Error 2324 when installing new version

Got the following error when installing new version.
The installer has encountered an unexpected error. This may indicate a problem with this package. The error code is 2324                   
Also Tried to uninstall after this so I could install from scratch but that failed too. Now, iTunes is in a complete mess where I cannot use, uninstall or install.
No idea what to do now.

Greetings stain3565,
If you are having an issue with installing an update for iTunes for Windows, I would suggest that you troubleshoot using the steps in this article - 
If you can't install or update iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L 

Similar Messages

  • I keep getting error 2324 when upgrading to version 10

    I keep error 2324 when upgrading to version 10. Running win 7

    Try disabling anti-virus also. You can also download the updates (not upgrade that is AA XI) from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows. With the downloads, you typically have to install them in order. Only reboot after the last install.

  • Error occur when download new version of Air application

    Hi All,
    Error occur when download new version of Air application.
    the error is given below
    "There was an error downloading the update. Error# 16824"
    Please help me
    Regards,
    Abhilash S

    If on windows, take a look at the following file to see what's going on:
    c:\Document and Settings\User Name\Local Settings\Application Data\Adobe\logs\Install.log
    Common issues:
    The version number specified in the application.xml file of the download is not the same as the value specified in the update.xml file.
    The application ID of the new file is not the same as that in the old file.
    At any rate, the probable in most probably due to an invalid value in the application descriptor file.

  • HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

    I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

    Hello Valerie Anderson,
    I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
    https://discussions.apple.com/message/21854775#21854775
    Let me know if this helps.
    Thanks!
    Harry

  • HT1926 When Installing new version error is quicktime cannot uninstall old version

    When trying to install new version of Quicktime, I get a error message that quicktime cannot uninstall old version. This also affects Itunes to work. Get Message Itunes has encountered a problem and needs to close. I think not having quicktime working affects my Itunes from launching.

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up").
    In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

  • HT1926 I am getting error 7 (windows error 126) when installing latest version of itunes.  I have tried uninstalling and reinstalling and keep getting the error.  What is wrong?

    I am getting error 7 - windwos error 126 when installing the latest version of itunes.  I tried uninstalling and resinstalling several times.  Everytime it tries to start up itunes after install it gives some error about connecting a mobile device and then it gives the error.  Help.

    Hello agurpi,
    The following article provides steps that can help resolve this error.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

  • Error when installing new version od adobe flash player

    tried to install latest version of adobe flash player. a script error message at line # 1 missing object ...
    HAPPENS when dowlonding the script an when runing it from the site

    Thanks.
    I'm using windows XP 32bit with explorer 8.
    The current flash player version is 11.3.300.271
    The error occurs after initialization and during  the retrieve session.
    The script error is missing object at line 1
    Hanan

  • Error message when installing new OS 10.3.1

    hi
    I have tried to install the new OS update on my z10 and I get a error message at 15% of the installation process through blackberry link. I have tried to reistall several time and I get the same error every time..I have also tried to install it through a WIFI connection. through the Wifi connection it goes through the installation process without a error but when it restarts it still hasnt installed the new OS update, it still has the old version installed.
    Solved!
    Go to Solution.

    OK, so it sounds like you have only tried the OTA method so far. As such, please now try the LINK method. If that fails, then try an AutoLoader. Be sure you have a good backup before you start, as well as full manual documentation of everything (just in case you can't restore from the backup).
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • "Extraction Failed: Cannot Open Output File" error message when installing new drivers

    Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer.  I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
    Extraction Failed
    Cannot Open Output File
    And the process closes.  It happens at about 85% extraction every time.
    Any idea why?  I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support??  Poor, poor customer service.
    This question was solved.
    View Solution.

    Hi,
    If you haven't still got the  Full Feature software installer, download it from the link below and save it to your Desktop.  If you already have it, place it on your Desktop.
    ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
    Make sure the Printer is disconnected from your PC.
    Download and install 7-ZIP.  Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
    Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ).  Connect the printer to your PC when the software asks.
    Hope this helps.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Error 322 when installing new router

    I encounter this error when installing my new router. It says that my new router is not detected or something. Actually, after step 4, its says : New router or gateway not detected.
    What should I do or check?  
    Thanks

    Hey first of all try resetting the router reset button in such a way that power
    light is blinking on the router & then do a complete network power
    cycle i.e., unplug the power cables from the modem & from the router &
    then plug in the power cable to the modem first once all the lights are
    solid green you could plug in the power cable to the router & check out
    it will definately work!!

  • Administrator error message when installing new software

    Hi~
    I am working with an ibook on OS X.2.8. I gave this computer to my dad when I got a new one and set up an account for each of us, both with administrator priviledges. I just tried to install new software and it keeps telling me that I don't have permission to install software on the default location of macintsoh HD and to check with the administrator... even though I am the administrator. It didn't offer me an opportunity to enter a password or to install the software in an alternate location. I tried installing a different program to see if it was a problem specific to this application and found the same difficulty. I tried both accounts and this happened in both. Then I tried setting up a new account as an administrator and this didn't work either. Then I delelted all accounts except for my dad's account. I've checked the permissions in system prferences mutliple times. Nothing works. Any ideas? I would appreciate any help as this is very frustrating and this computer will soon be useless if we are unable to install updates or new software.
    Thanks and have a beautiful day!
    C

    Hi xinaroyall, and welcome to the forums!
    This is the Tiger/10.4.x forums, but we'll try to help.
    I've checked the permissions in system prferences mutliple times.
    You nreed to repair them in Disk Utility, then reboot, but I'd make second admin account again for safety.
    Let's see where we are after that.

  • The setup not auto detect to force close or notify user close current process when install new version

    I created an Project 2010 add-in and create two setup project for it the one for Project 2010 32-bit and another for 64-bit. The Add-in is loaded work fine on both project bit version. just i got an problem on 64-bit version setup.
    My IDE is Visual Studio 2008.
    The setups project has some settings:
    DetectNewInstalledVersion: true
    RemovePreviousVersions:true
    My problems is:
    - I create old version of Add-in setup version and install it (Version:1.0.0).
    - I open Microsoft project 2010 (add-in is loaded and ready to work).
    - I build a new version of add-in (Version:1.0.1, Product-Code is changed,  Upgrade-Code is same as old version)  and install it. Setup is complete and not notify the Project is current running and must be closed to install. the old files (myaddin.dll)
    not be written by new files.
    - I close Project and open again. My add-in is not changed.
    The problem is not occur on 32bit version of add-in.
    Please help me resolve this problem. how i can force the setup detect my component  is current using by another process and must be close that process to install.

    Hi phide,
    The forum supports VS setup and installation. I think your issue is not about the forum. Please give me more information about your project. I will help you move your issue to the related forum.
    Please your project type and programming language.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Why do I get an error message when installing latest version of Java in my Maverick system?

    I have been trying t install Java 10.5 update 4 in my computer.  My compputer was upgraded from Mountain Lion to Mavericks. 
    Whenever I try the install Java, I get an error message saying Java for Mac 10.5 update 4 can't be installed on my disk, as that software can only be installed on Mac OS X Leopard.  I know Java 10.5 is the lattest version, so why can't I install in on my Mavericks system?

    10.5 is too old for Mavericks.  You want the update from http://www.java.com/
    Java 7v52 is the latest Java.  

  • Itunes Not Working When Installing New Version

    I installed the newest version of itunes today. I was a bit afraid that it wouldn't work, because the last time I installed Itunes 5, it stopped working. But 3 days later, Itunes started to work again.
    Well, the same thing happened this time and it's not working.
    I tried uninstalling quicktime and 're-installing/repairing' itunes, but that's not working.
    I haven't uninstalled itunes because I don't know what will happen with my purchased music. So, if I did uninstall itunes and later on try to install itunes again, what would happen with my purchased music?
    And any suggestions as to how I can get itunes working?
    Thanks.

    hi thegoodfight!
    And yes, I do have Norton Internet Security 2005 installed on this PC.
    ... thought so. every now and then the NIS 2005 itunes "error-message-free" launch suppression problems would clear up overnight of their own accord.
    lets give the trusty Lorraine M technique a whirl. (it's the most reliable technique i've seen with regard to fixing the NIS 2005 things.)
    Lorraine M: NIS/itunes problem rectified
    if no joy with that, we'll try working through another few possibilities with the error-message-free launch suppression problems.
    love, b

  • Error message when installing new update

    I went to go and install the newest updated and half way through it stopped and told me it failed.
    so I went to install it again and it went through fine and updated
    I went to go and open iTunes and now I am getting this error message
    The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll
    I hit okay and then I get the message
    iTunes did not install property. windows error 127. please reinstall iTunes
    so now it wont let me even open iTunes so I went to the website and manually downloaded.
    it says it downloaded and repaired the files but I still continue to get the same error message listed above.
    can anyone help??

    Hey ueckersam,
    Thanks for the question. If I understand correctly, you are having trouble installing iTunes on windows. I would recommend that you read this article, it may be able to help the issue.
    Issues installing iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

Maybe you are looking for