Error #2032 Failed to download Platform configuration in BOBJ

Hi,
During accessing report under BOBJ in Internet Explorer. I am getting an error of #2032. I searched in internet for solution, which all implied with the problem in IE but I updated/ reinstalled the IE. But still the problem exists. Can you please suggest to resolve this problem.
Thanks,
Best Regards,
Darshan MS

Hi Darshan,
Try this.
In toolbar of the Microsoft Windows Internet Explorer, choose Tools -> Internet Options. The Internet Options window appears.
In the Settings section of the Advanced tab, navigate to the Security list, and deselect the checkbox Do not save encrypted pages to disk.
Save your change.

Similar Messages

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

Which files do you have in the defaults\pref folder in the Firefox program folder?
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
See also "Other solutions":
*http://kb.mozillazine.org/Preferences_not_saved
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

Which Fx version? When you uninstalled Fx, did you reboot computer before reinstall?
Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
Is your profile in the default location or custom location?
Have you tried creating a new, completely clean profile - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

Error messages: "itunesobjspl/jenetsvc.dll The specified module could not be found." And Error -2032 "Quicktime failed to initialize."

I initially got the Error -2032 message after downloading the newest version of itunes. I read a geek blog that said to uninstall Quicktime and I did that a bunch of times. I also uninstalled and reinstalled itunes repeatedly. None of this works. I noticed that the apple website said the requirements for the new quicktime/itunes download included an intel processor and I have a celeron processor, so I wondered if that was the problem, although everything has been running fine up until now, so I don't know. It also doesn't address the missing .dll file, but I may have accidentally deleted that because I went into the registry to try and unload some Quicktime files when I uninstalled Quicktime. I did this at the suggestion of the blog, but I may have screwed it up. Now I need to repair the missing .dll and still try to get itunes running

ErikEJ wrote:
Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
ErikEJ wrote:
Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
Hello everyone,
I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application. I developed a window application in VS2005 and want to import a dll file from another program into my project and use it. But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll". I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project. Can anyone help me out with this? thanks and really appreciated!
Here is how I import the dll:
[DllImport(@"D:\elev.dll")]
//[DllImport("emap.dll", SetLastError = true)]
private static extern void EMA_Init();
and in the code, I call the function above but failed to load the dll file
EMA_Init();

Mac app store error message failed download.

When I try to download an app from the Mac App Store I get an error message "failed to download use the purchases page to try again".
How do I fix this problem on OS Mavericks 10.9.4?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

SCCM Fails to download updates

I was starting to post this as a question but I just got it working. The updates for my SCCM install were failing to download.
I found the log sample below from the patchdownloader.log
Log Sample Start:
HttpSendRequest failed HTTP_STATUS_NOT_FOUND $$<Software Updates Patch Downloader><Fri Aug 08 11:45:44.690 2008 Eastern Daylight Time><thread=2292 (0x8F4)>
Download http://www.download.windowsupdate.com/msdownload/update/v3-19990518/cabpool/exchange2003-kb931978-x86-chs_df730b4a221003767fd252d7ab255825055adc7f.exe to C:\TEMP\CAB412.tmp returns 404 $$<Software Updates Patch Downloader><Fri Aug 08 11:45:44.690 2008 Eastern Daylight Time><thread=2292 (0x8F4)>
ERROR: DownloadContentFiles() failed with hr=0x80070194 $$<Software Updates Patch Downloader><Fri Aug 08 11:45:44.690 2008 Eastern Daylight Time><thread=5096 (0x13E8)>
After validating WSUS was working and the ability to download the updates outside of the wizardI ended up going back to my most recent packages
Repointed my download location from internet on a new test package/update list to a pointless network location a couple of times, repointed to the internet and I got a partial download
I deleted and recreated one package and modified its package source share path. I am not sure how unique that path has to be per deployment package but I made the path definitely unique to this package. Once that Deployment Package was recreated my downloads appeared to work correctly.
I also did not know that the initial download is processed through the system variable temp directoy on the site server

While downloading new Software Update Group, I was also facing same errors in SCCM 2012 SP1. How it was resolved or a work around was applied is by segregating the updates released in each month.
Errors:
"HttpSendRequest failed HTTP_STATUS_NOT_FOUND"
"Download http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2014/07/windows6.1-kb2918614-ia64_ea0909c226c16fa4217e673486fccba109a3e529.cab to C:\Users\Admin\AppData\Local\Temp\CAB209E.tmp returns 404"
"ERROR: DownloadContentFiles() failed with hr=0x80070194"
Initially, it seemed to be related to proxy configuration on SUP or WSUS level but after bypassing proxy and configuring direct routes to Internet - the error was still there.
This was actually related to some specific Security Updates for Itanium-based processors. Downloading such updates released during July and August, 2014 only, were faced with errors.
However, the x64 versions of these failing updates got downloaded successfully.
Probably the failing packages were moved or renamed on mentioned website, due to which patch download was giving errors.
The above has worked for my environment, best of luck for yours.
Kindly "Vote as Helpful" or "Mark as Answer" - if it helps. [Sanaullah Mir, MCTS Exchange & Lync]

Failed to load the configuration file for the workflow

Hi experts, yesterday I created and publish custom workflow using SPD from client pc using site administrator account but today its shows error message. I tried creating new test workflows, edit and publish to think it will push a fresh SPD settings
in working condition and it works pretty right.
But the thing I noticed after closing SPD Im not able to re-open workflows and it gives the same error message Failed to load the configuration file for the workflow. This issue only happen today since day one I used SPD and all the time
Im using the same pc.
Any ideas will be appreciated.
Cheers, R2C3 ----------------------------------- starting sharepoint :)

HI
Maybe you have permission problem or there is invalid xoml murkup.
To verify this from SharePoint Designer use the following steps.
In Office SharePoint Designer, in the folder list, select the plus sign next to Workflows library to expand it
1.Next select the plus sign of the workflow in question to expand it
2.Double-click the configuration file (Workflow_name.xoml.wfconfig.xml) to open it
3.Right-click on the page, and then select Verify well-formed XML
4.Correct any errors and save the file
5.Reopen the workflow to test
Also double check that you are using SPD with the same credentials you created workflow
Hope this will help.
Regards,
Marcin

Iphoto for mac fail to download

my iPhoto fail to download in my macbook air

I continue to make click the "install" within the purchase tab of the APP Store. At 10MBs it will reset itself to "calculating" and attempt to begin again. After 3 or 4 attempts the error message "failed to download, try again from the purchase page" its an endless circle. I have attempted to all provided tips on this page: 1) delete the apple.com, 2) reset downloads, 3) go into systems settings and click on the security and privacy/filevault. I reboot everytime to ensure the changes go into effect. I return back to square one.
Is there a step or something that may resolve this?

Adobe Widget Browser 'error 2032'

XP, latest updates, antivirus turned off, firewall turned off (just to make this work, these are usually turned on).
DW5
After reading some threads on above topic I still have not found a solution. I am sorry for posting something that has been addressed before but this is clearly not working. At least, I can not make this work. I tried about everything I can think of now.
What I did so far:
I sign in.
In the top portion of the Widget Browser, I can see I am logged in.
I get a list of widgets.
When I select a widget, the widget is openened and the download starts. After a few seconds, I get the message "There was an error downloading the widget, error 2032" and the download stops.
I disabled my antivirus.
I disabled the firewall.
And tried again.
Nothing worked.
I created a new Adobe account.
That didn't help either.
I thought it might have something to do with the browser and turned on cookies.
Didn't help.
I have been trying to get this to work all day yesterday and today, taking up serious time. And I finally am at my wits end. Any input anyone?

Hello,
the application became controversial. And therefore the Adobe download is very difficult to find. Nevertheless, here are is a link from "outside": http://lib.giveawayoftheday.com/Adobe_Dreamweaver_Widget_Browser_1747830/
BUT I want to quote this objection (Nancy O.):
"My advice is to find a modern jQuery gallery plugin you like. There are scores of them on the web. See primer below for details on using jQuery plugins: http://alt-web.blogspot.com/2012/11/primer-for-using-jquery-plug-ins.html"
... and the answer to my "widget-defends" : "most of the "wigets" you will find in my link from above, are already " jQuery"-based": "But they're much older jQuery (1.2 or 1.4). The latest jQuery ver is 1.9 soon to be 1.10. Or the widgets are built with outdated Spry, which often leads to poor results in newer devices."
And now judge for yourself.
Hans-Günter

CCMSETUP "failed to download files through BITS"

Hi
I'm strugling with my SCCM Clients.
We use:
ConfigMgr 2007 SP1. Client version 4.0.6221.1000. Mixed mode, one site. Server installed on Windows 2003 R2, database clustered. Client are Windows XP Pro with SP3. Site has been published in AD.
Push Client Deployment works fine.
First I tried to deploy the client with Group Policy. Stopped with "failed to download files through BITS"
Then I tried to deploy the client with a script, and finally manually. Got the same error message:"failed to download files through BITS".
End of log file looks like this:
Starting BITS download for client deployment files
Failed to download files through BITS
A Fallback Status Point has not been specified. Message with STATEID='309' will not be sent
Kind of stuck here. Please help!

I solved the "BITS" problem. There was another web-application on the site-server that altered the permissions on the "Default Web Site". The CCM_CLIENT properties had "Script and Executables" selected for "Execute permissions". I Set this back to "None".
Now trying to deploy the client via GPO another error came: "Installation failed because another program is installing (1618)". This was during the wingapi.msi installation.
When a new Window XP Pro Computer is installed various applications are installed from GPO and also Office 2007 scripted. I guess this is a challenge for the ConfigManager Client Bootstrap installation.
So then I tried to deploy the client from startup script, setting the Policy "Maximum wait time for group policy script =0 (infinite)" and the policy "Run startup script asynchronously" = Disabled. This Works!!
The script will fire each time it boots until it is installed. The GPO installation will not retry to install. Therefore I think a script is a safer way to deploy the client.
I will test more on this.
Thanks for pointing me in the right direction!
-frode

Software Updates ADR Issue: "Failed to download the update from the internet. Error = 5"

"Failed to download the update from internet. Error = 5"
The above is the error I am getting when running any ADR. The error is quite clear software updates are failing to download and Error = 5 being a permissions error its clear that the downloads are failing due to incorrect permissions applied to the download
path.
Here is the last bit of my ruleengine.log, everything above is the same except for the update trying to be downloaded of course:
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download ContentID 16860969 for UpdateID 16857152. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading contents (count = 1) for UpdateID 16857255
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
List of update content(s) which match the content rule criteria = {16861141}
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading content with ID 16861141 in the package
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download ContentID 16861141 for UpdateID 16857255. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download any update SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Failed to download update contents. SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
No new update was added to the package. Package "SCP0008A" would not be updated.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to run the DownloadAction for the AutoDeployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=SCCM-MPS.DSCICORP.COM SITE=SCP PID=2376 TID=5148 GMTDATE=Thu Jun 26 13:22:00.164 2014 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more
content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Enforcing Create Deployment Action SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>SCP00055</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>0</Duration><DurationUnits>Hours</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>true</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>true</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>true</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplaySoftwareCenterOnly</UserNotificationOption><LimitStateMessageVerbosity>false</LimitStateMessageVerbosity><StateMessageVerbosity>10</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>true</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test
ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Rule XML... SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element DeploymentId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupName SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
SQL is: select cis.CI_ID from vCI_ConfigurationItems cis join vProvisionedCIs pci on cis.CI_ID = pci.CI_ID where cis.CI_ID in (16793068, 16793070, 16793441, 16793445, 16793531, 16793686, 16793688, 16794597, 16794600, 16794602, 16794604, 16795443,
16795445, 16795709, 16795711, 16796210, 16796222, 16796292, 16796298, 16799495, 16799503, 16799602, 16799700, 16799703, 16799705, 16799712, 16799718, 16800300, 16800302, 16800367, 16800369, 16800371, 16800375, 16801224, 16801227, 16801237, 16801239, 16801287,
16801289, 16801559, 16801566, 16801996, 16802034, 16802839, 16802841, 16803306, 16803310, 16803420, 16803422, 16806477, 16806479, 16809354, 16809360, 16809393, 16809397, 16809774, 16809786, 16809792, 16813338, 16813348, 16813636, 16813638, 16814948, 16814950,
16815151, 16815153, 16817088, 16817102, 16817108, 16817398, 16817400, 16818677, 16818691, 16825397, 16840448, 16840458, 16840460, 16840462, 16840690, 16840700, 16840702, 16840710, 16840824, 16840826, 16842640, 16842641, 16842802, 16842803, 16842841, 16842870,
16842871, 16842896, 16842917, 16843017, 16843042, 16843049, 16843051, 16845981, 16846404, 16846751, 16846757, 16848017, 16848021, 16848664, 16848687, 16849383, 16849385, 16852506, 16852514, 16852516, 16855484, 16857102, 16857151, 16857152, 16857255) order
by cis.CI_ID SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
0 of 115 updates are downloaded and will be added to the Deployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Enforcing Actions for Rule 16777228 failed!
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Updated Failure Information for Rule: 16777228
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Deleting Rule 16777228 SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\16777228.RUL
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5148 (0x141C)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Refreshed ScheduleList instance for Rule (16777228) from schedule string () with next occurence (12/31/1969 7:00:00 PM)
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
FindNextEventTime found next event for RuleID 0 as :1/1/2038 12:00:00 AM
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
RuleEngine: Got next rule execution time successfully. Next event is in 12369097 minutes
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Sleeping for 15 minutes SMS_RULE_ENGINE
6/26/2014 9:22:10 AM 5228 (0x146C)
Also, I do not have a patchdownloader.log anywhere, Ive checked all aforementioned locations from various sources and it just simply does not exist on my SCCM server. Here is my setup:
Server1: Primary server with all roles installed locally except the site database is on its own server. WSUS is installed locally here and DB is stored here.
Server2: SQL DB for Primary site DB
Server3: Secondary remote site running MP, DP, SUP. DB is SQL Express local.
So the SUP role was installed successfully on both server1 first and server 2 second with the site servers accounts. The SUP Synchronizes successfully and I can see a large list of updates available for use but not downloaded of course. I have set WSUS option
to store updates locally and have plenty of space at the target destination.
So here is my issue, I have been working on this issue for the better part of a week and understand the error code from the ruleengine.log to be a permissions issue. I have also proved this out but creating a test ADR with minimal updates and applied NTFS perms
to the target path for Modify with the everyone group (testing purposes only). The updates downloaded successfully. So this puts me right back to where I was, knowing its a permissions issue but not understanding what permissions are needed. Let me explain
further.
The best way to start is to show what perms I have to the target location for downloads/wsus/sup anything:
Path: \\Server1\UpdatesAndDefinitions (permissions being applied to the UpdatesAndDefinitions root folder)
SCCMAdmin (account used for most SCCM tasks except for NA) / Modify / Share and NTFS
Server1$ (primary site server) / Modify / NTFS
Everyone / read and execute / NTFS and Share
There are other system generated perms but the above three are the important ones. So hence my confusion I know that the SCCMAdmin account or the Server its self has to be accessing the target directory so why is it failing with a permissions issue?
My next step was to enable Auditing on the target path. Doing so revealed just what I thought and through me into further frustration:
A network share object was accessed.
Subject:
Security ID:
SYSTEM
Account Name:
SCCM-MPS$
Account Domain:
DSCI
Logon ID:
0x3e7
Network Information:
Source Address:
fe80::306a:8827:8672:3ba5
Source Port:
50329
Share Name: \\*\UpdatesAndDefinitions
A handle to an object was requested.
Subject:
Security ID:
DSCI\sccmadmin
Account Name:
sccmadmin
Account Domain:
DSCI
Logon ID:
0xad903c
Object:
Object Server:
Security
Object Type:
File
Object Name:
F:\UpdatesAndDefinitions
Handle ID:
0xf5c
Process Information:
Process ID:
0x10cc
Process Name:
C:\Windows\explorer.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
ReadAttributes
Access Mask:
0x20080
Privileges Used for Access Check:
Restricted SID Count:
0
Now I may not be the best I traversing through the mess of audit entry's and translating them, but from what I can see the two accounts that have the proper share and ntsf perms ive listed above are indeed the ones accessing the target location and the audit
code is success. I filter for failures and found no audits for failures whatsoever yet my downloads still fail religiously, unless of course I open myself up with the everyone group.
So next... I tried adding in the Network Service account with proper permissions, the Local Service Account, my user account, and all no go's.
Next... I remove the SUP roles from SCCM checked the logs for deinstall confirmations, and reinstalled these roles. No Go!
If anyone can assist I would be in your debt and very grateful.
Oh last note, but very important note I'm running SCCM 2012 SP1 CU4
Thanks,
Michael
MichaelSpaulding

I just tested with the everyone group further; I added everyone with modify for ntfs and just read only for share and downloads failed!
I then changed the share perms for everyone to change and the ntfs to read/execute and poof downloads complete! Obviously change share perms for everyone leaves me open which Id like to prevent, so finding what account is being used is crucial.
I have already tried adding all of the SCCM accounts I use and the servers themselves as change perms to share and ntfs and have not had any luck.
MichaelSpaulding

Air app install fail in IE with Badge Installer Error # 2032

Much has been written about this problem, and the most quoted solutions are
Ensure the appurl FlashVar is not a relative url but fully qualified http://domain.com/app.air
Uninstall and reinstall Air
Empty browser's cache
None of these have solved my issue and I still have a reproducible bug.
I have set up a badge installer at http://tx.flamjam.com/mms/ which attempts to install appurl=http:/tx.flamjam.com/mms/MMSReview.air
This works beautifully in OS X but fails in Windows with the error window,
Sorry, an error has occurred.
The application could not be installed. Try installing it again. If the problem persists, contact the application author.
Error# 2032
I've tested IE and Chrome, both updated to the most recent versions.
When Air is not installed I get a slightly different error message, with no error number.
The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.
With Air installed, if I instead visit the appurl directly in the browser — http:/tx.flamjam.com/mms/MMSReview.air — the file downloads and installs without problem.
To the best of my knowledge, the error is a generic stream error which essentially means that the appurl could not be found. To demonstrate this, simply use a fictitous appurl and now the same error can be seen on OS X as well. This implies that something is malforming the appurl withing the badge, but I have modified the status display text of the badge to display the appurl parsed from the LoaderInfo object containing FlashVars payload and can confirm that the appurl appears to be consistent between OS X and Win.
Log file in next post.
I'll continue digging for a solution, and post my findings here, but would value other's input on this subject greatly.

An interesting development.
When I monitor my network traffic using ServiceCapture I can see that no attempt is made to connect to the appurl, with the install failing instantly without even attempting to connect to the appurl.
ServiceCapture on OS X confirms the attempt to connect to the appurl even if the url is deliberately fictitous resulting in a 404 response.
The badge begins the installation process using the installApplication method of the following file
http://airdownload.adobe.com/air/browserapi/air.swf
which the badge loads on startup.
It would appear to me that the installation problem is failing inside that loaded swf's code, but I'm at a loss as to how to debug that.

Can't download Photoshop Elements trial Error #2032 appears

I'm trying to download Photoshop Elements trial but instead of the download button appearing Error #2032 appears instead.

if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Restore configuration failed to download from SFTP server

Hi
I am trying to restore the fabric configuration and I am unable to connect to sftp server.
I noticed the following error:
Configuration failed for EPG oob due to Not Associated With Management Zone
Any ideas?

Hi Tomas
Thanks for the quick response.
I think it might be useful if I explain what it is that I am trying to achieve. I have a lab with 2 spines/4 leafs/3 apics. I will be starting a series of workshops to educate my team on the glorious world of ACI.
One of my first sessions will be "how to build a fabric". So I am currently in the process of decommissioning the switches and then issuing the "eraseconfig setup".
After erasing the APIC config the team will build the fabric and then upload the backup configuration from my SFTP server.
So the issue is that I am unable to download the backup file via the GUI.
I have just applied the eraseconfig setup command again I can confirm that it does not build an "External Management Network Instance Profile" from default.
I also have noticed that from a default build the Management Zone error appears.
I have configured the profile but the EPG has not "formed"
At the moment I am unable to download the configuration.
Thanks for your help on this
Ben

Failed to download ContentID Error code = 12029

i receiving this message however i don't have any proxy configured and i can reach the internet from the sccm server also the strange is i am receiving this error not for all updates.
Failed to download ContentID Error code = 12029
any ideas
Ahmed Ali

That error translates to ERROR_INTERNET_CANNOT_CONNECT. See PatchDownloader.log and try to download the patch manually (for testing purposes).
Torsten Meringer | http://www.mssccmfaq.de

Error #2032 Failed to download Platform configuration in BOBJ

Similar Messages

Maybe you are looking for