Error 28: Selected item cannot fit in memory

Hello,
I am getting this error "Error 28: Selected item cannot fit in memory" when trying to jumpstart an x86 server. This happens when GRUB tries to load x86.miniroot. I am using latest Solaris 10 x86 U9
I have a server with 4GB of memory. Any idea what can the problem be?

This is just a guess...
The Solaris installation process is 32bit, regardless that the final environment will be 64bit if your hardware supports 64bit. A 32bit installation takes fewer resources and works on every system.
x86 hardware, plus 4GB of RAM and a 32bit environment just doesn't play well.
Memory address allocation for hardware is sometimes taken from the `front` of the address space instead of the hoped-for `end` of the memory in a system.
(Go look it up. The Internet is flooded with whiny postings of "why can't my 32bit OS see all my RAM".)
Temporarily reduce your total RAM, such as to 2GB. You can return it after Solaris is in place.
Go through the old read-only Sun Solaris forums.
http://forums.sun.com/category.jspa?categoryID=65
They haven't all been migrated to Oracle yet (and may never all make it across).
This issue doesn't exist for SPARC systems.

Similar Messages

Solaris 10 11/06 - grub Error 28: Selected item cannot fit into memory

I don't get install Solaris 10 11/06 in my IBM Thinkpad 600X laptop with 584 MB RAM memory.
When I try I get allways this message:
Error 28: Selected item cannot fit into memory.
I have seen similars topics in this forum but nobody has found a right solution.
Any idea to help me?
Thanks.

I was testing my memory with memtest86 for three hours and I didn't find any problem.
I think my memory is working fine.
Thanks for your reply anyway

Grub error 28: selected item cannot fit into memory

I installed arch, systemrescuecd, and trinity rescue kit on a usb stick. I used the mbr arch installed, grub 0.97, and edited the menu.lst to boot all os'es on the usb.
SystemRescueCD provides an os with all kinds of "rescue" tools, but also other tools like GAG(gag.sourceforge.net/index.html), Memtest86, FreeDos etc, which can be booted from the bootloader.
But, when I try to boot GAG, Memtest86, or FreeDos, grub gives me an error saying "error 28: selected item cannot fit into memory". According to grub, my lower memory is 630K, and my upper memory is about 3.4GiB. The GAG "kernel", is 24.7 kb, and the GAG initrd is 267.8 kb.
This is not really arch related, I know, but still, if you can help me, I'd be very thankful. Google doesn't seem to help me on this one.

Hello again,
i tried with Solaris 10 5/08 on VMware ESX 3.5 and VMware Server 2, both failed. I tried several ISO images, mounted as ISO or DVD, altered BIOS parameters in VMware ESX, but nothing works for me.
VMs where created with 1024mb RAM and 8GB disk space, more than recommended.VMware seems to be more successful with installing Solaris10:
http://pubs.vmware.com/guestnotes/wwhelp/wwhimpl/common/html/wwhelp.htm?context=guestnotes&file=choose_install_guest_os.html#3888649
It seems to be a problem of GRUB in Solaris 10 5/08, but i don't know how to solve it. Every idea might be a great help for me.

Error 28: selected item cannot fit into memory

Dear Forum,
I am trying to install Solaris 10 x86 OS into my SFX4200 server through Remote Control feature. I had setup the bios to 1st boot from CDROM and 2nd boot from Disk.
So, i inserted Solaris 10 x86 media into my laptop. Then i connected my laptop directly to the ILOM using cross cable. From the ILOM web page i had launch the Remote Control. I powered on the SFX4200 and i can see the boot up process through the Remote Control window. The boot up process has successfully read my laptop Solaris 10 x86 media.
At the end of the boot up process i saw three(3) option for me to choose:
1. Solaris
2. Solaris ttya
3. Solaris ttya( SFV60x and SFV65x )
I had selected, option #1 and #2 but few seconds later, i saw this error message "Error 28: selected item cannot fit into memory"
This is my laptop configuration:
- Microsoft Windows XP Pro
- 512 MB of RAM
- 40GB disk and 7GB available space.
Has anyone encountered the same problem.
Please, can someone help and guide me to solve my problem.
Thanks in advance.

Hspaans,
First of all, thanks for the reply.
I believe my machine has sufficient amount of memory. The following are the spec of my SFX4200 server:
1x Dual Core AMD Opteron Processor 280( 2.4GHz )
4x 2GB of Memory
Fyi, i had also tried to start the installation using optin # 2 " Solaris ttya " but still failed.
I will be much appreciate if you can help me or guide me to install Solaris 10 x86 OS through SFX4200 Remote Control window( Install OS using my laptop DVD Drive ).
Please let me know, if you require more information.

Error 28: Selected item could not fit into memory question?

hi evreyone,
don't know but Solaris 10 is not making any sense to me at all.the peoblem is i have installed Solaris 10 many times ,sometime GRUB detected Windows XP automatically and other times it could not and other times it halted during installation and said I/O error could not install all packages ,so i changed my CD-ROM anyway it did install Solaris 10 some times but GRUB could not detec Windows XP automatically and i could not configure GRUB to do so manually so i bought a new CD-ROM and mounted it on my pc.anyway when i tryed to install Solaris 10 and choosed Solaris from the booting screen it displayed the above mentioned error:
Error 28: Selected item can not fit into memory
the upper memory in the booting screen was: 752576 kb
lower memory: 639 kb
don't know but Solaris 10 is not making any sense to me since a week ,it's behavior is not understood .although i did run the install check before starting the installation and it did say Soalris 10 can be installed on you system.my hardware information is the following:
Gigabyte mother board with bult in VGA ,Sound ,Ethernet
40 GB Western Digital Hard Disk
750 MB of RAM's
Pentuiem 4 ,1 MB Cache
please adivce if anyone knows about this?

I was trying to fix this for more then 2 weeks , finally the solution to fix this was easy: GRUB new version 97 is crab ( sorry why i do not know but .. )
I have one disk with: windows xp and second part for fedora
I got the error after upgrading to fedora 6
I got GRUB 97 version with this fedora 6 automatically installed
and while booting on disk :
Error 28: Selected item could not fit into memory
all forums are explaining that it is not possible to boot via GRUB on a 2 nd partion to Linux ( fedora) because of 1024 constrains etc.
I can tell you that after installing GRUB version 92 in a fedora on the harddisk ( 2nd part) started via rescue cd
I installed the GRUB older version 92 forced to overwrite the GRUB version 97 on this partion of fedora
run grub via recue cd but run version 92 installed now
via command
/mnt/sysimage/sbin/grub
root ( hd0,1)
setup (hd0,1)
it installs grub on the boot record
and now I can boot without any problem on this GRUB in the boot record of the 2nd part of the disk
I use GAG on the MBR and GRUB ( version 92) on the boot record of Fedora partition and now it starts easy , no problems anymore
good to know, but it took some time to find it

Purchase order from Purchase Requisition error no selectable items found

while modifying the Purchase order item quantity, iam getting an error
Tcode me22n.
The order already released. now i want to ( change ) reduce the quantity.
No selectable items exist for Purchase requisition l_banfn.
message no 06053.
can anyone please help me on this.
thanks
rajesh.

Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM

What is the error message "This item cannot be shared while it is still referencing media on the camera" mean?

When I tried to create a movie, I got this message: "This item cannot be shared while it is still referencing media on the camera". What does it mean?
How do I resolve it?

eDude.com wrote: ... What does it mean? ....
It means that you cannot share something unless it resides on your computer.
eDude.com wrote:... How do I resolve it?
Import all clips that you plan to use in your finished project to your Mac before you edit and share your finished work.
For help see iMovie '11: Overview: Importing video and iMovie ’11: Import Video.

PBS video error, "The selected item is not currently available."

I was watching a lot of online content on video.pbs.org and now when I start any video on the site I get the 15 second advert and then the error in the title. I "think" (Not 100% sure) this started when I upgraded to flash 10. I also believe this is an error that most get who are region locked out of certain websites. For instance anyone outside of the US and Canada probably can't view anything on PBS Video. Any suggestions?
Windows 7
IE and Opera both up to date
Flash up to date
HOSTS file disabled
All IE settings/prefs - cleared/cleaned
Located in the U.S.
Other Flash sites do work such as CBS.com and Hulu
Thank-you
-apathybill

Hi, I don't know if this has anything to do with the problems you are having, but you might want to read about it. The hardware acceleration is Enabled by default. Several other users on the forum have disabled it and that has been helpful.
The topics listed have additional info.
Whether those outside of Canada and the U.S. being able to view that site or not, I don't know. I do know there are a couple of UK sites, that I can't view(U.S.):-)
Thanks,
eidnolb

Zen Micro "The selected items cannot be edited.Please try aga

When using the software to organise tracks eg assigning genre's to a new set of tracks i frequently get the above message. It then reappears for numerous occasions and takes ages to get to the end of. Often the player them won't undock and i have to remove the battery.
Does anyone else have this problem ?. i have already rebuilt the player etc. but the problem is still occuring.
Advice anyone ?
PS the player itself is ace but the PC sotware seems to struggle.
I also get the popular 'player not docked' problem.

What firmware version are you using?
I usually get that problem when I'm playing music on my micro using Creative mediasource and transfering files. So I stopped listening to music when I transfer files.
Check to see if you are using USB .. I'm thinking that it could be the problem but I won't find out till I get my USB 2.0 card. I recently bought mines online and just waiting for it to arri've. USB . can only send about MB/sec while USB 2.0 can send about 60MB/sec.

Error in Discoverer Viewer - Item cannot be found

Hi,
When i run a work book in discoverer viewer i receive an error "The following Item cannot be found: Workflow Item Attribute Values.Item Type. The same report is working fine from Desktop. Can anybody suggest what could the problem be?
Regards
Maytas

Hi,
The issue is resolved. The access to the underlying business area was not given to the user though the responsibility was assigned. Hence the error.
Regards
Maytas

This item cannot be shared while it is still referencing media on the camera.

Has anyone else received this error message
"This item cannot be shared while it is still referencing media on the camera."
It seems that many people are having trouble with exporting. This is why FCP is saying I can not export. I need a fix in a hurry.
-m

Thanks for responding Tom.
We shot with 4 different cameras and 3 different models. 2 Canon models. 2 - 60Ds and 1 - 5D. The forth camera was a GoPro. I was not at that shoot. All Canon setups were 24P. Again not sure on the GoPro.
The media was taken off the Card onto a MacBookPro and I transferred via external drive to my iMac. No camera was ever attached to the iMac. I am editing on the iMac.
I did start teh edit in a Final Cut Pro X trial version. But I am not sure that it is causing any of this problem.
yes. I have selected Copy Files to Final Cut Events Folder.
-MLRS69

No selectable items exist for purchase requisition l_banfn

Hi,
While creating PO with ref to PR getting the below error :
no selectable items exist for purchase requisition l'banf .
Checked if the PO is created, its not created,.
checked if the item is blocked/cancelled/deleted. Nothing is set.
PR looks fine. Dont know if any authorization data is missing?

Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM

Selected App cannot be used because the original file cannot be found and must be re-downlaoded from the iTunes

1- on the beginning i used to purchase any App from iTunes and will be downloaded to my MBAir with out any problems .
2- But, after 2 or 3 days i will get Apps icon as inactive icon in the itunes Aplication and cannot copy them to my iPhone neither cannot open them in his iTunes and i will get an error message " selected App cannot be used because the original file cannot be found and must be re-downlaoded from the iTunes".
MBAIR with Mac OS 10.8.4 with the latest iTunes version 11.1
thx.

And redownloading doesn't work...?

J1IEX post than made error like does not contain any selectable items

Respected Sir,
We have purchase the Goods From SEZ unit and it wil be treated as import made.
We doing the following activities
1. Prepared the Import P.O.
2. released the same P.O.
3. Doing the MIRO for Custome Vendor
4. Capture the J1iex
than we fins the below mention ERROR & Diagnoses and ERROR
Document 4400000016   does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
u2022     The document items have already been processed
(Suggest zero lines indicator set?).
u2022     the document items have been deleted or are blocked.
u2022     the document items have been created for a different plant.
u2022     (for reservations only) movements are not yet allowed for the reservation items.
u2022     (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
u2022     A confirmation must exist for the document items.
u2022     The document items must be released first.
u2022     The document is an R/2 document.
Procedure
Make sure your entries are correct.
u2022     If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
u2022     If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
u2022     If the document is a purchase order, production order or a reservation, you can
Kindly doneedfull above mention error
Thanks & Regards
Bipin Shah

HI,
Please check whether all the vendor and excise details have been maintained in J1id. i.e Excise rate maintainance.
Hope this helps.
Regards,
Prasanna
Award pls if helpful

P6 Professional R8.3 - (Cannot move selected items because the result will exceed the limit of WBS tree maximum levels)

Hi,
Has anyone encountered this error "Cannot move selected items because the result will exceed the limit of WBS tree maximum levels"?
Please advise if there's any way around / solution to this. http://s8.postimg.org/bj900spcl/1_error.jpg
Thanks.

Thank you so much MichaelRidino!

Error 28: Selected item cannot fit in memory

Similar Messages

Maybe you are looking for