Error 25011. A file required to install the Rescue and Recovery environment could not be located

Hello everybody,
May I have your help and support on this error I faced with in installing the new Rescue and Recovery Version 4.5
"Error 25011. A file required to install the Rescue and Recovery environment could not be located. This setup cannot proceed. Make sure that the correct .tv.t file is located in the same as this setup package and restart this setup."
Awaiting,
Thanks
Hossein

heya,
I hope you managed to sort your issue out.
It's namely mentioned here - http://www-307.ibm.com/pc/support/site.wss/MIGR-69170.html
cheers
norbs

Similar Messages

  • I can no longer start FF and am getting this error message in a pop up box: The procedure entry point XRE_FreeAppData could not be located in the dynamic link library xul.dll. How do I resolve?

    Please help

    Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

  • How to partition HD in order to load the rescue and recovery backup

    HI All,
    Can anyone tell me how to properly partition the HD in order for the Blue Button(thinkVantage) to work again?
    Does it matter in the order how you create the partition...? (I create one partition then separate them via Partition Manager)
    I load the image back via Norton Ghost v10... but the Rescue and Recovery section is not responding... I remember the section is created as (EISA system) as it is reported by Disk Manger (not extended or logical type)
    Please help here...
    thanks

    One work-around that I have used successfully when I had an Acronis image but no R&R image is to do a full restore to factory using the factory recovery media (from Lenovo or home made on the TP) and then restoring only the windows partition from the non-Lenovo image.  This should leave the service partition, the MBR, and track 0 in the Lenovo mystery mode, and let the think button work, and you get your cloned up-to-date OS.
    I should add that in one of my experiments w/multi-booting and fiddling partitions, after using this procedure with Vista on my T400, vista wouldn't boot. It required a bootable vista DVD to run the vista boot repair procedure (twice).  After that, "think" and vista booted as expected.  I don't know of any way to do that with Lenovo install media.  If no MS Vista DVD is available, there are stripped down versions with the repair stuff only floating around the web.  The usual precautions re downloads apply.  There may be manual ways to repair the vista boot stuff that I haven't found yet.
    I can't say with certainty that this will always be necessary.  I may have screwed something up during the two step restore process.
    The magic "think" button is (potentially) pretty useful, but it and the "new improved" vista boot process are a little too fragile, IMNSHO.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Unable to install ThinkVantage Rescue and Recovery on new X220t

    I recieved me new X220t a few days ago and when trying to install Rescue and Recovery from the ThinkVantage Toolbox I'm greeted with a message stating there's not enough free space to install or upgrade the Rescue and Recovery environment.   Space can't be an issue as I'm running nothing but Windows 7 64bit Professional and Office 2010.   
    I could go the 3rd party route with Acronis but I'd rather use what came with my system and save some money. 

    It's an 80GB Intel SSD.  Here is the copy/past from msinfo32.
    Description    Disk drive
    Manufacturer    (Standard disk drives)
    Model    INTEL SSDSA2CW080G3
    Bytes/Sector    512
    Media Loaded    Yes
    Media Type    Fixed hard disk
    Partitions    3
    SCSI Bus    0
    SCSI Logical Unit    0
    SCSI Port    0
    SCSI Target ID    0
    Sectors/Track    63
    Size    74.53 GB (80,023,749,120 bytes)
    Total Cylinders    9,729
    Total Sectors    156,296,385
    Total Tracks    2,480,895
    Tracks/Cylinder    255
    Partition    Disk #0, Partition #0
    Partition Size    342.00 MB (358,612,992 bytes)
    Partition Starting Offset    1,048,576 bytes
    Partition    Disk #0, Partition #1
    Partition Size    64.93 GB (69,717,721,088 bytes)
    Partition Starting Offset    359,661,568 bytes
    Partition    Disk #0, Partition #2
    Partition Size    9.27 GB (9,948,889,088 bytes)
    Partition Starting Offset    70,077,382,656 bytes
    You're right about using the Win7 backup.   It will suit me just fine but I was curious as to why R&R was giving me trouble about not wanting to install.  

  • After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

    After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
    == This happened ==
    Every time Firefox opened
    == I installed a new version ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

    If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
    It is possible that some files got broken with the latest update.

  • Was trying to update my ITunes and get this error: The procedure entry point AVCFPlayerItemDurationChangedNotification could not be located in the dynamic link library AVFoundationCF.dll. Just got the new IPhone and am trying to share music files. Can any

    I have Windows Vista computer. I am trying to upgrade my ITunes so can share files with other home computer. (Just got the new IPhone). I get this system error: The procedure entry point AVCFPlayerItemDurationChangedNotification could not be located in the dynamic link library AVFoundationCF.dll. Tries system restore and redownloaded...NOW Itunes will not even open. Can anyone help?

    I uninstalled Apple Application Support, opened iTunesSetup with WinRar, and went down the list of msi's. AppleApplicationSupport was an install, all the others I did Repair.  Did not have to reboot. Works okay now.
    HTH

  • Updating my Win7 to 12.1, I get 'iTunes was not installed correctly Error 7 (Windows error 127). If I try to launch, I get 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'. Help!

    Windows version 7. Auto update of iTunes to version 12.1 from 12.0.1.
    At end of install process, message 'iTunes was not installed correctly. Error 7 (Windows error 127).
    Tried to launch iTunes, anyway, but immediately got message 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'.
    Tried downloading iTunes and updating manually - get exactly the same result.
    No problem using iTunes before this.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Mobile Device Support
         C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
    tt2

  • After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

    After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.

    Hi, I get the same error EVERY time iTunes updates.
    I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
    My Question:
    Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
    It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
    Thank You,
    Steve

  • HT203175 Why won't iTunes install properly? It gives the start up error "The procedure entry point JSStringGetUTF8String could not be located in the dynamic link library WebKit.dll"

    I can't get iTunes to install/start on my HP laptop. When I start/install the current version, I get the following error "The procedure entry point "JSStringGetUTF8String could not be located in the dynamic link library WebKit.dll". Why isn't this dll included in the distribution? What do I do to get iTunes to install on my 64-bit AMD HP laptop.

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    Does iTunes launch properly now?
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • HT1926 I have troublshooted uninstalling and installing itunes and i still cant open it an error message keeps coming up:  The procedure entry point AVCFPlayerApplesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AV

    I am unable to connect toitunes i have followed the troubleshooting for unistalling and installing iTunes and i still get this error message and it will not open the following is the error message:  The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AVFoundationCF.dll.
    then i get this other error message also as follows:  iTunes was not installed correctly.  Please reinstall iTunes  error 7 (Windows error 127)
    can anyone help me?

    See Troubleshooting issues with iTunes for Windows updates.
    iTunes 11.1.5 was released today and may work better for you.
    tt2

  • I have installed itunes 11.4 to windows vista and now I have an error; The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll.  What do i do to syn my phone

    My problem is after installing itunes 11.4 this is now a problem
    The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll
    is the first ERROR and
    some error 127 reinstall
    can you please tell me how to fix it?
    Im running Windows Vista
    All I want to do is back up my iphone 4s, so i can add my iphone 6 Very Fustrated

    Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

  • The procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll   . I got this error after downloading and installing Frame MAker 12. My system os is service pack 2.

    The above mentioned error is displayed when i open Adobe Framemaker 12 after installing it.
    the procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll
    this is the error.
    my os is windows service pack 2
    2 gb ram

    You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
    FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
    Also, 2Gb of RAM is a bit lean for FM.

  • Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

    updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Still getting same error message. Can anyone help me

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Error message-- The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library C:\Program Files (x86)\iTunes\iTunes.dll

    Error message-- The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library C:\Program Files (x86)\iTunes\iTunes.dll

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

    Hi
            I have tried to research these problems I am getting, but have not been able to resolve them.
    1st is the above DDE Server Windows iTunes.exe - entry point not found.
    This only occurs when I try to start iTunes.
    if I click ok , several times, iTunes will start but slowly.
    If at any time I have to reboot my computer I get
    iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
    if I click 3 times OK it goes away.
    To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
    Installing it but still get the same errors on reboot and trying to run iTunes
    Anyone any ideas please.
    I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
    Ram 4.00GB
    32bit OS
    Windows 7 Ultimate SP1
    Firewall - Zonealarm
    Virus   -  Zonealarm
    Thanks in advance
    Steve
    Message was edited by: Ybslik
    Message was edited by: Ybslik

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Maybe you are looking for