Error (2931) VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
Experts,
kindly advice for this error when create vm from a templates, while i'm not having this issue when create the vm to another host from the same templates,
firewall is disabled and no antivirus on the host.
The network and the ping is very stable, and the WS-Management service is running on the host,
Host : windows server 2012 R2
VMM : 2012 R2 3.2.7895.0
VMM updated from RU2 to RU5
Error (2931)
VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
Unknown error (0x80338029)
Recommended Action
Ensure that the Windows Remote Management (WS-Management) service and the VMM agent are installed and running and that a firewall is not blocking HTTPS traffic.
This can also happen due to DNS issues. Try and see if the server (ms-lab-01.eccsolutions.local) is reachable over the network and can be looked up in DNS. You can ping the virtualization server from VMM management server and make sure that the
IP address returned matches the IP address locally obtained from the virtualization server.
If the error still persists, restart the virtualization server, and then try the operation again.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010.
Ok I will try another template,
and the drop happen in the customization after deploying the VHDX file as my first image.
I had this answer from partner forum. but i didn't try it yet
Backup your VMM database and then check the
tbl_VMM_Lock table in the
VMM database to see if it has any locks listed, do this after stopping the System Center Virtual Machine Manager Service.
If there are locks listed in the tbl_VMM_Lock
table you can clear them by executing the prc_VMM_ReleaseAllLocks
stored procedure.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010, Server Virtualization.
Similar Messages
-
Every time I try to access anything in the itunes store from my pc i get the following error "We could not complete your iTunes Store request. You do not have permission to access the requested resource. There was an error in the itunes store. lease try again later."
I have accessed the store just fine on my iphone and ipad.
I have restarted itunes, restarted the computer. reinstalled itunes.
Any ideas?Were you using Adobe Creative Cloud to download the application or the Adobe Download Manager? Was this a 'try before you buy' application?
It depends on how you're downloading and where you're downloading from before we can give you a satisfactory answer...
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display -
VMM is unable to complete the request. The connection to the agent sphyperv5.IMCB was lost
We are getting the following error. This seems to be after installing the DPM 2010 client. Not sure if there is a connection.
Error (2916)
VMM is unable to complete the request. The connection to the agent sphyperv5.IMCB was lost.
(Unknown error (0x80338012))
We never really lose the host. Everytime I look everything looks fine. Any ideas?
Michael BishopThis issue is not solved yet, we still invetigating
https://social.technet.microsoft.com/Forums/systemcenter/en-US/f013134b-3059-4ba2-bb3d-fb422c1b7c33/error-2931-vmm-is-unable-to-complete-the-request-the-connection-to-the-vmm-agent-on-the?forum=virtualmachingmgrhyperv
Regards, Samir Farhat Infrastructure and Virtualization Consultant || Virtualization, Cloud, Azure ? Follow and Ask here https://buildwindows.wordpress.com -
The server encountered an internal error and was unable to complete your request.
Hello
i am getting this error:
Server Error
The server encountered an internal error and was unable to
complete your request.
Could not connect to JRun Server.
the problem is that when i try to submit for email i am
getting this
the button is supposed to submit a email to ---->Sometimes a quick trick to try is to do a <CFABORT> on
the first line of code..run it, nothing will happen, then take it
out.. and when you run it again you'll probably get the detailed
diagnostics that'll tell you what it's not happy about.
Otherwise...just progressively comment out code until it
starts working, and you've isolated where the issue is. -
Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone??? -
After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
I am getting the error "We're sorry we cannot complete your request on the iTunes store at this time. Please try again later." on both my iPhone and iTunes on my computer. What is wrong with iTunes? Is the server down or what? I need to download some things and update some apps...
I've been getting the same message for like an hour now. Since everything was working fine a few hours ago, and nothing changed on my end before it stopped working, I'm guessing it's something on Apple's end. They probably already know about it by now, and are hopefully working on fixing it, so there's probably not much we can do but wait for them to fix it.
-
i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please help me
That would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards. -
Trying to send my iPhone 5 in for repair, keep getting this error:
"We're sorry, but we are unable to complete your request at this time.
Please try again in a few minutes or start over now.
(system.99)"
Tried using different browsers, and waiting few minutes, no joy : (
Any Ideas?Yeah, it kept doing it when I was trying to change the delivery address, changed it on my apple main apple profile adress and then it worked on the repair page.
-
Whenever I try to import videos, an error tab appears, saying "Could not complete your request because DynamicLink is not available"
Could not complete your request because the DynamicLink Media Server is not available. | Mylenium's Error Code Database
Mylenium -
ITunes Error, "We're sorry we cannot complete your request..."
I am getting the error "We're sorry we cannot complete your request on the iTunes store at this time. Please try again later." on both my iPhone and iTunes on my computer. I know my password and my Apple ID are ok because I can log on to here. Are the servers down? I need to do updates and want to download some things.... Thanks for the help!
Exact same problem here. Might be coincidental, but it started after upgrading to 10.6.5. Strangely, I have two accounts and only one of them is showing the error. The other one logs in just fine.
-
Unable to Complete Your Request when Registering for a free/trial download
Hi! Trying to download Standalone Converter I get the [Register] (for a free download?) button leading me to VMWARE END USER LICENSE AGREEMENT which I obviously accept and after I [Continue] my.vmware.com presents me with
"Unable to Complete Your Request
We cannot complete your request at this time. We are working to resolve the issue as soon as possible.
In the meantime, you can:
* Reload this page
* Go back and try a different link
* Go to My VMware home page
* Get Support"
My Profile is ok, my browsers are Firefox, Chrome, IE, latest ones. How do I get my.vmware.com to trust me enough to let me download free products? Thanks in advance.Hello,
This happens occasionally. Did you receive any emails from VMware about the download/trial license? You can also check your My VMware to see your current trials, is this one there?
Best regards,
Edward L. Haletky
VMware Communities User Moderator, VMware vExpert 2009, 2010, 2011,2012,2013,2014
Author of the books 'VMWare ESX and ESXi in the Enterprise: Planning Deployment Virtualization Servers', Copyright 2011 Pearson Education. 'VMware vSphere and Virtual Infrastructure Security: Securing the Virtual Environment', Copyright 2009 Pearson Education.
Virtualization and Cloud Security Analyst: The Virtualization Practice, LLC -- vSphere Upgrade Saga -- Virtualization Security Round Table Podcast -
Unable to send ussd requests in my iphone 5 after updating to the latest ios 7.0
Apdating to the latest ios 7.0 I am unable to complete USSD requests. It was working very well with ios 6.1.4. It tries to make a call instead of performing my request and says that the number is not valid.
Try to reset your Network Settings:
Settings -> General -> Reset -> Reset Network Settings -
This is a new problem for an IPod Touch I have had for a year. The IPod is hooked up by cable and appears in ITunes. I can examine all the content on the IPOD and I can click "sync". It goes through to Step 7 and then the error messages occur. First "a session could not be started with the IPod" and when that dialogue box is closed, the message "a connection could not be established to the IPod."
Maybe:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities -
The requested feature DSC-Service is not found on the target machine.
Hi,
I'm trying to create a DSC Pull Server with a 2008 R2 SP1 Virtual Machine,
While many of the forums and tutorials have helped, particularly https ://www .google.com/url?url=https://davewyatt.wordpress.com/2014/06/07/how-to-install-a-dsc-pull-server-on-windows-2008-r2/&rct=j&frm=1&q=&esrc=s&sa=U&ei=7BavVKvxMIHEmAWDjoLwBQ&ved=0CBQQFjAA&usg=AFQjCNEUHC8QBHfNgChYXnMQe87rXrHz1g
after installing all of these modules and moving on to later tutorials I'm experiencing an error every time I try to run a pull server configuration scrpit.
After running the script found here: http://www .systemcentercentral.com/day-1-intro-to-powershell-dsc-and-configuring-your-first-pull-server
I then trid to execute that code on the localhost,
it came up with this error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error
message: The requested feature DSC-Service is not found on the target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : localhost
Please Help, I cannot find the DSC-Service Module, and while some scripts have allowed and Pull Server to be created, they do not function peroperly because of this error.
Thanks a lot.
P.S. due to this being a 2008 R2 SP1 machine When then running the command: Add-WindowsFeature DSC-Server (As has been suggested by a lot of soureces) This error Will Come up:
Add-WindowsFeature : ArgumentNotValid: Invalid role, role service, or feature: 'DSC-Service'. The name was
not found.
At line:1 char:1
+ Add-WindowsFeature
+ ~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (:) [Add-WindowsFeature], Exception
+ FullyQualifiedErrorId : NameDoesNotExist,Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureComm
andHi Anna,
I'm in the same situation as Nathys.
I tried everything you indicated. However, it still does not work. I got the same error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error message: The requested feature DSC-Service is not found on the
target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : devops-01
The SendConfigurationApply function did not succeed.
+ CategoryInfo : NotSpecified: (root/Microsoft/...gurationManager:String) [], CimException
+ FullyQualifiedErrorId : MI RESULT 1
+ PSComputerName : devops-01
PS C:\Workspace\dsc> dism /online /Enable-Feature /FeatureName:DSC-Service
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Enabling feature(s)
[==========================100.0%==========================]
The operation completed successfully.
I have restarted the computer, but it still does not work.
Maybe you are looking for
-
Share Photos on the same iMac with different user accounts... How do You???
Hello, I was wondering if there is a way to share photos with another user (same computer, different log-in names) on the same iMac? There are two users on my iMac and I want to be able to share photos and other documents, music etc. with them, but c
-
Macbook Pro 15" - clamshell mode doesn't work after installing Mavericks
So I've upgraded to Mavericks, but my late 2011 MBP 15" has stopped working in clamshell mode (closed lid with external display on) – display just does not detect an input after closing the lid. Anyone experienced this?
-
"Microsoft Outlook Not Installed" error message
I attempted to sync my calendar to my 80GB iPod classic but there's a problem, it can't seem to acknowledge the existence of Outlook on my computer. I suppose that could be because I don't technically have outlook on my computer. I have windows mail
-
i want to import an access data base to an oracle bata base, but the data is in an "arabic" language so when i converted the access, the data showed in the oracle was not readable... so what to do to convert the data in the arabic language?
-
Internal Order with Commitment Mgmt Issue (ME23N)
Trying to close the Internal Order that has a Commitment amount. Unfortunately, as long as SAP calculates a Commitment Due the Internal Order will not close. I cannot Delete Commitment Amount (ME22N) because it will change the Quantity amount also. M