Error 2950 System Resource Exceeded

Hello Team,
I am going to set warning to No for a series of queries that they need to run one after the other and then at then end to add text message and then set warning to yes. But I get an error message: Error 2950 System Resource Exceeded.
How can I resolve this question?
GGGGGNNNNN
GGGGGNNNNN

Hi GN,
>> set warning to No for a series of queries that they need to run one after the other and then at then end to add text message and then set warning to yes
Could you share us a simple demo to reproduce your issue? I made a research about "Error 2950 System Resource Exceeded" and found it might be caused by the complexity of the query.
I think you could try the steps as following to troubleshoot this issue.
#1 Just run the series of queries one by one to check whether the query could work correctly.
#2 Just set the warning to No and the warning to yes with one simple query.
If you find it was caused by one query, I think you need to change your query to many simple queries and the link below might be useful to you.
# Error message when you run a query in Access 2007: "System Resource Exceeded" or "Query is too complex"
https://support.microsoft.com/kb/918814?wa=wsignin1.0
In addition, it would be helpful if you could share us a simple demo to reproduce your issue.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Similar Messages

Error 3035 System Resource Exceeded Office 2010 SP2

Hello,
I have copied a database to a new server 2008R2 running Office2010SP2. The query has been working without issues on Office 2007 (Server2003) for some time without issues.
After moving the database to a more powerful, ESX virtualised server with plenty of RAM and disk space, I am receiving these errors.
It does not happen every time but most of the time it shows the error. I have compact/repair number of times, and simplified the query down. There is about 65000 records with a basic filter in query, the total size of db is < 300Mb
Does anyone have a fix for it or able to assist. I have tried the hotfixes but are for SP1
Thank you

Please download and install the appropriate hotfix from the Microsoft Knowledge Base Article:
http://support.microsoft.com/kb/2726928

"System Resource Exceeded" for simple select query in Access 2013

Using Access 2013 32-bit on a Windows Server 2008 R2 Enterprise. This computer has
8 GB of RAM.
I am getting:
"System Resource Exceeded" errors in two different databases
for simple queries like:
SELECT FROM .... GROUP BY ...
UPDATE... SET ... WHERE ...
I compacted the databases several times, no result. One database size is approx 1 GB, the other one is approx. 600 MB.
I didn't have any problems in Office 2010
so I had to revert to this version.
Please advise.
Regards,
M.R.

Hi Greg. I too am running Access on an RDP server. Checking Task Manager, I can see many copies of MSACCESS running in the process list, from all users on the server. We typically have 40-60 users on that server. I am only changing the Processor Affinity
for MY copy, and only when I run into this problem. Restarting Access daily, I always get back to multi-processor mode soon thereafter.
As this problem only seems to happen on very large Access table updates, and as there are only three of us performing those kind of updates, we have good control on who might want to change the affinity setting to solve this problem. However, I
understand that in other environments this might not be a good solution. In my case, we have 16 processors on the server, so I always take #1, my co-worker here in the US always takes #2, etc. This works for us, and I am only describing it here in case it
works for someone else.
The big question in my mind is what multi-threading methods are employed by Microsoft for Access that would cause this problem for very large datasets. Processing time for an update query on, say, 2 million records is massively improved by going down
to 1 processor. The problem is easily reproduced, and so far I have not seen it in Excel even when working with very large worksheets. Also have not seen it in MS SQL. It is just happening in Access.

Access 2010 warn "System Resources Exceeded" when change machine

My Access file has 1.2GB and need to run a lot of simple Update SQLs. The program run well on my old PC.
I recently change the PC from Core 2 Due to I5-4570S. The Access
warn "System Resources Exceeded" when running. I use the old PC to run and it is ok.
My old PC is E7500 2 GB ram, Win 7 (64bit) + Office 2010 (64bit). New PC is I5-4570S with 8GB ram, with same OS and Office. Why the system resources would exceeded on my new machine?
I searched many websites for this and cannot find a well solution. Does anyone know how to solve it?
I have posted this question on Access 2010 help forum before, please refer to:
http://social.msdn.microsoft.com/Forums/office/en-US/60810447-2f18-452e-b752-c23bda4a67aa/access-2010-warn-system-resources-exceeded-when-change-machine?forum=accessdev

I don't use ODBC. I use ADO with ACE connection string to connect database.
The Access version of new pc is newer than my old pc already.
I tried in different PCs with different setting and found that in 2GB ram, the program is stable. If 4GB or above, the error appeared.
The error does not appear at the same command all the time. It may not appear sometimes. If I try to compact the database and re-run the command, it may pass, but not always.

Error: insufficient system resources exist to complete the requested service

Hi,
Hope all are well. I am getting this error "insufficient system resources exist to complete the requested service" while trying to install Lookback Adapter on my Windows 7 Professional OS installed on my HP Laptop.
Well, there is more to this problem. Actually I have VMWare installed on my Laptop where everything was working fine. At one fresh boot, I found VMWare Host-Only adapters were missing. So I tried to enable them and could never do so. I tried to troubleshoot
a lot but couldn't get it working. Not sure why but I thought of uninstalling Lookback Adapter and reinstall and see if that works and there you go, I am getting "insufficient system resources exist to complete the requested service". I am sure if
I can solve this one for Loopback Adapter, I can also make VMWare environment working as there definitely appears to be a relation between these two.
So by now, I have at least read 20 different articles and did a "Clean Boot" of OS and uninstalled all unnecessary applications from it. But I still can't install Loopback Adapter.
Can some Microsoft expert provide a solution? I can see many people facing this problem and many of them haven't found a solution. Note that I have admin rights on my OS.
Any quick help will be greatly appreciated!
Thanks,
N Jo

Based on the information found on the internet and on the Microsoft website, there is nothing wrong with the OS.
How much personal research have you done looking for solutions?
See Microsoft info links @
http://www.microsoft.com/en-us/search/results.aspx?form=MSHOME&mkt=en-us&setlang=en-us&q=microsoft%20loopback%20adapter%20windows%207
See Google info links @
https://www.google.com/search?lr=&as_qdr=all&q=microsoft+loopback+adapter+windows+7&revid=308607325&sa=X&ei=KIOxU8zaNIqvyAT6soKQDw&ved=0CGgQ1QIoAQ&biw=1128&bih=871
And based on the thread @
http://social.technet.microsoft.com/Forums/windows/en-US/259c7ef2-3770-4212-8fca-c58936979851/how-to-install-microsoft-loopback-adapter it has been working for the past 5 years.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA)

Hello Gurus
i have installed windows server 2012 RTM with Hyper-V. i already created virtual machine with virtual fiber channel adapter connected to physical one. sometimes when i restart the virtual machine it gets failed to start again and the following error appears
in the event viewer of the host:
error id 21502
'Virtual Machine xyz' failed to start.
'xyz' failed to start. (Virtual machine ID number)
'xyz' Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA). (Virtual machine ID
number)
'xyz': Operation for virtual port (C003FF18F98C000E) failed with an error: No physical port available to satisfy the request (Virtual machine ID
number).
error id 1069
Cluster resource 'Virtual Machine xyz' of type 'Virtual Machine' in clustered role 'xyz' failed. The error code was '0x5aa' ('Insufficient system resources exist to complete the requested service.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
appreciate your help
Ashraf

Dear All,
Subject : Need to create a file cluster
in Guest Vms (Host machine : Windows 2012 R2), using MSA p2000 strorage with HBA Qlogic (HP 8Gb PCIe Host Bus Adapter)
Note: It's a direct connection from HBA to HP MSA p2000 (No SAN switch in between)
Currently I am using Qlogic HBA (HP
81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter- Part No. AK344A).
Unable to create vPort using Microsoft
Hyper-V (Win 2012 R2) & secondly using QConverge
Console utility.
When trying to create Microsoft
Hyper-V (Win 2012 R2), I received the below error.
Secondly, when I am trying to create vSAN switch in using Qlogic QConverge Utility the above error is popup.
Currently I am using the following latest version of Qlogic Firmware & Drivers...
HBA - Running Firmware Version: 7.00.02
HBA - Driver Version: STOR Miniport 9.1.11.24
If any body the same issue, Please could you update me as earliest.
Regards,
Mirza

While Browsing SSAS 2005 Cube Getting Error " The following system error occurred from a call to GetOverlappedResult for Physical file: Logical file: '' : Insufficient system resources exist to complete the requested service."

Hi Guys,
When I try to Brows Cube (SSAS 2005), I get below error (Sometimes):
TITLE: Microsoft SQL Server 2005 Analysis Services
Server: The operation has been cancelled.
The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\674.fact.data', Logical file: '' : Insufficient
system resources exist to complete the requested service. .
The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q23.0.prt\385.fact.data', Logical file: '' : Insufficient
system resources exist to complete the requested service. .
BUTTONS:
OK
and I think due to above Error, Index on a Particular Attribute (EMP_ID) of a DIMENSION DIM_EMP is getting dropped from FEW of the Partitions (Folders) and started getting new error:
TITLE: Microsoft SQL Server 2005 Analysis Services
File system error: The following error occurred while opening the file '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\688.DIM_EMO.EMP_ID.fact.map'.
BUTTONS:
OK
I followed the above path and did not find file 688.DIM_EMO.EMP_ID.fact.map in folder PARTITION_2013Q31.0.prt. Once I rebuild the Index (ProcessIndex) for this partition, I am able to See file 688.DIM_EMO.EMP_ID.fact.map.
But again when next time I get error "Insufficient system resources exist to complete the requested service", Then 688.DIM_EMO.EMP_ID.fact.map will be dropped and will not be available in folder PARTITION_2013Q31.0.prt.
Anyone had similar issue. Could you please share your experience and resolution if any.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi Shiven,
In your scenario, the issue occur at sometimes, right? Base on my research, the issue can be caused by that calculation estimate exceeded available memory. Possibly due to possible number of dimension members and sizes of keys. And 32bit environment didn’t
allow for any expansion to the SSAS memory space.
To avoid this issue, please try to use userva to fine tune the 3GB setting down to 2900 since /3GB is the likely
cause (has been for most other customers who encountered the same problem before). The KB Articles below discuss that setting in detail.
How to use the /userva switch with the /3GB switch to tune the User-mode space to a value between 2 GB and 3 GB
Regards,
Charlie Liao
TechNet Community Support

Hyper-V 'Insufficient system resources exist to complete the requested service' after turning hypervisorlaunchtype off and back to auto

Hello everybody,
I've looked far and wide for anybody who has experienced the issue that I am currently dealing with in hopes of not duplicating an already answered question. I found nothing, but please forgive me if it slipped by me.
My issue began after installing VirtualBox to virtualize one of my favorite Linux OS's. Of course, I changed the BCD hypervisorlaunch type to 'off' so I could take advantage of HAV. Everything went great with Virtualbox, and my OS was running perfectly smoothly.
Today, I needed to boot into one of my Windows virtual machines in Hyper-V. I changed the hypervisorlaunchtype to 'auto' in BCD and rebooted my machine.
At this point, everything seemed normal. Windows took a few seconds longer to reboot and gave me a message about making configuration changes. After reboot, I logged into my PC and fired up Hyper-V. While one of my VM's was booting, I received multiple errors
about why my VM couldn't boot - every single aspect of my VM was getting an error. I am getting 'Failed to allocate resources' errors, 'Insufficient system resources exist to complete the requested service' errors, 'could not find virtual switch' errors.
It seems like they hypervisorlaunchtype did not actually change, but when I tried VirtualBox I received a 'VT-X is not available' error, so Hyper-V has taken ownership of that part of the chip. I rebooted another time after that, then a cold boot after that.
It seems like I'm missing something pretty obvious, but I can't find any information on what it might be. I've never had any issues like this before, and have been using Hyper-V on this laptop for around 9 months. Any help would be greatly appreciated!
I'm running Windows 8.1 Pro x64, 8GB DDR3, Intel i7. Guest machines included Windows XP, Windows 7 and Windows 8.

The virtualbox networking stack is not compatible (I know that).
Beyond that, details could only explain what else VirtualBox is locking.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

[823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server.

Hi,
I am facing an issue while loading fresh data into SQL server database.
we are able to load data into staging area, but while processing stored procedures system face bellow error message :
[823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server during a write at offset 0x00000243bd0000 in file 'E:\SQLDB\DBName.mdf'.
Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC
CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
we use windows 2008 R2 with SQL server managment studio 2008.
Appreciate your suggestion.
Thanks in advance.
Best Regards,
Manorath
Manorath

Hi Manorath,
Based on my research, this issue can be occurred in the following scenarios:
You are running a DBCC command on a large database. For example, you are running the DBCC CHECKDB statement on the database. At the same time, you run many DML statements on the database.
You create a database snapshot for a large database. At the same time, you are running many DML statements on the database.
In these scenarios, the SQL Server service stops responding. The DBCC CHECK statement is never completed, and you receive the error message repeatedly.
This issue occurs because the sparse file for a database snapshot file has exceeded the file size limitation in NTFS file system. When the operating system error 1450 occurs, SQL Server enters an infinite retry loop.
To fix this issue, please download and install Cumulative update package 1 for SQL Server 2008 Service Pack 1. Besides, because the fixes are cumulative, each new release contains all the hotfixes and all the security fixes that were included with the previous
SQL Server 2008 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix.
Reference:
http://support.microsoft.com/kb/967164
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

When i open .exe error poops Insufficient system resources exist to complete the requested service

when i try to open some exe it tells me: Insufficient system resources exist to complete the requested
service
but before it was working

Hi,
According to the error message, it could be a Service running that is consuming all the memory, you may check the memory.
Diagnosing memory problems on your computer
http://windows.microsoft.com/en-us/windows7/Diagnosing-memory-problems-on-your-computer
Please aslo check the CPU and memory performance to determine which application use too much resource.
http://windows.microsoft.com/en-in/windows7/view-cpu-utilization-and-other-performance-information
It could be what a lot of posts online talk about a software hive corruption. If you have any unnecessary external device connected to the machine, you may unplug them. Also uninstall 3rd party antivirus software.
Then, please try clean boot mode and check the result:
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista.
http://support.microsoft.com/kb/929135
Meanwhile, you can use this tool to scan your system and check if this is a virus-effected issue:
http://www.microsoft.com/security/scanner/en-us/default.aspx
If the issue did not occur before, please try to use the system restore, return to the point which did not appear the problem.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Windows Modules Installer - Error 1450 Insufficient System Resources

I've run into a major problem with the release of Windows 7 Enterprise. It seems that somewhere along the line after installing my applications, the Windows Modules Installation Service has decided to stop working.
When trying to start the service through Services Management I get the following: "Windows could not start the Windows Modules Installer service on Local Computer. Error 1450: Insufficient system resources exist to complete the requested service."
This means that Windows Update doesn't find updates, sysprep fails, and I get a blank list for "Turn Windows features on or off".
Can anyone help?
(update: After testing with some clean installs of Windows 7 Enterprise, it looks like the problem happens after installing ArcGIS Arcinfo Workstation 9.3. Uninstalling did not fix it.)
trelf

i hope this gets posted to the thread - if not i apologize, this is my first post on here.
Let me just say this - i've been a Microsoft guy for like... over 20 years now, but I have to say this year this whole platform has really seemed to fall apart for me on so many levels, and when i have the best equipment money can buy its a bit of a let
down to say the least.
Short version is - i tried the above and it didn't work, and i'm getting this Windows Modules Installer constantly trying to run and its failing repeatedly for no known reason... i suspect maybe tied to my backups which are microsoft windows based as well.
This fix above DID NOT work for me unfortunately - i set the limit, did the reboot and still can't run SFC /SCANNOW - it fails with same error and still having the same errors in the System Log - its 7036 and 7023 alternating one after the other nonstop
it appears, every 30 seconds.
Any ideas?
Thanks,
cnorton3
PS: just to note, i DO NOT have ArcGIS installed / funny enough i do know what the software is but i do not (and never have) used/installed it.

T-code CJ30,system gives an error of maximum time exceeds

Dear Sir
When we are executing T-code CJ30,system gives an error of maximum time
exceeds and some time the report is coming,we have exceeded the time
also but no outcome,since our project builder is not so
huge.Particulary we are facing in one project and rest of the project
takes lots of time.
Regards
Kunal Joshi

Hi,
Kindly write in the order of steps you have performed in the system.
with what you have written i got this:
You don't have big projects.
When you run CJ30, it gives time out error.
is this you want to say?
Regards,
Harsh.
Edited by: Harsh Saxena on Sep 10, 2010 2:40 PM

Error unable to allocate system resources

Hi,
In LabWindows/CVI I want to create a buffer of shorts, but when I run the
program
I get the message unable to allocate system resources. When I create
the buffer with chars I don't get that error..
What to do?
Thnks

roy schrieb in im Newsbeitrag: [email protected]..
>
> Hi,
>
> In LabWindows/CVI I want to create a buffer of shorts, but when I run the
> program
> I get the message unable to allocate system resources. When I create
> the buffer with chars I don't get that error..
> What to do?
>
> Thnks
Roy,
please show us the code you try to create the buffer. Maybe there is
something wrong with it.
Stephan

Help Please - System Resource Error

I have a demo tomorrow and I need to demo off my machine
(local). I have CF Server version MX7 and I am using MS Access 2003
database SP2 and I have just started to get the attached error. Is
this a CF server error or can anyone tell me how to fix?
The queries all run fine but I get this system resource error
after I try to run the same query twice.
Any and all suggestions will be appreciated.
Attach Code

The error is coming from MS Access, and is merely displayed
from the ColdFusion page request. The Microsoft support site shows
at least one known cause of the error such that queries that have
complex WHERE clauses can encounter this. Although your query seems
rather simple, it seems that you've hit some type of limitation of
the Access database.
See this for more:
http://support.microsoft.com/kb/918814/en-us
You might want to run the free MySQL database instead of MS
Access.

Error 2950 System Resource Exceeded

Similar Messages

Maybe you are looking for