Error 2416 at CS4 install during "profile checking" which stops at 90%

Hello all,
I found hundreds of similar questions in the Internet, and none find any answer but reinstalling XP which is for me absolutely excluded.
I spent the whole week with Adobe Support which didn't help (all suggestions yielded no fix)
The situation is the following one:
I installed CS4 on a new system running XPP SP3. Install went ok.
I then installed W7 on a secondary disk, which didn't go through
I had to fight to fix my dual boot, then I finally reinstalled XPP (via the CD and the REPAIR feature). This removed my Photoshop product and all others by the way.
So, I reinstalled all my stuff, fine, until it was CS4 turn.
All attemps to install CS4 give a hang at 90% of the "Profile checking" phase.
The last lines of the log are never the same as far as the ERROR number is.
How come ???
This time, I have:
Property(S): ROOTDRIVE = C:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
=== Logging stopped: 17/06/2011  12:17:55 ===
1: 2 2: 0
1: 2 2: 1
Installation result: 0
[    2416] Fri Jun 17 12:17:55 2011 ERROR
Log of: object
isRunning {string}: 0
percentComplete {string}: 100
message {object}: [object Object]
Log of: object
    code {string}: 0
    args {object}: [object Object]
[    2416] Fri Jun 17 12:19:07 2011  INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Adobe support suggested to :
create a new account
remove Google desktop
remove Adobe Flash Player
"purchase" PC Scan & repair to fix error exwhyzee
Close my rear window
give milk to the cat
say hello to my neighbour
and
run in circles five times around my dining room table
None of these attemps give any result.
Any other idea, anyone ?
Thanks.

Hello all,
I found hundreds of similar questions in the Internet, and none find any answer but reinstalling XP which is for me absolutely excluded.
I spent the whole week with Adobe Support which didn't help (all suggestions yielded no fix)
The situation is the following one:
I installed CS4 on a new system running XPP SP3. Install went ok.
I then installed W7 on a secondary disk, which didn't go through
I had to fight to fix my dual boot, then I finally reinstalled XPP (via the CD and the REPAIR feature). This removed my Photoshop product and all others by the way.
So, I reinstalled all my stuff, fine, until it was CS4 turn.
All attemps to install CS4 give a hang at 90% of the "Profile checking" phase.
The last lines of the log are never the same as far as the ERROR number is.
How come ???
This time, I have:
Property(S): ROOTDRIVE = C:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
=== Logging stopped: 17/06/2011  12:17:55 ===
1: 2 2: 0
1: 2 2: 1
Installation result: 0
[    2416] Fri Jun 17 12:17:55 2011 ERROR
Log of: object
isRunning {string}: 0
percentComplete {string}: 100
message {object}: [object Object]
Log of: object
    code {string}: 0
    args {object}: [object Object]
[    2416] Fri Jun 17 12:19:07 2011  INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Adobe support suggested to :
create a new account
remove Google desktop
remove Adobe Flash Player
"purchase" PC Scan & repair to fix error exwhyzee
Close my rear window
give milk to the cat
say hello to my neighbour
and
run in circles five times around my dining room table
None of these attemps give any result.
Any other idea, anyone ?
Thanks.

Similar Messages

  • Dreamweaver fatal error after photoshop cs4 install

    I have upgraded and installed photoshop cs4 today, now i have
    a problem with dreamweaver mx, whenever i try and insert an image
    to a html page, dreamweaver gets a fatal error and terminates. Any
    advice and assistance would be appreciated.

    Hi,
    I also faced the same problem and I simply reinstalled DW and
    it got resolved.
    Hope this also works with you.
    Cheers,

  • Error in CXD1 (EC-CS) during Validation Check

    Dear Team,
    While checking the Validation for Currency Translation Method QXCR in SAP, I am getting the below error message:
    80: Item 0000510001 and item 0000900000 are not the same type
    Message no. GZ218
    Diagnosis
    The item set contains both balance sheet and income statement items.
    It should however contain either balance sheet OR income statement items.
    System response
    Error message
    Procedure
    Please correct the item set.
    ==============================================================================================
    Further, under QXCR method entries, in sequence 80, under Maintain Sets I want to remove item 900000. When I go to change Set maintenance, the system gives me the below error for Set Name: 0-40R
    Objects with leading zero may not be changed
    Message no. GU302
    Diagnosis
    You have tried to change an object whose name starts with a zero.  This is not possible because these objects are reserved for SAP (for instance, examples used in training courses).
    System response
    The changes have not been made.
    Procedure
    Make the changes to a copy of the object or create a new object.
    Please assist on this...
    Thanks in Advance !!!

    Thanks Dan,
    I went to CXSC Tcode and given the existing FS item 0-40R and chosen the change option, wherein I am getting the error as below:
    Objects with leading zero may not be changed
    Message no. GU302
    Diagnosis
    You have tried to change an object whose name starts with a zero. This is not possible because these objects are reserved for SAP (for instance, examples used in training courses).
    System response
    The changes have not been made.
    Procedure
    Make the changes to a copy of the object or create a new object.

  • Cannot Install Lens Profile Downloader

    I'm trying to get user created profiles for my Sony cameras and lenses, as LR doesn't have very many built in.
    I need to install the profile downloader, which downloads as a ".air" file. I've uninstalled Adobe Air and reinstalled the latest version but when I try to install the "Adobe_Lens_Profile_Downloader_1_0_1.air" file I get the message:
    "Sorry, an error has occurred.
    This application cannot be installed because this installer has been misconfigured. Please contact the application author for assistance."
    Any ideas?
    I'm running a Mac on OX 10.7.5
    Thanks,
    Eli

    I saw that uninstalling the previous version (1.0) worked for others, but it has not worked for me. When I try to install version 1.0.1 I get the following error message:
    Sorry, an error has occurred.
    This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.
    I first installed the latest version of Adobe Air (v3.5). I then tried three different approaches to uninstall ALPD 1.0. First I dragged ALPD 1.0 to the Trash, rebooted the Mac, and then tried to install ALPD 1.0.1. Got the error message above.
    I reinstalled ALPD 1.0 from a backup disk, ran it to make sure it was working, then used AppZapper to delete the application, its cache, and its preferences. I rebooted the Mac, and then tried to install ALPD 1.0.1. Got the error message above.
    I reinstalled ALPD 1.0 from a backup disk, ran it to make sure it was working, then used AppDelete to delete the application, its cache, and its preferences. I rebooted the Mac, and then tried to install ALPD 1.0.1. Got the error message above.

  • Windows Connection Manager Profile Installer Has Stopped Working

    Hi all, I thank all who can help me with this problem beforehand and will do so after.
    I am an IT technician at a university in South Africa. I am trying to install a custom made VPN program that works perfectly on every other machine but not this one laptop.
    It is a Lenovo G580 laptop running Windows 7. Every time I try to install the VPN i get the error message that Microsoft Connection Manager Profile Installer has stopped working.
    I have made sure all the updates are installed.
    I have done disk check.
    I have done System File Check.
    I have done Windows Repair.
    I have coppied the cmstp.exe and ole32.dll files from one windows to the problem computer.
    I have taken permission of both the above mentioned files.
    I have done anti-virus scans and anti-malware scans.
    I have tested that other applications(not VPN's) install correctly.
    I have tested that the VPN installed correctly on other computers and pulled a new one to make sure the application was not corrupted.
    Error details:
    Description:
      Stopped working
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    cmstp.exe
      Application Version:    7.2.7601.17514
      Application Timestamp:    4ce7a860
      Fault Module Name:    ole32.dll
      Fault Module Version:    6.1.7601.17514
      Fault Module Timestamp:    4ce7c92c
      Exception Code:    c0000005
      Exception Offset:    00000000000284fb
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1078

    Hi,
    Generally speaking, this error can be caused by one or several of the below factors:
    a. The dll file is deleted accidentally from your system
    b. The dll file is damaged due to virus or spyware infection
    c. improper software removal
    d. The dll file was overwritten by an incompatible version.
    e. Outdated hardware drivers
    f. Too many invalid/obsolete registry entries.
    g. Related registry entries is corrupted.
    I would like to suggest you try the following steps to check the results:
    a. Do a system restore to undo recent system changes. If the error is just caused by the file getting corrupted or damaged, performing a system restore would help you to get a fresh copy back and also fix the related error well at the same time.
    b. Update the drivers for hardware devices and install any available Windows updates.
    c. Test in a new user account. If it works, please refer to Fix a corrupted user profile.
    Fix a corrupted user profile:
    http://windows.microsoft.com/en-US/windows7/fix-a-corrupted-user-profile
    If the individual troubleshooting advice above is unsuccessful, performing a startup repair or repair installation should restore all Windows DLL files to their working versions.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.  Tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!

    During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. 
    "An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'".  This is all followed by some more text and code HRESULT:0x80070005   
    Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
    Anne Marie

    Probably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)

  • CS4 Install Error - ... write privileges ... ???

    During the extraction of the upgrade version of CS4 (about 95-100% completed) I got the error "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder". I have 690GB free on a 750GB drive so I know space is not a problem. I'm running XP w SP3. Any ideas on how to resolve?

    But is there any limitation or quota on your temp directory? Please check C:\Documents and Settings\Rudy\Local Settings\Temp. Clean out the directory if necessary and attempt another install. Also check the status of system restore, updates and the trash can. It may be advisable to clean them out, too. Unfortunately Windows has some not so smart automatisms for all this stuff and chokes on itself, so to speak, under some circumstances. A good way to cover all those aspects is the use of CCcleaner, a freely available third-party tool.
    Mylenium

  • How to update Acrobat 9 to current version during CS4 install

    HI All:
    I have a corporate wide deployment of Creative Suite 4 and Acrobat 9 Professional.   Due to the security vulnerabilities of Acrobat Professional, we need to update Acrobat 9 to version 9.4 during the deployment.
    For Acrobat Pro 9 the procedure is to edit the setup.ini to include the patches you want to install.  see the following technote:  http://kb2.adobe.com/cps/507/cpsid_50757.html
    Basically update the setup.ini file
    [Product]
    msi=AcroPro.msi
    Languages=1033;1031;1036
    1033=English (United States)
    1031=German (Germany)
    1036=French (France)
    PATCH=AcroProStdUpd910_T1T2_incr.msp;AcrobatUpd912_all_incr.msp;AcrobatUpd913_all_incr.msp ;AcrobatUpd920_all_incr.msp;AcrobatUpd930_all_incr.msp;AcrobatUpd932_all_incr.msp;AcrobatU pd933_all_incr.msp;AcrobatUpd940_all_incr.msp
    I need to do the same thing with the CS4/Acrobat 9 install but there is no setup.ini file for this install.  I checked the setup.xml but can not find a way to do this.
    Does anyone have any information on how to do this?
    thank you,

    I have found that I can update CS4 Acrobat to the current version using a batch file.
    I have created the batch file calling Acrobat *.msp files and there was no other commands needed to run MSIEXEC.  I have tested it and it runs and starts the installer.  
    Contents of batch file:
    @ECHO OFF
    ::  Acrobat Professional 9.0 auto update for CS4
    ::  Updates Acrobat 9.0 Professional to Version 9.4.1
    ::  David Chamberlin
    ::  December 9, 2010
    ::  rev 3.0
    msiexec /p "[path]\AcroProStdUpd910_T1T2_incr.msp;[path]\AcrobatUpd912_all_incr.msp;[path]\AcrobatUp d913_all_incr.msp;[path]\AcrobatUpd920_all_incr.msp;[path]\AcrobatUpd930_all_incr.msp;[pat h]\AcrobatUpd932_all_incr.msp;[path]\AcrobatUpd933_all_incr.msp;[path]\AcrobatUpd940_all_i ncr.msp;[path]\AcrobatUpd941_all_incr.msp" REINSTALLMODE=omus REINSTALL=ALL /q

  • Can not Update icloud for win7 Sheep error during transformation. check that the indicated transmitter propagating path is valid. tryet in appel updater and tryet downloading from apple but the same

    Can not Update icloud for win7 Gets
    Sheep error during transformation. check that the indicated transmitter propagating path is valid.
    tryet in appel updater and tryet downloading from apple but the same

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • I may have totally screwed myself but...after installing Yosemite without checking first, my CS4 Design Premium suite wouldn't open. So I deinstalled it, but I only have disks for my old CS3. When I got the CS4 upgrade I downloaded it. What can I do??

    I may have totally screwed myself but...after installing Yosemite without checking for potential problems with Adobe software, my CS4 Design Premium suite wouldn't open. So after consulting some forums, I deinstalled it, but I only have disks for my old CS3. When I got the CS4 upgrade I downloaded it, back in 2011... What can I do?? Everything was fine before I upgraded that *#$%* Yosemite.

    You can find the CS4 download here: https://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
    Benjamin

  • Error occurred during budget check

    Good Morning PS Gurus<
    We are unable to increase the quantity of the matearil
    in project & save. It’s throwing error
      Error occurred during budget check, see cost protocal
      Message Number :IW172
      Diagnosis:
      An error occurred during budget availabilty check
      Procudure:
      Display the cost determination log for the order or network plan for more detailed information.
       We do’t have budget in our project. I checked budget TL ( it said warning message:1)
    Please throw light on this issue.
    Thanks
    PY

    Hello Team,
    When i select the network-activityà extrasà logsà cost calculation.  
    It said WBS <<PRO1234> do't exist CJ021
    Please help.
    Thanks
    PY

  • Adhoc Query : Error during selection; check the selection conditions

    Hi
    We have a report set-up and which we want to run using our adhoc query report tcode S_PH0_48000513
    The report, has a few different selection criteria in it to look at all action IT screen data in the system for ee's in specific personnel areas. There is also a criteria to allow us to paste in specific employee numbers we are interested in. The issue I am facing is that over about 3000 ids, the system automatically returns me a message when I click on the Output button to run the report which states:
    Error during selection; check the selection conditions
    Message no. PAIS206
    I am not sure why this is happening. The selection criteria are fine and the other day I ran the report and I experienced no issues. The report ran successfully. Now though, if I try and paste in all the ids I am interested in (about 8000) I get this message straightaway.
    Can anything be done to overcome this issue?
    Any advice would be much appreciated.
    Nicola

    Hi
    The message in full is:
    Error during selection; check the selection conditions
    Message no. PAIS206
    Diagnosis
    A runtime error occurred during dynamic selection.
    System response
    The runtime error will be caught; no short dump will be created. This error should not occur as a rule. However, very large select statements may trigger the runtime error SAPSQL_STMNT_TOO_LARGE or DBIF_RSQL_INVALID_RSQL. There is no way to prevent this happening. In this case, the error can only be caught.
    Procedure
    Check the selection conditions to see whether the error was caused because the option "Import from text file" included too many objects in the "Multiple selection" dialog. If this is so, you must limit the number of individual values.

  • "Unable to check out" error message in CS4

    I have InDesign CS4, but do not have InCopy. When I exported an InDesign CS4 file to CS3 interchange format, and then tried to edit the orginal file, I got an error message saying: "Unable to check out this file. It may be in use by someone else." From reading the documentation, it appears that I inadvertently engaged a feature of InCopy, but when  I go to the Edit->InCopy menu, the option to check the file back in is greyed out. How do I check the file back in so that I can edit it?

    I've just experienced the same error message in CS4. I got rid of it by going to the Links panel, selecting all the links to Incopy, and Unlinking.

  • Error occured during budget check while planning in network activity

    Dear All,
    i have created a project with 4 WBSE. i have assigned budget to one of these WBSE and released that project. than i want to do planning in next WBSE this is giving error while saving this planning as Error occured during budget check, see cost.
    i have created user status for budgeting like if we have not budgeted than WBS is not able to release. i have added availability control as Forbidden while not budgeted but this not effective.
    please suggest me some thing to remove this problem
    thanks
    Sunil

    hi,
    In WBS you can Plan and budget to group WBS , the below wbs will consume budget form top.
    Proj>WBS1(Group WBS- Plan/Budget) it is applicable for below all wbs elements say WBS2>WBS3
    When you are determining Hierarchy you should create WBS in same levels then only you can allocate Budget.
    If you wan to allocate budget for WBS2 and WBS3 separately.
    Proj
    WBS1
    WBS2                    WBS3
         WBS2A                   WBS3A
              WBS2B                    WBS3B
                   WBS2C                         WBS3C
    Proj>WBS1 (it will no more act as Group wbs element) then  you can directly plan and budget for below wbs elements WBS2 and WBS3.
    Below hierarchy will consume budget from as displayed above.
    Note: In you case as per my understanding return budget make zero, then plan and budget the same it will work.
    Thanks and regards
    Sadiq

  • IW172 : Error occured during Budget Check see Cost Protocol

    Hello Guru's
    While creating Capital Reservation in the Network i am getting the error " IW172 : Error occured during Budget Check see Cost Protocol" In making reservation we don't book any cost in the reservation.The Resv  is charged by making SR.The amount is still available against the WBS Element.Please suggest what needs to be done.
    From
    Aashutosh

    Check whether the following note helps you:-
    Note 551677 - Process order: Availability control against WBS element
    G. Lakshmipathi

Maybe you are looking for

  • How can I get the Menu Bar in P/S Ele. 9 to show in the organizer?

    The Menu bar IS in Edit.  Problem occured when I updated from XP to new computer w/ Windows 7.  There is a small rectangle where the menu bar usually is.  I can click on it and the menu bar opens vertically.  The rectangle can not be seen unless you

  • HP 4050 Printer no longer working

    not sure if its related but since I've updated the software release on both 10.6.4 on the macbook and airport extreme, the printer is no longer working and has dissapeared from the airport extreme usb summary. I've changed the Parallel to US cable, t

  • Content Server UCM 11.1.1.6

    Anyways, I activated the folder_g in UCM 11.1.1.6 and now able to see the Contribution Folder in Jdev content repository connection as well as able to see the my created folder and file in Services ----> Content Tab I click Administration link of my

  • How to fill an empty cell with the value above

    Hello, Please help me on the following issue related to BEx query and it's output in BEx analyzer as well as on Web. I am trying to modify a query output where the empty cells are to be filled with the value in the above cell. e.g. there is a column

  • Bookmarks sidebar - open in new tab

    Hi I actually prefer to use the bookmarks sidebar rather than the favourites bar on the top when using a panoramic display, which is most of the time. But there seems to be no way to open a link in a new tab by holding the CMD key while clicking. Am