Error -2041 an invalid sample descripton was found in this movie

have been getting this error message when i try to open mpg4 video files transferred from my samsung e900 mobile when i try to play them on quick time never had any problem before but just started to happen any help greatly appreciated

I have mobile phone Motorola A1000 and over the last year or so have loaded several hunderd videos, all .mp4 file extensions. All worked well until downloaded QT7.2 and got the -2041 error message. Have found via another forum that by replacing .mp4 with .3gp vids can again be viewed. Is there a way to replace all affected files in one sweep rather than one by one, or can Apple say if they'll provide a fix for the problem created by them?

Similar Messages

What does "Error-2041: an invalid sample description was found in the movie"means?

what does "Error-2041: an invalid sample description was found in the movie"means?

I have the exact same problem. I have a PPC 6700, and now I can't view movies I created with it in mp4. If change extension file to 3GP video works just fine.
Also, when I try to see a webpage with a Quicktime video clip, I only get a Quicktime logo with a big question mark in it, but no play.
I tried uninstalling and reinstalling, but nothing seems to work.
I have Windows XP, and it worked fine until a couple weeks ago. Not sure if when upgrading to Quicktime 7.2, though.

Error -2041: an invalid sample description was found in the movie

I just tried to use quick time to open mp4 on my PC (taken from my dopod/HTC pda phone), but NOW get "error -2041: an invalid sample description was found in the movie". I used to be able to watch the vids, but no longer......

I have the exact same problem. I have a PPC 6700, and now I can't view movies I created with it in mp4. If change extension file to 3GP video works just fine.
Also, when I try to see a webpage with a Quicktime video clip, I only get a Quicktime logo with a big question mark in it, but no play.
I tried uninstalling and reinstalling, but nothing seems to work.
I have Windows XP, and it worked fine until a couple weeks ago. Not sure if when upgrading to Quicktime 7.2, though.

Cannot add video - "Error 2002: a bad public atom was found in the movie"

Okay, I've searched around and cannot find anything that works, this is driving me crazy! I converted a file from .avi to .mp4 and am now trying to add it to iTunes so that I can put it on my iPod Touch. When I try to add the file, whether by dragging and dropping the file into itunes or going through the File menu, nothing happens - no error messages, no notifications, nothing. If I try to open the file in Quicktime I get the "Error 2002: a bad public atom was found in the movie" message.
I've tried editing the tags with Tagger, tried the AoA MP4 patch, tried moving the file to a flash drive and adding from there, tried running iTunes in XP compatibility mode... all with no effect. Please, is there anyone that knows how to fix this?

Hello,
This doesn't really solve the problem, but why don't you ask your colleague to resave or export test.3gp?
The new file will probably work. (vs troubleshooting your Windows PC can take ages, to no avail)

Exporting Slide Show- Invalid media was found in the movie

I have been trying all day to send a photo album to Itunes to put on my Ipod. Every time I try I eventually get the message that Invalid Media Data was found in the movie. What does this mean and how to I fix this.

I am having the same problem. I am exporting a slide show (450 pics) and after A LONG TIME (probably double the previous time it took in the previous iPhoto), I get an error message that says 'Invalid Media Data was found in the Movie'. I also thought it might be protected mp3s (I have music with the slideshow) and I found one 'possible' problem song file, but after I corrected it, I get the same error.
I have noticed that iPhoto 09 gives an import error for some types of .jpeg files (in particular those imported after scanning using the Image Capture program). I also noticed as I was editing the slide show that there are 5-6 pictures that come up black when you flip thru them in the viewer/editor. They show up in the scan, but do not in the viewer.
I have run the slideshow in 'play' mode several times without issue. I urgently need this file for tomorrow. If anyone has any suggestions on workarounds today, I would appreciate it.
Mark

'An invalid public movie atom was found in the movie' Error Message

I was just tidying up all the music in iTunes and came across an album that half the songs are unplayable... I get no action with iTunes. I tried opening one of them with Quicktime and I get the following message:
An invalid public movie atom was found in the movie
I wonder if there might be a fix. I have the original CD at home but I am traveling and won't be back for a few months...
Thanks!

I tried to play video clips on from lynda.com and the Q appears but only the audio plays.I am new to Mac and have no idea what to do. The same clips play on my windows pc just fine and that is version 7.3.

Unable to open JPG file, getting "unknown or invalid JPEG marker was found", help needed

Info:
MS Windows 7 Home Premium 64-bit SP1
Adobe Photoshop 64bit CS5 etxended (Version 12.0 x64)
So downloaded some JPG files from the web and trying to use some of them as wallpapers. I am able to open them in Windows viewer and some other prgrams but they are the wrong size for my screen so I wanted to change the resolution and opened them into CS5 and sound that some of them would not open. I am getting the following error "Could not complete your request because an unknown or invalid JPEG marker was found" and yet there does not seem to be anything I can do to resolve this to open them into CS5.
Any thoughts or advice?

Open them into another viewer, copy, then FIle-New in Photoshop and Paste.
Photoshop is picky and a file that does not properly follow the JPEG standards could cause this kind of problem. Other apps are sometimes more forgiving.
-Noel

An invalid public atom was found. *** is an invalid public atom?

While trying to export a movie, at the end of exporting, i get the message...an invalid public atom was found...
That kills the export job i just spent 2.5 hours waiting on (all HD video files, big export job)
Does anyone know what an invalid public atom is and how to deal with them, get rid of them, get around them...or otherwise stop them from killing my exports?

I'm having the same problem. It must because of a recent QuickTime update. I suspect the iTunes 10.5 update is the culprit. I shoot with a FireStore (FS-C) and have 5 Macs that can no longer read any of the .mov files. All the Macs (MacBook,Pro 8,3 / MacBookPro 8,2 / MacBookPro 5,2 / MacBookPro 2,2 / MacMini 4,1) are running 10.6.8 and all were capable of reading the FireStore files...until very recently. The last footage I edited was on October 9th. Somewhere between then and today (October 25th), an Apple update made the .mov files unopenable. When I try to play the files in Final Cut Pro (7.0.3), I get a "General Error" message.
I've installed VLC and the files will all play properly in the VLC player, so the files themselves are intact.
UPDATE: Yes, the problem stems from a recent QuickTime update. This has been confirmed in the following support notice from VITEC:
http://www.focusinfo.com/dynassets/documents/downloads/MACOSX_Supp_Anncmt_10.21. 11.pdf
I'm going to try downgrading my installed QuickTime and I'll post the results.
MattLTH

Error: No valid complaint data was found in this sales area

Hi All,
I am getting below error while delta or request download of customer.
No valid complaint data was found in this sales area
Message no. CRM_SPL_BUPA_FRG0010203
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Message no. SMW3018
Error case:
ECC-->Customer(Sold to) extended to a sales area and saved.
     CRM-->Business partner gets updated in the CRM properly.
ECC--> Deletion flag for same customer and same sales area is set. (Deletion flag - "Selected sales area").
     CRM-->Business partner gets updated in the CRM properly and is not shown as extended to the sales area via BP t code.
ECC-->Deletion flag is removed for the customer.
     CRM--> BDOC fails to update the Partner and goes in error.
Problem comes when deletion flag is removed in ECC.
Any help would be highly appreciated.
Thanks in advance.
-Ram

Hi Ram,
Hope you have not make any field mandatory in the Complaint tab in the sales area section in the BP.
When you are removing the deletion flag please check if any entry is mandatory in the Complaint tab.
Hope this will be useful
Thanks and Regards
DJ

Error -2002: a bad public movie atom was found in the movie

I have a Nikon Coolpix L10 (about 2 years old) that records video in the .mov format.
Most of the time when I play the videos on my computer I used to get a bad flicker and the video would often freeze. When I used a video editing program I found that for every two frames of video there was a black frame.
So I thought maybe Quicktime wasn't 100% compatible with the file type or version. So after some deliberation I got Quicktime Pro and I have the newest version 7.6.5. The flicker is gone but the video still freezes.
So I tried exporting to MP4 or AVI or anything and I keep getting
"Error -2002: a bad public movie atom was found in the movie"
It wont allow me to export the video to a different format.
Sometimes when I cancel the export Windows pops up a screen that it's searching for a reason that the Export Controller stopped working.

Thank you very much for the help. I tried copying and pasting the video file that is a .mov file to my zip drive and then I tried to an .avi file. The reason for doing this is so I can edit it with microsofts windows movie maker. After I had it on the zip drive and tried to export it so I could change the file it still defaults to the error 2002 message saying there is a bad public movie atom. I have done a bunch (5) other movies from the camera and they all worked and then the last one would not. So I assume there is a random factor that happens such as file size or something in the recording that causes the random atom attack. Maybe the difference is not being a mp4. It would be great if there was a definitiion of what bad public atom was and what it meant. Computers and technology is great.
I did another search and found that a person commented on zipping the file. Well I tried to zip it from the external drive I have to my desktop and it would not work. Then I ziped the file again. Saved to a external drive then unziped it to the same external drive. From that file I then did the file export and it went fine. So the moral of the story is if the video you took is important keep searching and trying and thanks for everyones help. Why is it the vendor of the product does not post solutions? Anyway now I can go on making movies and editing them. It must be a file corruption issue so that by moving the 1's and 0's around it fixes it's self. Is it a bug with the camera recording or is a bug with quick time?

My videos are defaulted to Quicktine and I have downloaded the latest QT player but all my movie clips now cannot be played and I get this error message Error-2002 a bad public movie atom was found in the movie.

I have used quicktime player downloads for movie clips made for equipment inspections. However in 2011 I encountered a problem when trying to view previously made movie clips that are in the quicktime player format but they won't play giving the messgae : Error-202 a bad movie atom was found in the movie,
I have downloaded the latest Quicktime player but the problem still remains. However late in 2011 when this problem was encountered I downloaded the the latest QT player download and then could play the movie clips but now the problem is back.
How do I fix this problem.
Regards
Richard

Hello,
This doesn't really solve the problem, but why don't you ask your colleague to resave or export test.3gp?
The new file will probably work. (vs troubleshooting your Windows PC can take ages, to no avail)

Today I tried to open Safari and what I was presented was several minimized windows stating that there was a security error detected, also a suspicious activity was found in my computer. How do I go by in getting this cleared off? Help. Thanks

MAcBook Pro, 2.4 Ghz Intel Core 2 Duo, 4GB 1067Mhz DDR3, Software Mac OS X Lion 10.7.5 (11G63).
Problem: i tried to open Safari about a couple of hours ago and I was presented with this error message block with an address of http://www.virushealthcheck.com. The message is; Windows detected security error, due to suspicious activity found on your computer. Contact Windows Certified Live Tech ( 1.866.606.2003). If I clk the OK button , there are multiple layered windows that will appear after that. Can't get out of it , except to quit Safari. earlier today before this happened I was on Facebook, Instagram, responding email cutting and paste transactions and saving it to Microsoft word. then I turned off my lap top for several hours. When I turned it back on awhile ago, I discovered this problem. on top of that aI can't even clear the history everything is gray out except for the Earlier today, and the day and date of the month. I tried several times to quit Safari, turn off and turn back on my lap top to no avail. My question is; How do I go by to in getting this error message when I click on Safari? Does that mean that I might have a virus in my lap top? Please Help. Thanks.

Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select the Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down.
http://www.thesafemac.com/fbi-ransomware-virus-rampant/

Weblogic 12.1.1 SSL error --No identity key/certificate entry was found under alias server_name in keystore path\ name .jks on server AdminServer

Hi guys,
I installed webloigic 12.1.1 on windows 2003(32-bit);
I was requested add SSL Configuration to console;
I'm using keytool; It is not first time I setup SSL on weblogic console, only version is different;
before I did susssessfully on weblogic 11g(10.3.2-10.3.5) using the same scenario;
My steps:
1.generate key;
keytool -keyalg RSA -genkey -v -alias <server_name> -keysize 2048 -storepass <pwd> -validity 762 -keystore <name>.jks
2. create cert
keytool -certreq -alias <server_name> -file file_name.csr -keystore <name>.jks
after send and return certificate 3 layers;
imported back;
--root--
keytool -importcert -v -noprompt -alias rootca.kbr.com -file root0.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate was added to keystore
[Storing <name>.jks]
keytool -importcert -v -noprompt -alias rootca1.kbr.com -file root1.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate was added to keystore
[Storing <name>.jks]
keytool -importcert -v -noprompt -alias <server_name> -file root2.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate reply was installed in keystore
[Storing <name>.jks]
confufigured weblogic using conosole;
it looks like this in config.xml file
<ssl>
      <enabled>true</enabled>
      <listen-port>7002</listen-port>
      <server-private-key-alias><server_name></server-private-key-alias>
      <server-private-key-pass-phrase-encrypted>{AES}TIRM5RT26K8IZDevCNMexlWp3BuhZaFpi8HEgPaOCrU=</server-private-key-pass-phrase-encrypted>
    </ssl>
    <listen-address>34.64.3.9</listen-address>
    <key-stores>CustomIdentityAndCustomTrust</key-stores>
    <custom-identity-key-store-file-name>path<name>.jks</custom-identity-key-store-file-name>
    <custom-identity-key-store-type>JKS</custom-identity-key-store-type>
    <custom-identity-key-store-pass-phrase-encrypted>{AES}hiemEGOTrjIRvEOnn0+ODuNpWehBbrgb8fydImfyXV4=</custom-identity-key-store-pass-phrase-encrypted>
    <custom-trust-key-store-file-name>path<name>.jks</custom-trust-key-store-file-name>
    <custom-trust-key-store-type>JKS</custom-trust-key-store-type>
    <custom-trust-key-store-pass-phrase-encrypted>{AES}xzP2kU98nkVMNLdzMv7VRoRjoBQUTu5jjtlMLm87PHc=</custom-trust-key-store-pass-phrase-encrypted>
</server>
When I restart SSL , I see error in log file
Er<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1381506732875>
<BEA-000297> <Inconsistent security configuration, weblogic.management.configuration.ConfigurationException: No identity key/certificate entry was found under alias <SERVER_NAME> in keystore path<name>.jks on server AdminServer>
Please help
I thought before if import certification get status Certificate reply was installed in keystore
it shouldn't be problem for weblogic use thsi certificate;

Compare your steps with the following
http://weblogic-wonders.com/weblogic/2011/05/25/ssl-configuration-for-weblogic-server/

I am getting an error message that "no photos could be found on this device" when I plug in my ipad to my windows 8. I open the dcim folder and it shows up empty, although I clearly have photos on my ipad. I was able to do this just last week. HELP!

Help, I am trying to get my pictures from my ipad to my computer (windows 8) and I get the message that "no photos could be found on this device." When I try to open the dcim folder, it shows up empty. What can I do? I have previously been able to import pictures easily.

Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!

VerifyError: Error #1025: An invalid register 2 was accessed

hi,
i have an this xml file to read
<test xmlns:"
http://something.com">
<n:name xmlnx:n="
http://something.com">hello</n:name>
i put is in an arrayCollection ,data, and when try to execute
this code i have an error
<mx:DataGrid id="test" visible="true"
dataProvider="{data}" xmlns="
http://something.com" >
<mx:columns>
<mx:DataGridColumn dataField="name"
headerText="name"/>
</mx:columns>
</mx:DataGrid>

This turned out to be either
var myFunc:Function=someFunctionFromOurCode;
myFunc.apply(null,args);
//OR
myFunc.call(null);
changing the nulls (thisObj params) to something more appropriate killed the bug.
The reason I was setting the thisObj to null is because none of the functions getting called required a "this" scope

Error -2041 an invalid sample descripton was found in this movie

Similar Messages

Maybe you are looking for