Error 2500 burning cd's

i don't know what happened. my itunes was burning cd's fine last week. now i'm trying to finish backing my music up onto cd's and it all of a sudden says software not recognized. an alert pops up that says i have inserted a blank disc, but when i click burn disc it will not work. please help!
Video Driver: Intel(R) 82810 Graphics Controller (Microsoft Corporation)\Intel(R) 82810 Graphics Controller
IDE\DiskWDCWD307AA-00BAA0_____________________10.09K11, Bus Type ATA, Bus Address [0,0]
IDE\CdRomMITSUMICR-4804TE_______________________2.6C___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomSAMSUNGCD-ROM_SC-148___________________FT06___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
Failed while scanning for CD / DVD drives, error 2500.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

i believe it is a 64-bit...this is everything that pops up when i run diagnostics...maybe i'm not doing something right?
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
00101680 7840 15293900050521
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: Intel(R) 82810 Graphics Controller (Microsoft Corporation)\Intel(R) 82810 Graphics Controller
IDE\DiskWDCWD307AA-00BAA0_____________________10.09K11, Bus Type ATA, Bus Address [0,0]
IDE\CdRomMITSUMICR-4804TE_______________________2.6C___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomSAMSUNGCD-ROM_SC-148___________________FT06___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
Failed while scanning for CD / DVD drives, error 2500.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Failed while scanning for CD / DVD drives, error 2500.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: MITSUMI CR-4804TE on CDR media at speed 4X.

Similar Messages

Unable to burn cds. Have run diognostics. i tunes not running in safe mode. invalid lower filters registry value. Failed while scanning for CD/DVD drives, error 2500. Please help.

Unable to burn CDs using i tunes. Have run diognostics.    Summary:-   i tunes not running in safe mode.
                                                                                                                                    Invalid lower filters registry value.
                                                                                                                                    Failed while scanning for CD/DVD drives, error 2500
Please help.

That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Error -2500 while writing new channel groups / channels to tdm-file

I'm creating a tdm-file using the express vis provided by LabView. Everything goes fine in opening the file and setting the file parameters.
When i'm using the write data-express vi to create a new channel group and setting it's parameters i receive an "error -2500" accompanied with the call chain of the vi.
I'm setting the parameters by using a terminal on the express vi and by using the value setting in the express vi configuration. Any ideas what might cause this error?

I solved it. I made the error to begine some of the properties names with a number, eg. 1s for 1 sigma. I renamed them to sigma_1s and it works.

HELP! OOstatus error=- 47, ERROR WHEN BURNING

I am getting an error that states "osstatus error = -47" when I try to burn a disc, does anyone know the workaround for this??
I am using 2ghz intel core 2 duo macbook
thanks in advance!

dicktatorsmith
We first need to determine what program is involved and the details of what you are doing?
You cannot burn your content to DVD disc (assumed DVD-VIDEO on DVD disc) with just Photoshop Elements and its associated Elements Organizer? So, if you are getting this error in your burn to disc, I am suspecting that you are not working with Photoshop Elements.
So, what program and version of it are you working with and on what computer operating system is it running?
The error that you present at burn has been seen before with no one description of what it means (that I have ever seen). Sometimes defragmentation of the computer hard drive and/or using another brand/type DVD disc resolves the issue. If you are in Premiere Elements burn dialog, does hitting the Rescan button a few times have any impact on the situation?
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
Please review, consider, and then let us know the outcome.
Thank you.
ATR

Labview error 2500

Hello all,
I am trying to read a channel from a TDM file and send the data continuously over an analog port. This seems to function when I have only one analog output but when i try to use two channels, it shows an error 2500. This error is not part of the documentation and the exact message at my end is:
Invoke Node in _saveFloat64Channel.vi-
I am using Labview 8.0 with DAQ 8.3.1. The hardware in question is the NI USB 6251.
Please advise.
Regards,
Shailesh.

Things you can improve,
1. Start the AI task probably just before you start the AO task, else if the read from file and genration takes time, you may get buffer overflow error.
2. Change the AO write to N Channel>>Multiple Samples>> 2D Double/ 1D Waveform depending on whether u are using Double or waveform data type.
3. The error that you mentioned in the first post is most likely to come from the TDM write inside the while loop. There may be other errors, but you may be getting only the first one. So it will be a good idea to put a probe on all the three error wires inside the while loop and se if you are getting in in them or not.
4. Inside the while loop after AI Read, the DBL conversion is not required. You can remove it.
5. I am not very sure what you are trying to do in the file read part?You can use array of DBL only if the number of elements that you read from the file and the number of elements from the lookup table are same. Else it is better to use waveform.
Can you try these things and let me know?
"A VI inside a Class is worth hundreds in the bush"
യവന്‍ പുലിയാണു കേട്ടാ!!!

Power calibration error when burning?

I get a power calibration error when burning from IDVD.
Any suggestions as to how to fix it?

Basically a power calibration is the drive writes to the blank and then tries to read it back and adjusts the laser power accordingly to get a proper burn. So there are a number of reasons you might get this problem.
One is the media itself. A bad disc or poor quality media might give you this error.
Next, you may have a dirty laser and running on of those cleaning CDs (they have little brushes on them to dust off the laser) might do the trick.
Third, could be a laser on the drive is giving up the ghost. Hopefully it is not the last one.
Patrick

Unknown error when burning disc

I get an unknown error when burning playlists to blank discs. My computer begins to write the discs, but stops after a song or two.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Memory allocation error when burning in premiere elements 2

I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erika

memory allocation error when burning in premiere elements 2
Erika Lindsay - 09:30am Jan 4, 2009 Pacific
I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erika

Errors while burning?

I just put together a pretty simple, one-track video on iDVD and while it was burning, I got a message saying something like "errors while burning" - I did not save the exact message, but I'm wondering what the cause for this might be. I actually closed out of the DVD project, took it to the trash, and recreated a new DVD project out of the iMovie project. I thught this would fix the problem, but there were still errors while burning the second time. I tried to play the DVD and the system would not read the DVD, there was no picture at all. Any suggestions? (I have more then 25GB of free space on my hard drive - about 35 I believe)

You're welcome. Here's a bit of background:
a) I use MacJanitor to trigger the Mac's maintenance scripts (download it from VersionTracker.com), and then use Apple's Disk Utility (look in Applications-Utilities) to repair permissions on your main hard drive. Your Mac would do maintenance tasks by itself if it was turned on continuously, but MacJanitor lets you run daily, weekly, and monthly maintenance tasks (I run it before I do something big, or when my Mac seems slow or goofy). Disk Utility can do first aid on hard disks, and on your main hard drive (boot drive), it can Repair Permissions (It's important that permissions are correct).
b) Creating an image file is often recommended in these forums because it gives you more control over the burning process, and it creates a virtual DVD that reliably can be tested. In iDVD, choose Save As Disc Image and iDVD will go through the encoding and other processes, except the DVD is created on your Desktop. You can use Apple's DVD Player to play the virtual DVD and make sure it works like you want. When you're satisfied, Disk Utility can be used to copy the virtual DVD to an actual disk. To do this, choose the image file in DU and click Burn (you'll have some options for burn speed -- I'd choose something slow to reduce burning errors -- perhaps 1x or 2x but wouldn't go faster than half the rated speed of the burner).
Shout if you need clarification.
John

Multiplex Error - While Burning Disc Image

I've been trying to burn an hour and a half dvd using idvd '08 on professional quality, coming from and AIC HDV project in final cut express 3.5. It takes around 5 hours to encode and then for the third time it's given me a multiplexer error at the end. Is there anyway to solve this?
Thanks,
Mike

Do you have 20GB+ free on your start-up drive? Do you have any external HDs attached?
Your MacBook Pro hasn't frozen up while encoding?
There is 10.5.2 available today.

Error while burning a movie to DVD using iDVD

I have burned a 2 other movies this week but the last movie I tried to burn didn't work. I tried 3 times (once after restarting the computer and once starting over from iMovie) but each time I got the same error at the end.
Multiplexer Error
The was an error during building. The discs is still untouched and may be reused later.
Thanks for any help.

I had that problem until I remove a good deal of stuff from my 500 GB drive and left about 100. I hear from this forum you need at least 25 GB free. Try it...see if that works....also, burn at the slowest speed possible.

Error -2500 Internal storage VI error

Hello,
I am trying to continuously stream data from seven channels from my NI USB-6211 DAQ card. At the same time I am generating a continuous sine wave and write it to one of my analogue outputs on the same card.
I’d like to stream the data generated and measured continuously and simultaneously to a file. I have chosen TDMS as this seems to be most appropriate for the application.
The problem I am having is that available samples per channel gives me back 0 when I am not in highlight execution. I tried to overcome this by setting the samples to read input at the DAQmx Read VI to -1 and have a wait function to not read too often but this didn’t help. Furthermore, I installed TDMS 2.0 without any success. The error I am getting is -2500 and it says "Internal storage VI error". Does anyone have an idea what I am doing wrong?
Also, it would help quite a lot if I could have a time axis for the analogue output and one for the analogue input group so I can look at the time delays introduced by my circuit. Does anybody know how to do this, so I have a time stamp for each sample like in the express VI? Or any other way to find the relationship between the data of the two groups when sampling is carried out at different rates?
Thank you very much for your help,
Sophie
Attachments:
sync data.JPG ‏135 KB

Ok, so I wasn't sure what you ment exactly. I have tried to do the same with just the TDMS VIs. It seems to be working fine. I don't get any errors and the TDMS file seems complete too.
I had the feeling DAQmx Read (just the one in the upper loop) gives the error as it doesn't seem to detect any samples to read. Which would also explain why I don't get the error in highlight execution, because then there are samples to read. This is why I added the wait VI in the loop and made it 3s hoping this will allow some samples to be collected in the buffer but there just don't seem to be any samples.
I have attached an image of the TDMS VI I just tried out, I can add more things if you have any ideas...
Attachments:
tdms.JPG ‏58 KB

Error Message Burning photo's on to CD

I am a new user of Apple Macs and I'm still learning how to use everything. I have my photo's on my computer saved in iPhoto '05, I have been editing away for the last few months now I want to back them up and also put them on CD for other people who do not use Apple.
In the past I have not had a problem putting them on to CD except when I view the photo's on another computer there are several duplicates of the same photo for some reason even though I did not do this?
The other day I tried to put several of my holiday photo's on to CD, using the same brand and type (CD-R 700MB). I filled the disk and had to take a few off as the disk was full. No problem. Started to burn the CD as normal it started writing the images, but when it finished it came up Burning Failed Error Message.
I took the CD and put it in my laptop which is not an apple. It did not read any images on the CD but loads of different folders with dates were created on it. I then put it into my imac but it didn't even recognise the disk was in.
So I de-selected a few more photo's in iPhoto to half fill the disk and tried again. The same message came up. Put it in my laptop again, this time it read the images but they only came up as thumbnails and they were really dark. Once again loads of folders were created with dates and each photo from my library was put in the corresponding folder on the particular day it was taken, even though I never asked it to do this.
I put the CD back into my iMac and once it again it did not read the disk?
Can anyone help me? I was supposed to put all my holiday photo's on CD for my friend by this weekend. Am I doing something wrong in iPhoto or is there something up with my computer?
Thanks.
Imac G5 (2.1GHz) Mac OS X (10.4.6)

Just did a Google search and found this rather old discussion concerning that error code.
Seems to be a problem either with the SuperDrive or the media used.
Have you tried burming another brand of media? WIth the same results?
Clinton

Error when burning disc image

An error occurred when I tried to burn a disc image of a DVD slideshow. The slideshow has 324 slides in it and is almost 38 minutes long at the moment. I have added sound by creating a sound track in iMovie using a combination of songs downloaded from iTunes and tracks from my own CDs then blending the two blending the two. The slideshow plays on the computer and I have burned a disc image two or three times as I was creating it.
Any advice?

I have burned a disc image two or three times as I was creating it.
Can you clarify what you did exactly? You mean you saved the project as a disk image, then went back and did further work on the project?
The audio tracks you imported from iTunes may have been copy protected and will not burn in iDVD. The workaround is to burn those tracks to an audio CD in iTunes, then re-import into iTunes from that CD. Then will transfer to iMovie and iDVD without problems.
Also, something here may help:
iDVD: Slideshow error while rendering or encoding
http://support.apple.com/kb/TS2303

Getting medium write error on burning a disc image using Disk utility

Have a MacBrook Pro 15 inch, circa Summer 2007, using OX 10.4.11. up until recently (as in before February) have been able to burn DVD's using Toast (message Medium Writer Error). Started getting problems where the burn failed. Thought maybe it was Toast, so I tried creating an iDVD project and tried to burn the DVD using that, and it stopped in the middle as well and then spit the disk out with no error message.
, this time I tried creating a disc image, and used disk utility to burn. The process looked like it was going to work but then failed with a message that I have a medium write error.
I have no problems burning a regular data disk on my superdrive so I am thinking it's maybe a software glitch rather than hardware. . Any thoughts, as to what could be causing this problem all of a sudden. By the way, there are other users out there, who seems to be having DVD burning problems all of a sudden, but most people suggest other media. I am using the same stack of DVD-R's from before when I had no problem.

Well, I had assumed my media was ok, since I had a spindle of DVD-R's and had used many of them successfully (until now!, ha ha).
I went out this afternoon and bought another brand (Memorex) and it successfully recorded.
So hopefully this solves my problem, I had no idea it was the media since I had used several of them before.
Thanks for your help.

Error 2500 burning cd's

Similar Messages

Maybe you are looking for