Error 2738 when upgrading ti ituines 7.4.3

I downloaded itunes 7.4.3 but I'm not able to install this upgrade on my windows vista system. I get error-code 2738. what's up??
thank you
francesco

This should help:
http://docs.info.apple.com/article.html?artnum=304405

Similar Messages

Error 3194 when upgrading to ios 7.

I receive error 3194 when upgrading to ios7 on my iphone 4 ( and I really don't know if it is 4s or just 4). I am working though the itunes softward on my home computer. It seems I am stuck in something called recovery mode. I have tried a variety of suggestions found on the web (e.g., editing a "host" file, checking firewalls and connectivity, etc.) to no avail. Any suggestions?

The iPhone was either previously jailbroken (the DFU restore should have fixed that) or it has a hardware error. I would vote for the latter.

Encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3

I encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3
I've tried upgrade iphone on three computers , the results are all the same.
One of the computers successfully upgrade my ipad to 8.3.
There are 2GB left on IPhone 5S before I perform the upgrade.
It should be enough for iTunes to finish the process, right?
But in the log, it says "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
why is that?
Any way for me to continue the upgrade? it seems it's almost done.
Thank you
the end of the log is as below:
[10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
[10:36:29.0714] entering fixup_var
[10:36:29.0714] entering update_var_directory_hierarchy
[10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
[10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
[10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
[10:36:29.0714] unable to copy directory: 2
[10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
[10:36:29.0714]
[10:36:29.0714] ==== end of device restore output ====
[10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
[10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
[10:36:30.0542] Restore completed, status:6
[10:36:30.0542] Failure Description:
[10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
[10:36:30.0542] Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
[10:36:30.0542] Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）

Hello there, Kenduck.
It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
Get help with iOS update and restore errors - Apple Support
Particularly:
Check your security software
Errors: 2, 4, 6, 9, 1611, 9006.
Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
If you still see the error message, check for USB connection issues.
Thanks for reaching out to Apple Support Communities.
Kind Regards,
Pedro.

Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.

I am having some trouble trying to get IOS 3.1 on my first generation Ipod touch. I have the latest Itunes, I do not have any dvd burning software like Anydvd that can interfere, and I've tried it on two different computers with no avail. Any help is greatly appreciated.

msoviolist, I opened a ticket via their so called "Express Lane" support page, I assume it'll take a couple of emails before they decide to credit you for the download. I would suggest linking to these two threads in the correspondence, this is what I included in the message;
=========
I've attached a couple of threads from the Apple support
forums, it appears this is an ongoing problem for many folks trying to
download the 3.1 upgrade for the 1st gen. iPod Touch, feel free to
check them out;
1) Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.
https://discussions.apple.com/thread/3373167?start=0&tstart=0#
2) How do I upgrade first generation touch software to 3.1.3
https://discussions.apple.com/thread/3009667?start=0&tstart=0
==========
Good luck...
Message was edited by: SpanishClash

I keep getting error 2324 when upgrading to version 10

I keep error 2324 when upgrading to version 10. Running win 7

Try disabling anti-virus also. You can also download the updates (not upgrade that is AA XI) from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows. With the downloads, you typically have to install them in order. Only reboot after the last install.

Error 51 when upgrading iphone 6 to ios 8.1.3.

looks like the serial number is lost when preparing the phone for the update. can't be verified by apple servers. tried to restore. nothing; still not recognized. tried dfu, same result. basically, i have a large, expensive brick

getting error 51 when upgrading iphone 6 to ios 8.1.3. sorry, i repeated myself

How to fix error (-1) when upgrading iPad2 to iOS 6?

hi all,
how to fix error (-1) when upgrading iPad2 to iOS 6?

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Error Message When Upgrading Firmware for BEFW114S

To all,
I have a BEFW114S with a firmware 1.42.7 which I wanted to upgrade to 1.52.02 However, I got the following error message when I tried update the firmware:
Message: Warning! Upgrade File Pattern Error
Any ideas of what might be causing this.
Thanks.
Babylon5

Hi , here is the problem..... The firmware 1.52.02 is for the model no BEFW11S4 V4.0 and i believe you have BEFW11S4 V3.0...
Download the firmware 1.45.10 for BEFW11S4 V3.0 and you should be able to upgrade the firmware successfully.

Receiving a -43 error message when upgrading to ios5.

How do you get past error code -43 when upgrading to ios5 on ms vista??

The only solution that I've found was here
http://gizmodo.com/5849160/the-complete-guide-to-updating-to-ios-5&rct=j&sa=X&ei =bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CCoQ-AsoADAA&q=iphone+ios+5+error+-43+when+ba ckup&usg=AFQjCNGGVjsr_rky-tiplqdj-1fBfXofPA
and here
http://www.macworld.com/article/162925/2011/10/how_to_upgrade_your_ios_device_to _ios_5.html&rct=j&sa=X&ei=bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CC4Q-AsoATAA&q=iphon e+ios+5+error+-43+when+backup&usg=AFQjCNEBBPx-ymDJPGPd-sBy8TZ1dDTbeQ
by:
1. Doing backup.
2. Using the Restore button and following the
All works fine now and all the settings are there.
BTW: it took over 2 hours to restre and that is with lots of apps and without songs, phothos and movies... that I removed before.Gizmo link above.

Itunes unknown error 3194 when upgrading to latest iOS

I've been trying to upgrade my iPhone 3GS to 4.3.2, from 4.3.1 iTunes keeps reporting an unknown error 3194, when verifying the downloaded update. I don't know what is causing this.
I have:
- Rebooted my PC (Windows 7)
- Rebooted iPhone
- deleted the update and redownloaded
None of these have solved the issue. Any ideas?

Hi pablo2001jedi,
The following link highlights the error code as being an issue with the connection to the Apple Server: http://support.apple.com/kb/TS1275
The link also has troubleshooting steps which you can try, but it is most likely some security software on your computer blocking the connection.
The easiest quick fix would be to update on a known working PC & Network connection, however making sure any security software is correctly configured should also resolve the problem, you can find troubleshooting for this at the following link: http://support.apple.com/kb/TS3125
Hope this helps.

Help! Internal Error #2738 when installing CD

So, I have a brand new computer and when I try to install the CD that came with my Centro I get error 2738. I did a search and found out that 2738 is for VBscript. So, I went to windows and downloaded latest windows script (which, btw latest is for XP and vista). After installing I still get same error. Has anyone encountered a similar situation or have any tips for me? I would appreciate any help regarding this matter.
Edit: I am running win7
Post relates to: Centro (Sprint)
Message Edited by kelvarn on 01-04-2010 11:17 AM

read another topic with the answer

Error 2738 when installing

Hi,
I bought a Ipod Nano today and to put music on it i have to install iTunes 7.
But when i want to install it, after windows installer is preparing a unexpected error occurs and it stops. It gives error 2738..
It does not even start the actual installer of iTunes..
Can someone help me? Because my iPod is rather useless now
(sorry if the english isn't totally correct..)

read another topic with the answer

Error 2738 when downloading

I'm trying to download quicktime so I can download itunes and I'm getting an error #2738, I get it when I try uninstalling whats already been installed...what do I do??

Are you getting this error when you are actually downloading the installer from the Apple web site? Or are you getting the error when you attempt to install QuickTime on your computer, having successfully gotten (downloaded) it from Apple?

Error message when upgrading to 7.3.2.6

I just (attempted to) upgrade to 7.3.2.6 (and after the install, it all seems OK for now) - but during the install, I got a "files in use" error message window, mentioning that Windows Explorer was running (Process Id: 432), giving me the option to Retry, Ignore or Exit.
I tried all options - I even Exited and rebooted - and re-upgraded after that, but keep getting the same error... So far iTunes seems to have upgraded and appears to be working - but could the install have missed some components now - and therefore should I expect trouble ahead?

Yes, i had the same error message after upgrading to 7.3.
I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
Search this forum - i hope you find a solution.

Error message when upgrading to the latest itunes

i've been attempting to upgrade my old itunes to the latest one, as i have a new ipod which needs the latest progrm to run. it seems to download alright but when i click 'run' at the end of the install it gives the error message -
invalid drive : F:/
does anyone have any ideas how to make it download? or if not is there a way to make my new ipod run on my older itunes system, thanks.

It is possible that the registry setting for one of your special folders is pointing at a drive that is not available.
Try downloading TweakUI form Microsoft. This lets you set the location of special folders:
It is one of the download here:
http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
This Apple article about something else tells you how to use it:
http://docs.info.apple.com/article.html?artnum=302398
Check that My Documents, My Music and My Pictures are not set to drive f:.
Surpisingly My Pictures is one that is often wrong.

Error 2738 when upgrading ti ituines 7.4.3

Similar Messages

Maybe you are looking for