Error -2147023174 with DI Server

Recently I restarted DI Server service on the customer's server after loading a new license file. After restart, DI Server returns fault number -2147023174 for all requests. There are no hints for the cause of the problem in the Windows event viewer.
We have tried restarting the DI Server as well as restarting the whole server. We have also tried reloading the previous as well as the current license key. We even removed and reinstalled server tools altogether. No help, the error message persists.
Before the restart, the DI Server had been running for a week without problems. I suppose there might have happened some change on the server during those days and the problem might only have activated after the restart.
Has anyone seen this error message before? I already filed a message at the service marketplace, but nowadays it seems I have no hope of getting a response from them in less than a week, even when the message status is "high".
Henry

Hi Ibai,
Thanks for the tip. Actually the problem was not DCOM settings, as those were the first thing I modified after reinstalling the server tools. The problem was mysteriously fixed when I omitted the license server element from the login message.
For a while I was wondering what could possibly cause this phenomenon. The thread you are pointing to has the explanation: in our case there was another DI Server application that was using a different (but valid) IP address for license server in their DI Server calls. This caused a conflict with the value in SLIC table.
I suppose when I omit the license server address from the login message, DI Server is using the value found in SLIC table.
Henry

Similar Messages

There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.

I've had several users complain of receiving this message after they have filled out and submitted a form.
There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.
However the data is being saved in forms central. I can't duplicate the issue on my end but it seem to be happing frequently with other users.

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

Error Communicating with DCR Server

Hello,
While trying to edit device credentials, I got this error from DCR:
Error in communicating with DCR Server.
DCR Server may be down. Please start the DCR Server and then refresh the page.
But when I checked the DCRServer process status from Process Status Report and the Process List, it's Running normally.
What could be the problem? The CiscoWorks server runs 3.0.1 (December 2007 Update). Attached are pdshow command output, dcr and DCRServer logs

Hi Joel,
I have the same problem with LMS 3.1,
Products Installed
Re: Error Communicating with DCR Server
Name
Version
License Status
Size
CiscoWorks Common Services
3.2.0
Licensed
Not applicable
Campus Manager
5.1.4
Evaluation
100
CiscoView
6.1.8
Licensed
Not applicable
CiscoWorks Assistant
1.1.0
Licensed
Not applicable
Device Fault Manager
3.1.3
Evaluation
100
Internetwork Performance Monitor
4.1.0
Evaluation
100
Integration Utility
1.8.0
Licensed
Not applicable
LMS Portal
1.1.0
Licensed
Not applicable
Resource Manager Essentials
4.2.0
Evaluation
100
Health and Utilization Monitor
1.1.0
Evaluation
100
When I try to edit Device Credential, this error appears.
Error in communicating with DCR Server.
DCR Server may be down. Please start the DCR Server and then refresh the page.
DCRServer is stopped and started but the problem still appears.
Thanks.

An error has occurred. There was an error communicating with the server. Please try again later.

I have a simple form which allows users to submit receipts as attachments. I have some required identifying information (name, etc.) and then three optional slots for attachments, along with optional text boxes for descriptions. The form tests fine with attachments on my computer and on a couple other computers we tested with.
However, I am getting complaints from several users that they see the following message when they hit "Submit": "An error has occurred. There was an error communicating with the server. Please try again later." Any ideas why this might be or how I can fix it?

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

Error communicating with AdobeID server - DAY 3

So, I'm trying to activate the Digital Editions of Adobe on my MacBook, but I keep getting this darned message:Error communicating with AdobeID server. Please try again later.
What in the world is happening? I've been trying to get this to work for nearly 3 days. My classes will begin soon, and I'm REQUIRED to have this Adobe Digital Editions in order to download my books. WTH?! Can someone please help me get around this problem please?
Thank,
Monique

I'm getting the same problem. I'm in the UK
My error message is: E_AUTH_DATABASE_CONSISTENCY http://adeactivate.adobe.com/adept/SignInDirect AdobeID
(I have removed my ID)

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

This usually caused by a customised hosts file.
These need to be the only entries in your /etc/hosts file:-
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1       localhost
255.255.255.255 broadcasthost
::1             localhost
fe80::1%lo0     localhost
Remove anything below these entries, then try and reconnect with GC. Once GC starts properly you can put the extra entries back in your hosts file, GC should start normally afterwards.
https://discussions.apple.com/message/19276629#19276629
Jerry

"Error communicating with AdobeID server"

Every time I try to authorize my ADE, I keep getting this error message:
"Error communicating with AdobeID server. Please try again later.
E_ADEPT_IO AddSignInDirect Error%20#2032"
I've tried to authorize it more times than I can count over the past few weeks - anyone know what I can do to fix it?
It used to work just fine, but then I started getting error messages on any books I tried to download and nothing I did would fix it, so I tried uninstalling then reinstalling and it won't let me authorize it now (I tried authorizing with a different ID too, to see if that was the problem but it wouldn't work).

Hi,
As per the error message that you are getting E_AUTH_BAD_DEVICE_KEYplease follow the steps as given below.
1) Open Adobe Digital Editions.
2) Press Ctrl+Shift+D key of your Keyboard and deauthorize Digital Editions
3) Move your e-books to some different Location.
4) uninstall Adobe Digital Editions from your computer.
     Click start>>Control Panel>>Add or remove Program
     Select Adobe Digital Editions from the list and Delete.
5) Also delete following files.
    Click Start>>Run
    Type "regedit" without quotes in the box and hit enter.
    Locate the following key "HKEY_CURRENT_USER>Software>Adobe>Digital Editions"
    delete the full folder (Right click on it and click delete).
     Also locate HKEY_CURRENT_USER>Software>Adobe>Adept
     Delete the full folder.
6) Now download and install Adobe Digital Editions from the link given below.
     http://www.adobe.com/products/digitaleditions/
7) When asked to authorize computer then please enter same Adobe ID and password and authorize the same.
I hope this will help you!!!
Regards
Rizwan

Error communicating with AdobeID server. E_AUTH_BAD_DEVICE_KEY

Running Digital editions 1.5 on an Ibook G4 with OSX version 10.4.11
Installed digital editions, downloaded my book. Started reading, then needed to reboot machine. once I rebooted, I tried to open ADE once more, but I again had to "reactivate" the machine... once I try to reactive it I keep n getting stuck (whether I chose to authorize or not authorize the machine is irrelevant) on the same error...
Activate Digital Editions
Error communicating with AdobeID server. Please try again later.
E_AUTH_BAD_DEVICE_KEY
what's going on? When can I read my book? Is your server down? does this happen often? Is this related to the version of ADE?

Carolina,
regarding the E_AUTH_BAD_DEVICE_KEY error...
We can't tell you -exactly- what this is, but we can give you some general direction.
On the Mac, Digital Editions 1.5 stores an encryption key (to make sure our client to server calls are secure) in your OS X Keychain.
If there is a problem creating this key then E_AUTH_BAD_DEVICE_KEY is the error you'd see.
The key information is stored as an application password in your keychain. Likely causes of failure include denying access to Digital Editions, or locking your user keychain, and not entering their password when prompted.
If you're denying access explicitly to Digital Editions, well don't do that (ha. )
Now, you may not be doing this intentionally. The access permissions on OS X are complicated, so this could be a side effect of some other permission work. You can explicitly grant Digital Editions access to the the keychain item:
Open Keychain Access (Applications/Utilities)
Select Passwords from Category
Select Digital Editions from password list
Click info button (or press Cmd+i)
(Dialog labeled Digital Editions should appear)
Select Access Control tab
Click + button
Navigate to our install directory and select ADE 1x5
Click Save
Close Dialog
Launch Digital Editions.
Anyway, hopefully this helps you narrow the issue down.
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe

That sends me this error: There was an error communicating with the server, try later when I want to create a new Keynote presentation?

good day !!! I am trying to create a new presentation in keynote,
when selected sends me the following message: An error occurred while communicating with the server, try again later. I tried for
several days to make the presentation but I keep sending the same message. I'm trying to make it from the keynote
beta (from iCloud)

This is the Mac discussion, post your issue in the iWork iCloud discussion where folks who use iCloud can help you.
iWork iCloud Discussion

Remove-FASTSearchMetadataManagedProperty errors out with config server

Hi,
I have a problem when I execute the command: Remove-FASTSearchMetadataManagedProperty, it errors out with:
Remove-FASTSearchMetadataManagedProperty : Error when communicating with the config server 'The remote server returned
an error: (503) Server Unavailable.'.
At line:1 char:41
+ Remove-FASTSearchMetadataManagedProperty <<<< -Name TestMP -Force
    + CategoryInfo          : OperationStopped: (:) [Remove-FASTSearchMetadataManagedProperty], AdminException
    + FullyQualifiedErrorId : e552: Error when communicating with the config server 'The remote server returned an err
   or: (503) Server Unavailable.'.,Microsoft.SharePoint.Search.Extended.Administration.Commandlets.Schema.RemoveMetad
ataManagedPropertyCommand
but Get-FASTSearchContentCollection works just fine. If I reboot the server, the Remove-FASTSearchMetadataManagedProperty works ok again. I have SP1 and the Decemeber CU installed. Has anyone seen this?
Thanks in advance,
Frank Chin

I'm also getting this. Not sure what to do.. Did you manage to overcome this without re-booting?
Much Thanks!!
Freddie Maize ..A story with Glory is History. Doesn’t matter whether Glory rest in the world of Demon or God. Lets create History..

CDAU12035 Error communicating with Enterprise Server

I am getting this error when trying to get the Enterprise Data to display on the CAD. Anyone seen this before.

Hi everyone,
We just received this error message.... CDAUI2035 Error Communicating with the Enterprise service. We are using UCCX 9 and premium NO HA on this server.... What can we do to fix this issue?

Activate change lists error - Communication with JMS server failed

Hi,
I have this error message prompted when I try to activate my design object in Integration Builder :-
<i>Communication with JMS server failed Repeat the last action. If the problem continues to occur after multiple attempts, contact your system administrator to check the availability of the JMS provider service.</i>
Anyone knows where should I fix the errors ? Many Thanks in Advance.
regards

Hi,
I think you should check the JMS Provider service in the Visual Administrator.
Have a look at those help pages:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/90/57849e5e3e45d784afc4e3bfa8136f/frameset.htm">JMS Administration</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/a9/ad3d9ef22e4b2ea9752de8d98db5a4/frameset.htm">JMS Provider Service</a>
Best regards,
Manuel

ICal Error syncing with iCloud: server responded with "507" to operation CalDAVWriteEntityQueueableOperation.

iCal returns a "Server responded with "507" error
I have had this problem "resurface" regularly.
My last discussion with Apple Support lasted over 3 hours and Tech Support reached two conclusions;
1) Each Icloud user is allocated an undisclosed amount of memory for their calendars.
A user receives this error when you exceed this amount.
You cannot buy more storage, you do not know when this is going to happen and you cannot prevent it.
The error occurs when you exceed your limited, fixed amount of storage. 2) The only way to "fix" this is to delete events that are taking up too much storage. However, Apple doesn't have software that identifies the size of events (Apple referred me to expensive 3rd party software, Busy Cal , that doesn't work).
Any thoughts / ideas / work around you might have on this would be HIGHLY appreciated :-)
Thanks !

AHP,
The link that I gave you was pubilshed by Apple only 5 days ago on July 31st, so it is not surprising to me that the information has not filtered down to all support personnel.
How do you find out how much memory/ storage your iCal is currently using ? I wasn't able to find this on Settings. Also, any "effective" ways to search for 'heavy' attachments, or recurring items that might be clogging the account ?
The Calendars folder contains the relevant calendar data. It is located in the Macintosh HD/Users/yourusername/Library Folder. To find the correct Library folder, use Finder>Go Menu>Depress the "Option" key>Library. When you find the Calendars folder use the keyboard shortcut ⌘I to find out how much data it contains. That may, or may not be the same amount of information stored in iCloud, but it must be very similar. Use the same shortcut to find out how much data is stored in the sub-folders. Opening the attachmets folder should display the relevant attachment data. As a word of caution, do not delete, change, or modify the Calendars folder or the data contained therein in any way shape or form.

Error 1379 with Vi Server

Hi,
I had some problem to setup my PC to run an application as a VI Server. I always had the error #1379 "LabVIEW: The user failed a security authentication check." when my client vi tries to connect to the Vi Server.
We contact NI to have some inputs and the answer was:
...Another thing we can try is to put the device driver you are using on the
server computer. According to this discussion forum, this resolved the
error for some other customers of ours.
Error 1379 in Open Application Reference
http://forums.ni.com/t5/LabVIEW/Error-1379-occurred-at-Open-Application-Reference/td-p/356144/page/2...
So I try to install logos.mis that I found on the first CD of NI Device Drivers (D:\products\shared\logos\logos100). The problem: the logos installer starts but I obtain an empty window when they ask to select features to install (see picture attached) ???
The followup by NI was to tell us to install NI-DAQmx 8.1. So, I install all default compoments suggested by the NI-DAQmx 8.1 installer.
It works!
But we need to install the minimum drivers on the PC that will run the app Vi Server.
My question is: Why the logos installer gave my an empty features window (if it suppose to solve my problem)? And, what is the compoment installed on the server by NI-DAQmx 8.1 that solve the problem?
Application (exe) is running under a PC
OS: Windows XP Sp2 or Microsoft Server 2003 Sp2
Dev. with Labview 8.0.1
Labview Runtime copied (all needed dll are copied locally next to the app)
NI-VISA 3.6 installed
Regards,
Solved!
Go to Solution.

Hi Verne D,
My ViServer:MachineAccess was previously set with "*". My problem was resolve by the only fact to install NI-DAQmx 8.1 on the PC that's run the VIServer.
I saw in few posting that by only installing logos.msi (without any problem I supposed) solve the problem err #1379...
The thing is that I am not able to use the logos.msi : no features to install available (see picture at the beginning of the thread).
I want to install the minimum on my server PC, not all the NI-DAQmx 8.1 drivers.
NOTE that I solve the problem by installing default compoments suggested from NI-DAQmx 8.1 (it install over 75 compoments!).
How to know the only compoments (or mayby 2 or 3) needed to make the Vi Server running?
Regards,

Error openssl with Exchange server 2013?

I am newbie to OPENSSL world.I am trying into install openssl certification on my microsoft exchange server. For this I was following below article step by step. at one place I stuck while createing 'ca' and getting below errors.
I have created index.txt , serial files and have proper permissions.
article: http://www.stephen-scotter.net/computers/windows/exchange/using-openssl-to-create-a-certificate-for-exchange-2010
Using configuration from c:\OpenSSL-Win64\bin\openssl.cfg
C:\OpenSSL-Win64>bin\openssl.exe ca -name ServerCA -policy policy_anything -in SIFY_CA\requests\SIFYSERV4-EXCHANGE.csr -o
t SIFY_CA\certs\SIFYSERV4-EXCHANGE-WRONGFORMAT.cer -md sha1
Loading 'screen' into random state - done
Enter pass phrase for \\DALLAS\OpenSSL-Win64\SIFY_CA\private\SIFY_CA.key:
Error Loading extension section ca_cert
11128:error:02001002:system library:fopen:No such file or directory:.\crypto\bio\bss_file.c:169:fopen('\\DALLAS\OpenSSL-Win64\SIFY_CA\index.txt.attr','rb')
11128:error:2006D080:BIO routines:BIO_new_file:no such file:.\crypto\bio\bss_file.c:172:
11128:error:0E078072:configuration file routines:DEF_LOAD:no such file:.\crypto\conf\conf_def.c:197:
11128:error:2207507C:X509 V3 routines:v2i_GENERAL_NAME_ex:missing value:.\crypto\x509v3\v3_alt.c:537:
11128:error:22098080:X509 V3 routines:X509V3_EXT_nconf:error in extension:.\crypto\x509v3\v3_conf.c:93:name=subjectAltName, value=D
S:sifytech.com,DNS:www.sifytech.com;DNS:*.sifytech.com,mail.SIFY.com,owa.sifytech.com
openssl.cfg
HOME = \\\\DALLAS\\OpenSSL-Win64
#RANDFILE = $HOME\\.rnd
[ca]
default_ca = SIFY_CA
[SIFY_CA]
dir = $HOME\\SIFY_CA
certs = $dir\\certs
crl_dir = $dir\\crl
database = $dir\\index.txt
new_certs_dir = $dir\\newcerts
certificate = $certs\\SIFY_CA.cer
serial = $dir\\serial
crl = $crl_dir\\SIFY_CA.crl
private_key = $dir\\private\\SIFY_CA.key
RANDFILE = $dir\\private\\.rnd
unique_subject = no
email_in_dn = yes
policy = policy_match
x509_extensions = ca_cert
default_days = 18250
default_crl_days = 18250
default_md = md5
[ServerCA]
dir = $HOME\\SIFY_CA
certs = $dir\\certs
crl_dir = $dir\\crl
database = $dir\\index.txt
new_certs_dir = $dir\\newcerts
certificate = $certs\\SIFY_CA.cer
serial = $dir\\serial
#####crl = $crl_dir\\ServerCA.crl
crl = $crl_dir\\SIFY_CA.crl
private_key = $dir\\private\\SIFY_CA.key
RANDFILE = $dir\\private\\.rnd
unique_subject = no
email_in_dn = yes
policy = policy_match
x509_extensions = ca_cert
default_days = 18250
default_crl_days = 18250
default_md = md5
#####copy_extensions = copy
#####copy_extensions = none
[policy_match]
countryName = match
stateOrProvinceName = optional
organizationName = optional
organizationalUnitName = supplied
commonName = supplied
emailAddress = optional
[policy_anything]
countryName = optional
stateOrProvinceName = optional
localityName = optional
organizationName = optional
organizationalUnitName = optional
commonName = supplied
emailAddress = optional
[req]
default_bits = 2048
default_keyfile = privkey.pem
distinguished_name = req_distinguished_name
#attributes = req_attributes
x509_extensions = v3_ca
req_extensions = v3_req
[req_distinguished_name]
countryName = Country Name (2 letter code)
countryName_default = GB
countryName_min = 2
countryName_max = 2
stateOrProvinceName = State or Province Name (full name)
stateOrProvinceName_default = West Midlands
localityName = Locality Name (eg, city)
localityName_default = Birmingham
0.organizationName = Organization Name (eg, company)
0.organizationName_default = WHLB (Certificate Authority)
organizationalUnitName = Organizational Unit Name (eg, section)
organizationalUnitName_default =
commonName = Common Name (eg, YOUR name)
commonName_default = WHLB (Certificate Authority)
commonName_max = 64
emailAddress = Email Address
emailAddress_max = 64
[v3_ca]
#basicConstraints = critical, CA:true, pathlen:0
basicConstraints = CA:true
#nsCertType = sslCA
#keyUsage = cRLSign, keyCertSign
#extendedKeyUsage = serverAuth, clientAuth
nsComment = "OpenSSL CA Certificate"
crlDistributionPoints = URI:http://dallas.sifytech.com/SIFY_ca/crl/SIFY_CA.crl
[v3_req]
basicConstraints = CA:FALSE
keyUsage = nonRepudiation, digitalSignature, keyEncipherment
crlDistributionPoints = URI:http://dallas.sifytech.com/SIFY_ca/crl/SIFY_CA.crl
[ca_cert]
basicConstraints = CA:true
nsComment = "OpenSSL Generated Certificate"
subjectKeyIdentifier = hash
authorityKeyIdentifier = keyid, issuer:always
extendedKeyUsage = serverAuth, clientAuth
crlDistributionPoints = URI:https://dallas.sifytech.com/SIFY_ca/crl/SIFY_CA.crl
subjectAltName = DNS:sifytech.com,DNS:www.sifytech.com;DNS:*.sifytech.com,mail.intensify.com,owa.sifytech.com
What could be wrong? Did I miss anything here? Help me out?
ItsMeSri SP 2013 Foundation

Check whether this issue caused by Firewall. Disable Firewall and create a Exchange request, create a certificate on Public CA.

Error -2147023174 with DI Server

Similar Messages

Maybe you are looking for