Error #2046: The loaded file did not have a valid signature in flex 4
As part of our CI build, the ant script that builds the client side (flex 4) projects also runs a set of FlexUnit4 tests on the deployed project. Most of the tests work but a few fail with this error
RSL
http://local.foo.com/bar/com/blah/components/someComponent/framework_4.1.0.16076.swz failed to load.
Error #2046: The loaded file did not have a valid signature.
The build machine is running Ununtu 10.10 with Firefox 3.6 and Flashplayer 10.2. If I run the exact same set of tasks, accessed from the same URL in windows everything passes with no problem. After some searching I did run across this thread: http://forums.adobe.com/message/2747415#2747415 but when I went looking for the libflashsupport.so file mentioned, the Ubuntu docs seemed to indicate that it was no longer needed.
I'm at my wits end here. Is libflashsupport.so actually needed in Ubuntu 10.10 and if so where would I find it? If not does anyone know of another issue that could be responsible for this?
hello,
I have the same issue, Ubuntu 10.10, flashplayer 10.3rc1
mxmlc SimplePrj.mxml -debug=true -benchmark=true --target-player=10 -output ../deploy/SimplePrj.swf
mxlc verbose:
Loading configuration file /home/.../flex-config.xml
Initial setup: 79ms
start loading swcs 9ms Running Total: 88ms
Loaded 34 SWCs: 740ms
precompile: 1062ms
Required RSLs:
http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/framework_4.5.0.20967.swz with 1 failover.
http://fpdownload.adobe.com/pub/swz/tlf/2.0.0.232/textLayout_2.0.0.232.swz with 1 failover.
http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/spark_4.5.0.20967.swz with 1 failover.
http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/sparkskins_4.5.0.20967.swz with 1 failover.
http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/mx_4.5.0.20967.swz with 1 failover.
Files: 540 Time: 3380ms
Linking... 27ms
SWF Encoding... 18ms
/.../SimplePrj/deploy/SimplePrj.swf (80059 bytes)
postcompile: 45ms
Total time: 4259ms
Peak memory usage: 81 MB (Heap: 62, Non-Heap: 19)
I had to copy the swz to deploy folder since failovers are not yet available.
* accessing from windows machines it loads swz without complaints.
Jaco
Similar Messages
-
Error #2046: The loaded file did not have a valid signature.
I have three different applications which suddenly stopped working with this error
Error #2046: The loaded file did not have a valid signature.
None of the sites has been touched in Months, I assumed they would keep working the way they had.
I wonder how many other sites are experiencing this and how many PO'd customers there are out there??
This is really bad business practice, what is causing it?
Dan Pride
Note: the three were developed around the same time, one domain went down for a few days and was then renewed????Daniel... have you found a solution to your problem?
I am also having the same problem. I was googling with no avail, when I noticed you added this post just yesterday,
so I am thinking that adobe has done something to the swz files hosted on thier servers.
Can someone from Adobe confirm if anything was done to either swz files or the crossdomain files on their end?
I am in the same boat as you... no changes on our side, but the application has suddenly stopped working.
We were building against a beta build of flex 4 (4.0.0.10485)
I wonder which sdk version you are using?
Here is what I see through the debugger...
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
[SWF] C:\Inetpub\wwwdata\xxxxxxxxx_Application.swf - 847,661 bytes after decompression
Error #2046: The loaded file did not have a valid signature.
Failed to load RSL http://fpdownload.adobe.com/pub/swz/flex/4.0.0.10485/framework_4.0.0.10485.swz
Failing over to RSL framework_4.0.0.10485.swz
Error #2046: The loaded file did not have a valid signature.
PS... I have tried multple PCs (XP, Vista, Server 2008) with different versions of flash player (10.0.45.2, 10.0.22.87)
Any help appreciated. -
Anyone know what is Error #2046: The loaded file did not have a valid signature
can anyone help me solve this issue? when i try to run project or make swf file
Error #2046: The loaded file did not have a valid signature
show up. how do i get a valid signature? or it show up because it is a trial version?
please help me!!Hi Ryan,
Please see this recent post: http://forums.adobe.com/message/3277736#3277736
Your best option is to open your project in the shipping version of Flash Catalyst CS5 and re-publish it. Catalyst CS5 can open projects that were created with the beta 2 release (October 2009) or newer.
If your project won't open, then it was probably created in an earlier beta/alpha version of Catalyst. If you know how to write Flex code, with some work you can upgrade these old projects by hand: import the project into Flash Builder 4 and then resolve any problems you encounter with compiling and running the project.
Sorry for the trouble -- hope this info helps,
- Peter -
I bought six songs using my itunes gift card in February but I cannot play the songs or downlaod them to my ipod because I get an error saying the original file could not be found. I have used the gift card previously with no issue. How do I fix it?
Have you moved or deleted those tracks on your computer (the gift card has got nothing to do with it) ?
You might be able to re-download them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes (re-downloading isn't possible in all countries) - if those songs appear there then delete the entries from your iTunes library (where you are clicking on them to play them and gettinf the 'original file' error), and they should then get a cloud symbol against them for re-downloading.
If they don't appear in that link then have you got them on, for example, an external drive ? -
On windows, while cloning error The destination file does not have write pe
Hi,
I am cloning in windows 2003, 11.5.10.2. After copying files while runnig
adcfgclone.pl dbTier it is hanging at 13% and throwing error "The Destination file does not have write permissions ......\9.2.0\OPatch\perl_modules\Command.pm"
i am not using MKS perl.
i changed directory to $ORACLE_HOME\Apache\perl\5.*\MS*\
perl .....\appsutil\clone\bin\adcfgclone.pl dbTierPlease any pointers will be helpful.
Regards
TaherHi Taher;
Please check:
perl setting windows:
Re: cloning oracle applications 11i on windows
Also check:
Setting the Perl Environment PERL5LIB [ID 395294.1]
Common Perl Setup Issues and Solutions for E-Business Suite 11i [ID 404055.1]
Regard
Helios -
LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be. -
All,
I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
groups for different applications, just as I'm trying here with Office 2013.
Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
and publish all applications within a package to a user regardless of whether they are in the correct group or not?
The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
ThanksNicke,
The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
on the machine when delivered?
<Configuration>
<Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
<Product ID="ProPlusVolume">
<Language ID="en-us" />
<ExcludeApp ID="Access" />
<ExcludeApp ID="InfoPath" />
</Product>
</Add>
</Configuration>
3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
Dan,
Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
From what I’ve read / watched I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
(I think).
The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
Is my understanding above correct or have I missed some options / methods?
If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
this use case is the AppV method one which will be unsuitable?
Thanks -
cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me
Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization -
I get an error message "the following files were not imported because they could not be read (266)..
I get an error message "the following files were not imprted because they could not be read (266) on Lightroom 4 on my desktop.
No problems importing the files onto my laptop. Using a SANDISK card reader and card. What's going on on the desktop?Leanne, check the write pernissions on the folder/drive you are attempting to import into on your desktop. The message usually means "cannot be written" - a not so clear message.
-
i recently purchased used macbook pro 15" but unfortunately i erase the harddisk and did not have back up but when i try to reinstall the mac os x lion it ask me the id password,how i can purchse the mac os x lion.
where from i can buy the mac os x lion because i am using windows base system when i try to buy from apple web side it show in app store only not in itunesHave you tried booting from the Recovery HD to reinstall Lion?
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
You will need the Apple ID and password used to purchase Lion. If you have not purchased Lion, then you will need to purchase the Snow Leopard DVD and install Snow Leopard then update it to 10.6.8 to access the App Store where you can purchase and download Lion under your own Apple ID. Or you can purchase the Apple USB Lion installer flash drive at any local Apple retailer or the Online Store. -
The enrollment server did not provision a valid identity certificate
I'm working on rolling my own MDM service, and I'm trying to combine the SCEP and MDM payloads as the MDM protocol document from Apple suggests. I created my own SCEP web service in C# .Net and I know that the device can get a valid certificate when I just send the SCEP payload. However when I also include an MDM payload that points to the SCEP payload's UUID via the IdentityCertificateUUID key, I get the following error, "The enrollment server did not provision a valid identity certificate." This configuration is the one that is sent after the user chooses to install the initial enrollment configuration (step 1 of phase 2 in this diagram).
The device doesn't appear to even make an attempt at connecting to my server, and thanks to server side logging I know that it never reaches my SCEP web service page. This seems to indicate that there's something wrong with the certificate I use to sign the payload. I've separately tried signing it with my SSL certificate (from a pre trusted root authority), my customer MDM push certificate (chained from our vendor cert), and my self-signed root certificate authority certificate (created via makecert.exe) that the SCEP service uses to issue new certificates (i.e. device identity certificates).
I've looked at the output from the iPCU (iPhone Configuration Utility) when I create a profile with both the MDM and SCEP payloads, and it isn't a valid profile (I've even tried copying it nearly wholesale). However when I install the profile via the iPCU the error doesn't come up and it begins the SCEP enrollment process without issue.
A side note - using a preexisting MDM vendor is not an option here.
Below is the profile I'm using:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>PayloadContent</key>
<array>
<dict>
<key>PayloadContent</key>
<dict>
<key>Challenge</key>
<string>this is a challenge</string>
<key>Key Type</key>
<string>RSA</string>
<key>Key Usage</key>
<integer>5</integer>
<key>Keysize</key>
<integer>1024</integer>
<key>Name</key>
<string>mycompany</string>
<key>Retries</key>
<integer>3</integer>
<key>RetryDelay</key>
<integer>0</integer>
<key>Subject</key>
<array><array><array>
<string>CN</string>
<string>mycompany</string>
</array></array></array>
<key>URL</key>
<string>https://mysite.com/scep.aspx</string>
</dict>
<key>PayloadDescription</key>
<string>Configures SCEP</string>
<key>PayloadDisplayName</key>
<string>SCEP (mycompany)</string>
<key>PayloadIdentifier</key>
<string>com.mycompany.mdm.scep1</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadType</key>
<string>com.apple.security.scep</string>
<key>PayloadUUID</key>
<string>57225d3d-0758-4d23-8093-e4d8c9bbd47c</string>
<key>PayloadVersion</key>
<integer>1</integer>
</dict>
<dict>
<key>AccessRights</key>
<integer>3</integer>
<key>CheckInURL</key>
<string>mysite.com/checkin.aspx</string>
<key>CheckOutWhenRemoved</key>
<false/>
<key>IdentityCertificateUUID</key>
<string>57225d3d-0758-4d23-8093-e4d8c9bbd47c</string>
<key>PayloadDescription</key>
<string>Configures MobileDeviceManagement.</string>
<key>PayloadIdentifier</key>
<string>com.mycompany.mdm.mdm2</string>
<key>PayloadOrganization</key>
<string></string>
<key>PayloadType</key>
<string>com.apple.mdm</string>
<key>PayloadUUID</key>
<string>ed0ae41d-1aa7-4721-9fe9-139c1072132c</string>
<key>PayloadVersion</key>
<integer>1</integer>
<key>ServerURL</key>
<string>https://mysite.com/checkin.aspx</string>
<key>SignMessage</key>
<false/>
<key>Topic</key>
<string>com.apple.mgmt.mypushsubject</string>
<key>UseDevelopmentAPNS</key>
<true/>
</dict>
</array>
<key>PayloadDescription</key>
<string>Profile description.</string>
<key>PayloadDisplayName</key>
<string>Test Profile</string>
<key>PayloadIdentifier</key>
<string>com.mycompany.mdm</string>
<key>PayloadOrganization</key>
<string>mycompany</string>
<key>PayloadRemovalDisallowed</key>
<false/>
<key>PayloadType</key>
<string>Configuration</string>
<key>PayloadUUID</key>
<string>13321058-4037-478c-9b1e-ef6f810065cb</string>
<key>PayloadVersion</key>
<integer>1</integer>
</dict>
</plist>I got in touch with Apple about this.
Apparently you want to send the combined MDM & SCEP payload in step 2 of phase 3 of the diagram I linked in my question, which is the profile that's sent after OTA enrollment. According to Apple you need two separate certificates (which means two SCEP enrollments) - one for OTA enrollment, and one for MDM enrollment. -
ERROR ITMS-4103: "Country WW does not have a valid currency" at Book/Offer (MZItmspOfferPackage)
Dear,
i 've got this error when i tried to upload my book using iTunes Producer and i don't know how to solve it
if any one know the solving please inform me
ERROR ITMS-4103: "Country WW does not have a valid currency" at Book/Offer (MZItmspOfferPackage)Hello ModernGuide
For specific issues with uploading your book and dealing currency, you will want to contact Apple Directly and the article below will have contact information for phone support or support through email.
Authors & Book Publishers: Frequently Asked Questions
http://www.apple.com/itunes/content-providers/book-faq.html
Apple provides support to iBooks Store authors and publishers via email and phone:
Send an email to [email protected]
If you have an Apple ID enabled for iTunes Connect, you can contact the iBooks Publisher Support team by phone, Monday through Friday from 7 a.m. to 5 p.m. (PT). Local phone support is available in English in the countries listed below
Austria, Australia, Denmark, France, Germany, Italy, Netherlands, Norway, Spain, Sweden, U.K., U.S.
Regards,
-Norm G. -
SBL-ODU-01007 - The HTTP request did not contain a valid SOAPAction header
I am trying to insert a Lead using the following XML
SOAPAction: "document/urn:crmondemand/ws/ecbs/lead/10/2004:LeadInsert"
URL: https://secure-ausomxbia.crmondemand.com/Services/Integration
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:ns2="urn:crmondemand/ws/ecbs/lead/10/2004" xmlns:ns3="urn:/crmondemand/xml/Lead/Data">
<env:Header>
<ns1:Security>
<ns1:UsernameToken>
<ns1:Username>****</ns1:Username>
<ns1:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">****</ns1:Password>
</ns1:UsernameToken>
</ns1:Security>
</env:Header>
<env:Body>
<ns2:LeadInsert_Input>
<ns3:ListOfLead lastpage="true" recordcount="1">
<ns3:Lead>
<ns3:ExternalSystemId>3232323</ns3:ExternalSystemId>
<ns3:LeadFirstName>soap</ns3:LeadFirstName>
<ns3:LeadLastName>test</ns3:LeadLastName>
</ns3:Lead>
</ns3:ListOfLead>
<ns2:Echo>off</ns2:Echo>
</ns2:LeadInsert_Input>
</env:Body>
</env:Envelope>
I am getting following response.
<?xml version = '1.0' encoding = 'UTF-8'?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>Client</faultstring>
<detail>
<ErrorCode>SBL-ODU-01007</ErrorCode>
<ErrorMessage>The HTTP request did not contain a valid SOAPAction header. The value of the header was </ErrorMessage>
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>
I have checked the URL and SOAPAction seem to be correct, can somebody please let me know what can be the problem.
Thanks.I am trying to insert a Lead using the following XML
SOAPAction: "document/urn:crmondemand/ws/ecbs/lead/10/2004:LeadInsert"
URL: https://secure-ausomxbia.crmondemand.com/Services/Integration
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:ns2="urn:crmondemand/ws/ecbs/lead/10/2004" xmlns:ns3="urn:/crmondemand/xml/Lead/Data">
<env:Header>
<ns1:Security>
<ns1:UsernameToken>
<ns1:Username>****</ns1:Username>
<ns1:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">****</ns1:Password>
</ns1:UsernameToken>
</ns1:Security>
</env:Header>
<env:Body>
<ns2:LeadInsert_Input>
<ns3:ListOfLead lastpage="true" recordcount="1">
<ns3:Lead>
<ns3:ExternalSystemId>3232323</ns3:ExternalSystemId>
<ns3:LeadFirstName>soap</ns3:LeadFirstName>
<ns3:LeadLastName>test</ns3:LeadLastName>
</ns3:Lead>
</ns3:ListOfLead>
<ns2:Echo>off</ns2:Echo>
</ns2:LeadInsert_Input>
</env:Body>
</env:Envelope>
I am getting following response.
<?xml version = '1.0' encoding = 'UTF-8'?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>Client</faultstring>
<detail>
<ErrorCode>SBL-ODU-01007</ErrorCode>
<ErrorMessage>The HTTP request did not contain a valid SOAPAction header. The value of the header was </ErrorMessage>
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>
I have checked the URL and SOAPAction seem to be correct, can somebody please let me know what can be the problem.
Thanks. -
Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.
(Apologies for butting in, wha.)
now older version is not able to connect to itunes store error 306. I am using windows 7.
If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
iTunes for Windows 9.0.x: Error 306 -
EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANELSTOP SHOUTING! Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download
Maybe you are looking for
-
PO changes not reflecting in the SAP R/3 system in Extended classsic
Hi Guys, I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the
-
Cannot sign into creative cloud from 2nd computer, if try to use activation code error message is "oops, already in use"; cannot use creative cloud to access XI, want to use XI on more than one computer
-
I exported a three page pdf document, but the third page of the word document was blank; why?
-
White death screen- unlocked iphone 3g
I'm on T-mobile and have an unlocked iphone 3g. Something must have happened to it last night because it was working fine, then I picked it up to make a phone call and the white screen of death appeared. i can receive calls, texts, etc, and all of th
-
Mountain lion messages problem
Hi I have just set up my new imac, but I'm having problems with Messages. I've set up my account, but can't seem to connect to people I was in regular contact with in ichat on the old system. My status shows as online in the application menu (Message