Error -2500 Internal storage VI error

Hello,
I am trying to continuously stream data from seven channels from my NI USB-6211 DAQ card. At the same time I am generating a continuous sine wave and write it to one of my analogue outputs on the same card.
I’d like to stream the data generated and measured continuously and simultaneously to a file. I have chosen TDMS as this seems to be most appropriate for the application.
The problem I am having is that available samples per channel gives me back 0 when I am not in highlight execution. I tried to overcome this by setting the samples to read input at the DAQmx Read VI to -1 and have a wait function to not read too often but this didn’t help. Furthermore, I installed TDMS 2.0 without any success. The error I am getting is -2500 and it says "Internal storage VI error". Does anyone have an idea what I am doing wrong?
Also, it would help quite a lot if I could have a time axis for the analogue output and one for the analogue input group so I can look at the time delays introduced by my circuit. Does anybody know how to do this, so I have a time stamp for each sample like in the express VI? Or any other way to find the relationship between the data of the two groups when sampling is carried out at different rates?
Thank you very much for your help,
Sophie
Attachments:
sync data.JPG ‏135 KB

Ok, so I wasn't sure what you ment exactly. I have tried to do the same with just the TDMS VIs. It seems to be working fine. I don't get any errors and the TDMS file seems complete too.
I had the feeling DAQmx Read (just the one in the upper loop) gives the error as it doesn't seem to detect any samples to read. Which would also explain why I don't get the error in highlight execution, because then there are samples to read. This is why I added the wait VI in the loop and made it 3s hoping this will allow some samples to be collected in the buffer but there just don't seem to be any samples.
I have attached an image of the TDMS VI I just tried out, I can add more things if you have any ideas...
Attachments:
tdms.JPG ‏58 KB

Similar Messages

Internal Storage VI error

I am acquiring multiple channels at 5KHz (continuous) and down-sampling some of them to then store using the storage VIs. There is also some online signal processing (i.e. FFT) and visualization. On the block diagram I open a file using the event structure on a button press and then my acquisition loop includes the Write Data subVI. But it seems the overall speed of the VI slows down considerably when recording starts and even seems to fall behind acquisition speed (graphs show changes in waveform later than when they actualy happened). I then get an error that shows up periodicaly at the storage VI that says "Error -2500: Internal storage VI error" and thats all the info I get. When that error happens I think I also loose some data evident from warnings I get on my filters that notify me the data has lost continuity. Something is wrong but I can't figure out what. HELP anyone? Thanks.

No, I am not opening and closing inside the loop. I open the file outside the loop via en event using "Open Data Storage" VI, and then I am using the "Write Data" VI (TDM format, writes 2 files, one XML and one binary if I understand correctly the format). The Write Data is used inside an acquisition loop that collects 7 (or 9) channels at 5KHz (500 samples per loop, so 0.1sec of data per loop) but then resamples two of these channels down to 400Hz and 50Hz respectively, the rest stay at 5KHz. So yes, I am streaming the data and I assume it writes it in blocks on each loop (not byte at a time).
Does this help clarify?

What is After Effects error: AGM internal: TOffsetObjIntrnl planarizer error?

I just ran into this error for the first time, a google search couldn't find anything about it. Running AE CC 2014.
After Effects error: AGM internal: TOffsetObjIntrnl planarizer error ( 83 :: 2 )
All my main comps are messed up and look nothing like they did a few minutes ago.
More importantly, how can I fix it/prevent it from happening again?
Best,
David.

It is a dense project,using a bunch of 5K RED files. No crazy plug-ins (and nothing I don't use ALL the time). I found out the one specific layer that when I turn it off the error stops. That layer has no effects except an exposure adjustment. I'm using After Effects CC 2014 (see specs below)

"Internal Job Server error" in Event Viewer

Hi
We are running Crystal Reports Server XI R2 SP2 (11.5.8.826). We have numerous jobs scheduled to run during the day. Each time one of these jobs is scheduled, the Windows Event Viewer returns the error message:
"Internal Job Server error."
The error is now being produced over 100 times per day, and has caused the disk to run out of space - and stopped the system working all together.
We currently have the "-trace" command set on the startup script of the Crystal Reports Job Server - this was recommended by BO to find the cause of an earlier error.
Has anyone experienced this error before? Should we have the "-trace" command set on the server, or is this producing unneccessary error messages?
Thanks all
James

Hello,
If you already have the "-trace" command enabled on the CrystalReport Job server then I would recommend that you go to the logging directory under the folder that you installed Business Objects.
In the logging folder you should see some JobserverChild log files. Start reviewing those files for information as to any failed scheduled reports. Try and isolate the time in which the problem occurs to the time associated to the log files. I would recommend if your system is going down and you are having difficulties reviewing the log files then you may want to create a case in Service Market Place and attach the log files to the case. I hope that helps.
Jorge

Internal Job Server error

Hi All,
Have you ever come across the error in Event Logs?
Source:BusinessObjects_JobServerFullClient
Event Id: 45385
Category : Scheduling
Type:Error
Description:Internal Job Server error.
Could any one please let me know the reason for the error and how it could be solved.
Thanks in Advance
Sunil

Hi,
Thank you for your reply......
We are using BOXI version with releace 2, we are able to schedule the report and all report are running successfully.
But still the error is displaying in event log and we are not enble -trace in any of the application server.
Regards
Sunil.

Totem + GStreamer + srt subtitle : Internal data flow error

Hello all,
I am trying to watch a video with a subtitle in "srt" format, with Totem + GStreamer.
I get a popup with the error message : "Internal data flow error" and my video cannot play.
If I remove the subtitle file, I have no problem watching the video. I do not have this problem with totem + xine, but I want to use gstreamer ...
I have posted a bug report at Gnome.
Do you have the same issue ?
Can any body help ?
Thank you very much
Cheers,
Chicha
Last edited by chicha (2007-10-05 15:16:52)

Thank you Don-DiZzLe for your help
I have tried with totem-xine and it worked. But there is something annoying with totem-xine : you cannot change the subtitle font size
That is why I tried totem-gstreamer and found this bug.
This is supposed to work according to GStreamer's website, so if I could help fixe this I would be very happy

My lap top wont import pictures from auto play. it keeps saying there is a file error and a device connected to the computer isnt working properly. i have tried going into the internal storage to copy and paste the pictures but this wont work either.

my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

(500) Internal Server Error when create storage table use development account

Yesterday, our team suddenly cannot use storage emulator all, it always said 'can not create database' when start the emulator. Finally, we found a issue may affect this, we delete the WAStorageEmulatorDb30.mdf file in C:\Users\[User], and create manully
in localdb, and so we can start the storage emulator later.
But we still can not use it, since it always throw exception when creating Tables/Blobs/Queues, the exception like this:
Microsoft.WindowsAzure.Storage.StorageException was caught
HResult=-2146233088
Message=The remote server returned an error: (500) Internal Server Error.
Source=Microsoft.WindowsAzure.Storage
StackTrace:
at Microsoft.WindowsAzure.Storage.Core.Executor.Executor.ExecuteSync[T](RESTCommand`1 cmd, IRetryPolicy policy, OperationContext operationContext)
at Microsoft.WindowsAzure.Storage.Table.TableOperation.Execute(CloudTableClient client, CloudTable table, TableRequestOptions requestOptions, OperationContext operationContext)
at Microsoft.WindowsAzure.Storage.Table.CloudTable.Exists(Boolean primaryOnly, TableRequestOptions requestOptions, OperationContext operationContext)
at Microsoft.WindowsAzure.Storage.Table.CloudTable.CreateIfNotExists(TableRequestOptions requestOptions, OperationContext operationContext)
at WorkerRole1.TableService..ctor() in c:\Users\<user>\Documents\Visual Studio 2013\Projects\WindowsAzure8\WorkerRole1\TableService.cs:line 21
InnerException: System.Net.WebException
HResult=-2146233079
Message=The remote server returned an error: (500) Internal Server Error.
Source=System
StackTrace:
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.WindowsAzure.Storage.Core.Executor.Executor.ExecuteSync[T](RESTCommand`1 cmd, IRetryPolicy policy, OperationContext operationContext)
InnerException:
And if we visit this url: http://127.0.0.1:10002/devstoreaccount1, it said Internal Error:
<error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<code>InternalError</code>
<message xml:lang="en-US">
Server encountered an internal error. Please try again after some time. RequestId:e9637e04-76ad-4237-8df0-31a511e4c116 Time:2014-04-25T00:56:16.9990136Z
</message>
</error>
Any ideas of this? We still don't know what caused this whole trouble from yesterday, is it possible affect the storage emulator just by code? We were coding, not configuring anything. Strange.

I have tried it before, but not works.
Finally, I solved this issue by delete LocalDB instance, uninstall storage emulator and install LocalDB instance / storage emulator again, it works now. Quite strange.

Internal Storage And Camera Error

Hello I'm having problem my internal storage is 3gig out of 11g. I'm looking for the files were it's eating up my storage and delete it or move it to SD card, but I can't find it.
Camera Error everytime I take video's I get the error when the recorded videos go to my SD card. So all the time I got from Internal then just transfer it and I lost some of my pictures...

Please do not use such large fonts when writing.So you cannot find files that are using your memory?Do you have a file explorer(androzip,es explorer) for your android so you can look for files?
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Errors in OLAP storage engine

I am running BPC MS 7.5 and tried to do a full optimization and got the error below.
Unfortunately it did not appear to put the data back to its original state and I had to restore to a back up!
Can anyone tell me how to resolve this error - I am not a techie more an application man so in "English" would help me.
==============[System Error Tracing]==============
[System Name] : OLAPServerHandler
[Message Type] : ErrorMessage
[Job Name]     : Olap9Manager : CubeProcess
[DateTime]     : 6/22/2011 11:45:32 AM
[UserId]       :
[Exception]
    DetailMsg : {Microsoft.AnalysisServices.OperationException: Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'dbo_tblFactConsolidation', Column: 'ACCOUNT', Value: 'CTLICBFR010'. The attribute is 'Account_ID1'.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while processing the 'Consolidation' partition of the 'Consolidation' measure group for the 'Consolidation' cube from the EBIQUITYTRAIN database.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Internal error: The operation terminated unsuccessfully.
Server: The operation has been cancelled.
Thanks

Hi,
Usually, this kind of error message comes from invalid records in your fact tables.
Check out SAP Note 1098683.
Hope this will help you.
Kind Regards,
Patrick

Internal server 500 Error

We are using OC4J 9.0.4 version. I deployed an application and the problem is we get "Internal server 500" error intermittently. The application runs fine usually but it does not run on few occasions. Any ideas?

Hi,
There could be many reasons.
Check
the permission levels of Containers are set properly.
Try creating the containers manually and run the app, so you can distinguish what goes wrong
Check the URL, storage key, SHA if using it
If you found this post useful, Please "Mark as Answer" or "Vote
as Helpful". Best Regards.

No roll storage space error in webi

Hi,
I am using SAP BW query in webi. while running the report i am getting the following error.
"Error in MDDATASetBW.GetCELLData. No roll storagespace of length 1293328 available for internal storage. table blocks..(WIS10901)"
I searched in sdn. but unable to find solution for this problem. can anyone provide solution for this..
Regards,
Shanthakumar.

Hi,
Try with below steps. or check SAP Note 1369738 - Error in MDDataSetBW.GetCellData (WIS 10901) when refreshing WebI report using SAP BEx query.
Restrict query results to a smaller set of data.
Suppress the 'Not assigned/#' Hierarchy node (Exclude Selection) in the BEx hierarchy query. This reduces the size of I-Table & buffer requirements.
Avoid use of 'default values' for hierarchy & hierarchy node variables. Or, if a default must be assigned, set it to an attribute that has 0 levels.
Implement : Enhancement Pack 1 + Support Package 3 (or above) for optimized interoperability between BusinessObjects & SAP modules.
Thanks,
Amit

Error 500--Internal Server Error while opening a taskflow in inline popup

Hi,
I am getting "Error 500--Internal Server Error" while opening a bounded taskflow as a popup from another bounded taskflow containing page fragments. The popup taskflow contains jspx pages. I even removed the jspx pages from the popup taskflow to check if the error is resulting from the bindings on the pages but still I get the same error. The entire stack trace of the error in the popup dialog is :
Error 500--Internal Server Error
oracle.adf.controller.ControllerException: ADFC-04008: The BindingContext on the session is null.
     at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
     at oracle.adfinternal.controller.util.model.AdfmUtil.getBindingContext(AdfmUtil.java:47)
     at oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
     at oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:1006)
     at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:159)
     at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:900)
     at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:355)
     at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:105)
     at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
     at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any help is greatly appreciated.
Thanks,
KK

Hi Frank,
Thanks for the reply. I am using it as an inline popup. I am trying to create command links dynamically in an iterator. When a link is clicked a popup window opens. The text of the link is passed to the popup window by creating a variable in the session scope ( I even tried request scope) by an action listener in the backing bean.
I tried to create another simple application with a static command button which passes its text to popup window through a session scope variable. It worked fine. I am not sure why the same procedure is not working in my original application. Can you give me a hint what could possibly go wrong according the exception stack trace ?
Thanks,
KK

Error 0000: internal error with Apply Transform Module

Hello:
I get an internal error message when attempting to use a previously saved data transform (namely missing value processing using MICE). What is strange is that using the previously saved model works if I feed the exact same data that was used for training
it but generates an internal error whenever I use a sample - even a 90% sample of the original. This is the output log:
Record Starts at UTC 04/02/2015 10:30:53:
Run the job:"/dll "Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule;ApplyITransform" /Output0 "..\..\Transformed dataset\Transformed dataset.dataset" /transform "..\..\Transformation\Transformation.itransform" /data "..\..\Dataset\Dataset.dataset" "
Starting Process 'C:\Resources\directory\870595a63cd0452da2f3767b831099d7.SingleNodeRuntimeCompute.Packages\AFx\6.2\DllModuleHost.exe' with arguments ' /dll "Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule;ApplyITransform" /Output0 "..\..\Transformed dataset\Transformed dataset.dataset" /transform "..\..\Transformation\Transformation.itransform" /data "..\..\Dataset\Dataset.dataset" '
[ModuleOutput] DllModuleHost Start: 1 : Program::Main
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleDescriptionParser::ParseModuleDescriptionString
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Start: 1 : DllModuleMethod::DllModuleMethod
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Start: 1 : DllModuleMethod::Execute
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleBinder::BindModuleMethod
[ModuleOutput] DllModuleHost Verbose: 1 : moduleMethodDescription Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule;ApplyITransform
[ModuleOutput] DllModuleHost Verbose: 1 : assemblyFullName Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleBinder::LoadModuleAssembly
[ModuleOutput] DllModuleHost Verbose: 1 : Trying to resolve assembly : Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Verbose: 1 : Loaded moduleAssembly Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Verbose: 1 : moduleTypeName Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule
[ModuleOutput] DllModuleHost Verbose: 1 : moduleMethodName ApplyITransform
[ModuleOutput] DllModuleHost Information: 1 : Module FriendlyName : Apply Transformation
[ModuleOutput] DllModuleHost Information: 1 : Module Release Status : Release
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Start: 1 : ParameterArgumentBinder::InitializeParameterValues
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos count = 2
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos[0] name = transform , type = Microsoft.Analytics.MachineLearning.ITransform`2[Microsoft.Numerics.Data.Local.DataTable,Microsoft.Numerics.Data.Local.DataTable]
[ModuleOutput] DllModuleHost Start: 1 : DotNetSerializationHandler::HandleArgumentString
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos[1] name = data , type = Microsoft.Numerics.Data.Local.DataTable
[ModuleOutput] DllModuleHost Start: 1 : DataTableDatasetHandler::HandleArgumentString
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Verbose: 1 : Begin invoking method ApplyITransform ...
[ModuleOutput] InputDataStructure
[ModuleOutput]
[ModuleOutput] {
[ModuleOutput] "InputName":Dataset
[ModuleOutput] "Rows":385338
[ModuleOutput] "Cols":105
[ModuleOutput] "ColumnTypes":System.Nullable`1[System.Double],99,System.Nullable`1[System.Int32],5,System.String,1
[ModuleOutput] }
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: Source array was not long enough. Check srcIndex and length, and the array's lower bounds.
Module finished after a runtime of 00:00:27.6131405 with exit code -2
Module failed due to negative exit code of -2
Record Ends at UTC 04/02/2015 10:31:38.
Experiment URL:
https://studio.azureml.net/Home/ViewWorkspace/ffac4490b5e448fa8778ceadc74a0b97?#Workspaces/Experiments/Experiment/ffac4490b5e448fa8778ceadc74a0b97.f-id.0c2caa16ad4b46b08449bcfaf4a71e57/ViewExperiment
Thanks for your help

It's pretty clear no-one at Microsoft is interested in answering this on this forum. With a paid subscription plan would I be able to get a response for these types of incidents/follow up questions? You know - so I can stop throwing money away
running experiments with modules that haven't been fixed in almost a month in hope that magically they will start to work some day...

Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE

Hi All,
I am getting Error when i am viewing my salary slip in ESS.
The Error i am getting is :
Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE
So can anybody help me out in this.
Regards,
Dhruv Shah

Solved the Error by deleting the spool in the Backend.
Spool was overflow.
Regards,
Dhruv Shah

Error -2500 Internal storage VI error

Similar Messages

Maybe you are looking for