Error 29 after trying to upgrade to 4.2

My 3GS was doing just fine until I tried to update it today. Now it's a useless brick that I am unable to restore. Anyone else seeing this or have any idea how to correct?

Hi
Error 29 is usually a hardware issue.
From http://support.apple.com/kb/TS1275
+Error 23, 28, 29, 1002, 1011, 1012, 1013, 1014, 1611: These errors may indicate a hardware issue with your device. Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue.+
Check the cable and check that the pins in the dock area on the phone are clean and free of debris like lint etc.
If all looks OK, follow through the steps in this article and see if you get a fix to the issue.
Hope this helps

Similar Messages

Error after trying to upgrade an iphone 4 to iOS 6

Tried to upgrade an iphone 4 to iOS 6, but was asked to connect to itunes. This attempted a restore (several times) but now phone is totally unusable. Can't switch it off and PC does not recognise it as a device. Can anyone help?

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

I ran into the follow error after trying to upgrade to the newest version of ITunes. "An application has made an attempt to load C runtime library incorrectly" I was direct to "Contact the applications support team for more information" Can any one help

I ran into a problem with iTunes after I upgraded to the latest IOS. I'm recieving the followig error messages, any help would be appriciated.
Microsoft Visual C++ Runtime Library
Runtime Error!
Programe C:\Program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.

Hello mobleymarvin,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

After trying to upgrade from 4.3.4 to 5.0 stuck on recovry and giving error every time im trying to restore

after trying to upgrade from 4.3.4 to 5.0 stuck on recovry and giving error every time im trying to restore
what to do ?
tried tiny umberlla dost do anything

What OS is on the Install/Restore DVD that came wit your G5? If Tiger 10.4.x, you will need a black, retail Leopard install DVD. There is no free download of Leopard, only free updates once you have installed the base OS.
First use your Mac's Install/Restore DVD to install an OS & apps. Then upgrade the OS.
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don't know what that signifies. Help?

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don’t know what that signifies. Help?
It is recommended that I ask for help, which put me here. What I really need is some customer service — not a chat room!

If Windows :
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from C: > Program Files > Adobe Photoshop CC 2014 .
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
It should update.
If Mac:
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from Applications folder:
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
Let me know if you face any error .
Error 49 occurs while updating the application , when Creative Cloud app does not have reference / Access to installed CC app, so that it can apply updates for the same .
You can try to update from CC app like Photoshop itself and check.

Error 8288: trying to upgrade software on ipod touch 1.1.5 to 3.1.1

Error 8288: trying to upgrade software on ipod touch 1.1.5 to 3.1.1

This error has been around this forum a couple of times. The only solution I saw, was contacting iTunes support: How to report an issue with Your iTunes Store purchase

Im getting this error after trying to laounch SQL*Plus

Hallo, guys!
Help me on this one. I'm new to Oracle on Windows 2000 Professional
Im getting this error after trying to laounch SQL*Plus
Error 6 Initializing SQL*Plus
Message file spl<lang>.msb not found
SP2-0750:You may need to set ORACLE_HOME to your Oracle Software directory
Urgent please respond
Thanks
sridhar

Verify the contents of the following subkey in your Windows2000 registry:
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_YOUR_HOME_NAME
Your Windows 2000 registry must contain several minimum parameters, defined as registry entries inside the above subkey (See http://download-east.oracle.com/docs/cd/B19306_01/win.102/b14304/registry.htm#i1006544). One of them is ORACLE_HOME, which could have been accidentally removed or changed. ORACLE_HOME must contain the home OS path to the SQL*Plus executable in your machine (For example, C:\Oracle\OraDB10g). I tried changing the name of the ORACLE_HOME registry entry in my machine and received the same exact messages you did when launching SQL*Plus.
In your OS, verify also Control Panel > System Properties > Advanced > Environment Variables > System Variables > Path, and make sure the above ORACLE_HOME's path is included in the Path variable (preferably in the starting position)
Regards,
Luis Morales
ConsiteNicaragua.com

There is an error when trying to upgrade to Mavericks from OX Lion

There is an error when trying to upgrade to Mavericks from OX Lion

So whenever i click on "free upgrade" ..that message shows up next to it..

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

You can also use Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
Direct Download Links for Adobe Software
Are you on a managed network. If yes please refer the Knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Kindly follow the very important instructions before download.
It might help you.
Regards
Rajshree

Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

Restore ur iPad to iOS 5 or 6( if u have downloaded)
<edited by host>
Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
Then set up your iPad as a new iPad .
Here you go, Now your iPad will be perfectly fine..

Ipad2 froze after trying to upgrade to ios6, how can i get it to come back on?

ipad2 froze after trying to upgrade to ios6, , have a black blank screen. how can i get it to come back on?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

What do I do after I got an error after trying to download the security update?

What do I do next when I got an error after trying to download the security update?

Thank you for providing these details. It makes helping you much easier.
You have a 16GB iPad, but have only 2.4GB available. This is likely contributing to the issue. This amount, 15% of the iPad's storage capacity, is the minimum free space you should have. But when updating iOS, you should expect the new version to use somewhat more space than the old. I believe going to Settings > General > Usage and freeing space will help with your issue.
Another recommendation would be to use iTunes on your computer to do the update instead of over-the-air.
I believe either one of these would help you. Both would be at least as good.

Error message after trying to upgrade iOS 6, Error message after trying to upgrade iOS 6

I tried to upgrade to IOS 6 on my ipad2 and get an error message. It won't let me try to download again. What do I do to download iOS 6?

I tried to upgrade to IOS 6 on my ipad2 and get an error message. It won't let me try to download again. What do I do to download iOS 6?

After trying to upgrade, I got the error 3014 and now I can't get the iPad to do anything. It continually shows the "plug in to iTunes" icon. How do I get past this problem?

Can't restore, can't power off, and pc can't detect iPad. Error code 3014 when trying to upgrade. Can't even restore to original settings. Opened Hosts files and I did not see 127....gs.apple.com, or other suggested files. Pls help.

Did you see the very end of this about not having enough space left on your computer specific to therror code 3014?
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Error 3002: If you experience this error while updating an iPod touch (2nd generation) or iPhone 3G, please use the standard update or restore process in iTunes (click Update or Restore).
Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again.

HT4623 my ipad wont restore after trying to upgrade software, now says Unexpected error (3) ....?

After trying to update software on my ipad it now will attempt to restore but gets to the end and says unexpected error (3)?? any ideas how i can solve this?

the 3 is in brackets (3)? Before that it says unexpected error has occured...
I cant remember what version we were on before updating.
I have just purshased a new computer and down loaded the latest version of itunes and still have the same problem...
My iphone updated fine...

Error installing or removing Itunes after trying to upgrade to 7.6

Hi There,
I recently tried to upgrade to 7.6 from 7.5 and this has caused me some issues.
Firstly when upgrading a dialog box opens stating that itunes.msi cannot be found in local settings - however it was there. I manually moved to the path still to no avail.
I followed all steps to remove itunes and do a clean install - as stated in the support site "how to uninstall section". This failed at the add remove stage. Stating "The older version of itunes cannot be removed. Please contact your technical support group".
As there was no add remove option I removed all references to itunes in my local settings folder, program files and registry and went to reinstall, however I am still getting the same message above when tryin to install.
Now I am stuck with no version of itunes at all on my PC. If anyone could help I would greatly appreciate it.
Do Apple have a default "scrubber" that will remove all reference/instances of itunes?
Many Thanks,
Martin

I'm having the same exact problem! The only diffrerence is that I haven't unistalled my current version and it still works. But I REALLY want those new iPod Touch Apps! But they require 7.6! Why is it when ever Apple does something great for us they some how find a way to screw us at the same time.
I don't want a scrubber however cause that migth wipe my settings and or library. Instead I want a magic file that fixes what ever apple screwed up and intalls 7.6!
....Or I suppose a copy of iTunes.msi for my version would do to....
My iTunes version is 7.4.3.1

Error 29 after trying to upgrade to 4.2

Similar Messages

Maybe you are looking for