Error 205 when attempting to install Photoshop

Is there a Windows 7 64bit installer file available? My desktop is running on that OS and the file that downloads for the free trail is probably programmed for the x86 architecture and doesn't have a way to install onto an OS built on the higher bit architecture. I've tried running the file with WinXP SP3 compatibility enabled and that did not help at all. I 90% certain that it is not a connection TYPE issue like the "troubleshooting" that is available for this error says. I downloaded the file on another computer that is Windows 7 32bit over wifi and the file would have installed but I stopped it. When I attempt to install the Creative Cloud software on my computer, that is Windows 7 64bit, the installer hangs after only loading maybe 2% and then spits out the Error 205 message that says to look online for troubleshooting.

Hi Richard,
After uninstalling all National Instruments software, can you check your registry for any "National Instruments" registry keys?  You will need to manually delete these keys before trying to install LabVIEW 2009 again.
To open registry, go to Start and select Run.  You will then need to type "regedit" in the window and click "OK".
Kind regards,
Marshall B
Applications Engineer
National Instruments UK & Ireland

Similar Messages

  • I'm getting error 205 when trying to install ID with Creative Cloud on Windows 7. Help please.

    I'm getting error 205 when trying to install ID with Creative Cloud on Windows 7. Help please.

    Creative Cloud Help / Error downloading Creative Cloud applications
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

  • Receive "Access Denied" error message when attempting to install iTunes

    Receive "Access Denied" error message when attempting to install iTunes. 

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Error message when attempting to install itunes    0x80070BC9

    Error message when attempting install of itunes   0x80070BC9

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Need assistance with Error 1327 when trying to install Photoshop app - first time Cloud user.

    I am attempting to install Photoshop CS6 app and am receiving Error 1327: Invalid Drive: M:\   Need some assistance.

    Hi Mary,
    The reason why we were mapping is because in the Registery the default location for the installation has been changed automaticaly for some reason . please try following the steps mentioned in the forum : http://forums.adobe.com/thread/913304 and then try to do the installation again .
    Let us know if it worked or not for us .
    Regards,
    KS

  • I keep getting error DF024 when trying to install Photoshop

    Why do I keep getting error DF024 when trying to install the latest photoshop?

    Ckarpell for information on how to resolve the DF024 error please see Error DF024 installing Creative Cloud products | Mac.

  • I am getting a runtime error message when attempting to install iTunes.

    When attempting to install iTunes I keep getting a Runtime Error! message under the Microsoft Visual C++ Runtime Library.  Anyone have this same issue and an idea on how to remedy?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Error message when attempting to download Photoshop CC?

    I have attempted to download Photoshop CC and get an error - Installation completed though some optional components failed to install correctly (6) - RETRY. I have done this several times with no success.  Lightroom downloaded fine. Any thoughts.

    Errors "Exit Code: 6," "Exit Code: 7"
    Mylenium

  • Error 205 when trying to install InDesign

    I constantly get a error 205 message when I try to install InDesign on a Windows 7 pc. I've tried half a dozen times already without success. Does anybody have an idea of what might fix this?
    Thanks a lot

    See if the following posting provides any clues:
    http://forums.adobe.com/message/6261264#6261264

  • Error message when attempting to install lightroom cc on a Mac

    I've downloaded photoshop cc and installed it successfully, having taken out a monthly sub for it and lightroom cc. with lightroom I keep getting the following error message (I'm installing on a macbook pro)
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example,  ERROR: DW006 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

    http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

  • Error showing when attempting to install LabVIEW2009 on my computer (windows XP 32 bit)

    When trying to install LabVIEW2009 on my computer (windows XP 32 bit) I get the following error: The instruction at "0x005466a9" referenced memory at "0x00000000".  The memory could not be "read".  
    Has anyone any ideas why this is error is appearing?  
    Thanks.
    Solved!
    Go to Solution.
    Attachments:
    labview error.JPG ‏138 KB

    Hi Richard,
    After uninstalling all National Instruments software, can you check your registry for any "National Instruments" registry keys?  You will need to manually delete these keys before trying to install LabVIEW 2009 again.
    To open registry, go to Start and select Run.  You will then need to type "regedit" in the window and click "OK".
    Kind regards,
    Marshall B
    Applications Engineer
    National Instruments UK & Ireland

  • Got error message when attempting to install the cameraraw6-2

    Attempted to install the new camera raw patch from the labs.. received the following message 'Error loading Updater workflow' from the Adobe Application Manager - Updates screen.

    Pronil,
    I had previously located kb952249 and it applies to Vista & Windows Server 2008.
    My system that does not work is Windows XP sp3
    And all other recommended & reasonably expected patches are up to date.
    Thanks
    John.

  • Constantly getting error code when trying to install Photoshop CC!

    I have been trying for the past hour to attempt to re-install CC.  My PC had an error and had to go back to the last saved good image, and that was, unfortunately, before CC was installed. (Which was on the 10th)  I have removed, reinstalled, etc. The cloud app multiple times as well as used the cloud cleaner.  Along with that, I have gone into the appdata file on my PC and deleted the database file for the cloud app but still no luck once-so-ever.  I have checked for remnants of the original CC file and can find nothing at all!  The error code I am getting is below:
    Exit Code: 21
    Please see specific errors below for troubleshooting. For example,  ERROR: DW021 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s)
    ERROR: DW021: Payload {18C53590-8A4E-44FF-B13D-74CB92FD6801} Photoshop Adobe Photoshop CC 2014 Support 15.0.0.0 of version: 8.0.0.13 is not supported by this version: 7.0.0.108 of RIBS
    ERROR: DW021: Payload {D7A4F897-B20A-42D0-862D-CB5F6DB7391D} Photoshop Adobe Photoshop CC 2014 Core 15.0.0.0 of version: 8.0.0.13 is not supported by this version: 7.0.0.108 of RIBS
    ERROR: DW021: Unsupported payload versions included
    I would greatly appreciate any help you can give me at this point, as I've gotten rather frustrated with the process as you can imagine!
    Thank you for your time!

    I've had an open ticket since Saturday night, unfortunately, I have had no luck in a response yet!  I'm still holding out hope.  I haven't owned any other copy of photoshop but CS2 a long time ago!  Got out of it but coming back because I miss the creative freedom it allowed with website, content, personal documentation, photo, and artwork design!  So I'm sorely disappointed at the issue right now, I seriously want to subscribe to the PS bundle, but it's just not going to happen if I can't even get it to install!  Plus all this talk about fun stuff to do and re-learn in Photoshop is getting me even more impatient! Vicious circle, I tell ya!

  • Error 7 when attempting to install Itunes on PC

    After installing Itunes on my PC I got a message that itunes was installed correctly, however, when I click on the Itunes icon I get a message stating that Itunes was not installed correctly Please reinstall Itunes.  Error 7 (Windows 193).  Itunes worked fine until about 3 months ago.  I now have no memory left on my Ipad and need to delete over 5000 pictures, but i cannot sync with Itunes.

    Hey ievafromsa,
    Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • Error TF255050 when attempting to install reporting services in TFS 2013 in-place upgrade.

    Hi,
    Last week we performed an in-place upgrade of our TFS 2012 server to TFS 2013.   During the upgrade process all went well until we hit reporting.   After placing the reporting server's name in the input and click populate URLs we get the TF255050
    error.  We are running a dual tier setup, the reporting server is on a different server than tfs.  (Though the tfs database and the reporting database share the server).
    Myself and my partner did a lot of digging on here and have tried most everything we could find to no avail.  
    -We have ensured myself(installer) and the tfs service account are local admins on both machines
    -Sql client connectivity tools are installed
    -WMI seems configured correctly when compared to other resolutions to this issue others have posted
    note: this site
    ProBlog on artiso.com was mentioned in several posts as part of a resolution but is a broken link.
    -I can connect to the reporting services manager from the tfs server without a problem, as both myself and the tfs service.
    -I've followed suggestions mentioned in this post (ERROR (TF255050)
    while configuring Reporting Services)
    -I've also looked into windows logs on both machines and really seen nothing useful.  We do know that we can successfully talk to sql server though, as the TFS 2013 install already did so.
    I could really use some direction/help on the issue.  
    Thanks

    Hi Kyleco,  
    Thanks for your post.
    Your TFS 2013’s SQL Server instance and the Reporting Server installed on the same machine?
    On your TFS 2013 Server machine, open the SQL Server Management Studio and try connect to your Reporting Server, ensure can connect successfully.
    You didn’t configure the Reporting Server for your TFS 2012 Server? If yes, we suggest you in-place upgrade to TFS 2013 Server first, then manually configure the Reporting Server for your TFS 2013 Server:
    http://nakedalm.com/integrate-reporting-and-analyses-services-with-team-foundation-server-2013/.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • The Mozilla Firefox Support Forum software does not allow me to log-in. Why?

    When I try to log-in to this web site with my longstanding credentials, no error message is displayed and the page "shakes" briefly like a car hitting a rut on a dirt road, and it appears that I am not, in fact, logged-in. What is more basic and elem

  • Problem when printing Thai Characters in Smartform

    Hi All, When printing thai characters in smartform it takes more spaces between characters than required. I tried all possible font to adjust the character spacing. Can anyone help me out. Thanks, Khushboo Dand

  • Installing windows on a macbook air with no superdrive

    I have a macbook air, install discs for windows vista and windows 7 (upgrade only), and no superdrive.  I can't run bootcamp since I don't have the superdrive, and I've tried putting ISO's / IMG's on a hard drive (bootcamp work around) but nothing ha

  • Selection field

    Hi I am having date field in my internal table(yyyymmdd). But in selection field is only GJAHR(year). How to compare that in select statement. Regards John

  • Echo suppresion + video quality (webcam streaming)

    Does Adobe have plans in the near future to improve audio and  video quality when streaming with mic and webcam? It would be good to work on it to compete with other kind of plugins that are being developed, like Google Cam Adapter. Thanks