Error 229665 when run ContGen-IntClk.c (example file) pci 6229

Dear All:
I try to use pci 6229 to send analog signal by using the given example program, ContGen-IntClk.c, in DAQMX 8.3.
I use Visual c++ 6 to compile it.
After I run the exe file, monitor show error
"DAQmx Error: Internal software Error occureed in MIG software.
Status code: -229665"
(Note: the result was the same, when I did with visual basic)
How should I solve this problem?
My computer has  operating system: Microsoft XP 2002, CPU p4. 
Thank you,
Thongchai Phairoh.

Hey Thongchai,
Thanks for contacting National Instruments.  This error is usually associated with Measurement and Automation Explorer having a problem with it's database and is usually fixed with a reinstall of the driver or repair of the driver.
You could try a few things to attempt to resolve this issue. 
Attempt to repair the driver from the Control Panle and highlighting National Instruments and click, Change\Remove and highlight NI-DAQmx and click the repair button.
Reinstall the DAQmx 8.3 driver.
Upgrade to either 8.3.1, or to the newest version 8.5
Let me know if you are able to resolve this with any of these options.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search

Similar Messages

  • Runtime Error  -GETWA_NOT_ASSIGNED when running COI

    Hi ALL,
    We are getting run time error -  GETWA_NOT_ASSIGNED when running COI tasks.
    Error analysis
         You attempted to access an unassigned field symbol
         (data segment 32995).
         This error may occur for any of the following reasons:
         - You address a typed field symbol before it is set using ASSIGN
         - You address a field symbol that points to a line in an internal table
           that has been deleted
         - You address a field symbol that had previously been reset using
           UNASSIGN, or that pointed to a local field that no longer exists
        - You address a global function interface parameter, even
          though the relevant function module is not active,
          that is it is not in the list of active calls. You can get the list
          of active calls from the this short dump.
    How to correct the error
        You may able to find an interim solution to the problem
        in the SAP note system. If you have access to the note system yourself,
        use the following search criteria:
        "GETWA_NOT_ASSIGNED" C
        "CL_UC_COI_ACT_PT==============CP" or "CL_UC_COI_ACT_PT==============CM00P"
        "REDUCE_GOODWILL_ENTRIES"
        If you cannot solve the problem yourself and you wish to send
        an error message to SAP, include the following documents:
        1. A printout of the problem description (short dump)
           To obtain this, select in the current display "System->List->
           Save->Local File (unconverted)".
    2. A suitable printout of the system log
        To obtain this, call the system log through transaction SM21.
        Limit the time interval to 10 minutes before and 5 minutes
        after the short dump. In the display, then select the function
        "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
        supply the source code.
        To do this, select the Editor function "Further Utilities->
        Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
        or which actions and input led to the error.
    Information on where terminated
        The termination occurred in the ABAP program "CL_UC_COI_ACT_PT==============CP"
         in "REDUCE_GOODWILL_ENTRIES".
        The main program was "UCUWB000 ".
        The termination occurred in line 722 of the source code of the (Include)
         program "CL_UC_COI_ACT_PT==============CM00P"
        of the source code of program "CL_UC_COI_ACT_PT==============CM00P" (when
         calling the editor 7220).
    702   call method do_inv_net_change->create_data_reference
    703     exporting
    704       i_type   = cl_uc_coi_inv_net=>gc_ref_pt_block
    705       io_model = do_model
    706     importing
    707       er_data  = lr_t_data.
    708   assign lr_t_data->* to <lt_share_block>.
    709   call method do_inv_net_change->get_block
    710     importing
    711       et_pt_shares = <lt_share_block>.
    712
    713   create data lr_s_data like line of <lt_share_block>.
    714   assign lr_s_data->* to <ls_share_block>.
    715 * change due to selling invor's transaction
    716   read table <lt_share_block> into <ls_share_block> index 1.
    717
    718 * direct shares prior to divestiture
    719   assign component 'R_TH_DSH_OLD'
    720     of structure <ls_share_block> to <lr_th_dsh_old>.
    721   assign <lr_th_dsh_old>->* to <lt_dsh_old>.
    >>>>   create data lr_s_data like line of <lt_dsh_old>.
    723   assign lr_s_data->* to <ls_dsh_old>.
    724   assign component ucf6_cs_coi_fld-pcnt1
    725     of structure <ls_dsh_old> to <pcnt1_7a>.
    726
    727 * change of direct shares in divestiture
    Please provide your suggestions.
    Edited by: VM2727 on Feb 10, 2012 3:27 AM

    Or even these ones:
    SAP Note 1480856 - C/I: Program termination GETWA_NOT_ASSIGNED
    Symptom
    When you execute the consolidation of investments, a program termination
    occurs (short dump GETWA_NOT_ASSIGNED in the method CREATE_OCI_LIST of the
    class CL_UC_COI_ACT).
    Note 1467924 - Termination GETWA_NOT_ASSIGNED in CL_UC_COI_ACT_PD
    Symptom
    When you execute the consolidation of investments, the program termination GETWA_NOT_ASSIGNED occurs in the method CALC_NET_INCOME_MEM of the class CL_UC_COI_ACT_PD.

  • Error Message when running BI Publisher

    Hi-
    Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
    Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
    Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
    Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
    Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
    Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
    Any idea regarding the error message
    Regards,
    MACD

    Did your custom report ever ran successfully in the environment you are getting the error.
    Most of the time not all the report definition and associated definitions are migrated to the next environment.
    Have a look at following doc:
    E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1)

  • A critical program error occured when running a workbook

    Some end users get a critical program error occured when running a workbook when they want to make selections.
    In the trace they get the following message
    System.ArgumentException: Item has already been added.  Key in dictionary: "44ABATDK7TYM365CYLQ0VDKU6"  Key being added: "44ABATDK7TYM365CYLQ0VDKU6"
    This happens only on some PC clients !
    Thanks for any help !
    Ivan

    Hi Vid,
    Thanks for your suggestion.
    I am using a different patch i.e.
    BI AddOn 7.X (based on 7.10), Support Package 5, Revision 1083
    and it helps to solve my problem.
    Cheers.

  • Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

    error message when running the FSPCCURR - PS/Fin MultiCurrency Process
    =====================================================
    2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
    2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
    2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
    2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

    Hi 841037,
    We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

  • Error message when running form

    hi everybody,
    im getting this error message when running a simple form.
    Positional Parameter after key command line.
    Can anyone please help.
    thnk u

    Check the path to your form. Forms does not like spaces in the path or fmx filename, but the error doesn't explain the problem at all!

  • I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

    I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

    Try Here  >  http://pondini.org/TM/C12.html
    More Info here  >  http://pondini.org/TM/Time_Capsule.html

  • Receiving Error Message when running sh rep_populate.sh

    Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
    Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
    THIS PROGRAM IS DEPRECATED!
    You should be generating xml metadata instead.
    Please see http://linux.duke.edu/metadata
    After executing following instructions and replacing server name with our server name.smmj.com
    Client Setup
    1. Import the GPG key
    rpm --import /usr/share/rhn/RPM-GPG-KEY
    2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
    up2date default
    to
    #up2date default
    and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
    Enterprise Linux 5
    (commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
    (commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
    #yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
    #yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
    #yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
    #yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
    #yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
    #yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
    #yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
    #yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
    #yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
    and running additional instructions
    2. Run up2date to install python-urlgrabber.
    up2date -i python-urlgrabber
    Receiving following error
    There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
    Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
    is called public-yum-el5.repo
    Made following changes in that file
    Enterprise Linux 5
    [el5_latest]
    name=Enterprise Linux $releasever - $basearch - latest
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
    gpgcheck=1
    enabled=1
    [el5_addons]
    name=Enterprise Linux $releasever - $basearch - addons
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
    gpgcheck=1
    enabled=0
    [el5_oracle]
    name=Enterprise Linux $releasever - $basearch - oracle
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
    gpgcheck=1
    enabled=0
    [el5_ga_base]
    name=Enterprise Linux $releasever GA - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u1_base]
    name=Enterprise Linux $releasever U1 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u2_base]
    name=Enterprise Linux $releasever U2 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u3_base]
    name=Enterprise Linux $releasever U3 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_ga_patch]
    name=Enterprise Linux $releasever GA - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u1_patch]
    name=Enterprise Linux $releasever U1 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u2_patch]
    name=Enterprise Linux $releasever U2 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u3_patch]
    name=Enterprise Linux $releasever U3 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
    gpgcheck=1
    enabled=0
    Then ran following commands
    up2date -u
    Output
    There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
    yum update
    http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
    Trying other mirror.
    http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
    Trying other mirror.
    Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
    We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
    Thanks, for your help

    We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
    Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
    When we go to System, Administration, Server Settings, Services, Samba is also not there.
    Nowhere can we find an easy way of installing samba on this Linux OS.
    I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
    I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
    I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
    This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

  • Error message when running Transaction Code = ME84

    hi,
    i am getting an error message when running Transaction Code = ME84
    Error is 'No processing (error message P5 017), No data for chosen selection'
    can someone please guide me on this ?

    Hi Mahendra,
    There are several reasons for the release not happeneing.
    1. The issue could be in the selection of release type
    2. Scope of selection
    3. Strategy profile
    Please check whether the selection parameters are considered are right for release to happen.
    Regards,
    Harish

  • Following error occurring when running application in wireless tool kit

    Hi
    Following error occurring when running application in wireless tool kit
    java/lang/ClassFormatError: Bad version information.
    can any suggest y ?

    Hi,
    I am also facing the same problem......................
    java/lang/ClassFormatError: Bad version information
    The error occurs when I try to simulate the mobile device using wireless tool kit. Does it have anything to do with the antivirus/firewall running on my system?
    Did Ram get a solution to his problem? Can anybody please help?
    Many Thanks
    Merin
    HI
    Sorry i could not find any related information there
    the version of wireless toolkit i am using is 2.1
    well in release notes its given that it also
    supports cldc1.0 and midp1.0
    presently i am using cldc1.0.4 and midp1.0.3
    versions
    is there any version compatability error
    please suggest me its quite urgent

  • Error message when I try to copy new files (images, documents) to mac from flash drive/SD card

    I am recieving an error message when I try to copy new files (images, documents) to mac from flash drive/SD card. The message is saying "operation cannot be completed because an item already exists with that name." They are brand new therefore not the same name? I cannot even put them in a brand new folder...  How can I fix this?
    Please help me!

    You don't need to recover the system.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press the space bar:
    dot_clean -m
    Switch to the Finder and drag the icon of the flash drive into the Terminal window. Some text will appear after what you entered. Press return.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.

  • I get error 23132 when trying to open a M4v file

    I use to be able to play m4v files on both iTunes and Quick Time 7. Suddenly, after upgrading iTunes, I get error 23132 when trying to open a M4v file. How do I fix it to view the files on QuickTime?

    There is software you installed to work with your company's cloud service, update it or talk to the developer.
    If it's Apple's software,  then run through this list of fixes.
    ..Step by Step to fix your Mac

  • Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank

    @Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank you!

    Without proper system information and other details like what files you work with  nobody can tell you much. From corrupted prefs to issues with your PS swap file to actual problems with the fiel storage this could be anything.
    Mylenium

  • I keep getting write errors (-50) when I try to create new files or folders on my Gen 5 Airport Extreme USB disk.

    Write errors (-50) when I try to create new files or folders on my Airport Extreme USB disk. Restarting the Airport Extreme seems to solve the issue. Any idea why this occurring? It doesn't seem to be OS specific, meaning I can't write to the drive from a Windows PC or a MacBook Pro.

    Although, I would consider it rare, it is quite possible that this drive is just not 100% compatible with the AirPorts. Typically, in these cases, the AirPort will not even recognize the drive at all ... or it will, but not allow you to access it. I actually haven't come across a case where you can read but not write to a drive consistently or vice versa ... except from Windows-based computers. Sorry!

  • An unknown error appears when I try to save older files in CC 2014. If I outline the fonts, I can save.

    An unknown error appears when I try to save older files in CC 2014. I can save the file if I outline the fonts. Is anyone else having this problem?

    It also happens with my illustrator.
    Have you found a solution with Adobe Support?
    You can transform the all fonts in curves, but itll be impossible edite again. Sad. too sad.

Maybe you are looking for