Error -2147319779 Library not registered when trying to use ActiveX to open microsoft word

Hi
I am having problems when I try to run an executable on a PC. My Development PC that has Labview 8.2 and Microsoft Word 2000. I am able to run my vi (see pic attachement) without any problems. I compile it as an executable and run it on my Development PC and everything still works ok. I deployed it on another machine with Labview Run-Time Engine Version 8.2 and it works ok. I tried it again on a third PC and get the following error
Error -2147319779 Library not registered
All PC's are running windows XP and all have microsoft word 2000 installed.
I have tried uninstalling National instruments software (Run-time Engine) as well as Microsoft Word on the failing PC, but still no luck.
Does anyone have any suggestions.
Thanks
Steve
Attachments:
open word and save changes.jpg ‏59 KB

Hey Steve,
I hate to throw links at you, but it appears this problem has occurred with developers before.
Easy text Report.VI...not so easy (You have to love a title like that)
Problem with LabVIEW Run Time communicating with Access Database
These links may not seem relevant to your issue, but at its base the Report Generation and Database Connectivity toolsets are simply ActiveX/.NET calls into Microsoft products (or ODBC, etc.). This is similar to what you're doing.
Also, I would try reinstalling MS Office. This has been known to solve the problem.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

Similar Messages

Error -2147024894 when trying to use ActiveX Automation Open

Hello,
I use the Automation Open on an ActiveX Class (which is creatable when I choose it from the list). When I do this I get the error:
Error -2147024894 occurred at The system cannot find the file specified.
Does anyone know what this error means?
Thanks a lot,
Laurent

Hi Laurent,
This is usally caused by registration problems of your activeX server with Windows. This is usally done while you install a ActiveX capable application but it could fail. for more information see the attached Knowledge base. This deals with LabWindows/CVI and MS Excel but this is more a general issue.
http://digital.ni.com/public.nsf/websearch/7139D4FDE76185EE86257195007118EC?OpenDocument
Hope this helps
Thanks
Karsten

Keep getting error message appication not found when trying to use Firefox, recently had lightning strike neighborhood box.

also will not load automatically anymore since lost power few days ago.

Same issue to with Windows XP SP3 x86 with Java Runtime Enviornment 1.5.0_15
J2SE Enviornment 5.0 Update 15
Java 6 Update 17

Error in Java based iView when trying to use J2EE bean

I am trying to create a iView based on Java Portal app.
[Java portal app has dynPage based Portal App Object]
I created a PAR and uploaded to Portal. I created iView and worked it fine in (preview).
[iView created using "Content Administration -> Portal Content -> New From Par -> iView"]
I deleted my iView and removed my archive (using "Java Developer -> Portal Archive Deployer/Remover").
I changed java portal project so that I can reference a bean from J2EE app already deployed on server.
[Edited Portalapp.xml to add a
<property name="PrivateSharingReference" value="SAPJ2EE::service:p4, SAPJ2EE::test.myApp/myBean"/>
This time PAR installs fine, but when I try to preview iView, get following error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/htmlb/page/PageProcessorComponent.
Exception id: 02:36_11/08/05_0016_4991450
See the details for the exception ID in the log file
I removed "SAPJ2EE::test.myApp/myBean" from portalapp.xml and rebuilt PAR and rebuilt iView but I get same error as above.
1. Where are logs located (for iView errors)?
2. Any pointers on using J2EE bean? (I am trying to use step described in topic "J2EE Applications Access from Portal Applications" from manuals).
3. Do I need to reference any additional libraries to use p4?
Thanks.

The problem seems to be in portalapp.xml
I created second PrivateSharingReference in it
<property name="PrivateSharingReference" value="com.sap.portal.htmlb">
<property name="PrivateSharingReference" value=" SAPJ2EE::service:p4, SAPJ2EE::test.myApp/myBean"/>
I changed to be one entry only like
<property name="PrivateSharingReference" value="com.sap.portal.htmlb, SAPJ2EE::service:p4, SAPJ2EE::test.myApp/myBean"/>
Now iView works again....But still donot know where log is..

I get "An error occurred loading this content" when trying to use AirPlay with some iPhone videos

When trying to stream video via Home Sharing AirPlay from the Horse Racing Now iPhone app or TwinSpires mobile site to my new third generation Apple TV, I get the error message
An error occurred loading this content
Try again later.
The Apple TV seems to be playing everything else fine though. And I verified that the video is working on both sites. Any idea what's happening?

When trying to stream video via Home Sharing AirPlay from the Horse Racing Now iPhone app or TwinSpires mobile site to my new third generation Apple TV, I get the error message
An error occurred loading this content
Try again later.
The Apple TV seems to be playing everything else fine though. And I verified that the video is working on both sites. Any idea what's happening?

Time Machine Restore and now says Scanner not found - when trying to use

the printers.
Had a faulty harddrive -(per the apple store - this after replacing the screen and logic board...) - so they installed a new one - I restored from my time machine backup - and then went to use my HP 1315 Scanner. Didn't work - get error - scanner not found - even though I can print to the device.
So - I uninstalled and reinstalled the printer in the system preferences - but get same error - so instead I uninstalled all the HP apps and reinstalled them (a pain because HP doesn't make 10.5 software yet).
Still same issue - Scanner not found.
I was using this same scanner prior to the hard drive freeze. HP posts a notice that if you really want the hp software to work you should downgrade to Tiger, install, then reupgrade - but that seems like a lot of hassle to get a scanner to work.
Does anyone have another suggestion?

Thanks Barry -
I wish Profile allowed to list all of my computers and all of My OS systems - but it doesn't - so I'm forced to post each and every time whatever OS is causing whatever issue I'm having.
I have deleted and reinstalled several times to no avail. I do get an error on install that the HPIOX cannot launch...
I am a bit frustrated - this is the 5'th device an Apple upgrade has cost me...
All my belkin devices for my iphone don't work with the new iphone (they altered a pin configuration for the power)
The 1,000 upgraded car kit for Mercedes that I bought just a month ago -- worked great with Iphone 2g - doesn't charge the 3g
Leopard has killed my scanning capabilities...
It wouldn't be such a hard pill to swallow except I keep seeing that ad where the japanese girl comes by and the Mac guy starts talking japanese and the tag line "it just works" -
No - in fact - it doesn't.
My camera only shares pictures with the mac - movies require a 3 way translation
My printer will print - but not scan
My Mercedes car kit will play music - but not charge
All of these things worked with Tiger and Iphone 2g - seems to me like either Apple is trying to force profitability of its partners by forcing consumers to constantly upgrade to new equipment - or - they just don't give a s_t ----

I am trying to use the Find My Mac on iCloud. I keep getting the error message "No location available" when trying to use find my Mac. Any suggestions as to what to check?

I am trying to use Find My Mac on Icloud. It keeps giving me the error message No location available for my Mac. Any suggestions on what to check to correct this problem? Thanks!

http://support.apple.com/kb/TS4006

When I ask for a PDF file to be downloaded using FIREFOX it opens MIcrosoft Word.... in Japanese, I am not kidding!!

It does not happen in Chrome or Internet Explorer but I don't normally use them. I have done all the things they tell you to do, to set the default as Corel Fusion. I even went so far as to remove Fusion and try setting default at Adobe. It didn't stop the foolish changing over to Microsoft word in Japanese.... WIERD....

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Error "Application document not posted" when tried to receive an idoc

Hi All,
My scenario is File to IDOC. the idoc reaches the R/3, but when i check in the transaction we02, under Inbound IDOCS, i see my idoc in status 51 - Application document not posted.
Does it mean idoc has reached R/3, but it didnt update the respective table in R/3? i'm sending idoc of type MATMAS05, its supposed to update table MAKT, but its not. Do i need to make any special settings for this? pls help me, its urgent.
Thanks & Regards,
Bhavana

Hi,
The IDOC is successfully coming from XI, but there is problem in R\3 end.
Idoc status is 51 with "Application document not posted"
This indicates that the logic for posting the application document is not coded properly in inbound function module. Verify the logic once again.
Also you need to confirm that the data related or in application configuration is right. If the data values are not correct the above error get generated.
refer blow link for the program
http://help.sap.com/saphelp_nw04/helpdata/en/78/21760251ce11d189570000e829fbbd/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jan 28, 2008 11:13 AM

Getting error "This file was removed" when trying to use sdk/test/httpd.

Hi, I wish to test my website using httpd.js. Now when I am trying create a add-on and use sdk/test/httpd by adding following line
var { nsHttpServer } = require("sdk/test/httpd");
I am getting following error:
Message: Error: This file was removed. A copy can be obtained from:
https://github.com/mozilla/addon-sdk/blob/master/test/lib/httpd.js
As new to Add on development I am unable to resolve this issue.
Thanks in advance.

Apologies for redirecting you to a different site, but this forum primarily handles end-user support. For extension development advice, please try here: [https://forums.mozilla.org/viewforum.php?f=7 Extension Development - Mozilla Add-ons Forum].

Error when trying to use DO as "open collector" on PXI-6602

When I try to configure a DO of my PXI-6602 as "open collector" I receive the error -200452 ("Measurements: Specified property is not supported by the device or is not applicable to the task."). This is completely mysterious to me since the PXI-6602 should have this feature and my code (see attachment) is practically identical to any of the numerous examples for this topic. Am I overlooking anything really stupid? (LV 8.5, PXI-8145RT) Cheers, uli
Solved!
Go to Solution.
Attachments:
openCollectorTest.vi ‏14 KB

Hi uli,
Did you try setting DO.Tristate while the task is running? There are a few DAQmx devices that do not support setting DO.Tristate while the task is running, but I don't think that the PXI-6602 is among them. I don't have an actual 6602 installed but with a simulated PXI-6602 and DAQmx 8.9, setting DO.Tristate while the task is running does not error.
Using external hardware is perfectly fine, and should also work for timing I/O (whereas using DO.Tristate would only work for single-point digital I/O).
I don't see the text that you quoted in the NI 660x Specifications, so I don't know what context it was in, and apparently it has been reworded since then. Note that devices that support open collector output say "open collector (open-drain)" in their specifications; for an example, see the NI USB-6008/6009 User Guide and Specifications.
Brad
Brad Keryan
NI R&D

Sony pj650 says accessories not supported when trying to use Sony ecm-gz1m gun/zoom microphone.

The sony ecm-gz1m says it is compatible with cameras that have the multi interface shoe but when I plug it in it says accessories not supported.

Hi duszac,
Welcome to the Sony Community!
The ECM-GZ1M microphone is indeed compatible with the HDRPJ650V camera. But the Zoom mode is not going to work. Please detach the microphone from the camera, check the setting of your mic, and change it Gun mode before reattaching it again. We recommend attaching the accessories while the camera is turned off.
If my post answers your question,,please mark it as "Accept as Solution". Thanks_Mitch

When I downloaded Lion why did my microsoft word not work, When I downloaded Lion why did my microsoft word not work

Help!! My Microsoft Work does not work with Lion!! Now all my doc will not open

Because Office 2004 is a PPC-only suite and will not work with Lion. Upgrade to Office 2011 for OS X. Or you can try the freeware suite, Libre Office, whose functionality is similar to Office 2007 for Windows.

I keep getting result code -43 not found when trying to load certain instruments. Any idea why

I keep getting error code -43 not found when trying to load certain instruments. Any ideas?

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

BlackBerry Desktop Software displays the error "Caught _com_error exception. Description(): (null): Error(): -2147319779 (0x8002801D). ErrorMessage(): Library not registered.:Source(): (null)." when attempting to synchronize organizer data

BlackBerry Desktop Software displays the error "Caught _com_error exception. Description(): (null): Error(): -2147319779 (0x8002801D). ErrorMessage(): Library not registered.ource(): (null)." when attempting to synchronize organizer data.Can someone help me with this?

Tried clean wipe and reinstall. Immediately after reinstall of DM, in setting up my 9900 "for the first time", I received the following error message...
"Either there is no default email client or the current mail client cannot fulfill the messaging request. Please open Microsoft Outlook and set it as the default mail client."
I opened Outlook 2013 and checked that it was the default mail client. It was already.
After going in and clicking to confirm default email client, I was allowed to proceed to configure organizer sync settings. I configured memo only (one way from device). I then received the same error message that I was receiving (per my original post in the last message). I've previously tried configuring only one type of organizer sync and not one of them completed a successful sync, so it can't be a bad entry in the calendar or contacts. I also tried deleting CICAL entries for all of email addresses other than my primary one. No difference. Also, prior to setup and sync, I confirmed that my 9900 was not on wireless sync.
I was hoping that this was an old issue and I could use one of the old work-arounds, so if anyone has any ideas for something else to try, please let me know.
In the mean time, I have to assume that it's something that's changed with Outlook 2013 (particularly given the new error message I reported above. I hope that someone at RIM is aware of these error messages and is working on a compatibility fix for Office 2013.
Thanks in advance,
Sheldon
Twitter: @sheldonbk
Twitter: @sheldonbk

Error -2147319779 Library not registered when trying to use ActiveX to open microsoft word

Similar Messages

Maybe you are looking for