port values from the source system on the target system (y/n) [y] ?:n
    Clone Context uses the same port pool mechanism as the Rapid Install
    Once you choose a port pool, Clone Context will validate the port availability.
    Enter the port pool number:[0-99]
    50
    Checking the port pool 50
    done: Port Pool 50 is free
    Web Listener port is 8050
    Complete port information available at /apps/DEV/devappl/admin/out/PROD_betestoracle/portpool.lst
    Backing up /apps/DEV/devappl/admin/PROD_betestoracle.xml to /apps/DEV/devappl/admin/PROD_betestoracle.xml7.bak
    Creating the new APPL_TOP Context file from :
    /apps/DEV/devappl/ad/11.5.0/admin/template/adxmlctx.tmp
    The new APPL_TOP context file has been created :
    /apps/DEV/devappl/admin/PROD_betestoracle.xml
    Log file located at /tmp/CloneContext_05131045.log
    Please enter the APPS password:
    apps
    Running Rapid Clone with command:
    perl ./adclone.pl java=/apps/DEV/devcomn/util/jre/1.1.8 mode=apply stage=/apps/DEV/devcomn/clone component=appsTier method=CUSTOM appctxtg=/apps/DEV/devappl/admin/PROD_betestoracle.xml
    ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
    <iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
    Restart adclone.pl after performing required corrections.
    Starting application Services for PROD:
    Running:
    /apps/DEV/devcomn/admin/scripts/PROD_betestoracle/adstrtal.sh APPS/<appspwd>
    Regards,
    DB

    ERROR: OUI files not found at their expected location.Please see these docs.
    Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1] -- adcfgclone.pl appsTier fails with "ERROR: OUI files not found at their expected location"
    Preclone DBtier Fails: Error: Oui Files Not Found [ID 739589.1]
    Troubleshooting Guide and Known Issues List for the Oracle Application Management Pack for Oracle E-Business Suite [ID 812294.1]
    Application Management Pack for Oracle E-Business Suite Release 2.0.x Troubleshooting Guide [ID 412044.1]
    Thanks,
    Hussein

  • HTTP Error 404.3 - Not Found The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.

    Well this morning I woke up to see that my site hosted on Windows Azure was producing 50X errors and in general being incredibly slow (up to 60 seconds response time).
    Now after looking through the DetailedErrors folder I see that the error received is:
    HTTP Error 404.3 - Not Found The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
    I tried creating a new test website and host it and guess what? I receive the exact same error here as well.
    What could be causing this?

    hi,
    Do you use windows azure website in Europe ? According to azure dashboard shown,
    Some customers may experience intermittent time out errors or slow response when accessing their web sites. Please see this image: 
    And now, you could try it again.
    If I misunderstand, please let me know.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • ERROR "Group Public not found" when I run project TutWD_FlightList

    Hi everyone,
    I created Web Dynpro project TutWD_FlightList exactly as tutorial "Creating a Web Dynpro Application Accessing ABAP Functions ".
    I chose "Data type"  for "Dictionary Meta Data" and "Destination type" for "Load-balanced connection",  when I  clicked test connection, the error information as follow:
    com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM  TYPE=B MSHOST=sapserver GROUP=PUBLIC R3NAME=I01 MSSERV=sapmsI01 PCS=1 <b>ERROR       Group PUBLIC not found</b> TIME        Thu Mar 01 16:57:35 2007 RELEASE     640 COMPONENT   LG VERSION     5 RC          -6 MODULE      lgxx.c LINE        3531 DETAIL      LgIGroup COUNTER     2
    It seems that the nature reason is "<b>Group Public not found</b>".
    But I had created the "Public" group with transaction SMLG in related R/3 system,
    and I can logon R/3 via "Public" group both on my laptop and on WebDynpro server. So I think "Public" group is ok.
    The error information for "Ping" is :
    Failed to ping JCo destination 'WD_FLIGHTLIST_MODELDATA_DEST'.
    Is there any friends meet the same problem ?
    Could you please give me any suggestion ?
    Thanks !
    Best Regards,
    Jianguo Chen

    jianguo,
    Strange... Is Status field for PUBLIC is ok (green) in SMLG?
    If you just want to run tutorial try group SPACE -- as far as I know it always exists.
    Valery Silaev
    SaM Solutions
    http://www.sam-solutions.net

  • XML Publisher Loading data error "Run-Time Error '76' Path Not Found"

    Hi,
    I am trying to preview the PDF output in the XML Publisher Desktop Application.
    I am able to LOAD the data successfully.
    But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
    I am running in Vista OS and MS Office 2007.
    What to be done after this? Do I place the .xml and .xsd in Temp folder?
    Kindly pls help me out in this. It would be really a very great.
    Thanks & Regards,
    Santhoshkumar.M
    Edited by: 882342 on Aug 31, 2011 3:24 AM

    You must give your user full control to C:\program files\Oracle i.e. the folder where your BI Publisher or XML Publisher Desktop is installed, see http://boardreader.com/thread/xml_publisher_error_Run_Time_Error_76_Pa_lsptXmonb.html

  • Preverify doesn't work. Always return error 2 "File not found"

    Hello,
    I have this configuration:
    - Latest JDK and JRE
    - Ubuntu Linux 7.10 64 bits
    - NetBeans 6RC2 Mobility Pack
    When I try to build a project, NetBeans returns:
    Preverifying 6 file(s) into /home/alfredbaudisch/NetBeansProjects/GameBuilderDemo2/build/preverified directory. 
    java.io.IOException: Cannot run program "/home/alfredbaudisch/Desenvolvimento/Utils/WTK2.5.2/bin/preverify": java.io.IOException: error=2, File not found
    Then I downloaded WTK 2.5.2 by myself and tried to build it using the toolbar:
    Creating project "GameBuilderDemo2" 
    Place Java source files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/src" 
    Place application resource files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/res" 
    Place application library files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/lib" 
    Settings updated 
    Project settings saved 
    Building "GameBuilderDemo2" 
    java.io.IOException: Cannot run program "/home/alfredbaudisch/Desenvolvimento/Utils/WTK2.5.2/bin/preverify": java.io.IOException: error=2, File not found 
    Build failed  Any suggestion?
    Thanks.
    Edited by: AlfredBaudisch on Nov 25, 2007 1:36 PM

    The problem was that WTK was not accepting JRE 64-bits, then I installed JRE 32-bits and set up WTK to look for it.
    I wrote an article about the platform Ubuntu + NetBeans 6:
    http://mobiledeveloper.auriummobile.com/index.php/2007/11/25/perfect-java-development-platform-with-ubuntu-710-and-netbeans-6/
    Edited by: AlfredBaudisch on Nov 25, 2007 6:47 PM

  • Hp 5535 will not scan, error message printer not found

    I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
    This question was solved.
    View Solution.

    Hi @prazdancr,
    Welcome to the HP Forums!
    I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
    For further assistance I will need to know:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies by itself.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
    Hope to hear from you soon, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I want to add refworks grabit to my tool bar, when I try to install for firefox it won' t let me this is what I get: HTTP Error 404.3 - Not Found The page you a

    this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
    Error Summary
    HTTP Error 404.3 - Not Found
    The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
    Detailed Error Information
    Module StaticFileModule
    Notification ExecuteRequestHandler
    Handler StaticFile
    Error Code 0x80070032
    Requested URL http://www.refworks.com:80/refgrabit/install.xpi
    Physical Path E:\RefGrabIt\install.xpi
    Logon Method Anonymous
    Logon User Anonymous
    Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
    Most likely causes:
    It is possible that a handler mapping is missing. By default, the static file handler processes all content.
    The feature you are trying to use may not be installed.
    The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
    If ASP.NET is not installed.
    Things you can try:
    In system.webServer/handlers:
    Ensure that the expected handler for the current page is mapped.
    Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
    Pay extra attention to typographical errors in the expected handler line.
    Please verify that the feature you are trying to use is installed.
    Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
    To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
    The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
    For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
    Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
    Install ASP.NET.
    Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
    Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
    View more information »

    That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

  • Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

    Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
    Sorry for the long title, first time poster here.

    This thread is pretty old, are you still having this issue?

  • Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

    Hi All,
    My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
    Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
    Message NO k5011.
    As this is more ralaing to the costing sheet, this refers to controlling module.
    We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the  6.0 verion.
    Can anybody suggest the reason for the above error.
    Thanks & Regards
    Shankar

    HI,
    whats the message class, message number?
    BR Christian

Maybe you are looking for