Error 28: Selected item could not fit into memory question?

hi evreyone,
don't know but Solaris 10 is not making any sense to me at all.the peoblem is i have installed Solaris 10 many times ,sometime GRUB detected Windows XP automatically and other times it could not and other times it halted during installation and said I/O error could not install all packages ,so i changed my CD-ROM anyway it did install Solaris 10 some times but GRUB could not detec Windows XP automatically and i could not configure GRUB to do so manually so i bought a new CD-ROM and mounted it on my pc.anyway when i tryed to install Solaris 10 and choosed Solaris from the booting screen it displayed the above mentioned error:
Error 28: Selected item can not fit into memory
the upper memory in the booting screen was: 752576 kb
lower memory: 639 kb
don't know but Solaris 10 is not making any sense to me since a week ,it's behavior is not understood .although i did run the install check before starting the installation and it did say Soalris 10 can be installed on you system.my hardware information is the following:
Gigabyte mother board with bult in VGA ,Sound ,Ethernet
40 GB Western Digital Hard Disk
750 MB of RAM's
Pentuiem 4 ,1 MB Cache
please adivce if anyone knows about this?

I was trying to fix this for more then 2 weeks , finally the solution to fix this was easy: GRUB new version 97 is crab ( sorry why i do not know but .. )
I have one disk with: windows xp and second part for fedora
I got the error after upgrading to fedora 6
I got GRUB 97 version with this fedora 6 automatically installed
and while booting on disk :
Error 28: Selected item could not fit into memory
all forums are explaining that it is not possible to boot via GRUB on a 2 nd partion to Linux ( fedora) because of 1024 constrains etc.
I can tell you that after installing GRUB version 92 in a fedora on the harddisk ( 2nd part) started via rescue cd
I installed the GRUB older version 92 forced to overwrite the GRUB version 97 on this partion of fedora
run grub via recue cd but run version 92 installed now
via command
/mnt/sysimage/sbin/grub
root ( hd0,1)
setup (hd0,1)
it installs grub on the boot record
and now I can boot without any problem on this GRUB in the boot record of the 2nd part of the disk
I use GAG on the MBR and GRUB ( version 92) on the boot record of Fedora partition and now it starts easy , no problems anymore
good to know, but it took some time to find it

Similar Messages

Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
Can someone help us in resolving this
Thanks and regards
RS

Please expand the log also please check the SAP note 1835436
Regards
Aneesh

VBAI - LabView interface error - "The selected inspection could not be loaded", "Inspection File Error"

I have been programming/interfacing VBAI2012 and LV2011 for two years already.
There is one very frustrating problem:
- Sometimes after changing some codes in VBAI, and I switch to Inspection Interface (by clicking File->Switch to Inspection Interface), there would be error saying "The selected inspection could not be loaded"
- and then there is NO WAY to know what is going on. It does not tell you where the error is. Its so frustrating, you changed a couple of things, and the you have error switching to Inspection Interface, but then you don't know what is causing the error.
Is there any log file which I can check?

Guys,
I have resolved this issue and successfully installed and configured jive forums on my laptop.
I have documented high level steps on my blog http://orafusionmiddleware.blogspot.com (Non revenue generating, only for knowledge sharing)
Cheers,
Sandeep

Ipod error message "one item could not be synced. See Itunes for more information."

I recently updated software for Itunes and Ipod Touch. Seems like sync worked after update to itunes, but not after update to version 5.0 (9a334) on itouch. I get the error message on the itouch, but can't find anything on itunes to help me fix the error. Itunes acts like sync is happening as it should. Diagnostics shows that everything is just fine except for the "helper" not running. I did have disk space issues, but deleted a bunch of content to open up space. Rebooted everything and still getting the same message.

Look at this discussion for a number of different things to try. Quitting apps and deleting the iPod Photo Cache folder seemed to work for a few different users.
https://discussions.apple.com/thread/3390697?start=15&tstart=0
You can read about the iPod Photo Cache folder here.
http://support.apple.com/kb/ts1314

PBS video error, "The selected item is not currently available."

I was watching a lot of online content on video.pbs.org and now when I start any video on the site I get the 15 second advert and then the error in the title. I "think" (Not 100% sure) this started when I upgraded to flash 10. I also believe this is an error that most get who are region locked out of certain websites. For instance anyone outside of the US and Canada probably can't view anything on PBS Video. Any suggestions?
Windows 7
IE and Opera both up to date
Flash up to date
HOSTS file disabled
All IE settings/prefs - cleared/cleaned
Located in the U.S.
Other Flash sites do work such as CBS.com and Hulu
Thank-you
-apathybill

Hi, I don't know if this has anything to do with the problems you are having, but you might want to read about it. The hardware acceleration is Enabled by default. Several other users on the forum have disabled it and that has been helpful.
The topics listed have additional info.
Whether those outside of Canada and the U.S. being able to view that site or not, I don't know. I do know there are a couple of UK sites, that I can't view(U.S.):-)
Thanks,
eidnolb

When I click the link to install Firefox to my Android phone I recieve the error: The requested item could not be found.

My phone is an LG Optimus, presumable of the type necessary to install Firefox. The download does not appear when I click the link.
Duplicate of https://support.mozilla.com/en-US/questions/781287

Sorry but this phone is not compatible with the current mobile Firefox releases due to the ARMv6 (ARM11) CPU it uses when release work on ARMv7 cpu's.
Also it needs the Android 2.1 update if you are still running 1.6
You can perhaps try the experimental ARMv6 nightlies (Fennec).
https://wiki.mozilla.org/Mobile/Platforms/Android#ARMv6_.28experimental.29

Workflow error " Work item could not be found"

Hi Experts,
I used transaction SWI2_DIAG to diagnose the error and tried to restart the workitem manually .The changes were made to Org chart and now everything is fine but I am still getting error message:
Work item could not be found
Workflow 'Post with Clearing Workflow' step number 4: work item could not be created
Agent determination for step '0000000004' failed
Workflow WS93000005 no. 000004806372 activity 0000000004 role 'AC00000168': No agent found
Resolution of rule AC00000168 for task TS93000019: no agent found
Can someone explain what this error message mean and why i cant restart the workitem manually?
Thanks.

This is my message from Production:
Resolution of rule AC00000168 for task TS93000019: no agent found
Workflow WS93000005 no. 000004806372 activity 0000000004 role 'AC00000168': No agent found
Agent determination for step '0000000004' failed
Workflow 'Post with Clearing Workflow' step number 4: _work item could not be created_
This is my message from development.. I recreted the scenario and getting different message.
Workflow 'Journal Entry Approval- Approval WF' step number 36: work item could not be created
Agent determination for step '0000000036' failed
Workflow WS93000001 no. 000000986124 activity 0000000036 role 'AC93000003': No agent found
Resolution of rule AC93000003 for task TS00007914: _no agent found_
Edited by: Sergey on Nov 2, 2010 5:05 PM

'Administration item could not be processed' error in Sales Contract

Hello,
When I try to create a sales contract in CRM 5.0, I get the following error message:
Administration item could not be processed 46760D4DB17003F4E10000000A350350
Message no. CRM_ORDERADM_I001
Does anybody know how to solve this?
Thanks,
Jeroen

Hi Jeroen,
Pls check if you have implemented any exit.
This could be when you try to access any item level data in exit(Badi's)
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

The requested item could not be found error when trying to download Firefox 4 beta

I get the error "The requested item could not be found" when trying to download Android Firefox 4 beta.

Please check here to see whether Firefox is available for your phone:
https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements

Getting "Table %TEMPLATE does not fit into window" error

Hello,
I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
This only happens when I go to that printer. I can print fine to a laser printer.
I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
I have adjusted the size of the window that my template cannot allegedly fit into but still no luck. I have checked the height and width of the template and the window many, many times and still get the same error.
Has anyone seen this before? Please help. Thanks.

Hi James,
You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
What ever you create should be within this width and height .
So accordingly adjust the width and height of your windows and components within them
Regards,
Dep

Nokia 5800 - the selected files could not be copie...

I'm trying to move a few files around on my memory card whilst the phone is plugged into my pc.
There is over a gb of free space on the memory card.
I get the following error
the selected files could not be copied there is not enough free space on the device
Nice
- I'm moving files, not copying so it shouldn't need any free space
- even if it did need free space there is more than enough available on the card
how can i move files around ?

moving files doesn't mean like movin a cup or a book from ur table.. When moving, first the files r copied to a new location, nd then perhaps verified and then the source file is deleted.. So if u r movin 50MB of file, be sure u've atleast 100MB free.. Or move one at a time.
Are u using ur computer browser to move files?
I personally haven't found tht very efficient.. It either hangs, or stops or gives errors like ur phone is busy etc..
U can use the phone file manager or if u want advanced file managin, u could download Xplore, etc..
Regards,
Dr. Shoubhik

Window does not fit into page

Hi all,
I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM.
But its showing an error like 'Main window does not fit into Page'.
What could be the mistake?
Can anyone help me in this..
Regards,
Shanthi

Hi,
U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
if Your Space is small then data will be displayed in the next line.
And display The data in Smallest font possible.
Regards
sandipan

Grub error 28: selected item cannot fit into memory

I installed arch, systemrescuecd, and trinity rescue kit on a usb stick. I used the mbr arch installed, grub 0.97, and edited the menu.lst to boot all os'es on the usb.
SystemRescueCD provides an os with all kinds of "rescue" tools, but also other tools like GAG(gag.sourceforge.net/index.html), Memtest86, FreeDos etc, which can be booted from the bootloader.
But, when I try to boot GAG, Memtest86, or FreeDos, grub gives me an error saying "error 28: selected item cannot fit into memory". According to grub, my lower memory is 630K, and my upper memory is about 3.4GiB. The GAG "kernel", is 24.7 kb, and the GAG initrd is 267.8 kb.
This is not really arch related, I know, but still, if you can help me, I'd be very thankful. Google doesn't seem to help me on this one.

Hello again,
i tried with Solaris 10 5/08 on VMware ESX 3.5 and VMware Server 2, both failed. I tried several ISO images, mounted as ISO or DVD, altered BIOS parameters in VMware ESX, but nothing works for me.
VMs where created with 1024mb RAM and 8GB disk space, more than recommended.VMware seems to be more successful with installing Solaris10:
http://pubs.vmware.com/guestnotes/wwhelp/wwhimpl/common/html/wwhelp.htm?context=guestnotes&file=choose_install_guest_os.html#3888649
It seems to be a problem of GRUB in Solaris 10 5/08, but i don't know how to solve it. Every idea might be a great help for me.

Solaris 10 11/06 - grub Error 28: Selected item cannot fit into memory

I don't get install Solaris 10 11/06 in my IBM Thinkpad 600X laptop with 584 MB RAM memory.
When I try I get allways this message:
Error 28: Selected item cannot fit into memory.
I have seen similars topics in this forum but nobody has found a right solution.
Any idea to help me?
Thanks.

I was testing my memory with memtest86 for three hours and I didn't find any problem.
I think my memory is working fine.
Thanks for your reply anyway

Error 28: selected item cannot fit into memory

Dear Forum,
I am trying to install Solaris 10 x86 OS into my SFX4200 server through Remote Control feature. I had setup the bios to 1st boot from CDROM and 2nd boot from Disk.
So, i inserted Solaris 10 x86 media into my laptop. Then i connected my laptop directly to the ILOM using cross cable. From the ILOM web page i had launch the Remote Control. I powered on the SFX4200 and i can see the boot up process through the Remote Control window. The boot up process has successfully read my laptop Solaris 10 x86 media.
At the end of the boot up process i saw three(3) option for me to choose:
1. Solaris
2. Solaris ttya
3. Solaris ttya( SFV60x and SFV65x )
I had selected, option #1 and #2 but few seconds later, i saw this error message "Error 28: selected item cannot fit into memory"
This is my laptop configuration:
- Microsoft Windows XP Pro
- 512 MB of RAM
- 40GB disk and 7GB available space.
Has anyone encountered the same problem.
Please, can someone help and guide me to solve my problem.
Thanks in advance.

Hspaans,
First of all, thanks for the reply.
I believe my machine has sufficient amount of memory. The following are the spec of my SFX4200 server:
1x Dual Core AMD Opteron Processor 280( 2.4GHz )
4x 2GB of Memory
Fyi, i had also tried to start the installation using optin # 2 " Solaris ttya " but still failed.
I will be much appreciate if you can help me or guide me to install Solaris 10 x86 OS through SFX4200 Remote Control window( Install OS using my laptop DVD Drive ).
Please let me know, if you require more information.

Error 28: Selected item could not fit into memory question?

Similar Messages

Maybe you are looking for