"Error -2147352573 occured at Member not found" when trying to open an excel template

I'm trying to open an excel document as a template using the report generation tools but coming up with this error.  I've traced the error to NI_ReportGenerationToolkit.lvlib:Excel_Open_Workbook.vi but have to idea why it's happening.  The document seems to be fine as I can open and edit it in Excel.  Has anyone else seen this?  I'm using Labview 8.6 and Excel 2000.  I've attached an image of the error and it's source.  Thanks.
Attachments:
Excel open error.doc ‏558 KB

Hi Mike,
Thanks for pointing out the compatibility issue. I got the error with version 1.1.3 and therefore upgraded to 1.1.4 - after taking a glance at the readme document. I guess that I was mistaking the supported OS version ("Windows Vista/XP/2000") with the supported version of MS Office ("2007/2003/XP").
I originally received the error when running an executable on a Office 2000 machine. The executable was built on a Office 2003 machine since I have previously been able to build on Office 2003 and run on 2000. I'm not sure what was different with this executable. Anyway, after installing the LV development system on the Office 2000 machine, the issue turned out to be that some ActiveX methods had been disconnected. All I had to do was re-point the Invoke Nodes to the appropriate ActiveX methods.
Please note that my application in this case is very simple and therefore only exposes a small part of the Office 2000 ActiveX API. I'm sure that I would run into a non-compatibility wall if I were to implement more Office 2000 functions with RGT 1.1.4.
Message Edited by Philip Courtois on 06-18-2009 01:26 PM
- Philip Courtois, Thinkbot Solutions

Similar Messages

  • Cs5 gives error that camera type is not supported when trying to open raw files but worked fine earlier

    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information.
    THis is what I get when trying to open files. Half my session opened fine then all of a sudden i get this error. Won't open in LR5 Either. HELP! using LR5 AND CS5 ON A IMAC with a canon 5dm3. everyhting is up to date as i I checked..

    I will try that now. It reads that it is up to date but I will reinstall. The session after it loaded just fine on the same card

  • Lookout 6.0.1.: Class Not Found when trying to open project on another PC

    I am using the same version on both PC's, but when I move the file over and run it, I get "Class not found!". Then "Error running process file".When running the lookout source file I get the following:
    Lookout Process File Compiler Version 6.0.1 (build 1)
    Copyright National Instruments 1992-2004  All rights reserved.
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(324): error: Class not found: DirectLogic
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(667): error: Class not found: Meter
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(670): error: Class not found: Meter
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(673): error: Class not found: Meter
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(676): error: Class not found: Meter
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(1977): error: Class not found: Meter
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(57): error: Object is not defined: DL1
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(667): error: Object is not defined: Meter1
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(670): error: Object is not defined: Meter2
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(673): error: Object is not defined: Meter3
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(676): error: Object is not defined: Meter4
    I have also tried to open on 6.1 with similar results.
    I am familiar with lookout, however I have taken this project over so I am not sure what I need to do from here.

    There are two object (DirectLogic and Meter) that are not present on the amchine you are moving the process to.   If the same version of Lookout, you might be able to just copy the cbx files.
    Mike
    Mike Crabtree - Lead Developer
    Destek of Nevada, Inc. / Digital Telemetry Systems, Inc.
    (866) 964-6948 / (760) 247-9512

  • Apple Application Support not found when trying to open iTunes

    iTunes not opening. Error 2 message keeps popping up saying that Apple Application Support is not found. (Dont' know where it went!!!) It's asking me to uninstall and reinstall iTunes. B4 I do, will I lose my library and have to start over?

    downloaded winrar and extracted that bfile, haha answered my own question,

  • Getting Entry Point Not Found when trying to open Premiere CS5.

    This program was coming up when first installed.  I checked the forum and the last discussion was in 2010 and I have uninstalled the creative suite production premium and re-installed.  I need help asap because I have an editing job to start.  Please help...

    Before re-installing did you run the Cleaner tool ?
    http://www.adobe.com/support/contact/cscleanertool.html
    Maybe something was missed when you un-installed it.
    GLenn

  • Keep getting Disc Burner or software not found when trying to burn a CD

    I am not able to burn a playlist to a CD and get an error at the top of Itunes window "Disc Burner or Software Not Found". I have been able to burn CDs in the past with this same computer but had some issues with songs in itunes. Support had me uninstall Itunes and reinstall. I have also uninstalled the device in the device manager and re-installed it. I really don't know what to try except to ask for help here. I would appreciate any direction I can get. I have a Dell desktop XPS running on Windows 8.

    Hi daurel, 
    Thanks for participating in the Apple Support Communities. 
    It sounds like you receive the error "Disc Burner or Software Not Found" when trying to burn CDs. You mention that you've already tried removing and reinstalling iTunes, and other drivers, and these are good steps. 
    If the situation continues, be sure to try the tips in this article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
    Sincerely,
    Jeremy 

  • Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc.

    Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc.  Windows 7

    Hello queenabs,
    It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found."  I found a couple of resources that I think might help with an error like this.
    I recommend starting with the steps in this article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1923 did anyone get the apple application support was not found when trying to instal?

    I am having trouble instaling itunes.  has anyone got the apple application support was not found when trying to instal itunes?  it looks like it is not installing all of files to my computer and it can not reach a certain folder

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I keep getting result code -43 not found when trying to load certain instruments. Any idea why

    I keep getting error code -43 not found when trying to load certain instruments. Any ideas?

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • Getting error "Object variable or with block variable not set" when trying to open a FR report in studio

    Problem Description
    We are on FR 11.1.2.2.305 installed on AIX. a user is getting this error: "Object variable or with block variable not set" when trying to open a FR report from FR studio client installed on windows xp . Initialy, we thought it may be a FR client installion issue. We uninstalled and cleaned up registry and did a fresh installation of the client but the issue still persists. The FR server and the client are on the same version.
    The user is a LDAP user who is facing the issue. We have confirmed with other users and they dont have any issue accessing FR report from their own client but when they try to connect from the users machine who is having issues, the others users also see the above error. All the users are ldap users and all belong to same shared services groups so the provisiong is the same.
    Any input will be appreciated.
    Thanks

    OK, in this case of one single computer, please make sure that settings as per below KB document as in place and then validate the issue:
    Internet Explorer (IE7, IE8, IE9 and IE10) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
    The information in this document applies to the following Enterprise Performance Management products:
        Calculation Manager
        Data Relationship Management (DRM)
        Enterprise Performance Management Architect (EPMA)
        EPM Workspace
        Essbase Administration Services (EAS)
        Financial Data Quality Management (FDM)
        Financial Management (HFM)
        Financial Reporting
        Foundation Services
        Interactive Reporting
        Planning
        Shared Services
        Web Analysis
    Thanks!

  • Why do I keep getting actionlist not found when trying to update to version 11.6.602.180?

    WHy do I keep getting actionlist not found when trying to update to update to version 11.6.602.180?

    This problem and others are outlined in this help document.  In addition, please try installing from the appropriate stand alone Windows installers located here:
    Installation Problems - Flash Player - Windows

  • It says "request resource not found" when trying to restore my iphone 4s

    it says "request resource not found" when trying to restore my iphone 4s

    This article is for iPhones that are unable to be restored.
    You may have to try recovery mode (as described below) more than once.
    http://support.apple.com/kb/HT1808

  • 'File in Use' message is received when one user is in the report and another user tries to open the Excel template

    ‘File in Use’ message is received when one user is in the report and another user tried to open the excel template. how to make excel template shared for multiple users so the users don’t see the ‘File in Use’ message?

    Hi Febin,
    In addition to others’ replies, we can create a shared workbook and place it on a network location where several people can
    edit the contents simultaneously. For example, if the people in your work group each handle several projects and need to know the status of each other's projects, the group can use a shared workbook to track the status of the projects. All persons involved
    can then enter the information for their projects in the same workbook.
    Regarding how to do this,
     the following article can be referred to reference.
    Use a shared workbook to collaborate
    http://office.microsoft.com/en-in/excel-help/use-a-shared-workbook-to-collaborate-HP010096833.aspx
    Best regards,
    Frank Shen

  • Error 48: File or folder not found when using photomerge panorama - imac photoshop elements 10

    Any help is appreciated.  Followed the photomerge panorama instructions and got error 48: file or folder not found.....line 16 ...
    using photoshop elements 10 on imac with OSX 10.8.2
    Thx

    Have you recently updated your Operating system? Please try repairing permissions for your hard disk.
    Please check the help document to know more about repairing permissions http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html#main_Solutio n_3__Repair_Disk_Permissions

  • I am receiving the message "disc burner or software not found" when trying to burn a playlist to a blank disc.

    I ran the diagnostics test and the program was unable to detect a prerecorded cd. This is a fairly new problem and I am not sure what to do.
    The results to the diagnostics test are below:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Dell Inc. Inspiron 5520
    iTunes 11.0.4.4
    QuickTime 7.7.4
    FairPlay 2.4.14
    Apple Application Support 2.3.4
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0035BB400AFA2018
    Current user is not an administrator.
    The current local date and time is 2013-07-14 17:29:40.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is disabled.
    HDCP is supported.
    Core Media is not supported. (16002)
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics 4000
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.4.4 (x64) is currently running.
    iTunesHelper 11.0.4.4 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    Failed while scanning for CD / DVD drives, error 2380.
    Error while opening iTunes CD driver.  This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.

    Hello queenabs,
    It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found."  I found a couple of resources that I think might help with an error like this.
    I recommend starting with the steps in this article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • DMS Document not getting created thru Webdynpro ABAP Strange Problem

    Dear all, My requirement is that I have a Webdynpro ABAP application sitting on SAP Server1 and I am having a FileUploadUI Element in there for uploading files and we have SAP Server2 with the DMS configured. So, what we have done is we have an RFC i

  • JMS sender communication channel content conversion

    Hi, I struck with the content conversion in the JMS Sender communication channel. I have configured the communication channel with the filed fixed lengths. (Simple type) The field fixed lengths i have given are 10,2,3,11 The contents in the file 1000

  • Mac book starts up well, but without screen

    HI guys! today i restarted my Macbook pro-Lion, after starting up, i have no screen,even no gray screen or nothing els. However, my keyboard works; lightening,sound control or other keys are working properly. I can control the volume, and also contro

  • Imp-58 ora-1438 import 10.1.0.2 on AIX 5.3

    I am making a import user for user from database 10.1.0.3 (Linux) to 10.1.0.2 (AIX) and get the following erros: . . importing table "CAD_DILIGENCIA" IMP-00058: ORACLE error 1438 encountered ORA-01438: value larger than specified precision allows for

  • Why won't iMovie load?

    I have just purchased this computer. I installed OS X Leopard and iLive '08 so that I can work with HD video from Sony HDV-SR11. The iMovie does not load. Suggestions welcome. Donald