Error 25009. Invalid object mms_management-agent hr=0x80230406
Hi There,
While upgrading FIM 2010 to 2010 R2 SP1, we have encountered an Error 25009. Invalid object mms_management-agent <hr=0x80230406>. Have tried all the articles but the this is not with permissions. Since I am trying on test environment, we have given
more than necessary permissions.
Please help.
Oh!! This took me 1 full day to figure out.
Unable to start FIM sync service.
I was looking through the event viewer and noticed an issue with the incompatible database state.
Then I thought, why not re install FIM sync service to have the database upgraded properly.
It worked like a charm!!
Now my FIM service is started automatically.
Similar Messages
-
Oracle ADf :Gives error like Invalid Object
Hi,
I am using SOA 11g for development. in my project i am having one view which contain two tables.
when i run my application it is giving error like
An unknown error occurred during data streaming.
Ask your System Administrator to inspect the server-side logs
Invalid object name 'ViewBookInfo'.
Plz suggest a solution for the same.
Thanks
VinodVinod,
So, did you look at the server-side logs? Is this an SOA application or an ADF application (if it's SOA, you should be on {forum:id=320}, but you'll need to provide more information and do some basic research even on that forum as well).
If it's an ADF application, what do the server-side logs say? What are you doing that causes the error? What is the exact version of JDeveloper?
John -
Profiler bug? (Invalid object name '#Results'.)
Hi. I've been using SQL Server Profiler to look for any "Exception" events, across any databases, etc.
Despite no issues from SSMS, I notice that the error message "Invalid object name '#Results'." shows up in Profiler when I run the following example queries (either ad-hoc or stored procedure):
CREATE TABLE #Results (myDate datetime)
INSERT INTO #Results(myDate) SELECT getdate()
SELECT * FROM #Results
DROP TABLE #Results
or
SELECT getdate() AS myDate INTO #Results
SELECT * FROM #Results
DROP TABLE #Results;
I'm all for standards... is there a way to re-write the query to prevent Profiler from catching a false-positive Exception?To add on Stefan's comment about deferred name resolution, remember that Profiler/SQL Trace (as well as Extended Events) expose internals of SQL Server operation that are not otherwise visible. An understanding of SQL Server architecture and internals
is sometimes needed to properly interpret the results.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
Err. Invalid Object name 'tblStatus'
Hi Expers,
While i run an allocation in
BPC i am getting an error
"Invalid object name 'tblStatus' in.
In the script i have used the stored procedure
and through that i have updating the tblfactwbappl
table. Whether this is the cause of this issue.
Please help me on this.
Regards & Thanks
Baijuchandran.BHi baijuchandran b,
Please refer to the SAP Note below and see if this might help you resolve your issue:
Note 1330760 - Work status in Allocation logic
Summary
Symptom
User may get an error message "Invalid object tblStatus" when running allocation logic.
Other terms
BPC 70M SP4 Microsoft, Allocation, Work status, IM 158009 2009
Reason and Prerequisites
"Allocation engine" may try to find the old table which was used for checking work status. But the table is not used any more from version 5. So the work status checking process fails with the error.
Internally, the features in work status checking process were changed (work status dimension, database table, ownership related to manager and owner) from version 5. But these features were not applied to the "Allocation engine" in logic.
Solution
The work status features are applied to the "Allocation engine" in logic.
This issue is resolved in 70M SP4.
Cheers^^,
Marvin -
Query timeout expired and Invalid object name
I have a program that processes data (dequeues) and polls about every 2.5 seconds - normally there are several records to process per second - it does this constantly 24/7. The program runs fine at about 100 sites. At 2 sites the following error occurs
about once per day. Typically the table has less than 10 records that get processed ie read then deleted. DataObjects are used ie the data is read, connection closed, processed, deleted using T-SQL from ADO - ie transactions are as short as possible.
Error#-2147217871 Query timeout expired. SQL:SELECT RealID, RxerID, PhoneID, Min(ServerDtTm), min(ID) FROM dbo.tblPreReceiver GROUP BY RealID, RxerID, PhoneID ORDER BY Min(ServerDtTm), min(ID)
Inner exception Error No. -2147217865. Error Desc:Invalid object name 'dbo.tblPreReceiver'.. Native Error:208 Source:Microsoft OLE DB Provider for SQL Server SQL State:42S02.
SQL Server 2008R2 (Express at one site and Standard another).
The program then runs again 2.5 seconds later without error.
Can anyone explain why?
I suspect it is a blocking error but the error message does not suggest this at all. There is another application which writes to this queue, this does not report the error.Yes, blocking can be the cause. The default command timeout is 30 sec and if the table is locked by an other process, the command waits until the table is accessable ... or the timeout raises. You could increase the timeout value or you could perform "dirty
read" = ignoring lock, but I don't want to suggest to do it.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution failed for dataset 'dataSet'.
(rsErrorExecutingCommand
Semantic query execution failed. Invalid object name
'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Invalid object error while migrating oracle forms 6i to APEX
Hi,
I have a form name abc.fmb and I did converted to xml and imported using application migration in APEX
With these I have nine PL/SQL libraries (PLL). converted it to PLD using rwconvertor and imported in APEX. Also, I have 4 tables i.e data base block in forms.
Now, when i m migrating forms to APEX it is giving an error message saying invalid objects and shows the table name and column name. But the column name that it shows is a text box in the form that is also a database item ...
eg:- addr is the block name in forms
item name dsp_name
error: invalid object
Please suggest.
Thanks,
AP.Hi AP
i would suggest this...
Oracle Application Express (APEX)
Regards,
Abdetu... -
Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" when starting my application created in LabVIEW 7.1? I am starting the application in a PXI rack running Windows XP. I have an executable written in LabVIEW 7.0 that runs without this error. After clicking the Continue button in the error, the application seems to continue happily.
Is there something I need to include when I make the executable?
I would like to understand and eliminate this start up error.
Thanks in advance.
BobNorthHi Bob,
I looked through the program and I figured out where the error is coming from, and potentially what is causing it. In a lot of the cases of the program you are searching a 1-D array for the name of the case, and if you don't find it then it skips the function and gives "Error 1 occurred at Config Data Registry.vi(CASENAME) invalid object 0". I attached a screenshot that shows what I mean. The Search 1-D Array.vi is returning a -1 which means it didn't find the case. The reason I believe this is happening is because the shift register for that array is not initialized. While the other cases "reset" and "register" interact with the array shift registers and most likely create the array you need, if the program defaults to the "get data" case then it will try to run that before registering and won't have an array to search. This would also explain why it only has this problem at first and seems to run just fine after that. To fix this you should either make an initial array and wire it into the shift register or make the "reset" case the default as opposed to the "get data" case.
Regards,
Peter W.
Attachments:
Config Data Registry.png 55 KB -
Invalid object error, for @CURRMBRRANGE
Hi,
I have been getting the error invalid object in line 1, when trying to retrieve the member using smartview 11.1.2.1.
The formula in the member is:
@SUMRANGE (9999,@CURRMBRRANGE (Period,Gen,4, ,0 ));
I have tried changing it to:
@SUMRANGE (9999,@CURRMBRRANGE (Period,LEV,0, ,0 ));
Can anyone suggest any other changes I can try out?
Thanks in advance.
AnindyoI guess the first question is: does the member formula (I am guessing a member formula) verify in EAS?
If yes, are you trying to write a YTD member formula?
When I put this formula into a new member in My Very Favorite BSO Database In The Whole Wide World, aka Sample.Basic:
@SUMRANGE("Sales", @CURRMBRRANGE("Year", LEV, 0, , 0)) ;It works on retrieval as below:
Product Market Scenario
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Year
Sales 31,538 32,069 32,213 32,917 33,674 35,088 36,134 36,008 33,073 32,828 31,971 33,342 400,855
YTDSales 31,538 63,607 95,820 128,737 162,411 197,499 233,633 269,641 302,714 335,542 367,513 400,855 2,589,510 You can see how the months sum up -- is that what you want?
Regards.
Cameron Lackpour -
Report error, Invalid object name 'v_lu_cpu'
Hi
I have a report that I have imported from another SCCM server that has it working. I have changed the datasources after the import but when I try to run the report I get this error message:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet0'. (rsErrorExecutingCommand)
Invalid object name 'v_lu_cpu'.
Does anybody know what this means?Ok, then I understand.
I'm not that good at reporting so if anybody can help out with replacing the code that uses v_lu_cpu with
something else, it would be very kind. Thank you
SELECT DISTINCT
v_r_system.netbios_name0 AS "Computer Name",
v_r_system.Description0 AS "Description",
v_gs_system_console_usage.topconsoleuser0 AS "Top Console User",
v_GS_PC_BIOS.serialnumber0 AS "PC Bios Serial Number",
v_gs_computer_system.manufacturer0 AS "Computer Manufacturer",
v_gs_computer_system.model0 AS "Computer Model",
CASE
WHEN v_gs_computer_system.manufacturer0 LIKE 'Dell%'
THEN 'http://support.dell.com/support/topics/global.aspx/support/my_systems_info/details?servicetag=' + v_gs_system_enclosure.serialnumber0
WHEN v_gs_computer_system.manufacturer0 LIKE 'Hewlett%'
THEN 'http://h20000.www2.hp.com/bizsupport/TechSupport/WarrantyResults.jsp?sn=' + v_gs_system_enclosure.serialnumber0 + '&country=US'
WHEN v_gs_computer_system.manufacturer0 LIKE 'HP%'
THEN 'http://h20000.www2.hp.com/bizsupport/TechSupport/WarrantyResults.jsp?sn=' + v_gs_system_enclosure.serialnumber0 + '&country=US'
ELSE '(Not available)'
END AS "Warranty Information"
FROM v_gs_processor
INNER JOIN v_r_system
ON v_gs_processor.resourceid = v_r_system.resourceid
INNER JOIN v_gs_system_enclosure
ON v_gs_system_enclosure.resourceid = v_r_system.resourceid
INNER JOIN v_GS_PC_BIOS
ON v_GS_PC_BIOS.resourceid = v_r_system.resourceid
INNER JOIN v_gs_computer_system
ON (v_gs_computer_system.resourceid = v_r_system.resourceid)
LEFT JOIN v_gs_system_console_usage
ON v_gs_system_console_usage.resourceid = v_r_system.resourceid
LEFT JOIN v_lu_cpu
ON Lower(v_lu_cpu.cpuhash) = Lower(v_gs_processor.cpuhash0)
WHERE v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 <> 12
AND
v_gs_computer_system.manufacturer0 NOT LIKE 'VMware%'
AND
v_gs_computer_system.model0 NOT LIKE 'Virtual Machine'
AND
v_R_System.Operating_System_Name_and0 LIKE 'Microsoft Windows NT Workstation%' -
Why its showing error : Invalid Object Name 'table name' when we try to insert data ?
Hi,
When i try to insert data in the database with the following query
con.Open();
cmd = new SqlCommand("insert into good(ID,Name) values('" + textBox1.Text + "','" + textBox2.Text + "')", con);
cmd.ExecuteNonQuery();
MessageBox.Show("Insert success");
con.Close();
its showing following error Invalid Object Name 'good'Use 3-part naming like: MyDatabase.dbo.good(ID,Name) .
Also consider using stored procedure for database INSERTs.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
Error Invalid object name 'mbrGROUPS'.
I'm attempting to validate the standard elimination logic for Intercompany eliminations. I'm getting the following error when I try to validate:
Invalid object name 'mbrGROUPS'. in:select [ID] from mbrGROUPS where [REPORTING] = 'Y'
Below is my logic for this. I'm trying to use this logic for a Legal consolidations application.
//=============================================
// Default Intercompany Eliminations
//=============================================
*INCLUDE SYSTEM_CONSTANTS.LGL
*SYSLIB ICELIMWITHCURR.LGL
//=============================================
// Elimination logic for three organization(H1, H2, H3)
//=============================================
INITIALIZE_ELIM()
ELIMINATE_ORG(H1)
ELIMINATE_ORG(H2)
ELIMINATE_ORG(H3)
*COMMITI fixed this myself. I forgot to change the "CURRENCYDIM" in the ICElimWithCurr file to my Reporting Currency, which in this case is "ConsolView"
Logic can be so humbling sometimes. -
ERROR - JBO-25005: Object name for type View Object is invalid
Hi All,
I am getting this error "JBO-25005: Object name for type View Object is invalid" while executing my VO query in Controller code. Can any one please tell me the reason behind this error?
I am creating a VO dynamically and .xml file of a VO is placed in a proper directly. Please let me know some inputs to resolve this.
Thanks & Regards,
-AbmI found the below explanation for the error mentioned. Check if your package name, Object names confirm to the standard specified
JBO-25005: InvalidObjNameException
Cause: An attempt has been made to associate a business component name with an object for which it is not valid.
Action: The name should be a valid Java identifier with no spaces or punctuation. Names are of the format myProjectPackage.BusinessPackage.BusinessComponent -
Sender CC for MS SQL 2005 Driver error invalid object name
Hello people,
can some one help me with the following problem?
I'm trying to implement a JDBC to IDoc XI/PI scenario with PI 7.1.
In RWB CC monitor i'm getting the following error : "Database-level error reported by JDBC driver while executing statement 'SELECT * FROM SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'SAP_SALES_TRANS_PAYMENTS'.'. For details, contact your database server vendor".
Communication channel configuration:
JDBC Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
Connection: jdbc:sqlserver://<IP>:1433;databaseName=<DB Name>
Query SQL Statement is : "SELECT * FROM SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0'"
Update SQL Statement: "UPDATE SAP_SALES_TRANS_PAYMENTS SET TRANSFERRED_FLAG='1' WHERE TRANSFERRED_FLAG='0'"
The name of the database is 'SAP_SALES_TRANS_PAYMENTS', is checked. Are the table name and/or table fields names key sensitive?
The MT definition is identical with the data base table.
Thanks StefanosHello,
this issue is solved now.
The problem was in the name of the database table. The Database was created for more then one
company codes (by an other partner company ) and the full/right name in the query is
SELECT * FROM dbo.<company_code>$SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0'
Best regards
Stefanos
Maybe you are looking for
-
Best course of action for lost iPhone
Hi Can any one advise the best security strategy when you loose an iPhone 3GS. I have it password protected and the data on it is of my prime concern. It seems that if II wipe it I can no longer send messages or attempt to locate it. Also if someone
-
Issue in installing oracle apps 11.5.5
Hello all, i have an issue while installing oracle apps single node(vis demo). if some one can help to sort out my issue or suggest some link where i can get the solution, i will be very thankful to him. problem 1. i installed the j2sdk-1_4_2_06-wind
-
I want to change the time line in Audition CS6 to display a 24hr time
I have a file I need to aline to a particular time in a 24hr time format. I can see that I can change it many ways to do with music and video but I use Audition for a different purpose. I need to set the time line to display something similar to a 24
-
Hi Can someone quickly tell me where to find these API"S com.sap.netweaver.bc.rf.service.par bc.rf.global.service.urlgenerator_api.jar Thanks in advance Subra
-
Hi, I am trying to implemented following scenario. Let say, I have two domains A and domain B ( both based on the Weblogic 9.2) , both are cluster domain having two managed server each. Domain A has a queue (physical) viz consumerQueue. (Could be dis