Error 261 help offered

After many hours of frustration, I discovered that you cannot use symbols such as an "apostrophe" in the playlist name. Doing so will result in an unkown error #261 message and you will not be able to burn songs from the playlist to a CD.

You might want to give these steps a go, as a temporary workaround.
1. Launch the iTunes application.
2. Click on Edit in the menu and select preferences from the drop down.
3. Select the Advanced Tab.
4. Select the Burning tab under Advanced.
5. Select Data CD as the Disc format, and click OK to save the preference.

Similar Messages

  • The attempt to burn a disc failed, unknown error (261). Can't back up to CD

    The attempt to burn a disc failed, unknown error (261). I get this message every time I try to back up my music from itunes on to a CD. It doesn't matter if I try to back up all music or only music purchased from itunes. So far I have not been able to back up anything. Can someone please help me!!!! I have tried everything on the support website from apple, and nothing has worked. I am beginning to get very frustrated.
    Thanks

    +I know my computer is up to date on firmware, because I just bought this laptop 4 months ago - it's a brand new Dell Inspiron 1721.+
    Actually, in that case I definitely think you should check your firmware. I just had a look at the 32-bit Vista downloads page at Dell for your Inspiron 1721, and there's firmware updates listed there for four different drive models, all dated within the last four months.
    Head to the following Dell page and enter your model information to get to your Downloads page:
    Dell drivers and downloads

  • The attempt to burn a disc failed, unknown error (261) Can't back up on CD

    The attempt to burn a disc failed, unknown error (261). I get this message every time I try to back up my music from itunes on to a CD. It doesn't matter if I try to back up all music or only music purchased from itunes. So far I have not been able to back up anything. Can someone please help me!!!! I have tried everything on the support website from apple, and nothing has worked. I am beginning to get very frustrated.
    Thanks

    +I know my computer is up to date on firmware, because I just bought this laptop 4 months ago - it's a brand new Dell Inspiron 1721.+
    Actually, in that case I definitely think you should check your firmware. I just had a look at the 32-bit Vista downloads page at Dell for your Inspiron 1721, and there's firmware updates listed there for four different drive models, all dated within the last four months.
    Head to the following Dell page and enter your model information to get to your Downloads page:
    Dell drivers and downloads

  • Burn failed (unknow error 261)

    I tried to make a copy of a playlist on cd-rw. I got this message 'burn failed. unknown error 261'. Can anyone help me fix this problem?

    Does the name of the playlist have any punctation in it? & or ? or @ signs? Try removing them and trying the CD burn again.

  • What does error 261 mean and why does iTunes backup fail in version 7.3?

    I made a backup of my purchased music (all single items) in the previous version of iTunes for Windows. Now with version 7.3 for Windows I keep getting error 261:
    After inserting a blank CDRW, CDR, or DVD+RW (all previously without any problems in older iTunes versions) and selecting File -> Back Up to Disc, iTunes says: "Checking items for backup..." after which it shortly says: "Burning Disc... Initializing"
    To abrubtly end with: The attempt to burn a disc failed. An unknown error occurred (261).
    I used various burning options, including AUDIO and DATA CD, to no avail. The differences with my previous backup are:
    - more tracks;
    - complete albums;
    - DRM free items (upgraded);
    - audiobooks.
    Although my main iPod contains the complete library (luckily it is small), I can use it for backup purposes, but after re-installing Windows and iTunes, my iPod would not be recognised and my data would be lost.
    Shuttle SB83G5   Windows XP Pro  

    You are not doing anything wrong. This and many other errors have cropped up since version 7.3 was released.
    For now, the solution is to go back to version 7.2 where everything worked correctly.
    E-mail me at [email protected] and I will gladly share the steps I took with you. Apple does not allow posting a link to a site that they do not operate and therefore I can only help you privately.
    My Itunes is working perfectly again with version 7.2
    Jeff

  • Windows - No Disk Error - Please help!

    Windows - No Disk Error - Please help!
    Hi,
    I have the following set up:
    * Lenovo T-61p
    * Windows XP Pro, SP 3
    * HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
    I am getting the following error:
    Windows - No Disk
    Exception Processing Message 0xc0000013 Parameters 0x75CE023C
    0x84C40C84 0x75CE023C
    I have done a lof experimenting and thru process of  elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
    I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in.  In my case, this is drive E.  I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
    I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
    A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
    I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
    Anyone every any better, more permanent solutions?  Or know what the real root of the problem is?  What is scanning all the drives and being showing an error message because it found an empty drive?
    Thanks and Happy Holidays/New Year!

    I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
    I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
    I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
    I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

  • My iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!

    my iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!

    Hey jestinsinclairr,
    Thanks for using Apple Support Communities.
    After reviewing your post, it sounds like you had one issue and then got a second trying to resolve the first. A frustrating situation for sure. The first article linked has what to do if it is not powering on unless plugged in. The second article addresses the error you are receiving when trying to restore.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694#10
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Have a nice day,
    Mario

  • My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    Hey erinoneill24,
    Thanks for using Apple Support Communities.
    Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/ts1441?viewlocale=it_it
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
    Have a nice day,
    Mario

  • I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

    I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

    Although your message isn't mentioned in the symptoms, let's try the following document with that one:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • CD/DVD Problems w/7.3: Error 261 - DVD Backup & Not Recognizing Audio CDs

    Hello,
    Since updating to iTunes 7.3 I have had issues with:
    1) iTunes recognizing an Audio CD - so I cannot currently import from CDs. This goes for Windows too in Windows Explorer; I get an I/O issue error
    2) iTunes making a backup DVD - I receive the iTunes error 261 with a fresh disk; however, my Picasa photo program quickly created a photo backup DVD.
    Windows does successfully recognize a CD-ROM. Toshiba, my notebook manufacturer (Model M35-S456) does not recommend any chipset updates. I checked Intel's site (Chipset is 855PM - I/O controller is 82801DMB (ICH4M)) and it really seems like overkill to mess around with this since the issue appears linked to install iTunes 7.3.
    I have followed troubleshooting suggestions and submitted my diagnostics (to assisting Apple determine drives that are having problems) at the following post - http://docs.info.apple.com/article.html?artnum=93444
    Thank you,
    Derek
    Here is my output for iTunes CD/DVD diagnostics (with Audio CD in):
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    TOSHIBA Satellite M35
    iTunes 7.3.0.54
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), Pfc (2.5.0.204), sscdbhk5 (1.0.0.1), Cdr4_xp (8.0.0.212),
    UpperFilters: Cdralw2k (8.0.0.212), GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    NVIDIA GeForce FX Go5200 32M/64M
    Connected Device Information:
    Disk drive, TOSHIBA MK8025GAS, Bus Type ATA, Bus Address [0,0]
    Disk drive, USB Flash Memory USB Device, Bus Type USB
    CD-ROM Drive, MATSHITA DVD-RAM UJ-820S, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: MATSHITA DVD-RAM UJ-820S, Rev 1.00
    Drive is empty.
    The last failed data CD or DVD burn had error code 261(0x00000105). It happened on drive D: MATSHITA DVD-RAM UJ-820S on DVD-R media at speed 0X.
    Toshiba M35-S4561 Windows XP Pro
    Toshiba M35-S4561 Windows XP Pro

    hi, this could be a gracenote cddb issue, when you pop in an audio cd, itunes tries to access the gracenote database > if it cannot then sometimes the cd will not populate in itunes. to test : disable your internet connection entirely > then pop in an audio cd > does it read the disk? > then it is likely and issue with something blocking itunes from querying that site/server.

  • My iphone 4 would not back-up to to pc "because an error occurred" anyone offer any solutions to this,  I want to restore my phone to factory settings and reinstall my data but cannot back up first.

    my iphone 4 would not back-up to to pc "because an error occurred" anyone offer any solutions to this,  I want to restore my phone to factory settings and reinstall my data but cannot back up first. Original problem is that I cannot connect to any wifi system anymore - have tried resetting network settings but did not work.

    Try 1 step at a time and do a backup, if no joy then do the next step:
    1. Switching off your anti-virus and firewall.
    2. Computer iTunes menu > Edit > Preferences... > Devices > delete your backup

  • Error (261) when trying to backup purchases

    I have a new computer with SATA HD and SATA DVD burner (lightscribe) and am having a problem backing up my library.
    When I insert a blank CD or DVD and select backup... backup entire library... iTunes goes off and checks the library and starts its 'burn' but then the CD ejects and a message comes up:
    "The attempt to burn a disc failed. An unknown error occured (261)."
    I checked that the drive is compatible (it shows under preferences/advanced/burning) as suggested by the online support docs... and the burner works with Nero & Alcohol... and I have not had problems backing up in the past. The things that have changed recently are the new CD burner (Asus lightscribe) and upgrade to version 7.3.1 iTunes.
    Can I assume that I can 'manually' backup my library by just copying the library to another hard drive ? I just copy my itunes folder off to the second drive ??
    Thank you all.

    same problem error 261
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway D915GAG_
    iTunes 7.3.1.3
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), Pfc (2.5.0.205), AFS2K (3.1.20.0),
    UpperFilters: incdrm (4.3.20.1), InCDPass (4.3.20.1), GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Intel(R) 82915G Express Chipset Family
    Connected Device Information:
    Disk drive, WDC WD2000JD-22HBB0, Bus Type ATA, Bus Address [0,0]
    Disk drive, Generic USB CF Reader USB Device, Bus Type USB
    Disk drive, Generic USB MS Reader USB Device, Bus Type USB
    Disk drive, Generic USB SD Reader USB Device, Bus Type USB
    Disk drive, Generic USB SM Reader USB Device, Bus Type USB
    Disk drive, HP USB Device, Bus Type USB
    CD-ROM Drive, HL-DT-ST CD-ROM GCR-8483B, Bus Type ATA, Bus Address [1,0]
    CD-ROM Drive, _NEC DVD_RW ND-2510A, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: _NEC DVD_RW ND-2510A, Rev 2.0T
    Audio CD in drive.
    Found 9 songs on CD, playing time 39:59 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:53:72
    Track 3, start time 07:06:67
    Track 4, start time 09:45:50
    Track 5, start time 12:37:40
    Track 6, start time 18:24:17
    Track 7, start time 21:42:30
    Track 8, start time 28:40:20
    Track 9, start time 34:33:60
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 20 24 32.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    E: HL-DT-ST CD-ROM GCR-8483B, Rev 1.00
    Drive is empty.
    The last failed data CD or DVD burn had error code 261(0x00000105). It happened on drive D: _NEC DVD_RW ND-2510A on CDR media at speed 0X.

  • I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

    I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

    Click on the hard drive on the desktop, then File > Get Info. What does it say about permissions?  If this is just a data drive you may want to consider "ignore ownership on this volume".
    Otherwise I can only say I have not been reading good things about Seagate drives recently.  I have some of their rock-solid ones from about 10 years ago (still running well), but now...?

  • My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

    My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

    Sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try again.

  • Acrobat Error - need help! - Acrobat 9 Pro

    When I try to open an acrobat files my it trys to Open EVERY acrobat file on my computer and does so until I get the following message
    "There was an error opening this document.  The maximum number of files are already open.  No other files can be opened or printed until some are closed"
    Then I have to force quit.
    This just started happending a few months ago
    I am on a Mac OSX
    I need help!  Any suggestions?
    Debbie

    I  have a 10.5.8
    I am not that technical so not sure what you mean about applejack etc.
    Thanks for helping!
    Debbie
    Date: Sat, 10 Apr 2010 13:03:28 -0600
    From: [email protected]
    To: [email protected]
    Subject: Acrobat Error - need help! - Acrobat 9 Pro
    What version of OS X? Some people have luck by clearing their caches. This can be done with Applejack in 10.5. Onyx will work in SL.
    >

Maybe you are looking for