Error 255 when trying to downlaod MUSE through Cloud

I have tried to download Muse using both explorer and Chrome and I get the same error each time: Can anyone help with this?
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
----------- Payload: Adobe Muse 6.0.0.0 {9A554C9D-E12D-4205-8101-9F4337CD5673} -----------
ERROR: Third party payload installer InstallAdobeMuse.exe failed with exit code: 255

Hi linksandloops,
Have you performed the steps mentioned in the kb: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html. If yes then
Enable hidden admin account: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/.
Download Muse from the direct link: http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html and try to install again.
Kindly follow the very important instructions before download.
If still it does not work then kindly send me a private message with contact number.
Regards,
Romit Sinha

Similar Messages

Getting an Error:-9672 when trying to add printer through airport express

Hi everyone, I have a canon colour laser printer (LBP5000) works fine when I pop the usb straight in to the mac, but when I try setting it up by plugging the usb into my airport express I get an Error:-9672 this happens when setting up the printer in print & fax system prefs.
I have another printer set up on a different airport express, which works fine.... could this be a problem?
Any help would be great
Thanks
Lee

Hello Lee,
When you select the LBP5000 in the Printer Borwser > Default Browser view, the Print Using menu should automatically set. If it isn't, and you are having to manually set the printer, then that will be a likely cause for the error (which usually occurs when the wrong driver is selected).
Try turning off the Airport Express and the printer. After a few seconds turn the printer on first and after it finishes making it's warm up sounds, turn on the Express. Now try to add the printer via the Default Browser view.
If that doesn't help, check your Airport Express firmware version. Some previous postees have found that their problems are resolved by updating their firmware on their Airport Extreme/Express.
Regards,
Paul

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

Error message when trying to download norton av

hi,
I get an error message while trying to download Norton AV. It says to contact server admin and if at all the .exe file gets downloaded it says that it is not a valid WIN 32 application

Hello debyani,
I think some error occurred with the downloaded files. You should try to download it again and then try to Install it and before that please go through the link below it may help you.
http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-message-when-trying-to-install-Norton-Internet-Security/td-p/876274.

Error message when trying to upload a site to FTP

Keep getting this error message when trying to upload a site to FTP: Error creating folder //images. Click Resume to try again. If this problem persists, try again later.
Tried again for several days - same issue. I'm new to MUSE......help?

Hi Islanddawn,
While uploading to ftp if you are putting a '/' in the root directory, then please remove it and try again.
Regards,
Akshay

I am getting this error message when trying to download itunes on windows 7 32 bit: microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd

I am getting this error message when trying to download itunes on windows 7 32 bit: microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd
Can someone please Help?

I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Runtime Error message when trying to download 7.2

Can somebody please help me?
Whenever I go into iTunes now, it asks me if I would like to download iTunes 7.2. I say yes and this message pops up:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: iTunes
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
Then I hit OK and iTunes closes. This happened also when I tried to download 7.1, and I ended up downloading it from the site myself. I just really want to know what to do, because it has been doing weird things with my library and maybe that has something to do with it.

Hello debyani,
I think some error occurred with the downloaded files. You should try to download it again and then try to Install it and before that please go through the link below it may help you.
http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-message-when-trying-to-install-Norton-Internet-Security/td-p/876274.

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Getting error message when trying to access video on my iPad

Hi this is my first time on this site so bear with me if I do the wrong thing.
Here goes I have read through some of the answers to the question but mostly they seem to related to YouTube. My question relates to my iPad. I get an error message when trying to view a video which I synced from my macbook pro. The message reads "You do not have permission to access the requested resource" The question is how do I get permission. Has anyone got an answer would be much appreciated.

Hi this is my first time on this site so bear with me if I do the wrong thing.
Here goes I have read through some of the answers to the question but mostly they seem to related to YouTube. My question relates to my iPad. I get an error message when trying to view a video which I synced from my macbook pro. The message reads "You do not have permission to access the requested resource" The question is how do I get permission. Has anyone got an answer would be much appreciated.

Getting error 789 when trying to connect with a PC remotely via VPN

When we set up the VPN we are getting a Error 789 when trying to connect with a PC. Any suggestions would be appreciated.

The utilities, provided on the CD, are not required for the PC to access the Internet through the 802.11n AirPort Extreme Base Station (AEBSn). They are only necessary for administering the base station.
If your PC is currently configured as a DHCP client, it shouldn't have any issues connecting by Ethernet. The AEBSn will assign the appropriate IP addresses required for connectivity to the Internet ... just like it does for wireless clients.

Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?

I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?

Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?
This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
There is also a link on posting all necessary info, to help others help you.
Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
Good luck,
Hunt

Keep getting error 4002 when trying to update Genius

I haven't seen anyone write about getting error 4002 when trying to update genius in itunes. I select update genius and it gathers information and sends it to the itunes store I assume. And then waits a few seconds and then I get the following message "Genius results can't be updated right now. An unknown error occurred (4002) Please try again later." I've been getting this message for well over a month and I keep hoping they'll be an update or somehow it will magically be fixed, but nothing has changed. Anyone have any insight on this one?
The current ituned library it 123GB and is stored on external drives. It should also be noted that when I first turned on genius when it was released it went through this whole problem without a hitch. I just can't update Genius with any of the music I've added since then. I can't even get genius to recognize music that I got from the itunes store since I've had the problem.

Be careful - this was a disaster for me. Once I did this, I got a different error - an error 4010 and in trying to recover, caused a lot of library issues that forced me to go to a backup to fix. You'll find a lot of people having the 4010 problem. Basically iTunes Genius is a disaster and Apple isn't fixing it.

I get an error message when trying to install software update 4.2.8 "problem downloading, network connection timed out. Check network connections.

I get an error message when trying to install software update 4.2.8
"problem downloading, network connection timed out. Check network connections."
Anyone one else had this problem?

Brian-KK Sabah wrote:
I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
See Here for your Error Message -3259
http://support.apple.com/kb/ts2799

I am receiving an A12E5 error when trying to install my Creative Cloud desktop

I am receiving an A12E5 error when trying to install my Creative Cloud desktop. So I cannot proceed to a free trial. Thoughts?

Hi UniversityDesigner,
Welcome to the Community!
Please go through this thread: http://forums.adobe.com/message/5581753#5581753
Thanks!
Ankit

"an error occurred when trying to change modules"

When I switch repeatedly between Library and Develop with the R and E keys, I always sooner or later run into a problem where nothing happens when I press R. Really that should go the Develop module and enter crop mode -- what I'm usually trying to do, when this happens, is crop a bunch of photos. So I'll be using Library mode to identify the photos that need cropping, stepping through photos with the arrow keys, then when I find one that I want to crop, I press R, enter develop+crop mode, crop the photo, press E to return to library+loupe view, and continue.
Sometimes this works 10 times, sometimes it only works twice, but always, relatively soon, when I press R, "nothing" will happen. Actually what's happening is an error dialog appears saying "an error occurred when trying to change modules", then the error dialog immediately disappears before I can read it. I know what it says, because if I click the Develop module with the mouse, I get the same message but it sticks around until I press OK.
Once this happens, I'm entirely unable to use the Develop module until I quit the program. I had to quit and restart LR about 20 times during an hour of working with it last night, and this morning, in the first 15 minutes, I'm already on the 3rd restart.
Anyone else see this?
Details: LR 1.1 on Mac OS 10.4.10, 4-core Mac Pro, images are a mix of JPG from a pocket camera and NEF from a Nikon D40. I don't think it is related to the specific images, as it strikes apparently at random, and after exit and restart, I can crop that same photo, but a different one will eventually cause the same problem again.

Sean, thanks for the Return key tip. I knew about that at one point, but lately I was trying to use Enter (the one on the numeric keypad, at the very lower right corner of the keyboard, which is really easy to hit with my thumb even when my hand is on the mouse! And Enter doesn't invoke the crop, so I forgot that Return did). That is a better way.
I don't see the RE problem on my MacBook, only on my desktop computer, and that one is also experiencing other flakiness (
metamatt, "missing text / thumbnails / many Lightroom UI elements disappeared" #, 18 Aug 2007 3:08 pm) so I think I'm going to try a complete reinstall there.

Error 255 when trying to downlaod MUSE through Cloud

Similar Messages

Maybe you are looking for