Error : -2145124329 Installing Microsoft Azure Recovery Services Agent on SBS Standard 2011

When installing the Microsoft Azure Recovery Services Agent on Windows SBS 2011 Standard I receive error code - Error : -2145124329. When looking at the file OBManagedlog.LOGCurr.errlog located here: C:\Windows\Temp extract below it appears to be failing on
the Windows Powershell 3.0 prerequisite which is apart of the .NET 3 Framework. I have tried to install this manually but it does not appear to be compatible with SBS 2011 standard. Anyone have any ideas? MS Azure cannot help until we have a paid subscription,
I have only a trial at the moment as I wanted to test the product first but have been unable to do so as i can't install the agent.

Hi,
I searched and it seems that Windows SBS 2011 is not in the support list. Only Windows Server 2012 Essentials (and later versions) are available.
Windows Server Essentials Integration Module for Windows Azure Backup is Now Available
http://blogs.technet.com/b/sbs/archive/2013/04/19/windows-server-essentials-integration-module-for-windows-azure-backup-is-now-available.aspx
Edit on May.2: I've heard that it was supported in trial version so I'm now trying to contact related team about whether or not it is supported. Will update when getting any response.

Similar Messages

  • MS Azure Recovery Services Agent was unable to create a snapshot - 0x186C2

    Hello in the Azure Backup forum,
    We use Microsoft Azure Backup on a VM in Azure. We have scheduled a backup for everyday. However, so far it has not been able to backup anything it fails with:
    "Microsoft Azure Recovery Services Agent was unable to create a snapshot of the selected volume. Please try the operation again. If the issue persists, contact Microsoft Support. (0x186C2) "
    and in the Windows event log it is found that:
    Event ID 20 - volsnap:
    " a volume snapshot of C:\ was interrupted - free space could not be calculated " - this has been translated from Danish.
    Furthermore when I try doing a manual backup via volume shadow copy services I get the following error:
    When troubleshooting and researching I find hotfixes for this type of error for Windows 2003 Server but none for Windows 2012 R2 or specifically for Microsoft Azure Backup.
    Any suggestions and help will be highly appreciated :-)
    Looking forward to hear from you.
    Red Baron

    Hi,
    Please change the Shadow Copy Storage limit for the System drive to NO LIMIT and check. You may refer:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/e8cac987-e3b9-4ac1-9247-a72e1f953036/was-unable-to-create-a-snapshot-of-the-selected-volume-0x186c2?forum=windowsbackup
    Also, I see that in that error message it states about Free space could not be calculated. Please make sure that you have enough free space (atleast equivalent to that size of snapshot).
    Regards,
    Manu

  • Azure recovery Services (Backup Vault)

    Hi
    I'm trying to test Azure Recovery Services and have established a Backup Vault and connected a new server to it using the Azure generated certificate. The set-up seemed to be very simple and the installation of the agent went like a dream.
    Unfortunately it does not work as after I start a backup I get the error "Engine encountered an unexpected error. Please ....." The corresponding event log entry is:
    Faulting application name: cbengine.exe, version: 2.0.8694.0, time stamp: 0x54816461
    Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
    Exception code: 0xe0434352
    Fault offset: 0x0000000000008b9c
    Faulting process id: 0x12fc
    Faulting application start time: 0x01d03016883f6a46
    Faulting application path: C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cbengine.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: 72d16f21-9c0a-11e4-80e6-00155d800f3f
    Faulting package full name:
    Faulting package-relative application ID:
    The server is a Windows 2012 R2 Domain controller and is patched with all latest Windows Updates. The latest Azure agent was installed from the web site
    I have tried it on a second server built at the same time and it fails there with the same error

    Please find the note on the supported drives by Azure Backup.
    https://msdn.microsoft.com/en-us/library/azure/jj573031.aspx?f=255&MSPPError=-2147217396#BKMK_faq_4

  • Azure Recovery Service

    Hello,
    We are using the Azure Recovery Service to backup data from our server (Windows Server 2012).
    This has been done since almost 1 year now.
    Since last October we experience problems in backuping data, jobs keep failing without any additional details.
    I have totally reinstalled the Azure Agent on the server yesterday to see if it would change, but we still have issues.
    It is quite hard to identify the issue and I would need help i that. Moreover, the backups are still billed as if data was consumed but our last recovery points is from 09.10.2014!
    Thank you in advance for your help and support.

    Hello and thank you for your answer.
    Looking at the log I could extract the part where the backup fails.
    3EE4 477C 01/07 12:42:28.813 75 OMUtils.cs(59)  246C08FC-FE67-4664-890F-D3C7FBF03D44 NORMAL GetFQDNForServer = sdw-srvbu.
    3EE4 341C 01/07 12:42:29.469 32 metadatastream.cpp(537) [000000001C2AC8B0] 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL CMetadataStream::WaitForCompletion Waiting for MetadataStream [4].
    3EE4 341C 01/07 12:42:29.797 32 metadatastream.cpp(562) [000000001C2AC8B0] 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL CMetadataStream::WaitForCompletion Wait complete for MetadataStream [4]. Bytes read = [11574181888]
    3EE4 341C 01/07 12:42:30.770 32 metadatastream.cpp(537) [000000001C2AC8B0] 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL CMetadataStream::WaitForCompletion Waiting for MetadataStream [4].
    3EE4 341C 01/07 12:42:31.212 32 metadatastream.cpp(562) [000000001C2AC8B0] 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL CMetadataStream::WaitForCompletion Wait complete for MetadataStream [4]. Bytes read = [11575230464]
    3EE4 192C 01/07 12:42:31.837 75 OMUtils.cs(59)  FBAF663B-ABA3-48FB-BAFA-E3FA9EB4E55F NORMAL GetFQDNForServer = sdw-srvbu.
    3EE4 341C 01/07 12:42:32.087 32 metadatastream.cpp(537) [000000001C2AC8B0] 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL CMetadataStream::WaitForCompletion Waiting for MetadataStream [4].
    3EE4 42B0 01/07 12:42:32.540 32 msfstream.cpp(133) [000000001C2AC8B0] 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL CMSFStream Download of Metadata stream [4] complete! Bytes downloaded = [11577056256].
    3EE4 341C 01/07 12:42:32.540 32 metadatastream.cpp(562) [000000001C2AC8B0] 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL CMetadataStream::WaitForCompletion Wait complete for MetadataStream [4]. Bytes read = [11576143360]
    3EE4 341C 01/07 12:42:33.353 32 msfparser.cpp(114) [000000001C3DE5A0] 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL Copying real boot sector3EE4 341C 01/07 12:42:33.399 32 metadatastream.cpp(618) [000000001C2AC8B0] 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL CMetadataStream::Close Closing metadata stream [4]
    3EE4 341C 01/07 12:42:33.399 32 metadatastream.cpp(629) [000000001C2AC8B0] 65853539-E59E-4732-AFD0-C5D1F0393B3A WARNING Failed: Hr: = [0x80070003] Failed to delete metadata file []
    3EE4 341C 01/07 12:42:33.399 32 vhdhelper.cpp(15) 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL pVhdHelper:[1a2ab3900x, Type:[1]]
    3EE4 3140 01/07 12:42:34.853 75 OMUtils.cs(59) EA4AB5E8-FAD7-4306-A38A-09260439943A NORMAL GetFQDNForServer = sdw-srvbu.
    3EE4 3140 01/07 12:42:37.874 75 OMUtils.cs(59) 1953CED7-9413-47F0-BB81-59BEB03022D4 NORMAL GetFQDNForServer = sdw-srvbu.
    3EE4 341C 01/07 12:42:37.936 71 replica.cpp(126) 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL ErrorMapper: Set Dls error [DLS - 32505]
    3EE4 341C 01/07 12:42:37.936 71 dscontext.cpp(152) [000000001A2FCEF0] 65853539-E59E-4732-AFD0-C5D1F0393B3A WARNING Last completed state for Ds Id (1801510221167250988) is 4
    3EE4 341C 01/07 12:42:37.936 71 dscontext.cpp(158) [000000001A2FCEF0] 65853539-E59E-4732-AFD0-C5D1F0393B3A WARNING Ds Id (1801510221167250988) failed. DLS: 32505 HRESULT: 0x80070005
    3EE4 341C 01/07 12:42:37.936 71 storageasyncworker.cpp(227) [000000001A42C078] 65853539-E59E-4732-AFD0-C5D1F0393B3A WARNING Failed: Hr: = [0x80070005] Initialize unsuccessful for replica id ({DED9EF60-259A-49EE-9422-81782CE7427B})
    3EE4 341C 01/07 12:42:37.936 71 backupasync.cpp(1016) [000000001A42C070] 65853539-E59E-4732-AFD0-C5D1F0393B3A NORMAL Backup Progress: Initialize Storage finished.
    3EE4 341C 01/07 12:42:37.936 71 backupasync.cpp(1045) [000000001A42C070] 65853539-E59E-4732-AFD0-C5D1F0393B3A WARNING Failed: Hr: = [0x80070005] Backup Progress: Failed
    Tell me if it helps, otherwise I will attach the whole log file
    Thank you

  • Getting an Error while installing Microsoft Visual Studio 2013

    Hi team
    I am getting an error while installing Microsoft Visual Studio 2013
    PFB error : this version of visual studio requires a computer with a never version of windows
    P.S. I am having Windows  7 64 bit processor , van you please advise  ASAP

    Hi Kanchan Gandhi,
    A similar issue is addressed here, hope it’s helpful.
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/127869c4-7e00-450d-b7fc-1b3cd11ebf07/this-version-of-visual-studio-requires-a-computer-with-a-newer-version-of-windows?forum=vssetup
    This is system requirement of Visual Studio 2013:
    http://www.visualstudio.com/products/visual-studio-2013-compatibility-vs
    If there is anything I can do for you regarding this issue, feel free to post back.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Error while installing the BAM Updater Service in Windows

    Hi all,
    I am getting an error while installing the BAM updater service in Windows. When i type the "oraclebpmdatawarehouse install " command in the command prompt it gives error as follows:
    d:\OraBPMEnterpriseHome\bin>oraclebpmwarehouse install
    Installing...
    wrapper | OpenSCManager failed - Access is denied. (0x5)
    Please can anyone tell me how to get rid of this error.
    I have already done everything else like setting the database and other things.
    Thanks.

    From the error message you specified, I guess you are trying to install MS Office SP2 package. If you are then its not MS Office package its just a Service Pack; something like a patch. You need to install a Full Base package first. Again, as mentioned by Rajiv - refer to MS Support

  • Error 1603 installing microsoft sql native client

    error 1603 installing microsoft sql native client
    Sagar Chavan

    have a look at this link
    http://support.microsoft.com/kb/834484
    Satheesh
    My Blog |
    How to ask questions in technical forum

  • Microsoft Azure Monitoring Services Management Library stable release date

    With the general availability of autoscale and the Microsoft Azure Management Libraries, what's the timeline on the general availability of Microsoft Azure Monitoring Services Management Library? Is there an estimated release date for v1.0?

    We have the preview release for the API/REST and a Nuget package
    REST/API
    http://msdn.microsoft.com/en-us/library/azure/dn510374.aspx
    Nuget
    http://www.nuget.org/packages/Microsoft.WindowsAzure.Management.Monitoring/0.10.0-preview
    Johnny Coleman [MSFT] Any code posted to this Forum is [As-Is] With No Warranties

  • Getting error when installing CR XI R2 Service Pack 5

    I am getting an error when installing CR XI R2 SP5 (cabinet file m148.cab missing or corrupt). I am downloading it from the Downloads section of the SAP Community Network.
    Does anyone know where I can get another copy of this service pack?

    Hi
    If you are using Windows 2000 SP4 then install the "Update Rollup 1 for Windows 2000 SP4 (KB891861)" should resolve the error message for missing cabinet file when installing SP4 on Windows 2000, as stated in Release Notes of SP4.
    Below is the link to download the Update Rollup 1 for Windows 2000 SP4 (KB891861):
    http://www.microsoft.com/downloads/details.aspx?FamilyID=B54730CF-8850-4531-B52B-BF28B324C662&displaylang=en  and http://support.microsoft.com/?kbid=891861
    Then install SP5 for Crystal Report XI R2.
    Hope this helps!!
    Regards
    Sourashree

  • Error while installing Microsoft Identity Extensions Setup during installation of SharePoint Foundation 2013 on Windows Server 2012

    Hi All,
     When i try to manually (no internet connection on the server) install SharePoint 2013 Prerequisites on Windows Server 2012 I get the below error
    I have installed .Net Framework 3.5, 4.0 and Windows Identity Foundation using Add server roles or features from the server manager.
    From Software & Hardware requirements for SharePoint 2013 give
    Prerequisites for SharePoint 2013 I can see that the identity extensions are available only of Windows Server 2008 R2 and not for windows server 2012. Can you please provide the link for windows server 2012? 
    I have installed all the prerequisites required except Microsoft Identity Extensions.
    Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
    Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
    Disclaimer: This posting is provided "AS IS" with no warranties.

    I fixed it by installing Microsoft Identity extensions from command line, please find command line below.
    C:\Windows\System32>msiexec.exe /i "C:\SharePoint2013ServerFiles\prerequisiteinstallerfiles\MicrosoftIdentityExtensions-64.msi" /quiet /norestart
    Note: In the above command C:\SharePoint2013ServerFiles\prerequisiteinsTallerfiles is the path where I had downloaded all the prerequisites for SP2013
    This will install Microsoft Identity Extensions and creates registry entries, which will help the SharePoint 2013 Prerequisite installer to complete the setup
    For more details check out
    here
    Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
    Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
    Disclaimer: This posting is provided "AS IS" with no warranties.

  • Error when installing Rescue and Recovery

    Hello, 
    I own a 2 year old Thinkpad L430 running Win7 Pro 64bit.
    I've been trying to install Rescue and Recovery because I want to reset my PC from the recovery partition, and as far as I understand the only way to do that is through RnR(?)
    But whenever I go through the installer i get this error message:
    click me
    which, in english, basically says that there was and error with the return code 6.
    After googling around for a while i found out that the fact that I once had a Linux Distrinution installed alongside Windows may be the cause of aforementioned error, because Linux replaces the default Lenovo boot loader with it's own GRUB one. When i removed the Linux distribution I typed the following into the command line: bootrec.exe /fixmbr to return to the Windows boot loader.
    Do anyone know if the Linux thing is in fact the cause of  the error?
    Can I somehow restore the Lenovo boot loader or is there's some other way to install RnR and/or restore my PC?
    Any help is truly appreciated!
    thanks, 
    Simon

    A typical factory ship of machine from Lenovo: (yours may not look like this).
    Q (lenovo recovery)
    contains Rescue and recovery standalone software.  This standalone software also  can call The factory recovery software, if the Factory software is still on the Q drive.   Lenovo modifies the BIOS to support launch of standalone RNR.
    Regardless of RNR installed or not, on the windows platform, standalone SHOULD launch. There is always a standalone RNR  in the recovery partition. 
    ==
    workaround:
    (1) order REcovery DVD from the support center. $50 us if not under warranty
    (2) find a bud with a Lenovo machine. Create Rescue media to a DVD.  Boot your machine with the DVD. If it finds the recovery partition intact, you can do a Factory reinstall. Rescue media is a standalone RNR, it will not rely on the boot structure on your C drive HDD>
    (3) Your main issue is RNR install died with RC=6. This shows up. Check the msi logs in
    C/users/YOURID/appdata/local/temp. I have researched some of these.  It is confusion in the installer/ and the condition of the PDA/predesktop area (corrupted) . PDA is standalone rnr. Your PDA is probably just fine.
    SO, which version of RNR did you try to install? Was it the USA english version or the NLS support version.
    Your cant mix and match.
    You cant switch from the English only version to NLS. denmark version, it will rc=6. I personally think this is a bug..
    Region lang, local lang etc also confuse RNR installer.
    The rc=6 occurs way after the installer had a bug in it. Yes it is trying to modify the MBR/BCD. I dont think your linux stuff mucked it up.  
    ==
    Simple solution:
    Get a DVD of standalone RNR to perform the factory recovery. 
    -or- hit pff11 at boot time, and use RNR standalone for Factory recover<<< this shoud work. << my choice.

  • Can't install Microsoft Exchange Web Services Managed API 2.0 - message says it is already installed but it is not.

    I tried to install the Microsoft Exchange Web Services Managed API 2.0 but I got a message saying it was already installed and that I should un-install it.  However it does not appear in the control panel un-install a program list.  I am using
    VS2013 on windows 8.  What can I do to get it to work?
    Mike VE

    Hello,
    Thank you for your sharing.
    If you have any feedback on our support, please click
    here
    Cara Chen
    TechNet Community Support

  • Error while installing Oracle Cluster Ready Services – Release 1 (10.1.0.2)

    Hi all,
    I am trying for RAC – 10gR1 (10.1.0.2) using two machines with Windows 2000 Server. For this I need to install Oracle Cluster Ready Services – Release 1 (10.1.0.2).
    Machine details are as follows:-
    Node 1:
    Computer Name:     RAC1
    Windows 2000 IP Configuration
    Ethernet adapter Local Area Connection 2: (Used for Public Interface)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 192.168.1.65
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 10.10.10.11
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Node 2:
         Computer Name:     RAC2
    Windows 2000 IP Configuration
    Ethernet adapter Local Area Connection 2: (Used for Public Interface)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 192.168.1.181
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 10.10.10.12
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    I have made following entries in Hosts file of both the machines:-
    192.168.1.65     RAC1
    192.168.1.181     RAC2
    10.10.10.11     RAC01-PRIV
    10.10.10.12     RAC02-PRIV
    192.168.1.201     RAC01-VIP
    192.168.1.202     RAC02-VIP
    I have completed all the pre-installation steps, i.e. configuring the disk for storage, and both the machine are communicating each other through there Private and Public interfaces. Now the problem appears when I am installing Oracle Cluster Ready Services, at the end of Installation following message appears and the auto configuration steps fails.
    ================================================================================================================
    Output generated from configuration assistant "Oracle Cluster Ready Services Configuration Assistant":
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 1: rac1 rac01-priv rac1
    node 2: rac2 rac02-priv rac2
    Creating OCR keys for user 'administrator', privgrp ''..
    Operation successful.
    Now formatting voting device: \\.\votedsk
    Successful in setting block0 for voting disk.
    Format complete.
    Step 1: checking status of CRS cluster
    Step 2: configuring OCR repository
    Step 3: configuring safe mode for CRS stack
    Step 4: Starting up CRS stack on all nodes
    RAC1 service OracleCSService in improper PENDING state, err(997)
    RAC2 service OracleCSService in improper PENDING state, err(997)
    Configuration assistant "Oracle Cluster Ready Services Configuration Assistant" failed
    ================================================================================================================
    Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
    Configuration assistant "Oracle Notification Server Configuration Assistant" failed
    ================================================================================================================
    Output generated from configuration assistant "Oracle Private Interconnect Configuration Assistant":
    PRIF-10: failed to initialize the cluster registry
    Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
    ===============================================================
    I would be highly obliged if any one tell me why it is happing like this and what could be the possible remedy.
    Waiting for the respone.
    With Regards
    Dinesh
    [email protected]

    Hi user478171,
    I have the same problem with two nodes in Windows 2003 with RAC 10g R2, but I don't have idea to solve.
    Please advice me
    Thanks advances
    regards,
    IvanR

  • Error when installing 10.2.0.3 agent on solaris 8

    I've installed the agent successfully on other solaris 8 servers but on this one machine, i get the "Heap at VM Abort" error.
    I've seen this in the past when doing oracle installations and the trick was to use a different size for jre_memory_options.
    However, i've modified the oraparam.ini file but it hasn't failed.
    I've seen many hits on google but don't see a fix that works.
    Any ideas?
    Thanks.

    here are more details on the error:
    Heap at VM Abort:
    Heap
    def new generation total 2112K, used 1270K [0xea800000, 0xeaa20000, 0xeb8e0000)
    eden space 2048K, 58% used [0xea800000, 0xea92db00, 0xeaa00000)
    from space 64K, 100% used [0xeaa00000, 0xeaa10000, 0xeaa10000)
    to space 64K, 0% used [0xeaa10000, 0xeaa10000, 0xeaa20000)
    tenured generation total 1408K, used 1179K [0xeb8e0000, 0xeba40000, 0xf4000000)
    the space 1408K, 83% used [0xeb8e0000, 0xeba06cc8, 0xeba06e00, 0xeba40000)
    compacting perm gen total 5632K, used 5389K [0xf4000000, 0xf4580000, 0xf8000000)
    the space 5632K, 95% used [0xf4000000, 0xf4543738, 0xf4543800, 0xf4580000)
    Local Time = Wed Jan 30 10:58:42 2008
    Elapsed Time = 3
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_04-b05 mixed mode)
    # An error report file has been saved as hs_err_pid28700.log.
    # Please refer to the file for further information.
    I can't seem to find that log file above anywhere. Where would that be?

  • Error when installing Microsoft Office Remote PC

    Dear Microsoft Team,
    I am trying to install the Microsoft Office Remote PC on Win 7 Virtual machine (component installed on Dot Net 4.5 and Office 2013 on the machine). However getting the 'Error 0x800b010a : A certificate chain could not be built to a trusted root authority'.
    Kindly advice how we can over come this issue.
    Thanks Much appreciated.
    Logs:
    [01D4:0AE4][2015-03-04T06:55:54]i200: Plan begin, 2 packages, action: Install
    [01D4:0AE4][2015-03-04T06:55:54]w321: Skipping dependency registration on package with no dependency providers: NetFx45Web
    [01D4:0AE4][2015-03-04T06:55:54]i000: Setting string variable 'WixBundleRollbackLog_OfficeRemotePackage' to value 'C:\Users\ADMINI~1\AppData\Local\Temp\Microsoft_Office_Remote_20150304065552_0_OfficeRemotePackage_rollback.log'
    [01D4:0AE4][2015-03-04T06:55:54]i000: Setting string variable 'WixBundleLog_OfficeRemotePackage' to value 'C:\Users\ADMINI~1\AppData\Local\Temp\Microsoft_Office_Remote_20150304065552_0_OfficeRemotePackage.log'
    [01D4:0AE4][2015-03-04T06:55:54]i201: Planned package: NetFx45Web, state: Present, default requested: Present, ba requested: Present, execute: None, rollback: None, cache: No, uncache: No, dependency: None
    [01D4:0AE4][2015-03-04T06:55:54]i201: Planned package: OfficeRemotePackage, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: Yes, uncache: No, dependency: Register
    [01D4:0AE4][2015-03-04T06:55:54]i299: Plan complete, result: 0x0
    [01D4:0AE4][2015-03-04T06:55:54]i300: Apply begin
    [0AB8:09BC][2015-03-04T06:55:54]i360: Creating a system restore point.
    [0AB8:09BC][2015-03-04T06:55:54]w363: Could not create system restore point, error: 0x80070422. Continuing...
    [0AB8:09BC][2015-03-04T06:55:54]i000: Caching bundle from: 'C:\Users\ADMINI~1\AppData\Local\Temp\{7a1ad515-9199-47d6-aa40-6fdf2c857ff0}\.be\OfficeRemoteSetup.exe' to: 'C:\ProgramData\Package Cache\{7a1ad515-9199-47d6-aa40-6fdf2c857ff0}\OfficeRemoteSetup.exe'
    [0AB8:09BC][2015-03-04T06:55:54]i320: Registering bundle dependency provider: {7a1ad515-9199-47d6-aa40-6fdf2c857ff0}, version: 1.1.3.0
    [0AB8:07B4][2015-03-04T06:56:39]e000: Error 0x800b010a: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\OfficeRemotePackage
    [0AB8:07B4][2015-03-04T06:56:39]e000: Error 0x800b010a: Failed to verify signature of payload: OfficeRemotePackage
    [0AB8:07B4][2015-03-04T06:56:39]e310: Failed to verify payload: OfficeRemotePackage at path: C:\ProgramData\Package Cache\.unverified\OfficeRemotePackage, error: 0x800b010a. Deleting file.
    [0AB8:07B4][2015-03-04T06:56:39]e000: Error 0x800b010a: Failed to cache payload: OfficeRemotePackage
    [01D4:0A94][2015-03-04T06:56:39]e314: Failed to cache payload: OfficeRemotePackage from working path: C:\Users\ADMINI~1\AppData\Local\Temp\{7a1ad515-9199-47d6-aa40-6fdf2c857ff0}\OfficeRemotePackage, error: 0x800b010a.
    [01D4:0A94][2015-03-04T06:56:39]e349: Application requested retry of payload: OfficeRemotePackage, encountered error: 0x800b010a. Retrying...
    [0AB8:07B4][2015-03-04T06:57:24]e000: Error 0x800b010a: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\OfficeRemotePackage
    [0AB8:07B4][2015-03-04T06:57:24]e000: Error 0x800b010a: Failed to verify signature of payload: OfficeRemotePackage
    [0AB8:07B4][2015-03-04T06:57:24]e310: Failed to verify payload: OfficeRemotePackage at path: C:\ProgramData\Package Cache\.unverified\OfficeRemotePackage, error: 0x800b010a. Deleting file.
    [0AB8:07B4][2015-03-04T06:57:24]e000: Error 0x800b010a: Failed to cache payload: OfficeRemotePackage
    [01D4:0A94][2015-03-04T06:57:24]e314: Failed to cache payload: OfficeRemotePackage from working path: C:\Users\ADMINI~1\AppData\Local\Temp\{7a1ad515-9199-47d6-aa40-6fdf2c857ff0}\OfficeRemotePackage, error: 0x800b010a.
    [01D4:0A94][2015-03-04T06:57:24]e349: Application requested retry of payload: OfficeRemotePackage, encountered error: 0x800b010a. Retrying...
    [0AB8:07B4][2015-03-04T06:58:09]e000: Error 0x800b010a: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\OfficeRemotePackage
    [0AB8:07B4][2015-03-04T06:58:09]e000: Error 0x800b010a: Failed to verify signature of payload: OfficeRemotePackage
    [0AB8:07B4][2015-03-04T06:58:09]e310: Failed to verify payload: OfficeRemotePackage at path: C:\ProgramData\Package Cache\.unverified\OfficeRemotePackage, error: 0x800b010a. Deleting file.
    [0AB8:07B4][2015-03-04T06:58:09]e000: Error 0x800b010a: Failed to cache payload: OfficeRemotePackage
    [01D4:0A94][2015-03-04T06:58:09]e314: Failed to cache payload: OfficeRemotePackage from working path: C:\Users\ADMINI~1\AppData\Local\Temp\{7a1ad515-9199-47d6-aa40-6fdf2c857ff0}\OfficeRemotePackage, error: 0x800b010a.
    [01D4:0AE4][2015-03-04T06:58:09]e000: Error 0x800b010a: Cache thread exited unexpectedly.
    [0AB8:09BC][2015-03-04T06:58:09]i330: Removed bundle dependency provider: {7a1ad515-9199-47d6-aa40-6fdf2c857ff0}
    [0AB8:09BC][2015-03-04T06:58:09]i352: Removing cached bundle: {7a1ad515-9199-47d6-aa40-6fdf2c857ff0}, from path: C:\ProgramData\Package Cache\{7a1ad515-9199-47d6-aa40-6fdf2c857ff0}\
    [01D4:0AE4][2015-03-04T06:58:10]i399: Apply complete, result: 0x800b010a, restart: None, ba requested restart:  No

    Hi,
    Microsoft Office Remote PC is a pretty cool tool, just found this introduction article which includes a Support Forum link for this product in it:
    http://answers.microsoft.com/en-us/office/forum/office_mobile
    I think you probably need to post in this dedicated forum for better support.
    As far as I know, they only provide IT Pro level support for Office client here in current forum.
    Aravindhan Battepati

Maybe you are looking for