"Error 3000: Data Service is unavailable" error message (Web)?

Ever since I got my Palm, I've had difficulty getting on the web.
It says: "Connecting to Broadband Access" but then an error message box appears saying: "Service Connection Progress: Error 3000: Data service is unavailable".
I then have to soft reset every single time, and then I am able to access the internet just fine.
Is something wrong with my Palm? This is a brand new Palm I purchased through Verizon in June.
What can I do to fix this issue, without having to soft reset every time I want to access the internet?
Post relates to: Treo 700p (Verizon)

I have the same error (and other errors too) with my 700P from Verizon.  This is what I have found with playing.  All can be repeated.
1)  If I turn off phone radio then turn back on I can browse the web all day long, I can send MMS messages, I can check my email, etc.  All relating to the "data" portion of the Verizon service.  No Problems. But.........
2)  As soon as I make a call (use the "voice" portion of the Verizon service) and then try to do one of the following above mentioned I get all kinds of ERRORs depending on the specific program I'm in/trying to use.  No matter what.... error, error, error, bla, bla.
3)  I can turn the phone radio of then back on and all works fine "data" wise until I make another call.
4)  Note, you don't have to do a soft reset or take the  battery out to get it to begin working again, just turn the phone radio off then back on.
I HAVE DONE THIS AND CAN MAKE IT REPEAT EVERY TIME WITH THE PHONE FRESH OUT OF THE BOX OR AFTER PERFORMING A HARD REST or with all normal apps installed.  Does not matter.
Some other tid bits of info....
1) It appears to not matter what city I am in.  The problem is the same as discribed above.  Confirmed cities are: Atlanta-GA, Savannah-GA, Memphis-TN, Columbia-SC, Bristal-TN.
2) It appears to ALWAYS happen on the "EDVO" network as the "EV" is always showing on the phone screen.  Have not been able to try in an area with out the EV, aka the 1x area.
  This PROBLEM of course is a MAJOR pain in the rear.  I have called Verizon tech support about the problem multiple times.  Eash time they said they had no "record" of me calling about the problem documented in their computer.  The first tech said it was my software causing the problem and to do a hard reset and don't load the problem software back on (even though I already told him I did that).  The next tech said it was a currpted file and to do the hard reset and reinstall and all would be fine (even though I already told him I did that) and said to trust him, he see this all the time.  The next tech said the phone was bad and FedEx'd me a new phone.  It did the samething right out of the box as described above.  The last tech said they need to "re-provisioned" my phone and said that would fix the problem.  So she did something on her end then told me to "program my phone" doing the *228, option 1.  Still does it.  No correction to the problem.

Similar Messages

  • Data Services - Error Consuming Web Service from SAP CE

    Hello all,
    I developed a very quick sample real-time job in Data Services just to test the web services and connectivity between BoBJ DS and SAP CE.  The real-time job doesn't do anything fancy, just converts characters from lower case to upper case.  In SAP CE I am attempting to use the web service navigator to test the WSDL (http://localhost:28080/DataServices/servlet/webservices?ver=2.0&wsdlxml).  SAP CE correctly connects to the WSDL and gives me a selection list where I can drill down to Real-Time Services -> my real time job.  I put in some test data and execute the web service and I get the following error:
    Invalid transport binding settingsDocument is not well-formed: Expected End-tag 'MAIN', received:a, on position: 0 (:main:, row:1, col:0)
    The strange thing is that the HTTP response message shows that the service actually executed, because the data has been converted to upper case as it was supposed to.  Also, if I go into the Data Services Management Console it shows the service was executed with no errors.  The strange thing is that I notice something wrong when I look at the response message vs. the source message:
    Source:
    <?xml version="1.0" encoding="utf-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
      <SOAP-ENV:Body>
        <pns:MAIN xmlns:pns="private">
          <pns:RECORD>
            <pns:NAME>Test Name</pns:NAME>
            <pns:NUMBER>Test1234</pns:NUMBER>
            <pns:ADDRESS>123 Testing Lane</pns:ADDRESS>
            <pns:CITY>Santa Clara</pns:CITY>
            <pns:STATE>CA</pns:STATE>
            <pns:POSTAL>95057</pns:POSTAL>
          </pns:RECORD>
        </pns:MAIN>
      </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    Target:
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soapenv:Body><MAIN xmlns="private" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Documents%20and%20Settings\TEMP\Desktop\Schema.xsd">
    <RECORD><NAME>TEST NAME</NAME>
    <NUMBER>TEST1234</NUMBER>
    <ADDRESS>123 TESTING LANE</ADDRESS>
    <CITY>SANTA CLARA</CITY>
    <STATE>CA</STATE>
    <POSTAL>95057</POSTAL>
    </RECORD>
    </aw:MAIN></soapenv:Body></soapenv:Envelope>
    If you notice in the target message the closing <MAIN> tag is preceded by "aw".  I'm not sure what this means, and I'm not sure where it's coming from, but I think it could have something to do with the error because it doesn't match the opening tag. 
    I'm not sure if this is something that is set in Data Services?  I've checked around quite a bit but I am stumped!  Can anyone help?

    what is the version of dataServices you are using ? there was a bug that was fixed related to this issue, if you are on 12.1 (DS XI 3.1) then use the latest 12.1 Fix Pack 12.1.1.7
    if you are on 12.2 (DS XI 3.2) then use the latest SP and FP 12.2.2.1

  • Can iPhone 4 cache e-mail activity until data service is available?

    If I am in an area where data service is unavailable - say, on a subway train - if I use the e-mail app, it complains that data service is not available, and any changes that I make (i.e., deleting a message, marking a message read, etc) is not saved or reflected against the associated e-mail account. Is there any way to change this behavior, so that the iPhone works more like other e-mail devices (specifically, Blackberry or a device running GoodLink)?

    If I am in an area where data service is unavailable - say, on a subway train - if I use the e-mail app, it complains that data service is not available, and any changes that I make (i.e., deleting a message, marking a message read, etc) is not saved or reflected against the associated e-mail account. Is there any way to change this behavior, so that the iPhone works more like other e-mail devices (specifically, Blackberry or a device running GoodLink)?

  • Adapters in Data services

    Hi,
    As said Data services is kind of similar middle ware product  like SAP PI. Can any one tell me what are the different adapters used in Data services for maintaining the message flow of different message formats.
    thanks,
    Ravi

    Hi Ravi,
    Take a look at slides 9-12 in this BOBJ Data Services Overview deck I gave at ASUG this fall:
    http://csc-studentweb.lr.edu/swp/Berg/articles/ASUG/ASUG_data_integration_Berg_v6.pptx
    Dr. Berg

  • I want to use data service,Idon't know how to download it

    I want to use data service,Idon't know how to download it,if you have data service please send me thanks a lot!

    Hello Long,
    you can download it here:
    http://service.sap.com/bosap-support
    (around middle of the screen:) “Browse Analytics Downloads: Installations, Upgrades and Support Packages”
    (on top of the page:) “Installation and Upgrade”
    SAP Data Services.
    Regards,
    Laszlo
    Message was edited by: Laszlo Badovszky

  • Issue with Data Services.

    <b>Description:</b> There are no any opportunities of submitting web-enable Data Services from client service control(WorkShop 9.2 beta) based on WSDL.
    <b>Step to reproduce:</b>
    1. Create any data service.
    2. Create web-enable data service (http://edocs.bea.com/aldsp/docs21/appdev/wsdlclt.html#wp1056096).
    3. Modify a method “submit” as it was described in (http://edocs.bea.com/aldsp/docs21/appdev/wsdlclt.html (See point: Developing DSP-Enable Read-Write Web Services)).
    4. Generate a client service control(WorkShop 9.2beta) based on WSDL of web-enable data service.
    5. Try to submit any data changes with method “submit”. (There are no any opportunities of submitting).
    Could anybody explain me how I can submit(store) data with
    service control(WorkShop 9.2 beta) based on WSDL of web-enable data service?

    I think if you switch the order of (2) and (3) you'll get what you want.
    If you generate the WSDL before introducing the 'submit' method, your wsdl won't have a submit method.
    "Developing DSP-Enabled Read-Write Web Services
    If your Web service must support submits from Java Web service clients, you first need to modify the JWS file before generating the WSDL, as follows..."

  • Error message using print set-up utility" server-error-service-unavailable"

    while trying to use my printertoday, an error message came up" server-error-service-unavailable". i cannot add the printer in the printer set-up. it is showwing up, so i know that the usb connector is working. has anyone ever encountered this before?

    Hi aychekay
    Try following:
    - Add a TimeStamp Datatype Column to the table on the SQL Server
    - Rebind the tables into your database
    - Try your code again
    You never should run an Access Application against an SQL Server in readwrite mode without having TimeStamp datatype columns in your tables. Already for performance reasons this is a must and also, if you have datetime datatype fields on
    the SQL Server that are not exclusively maintained by Access, as the SQL Server may add miliseconds when writing the data. Same for Single precision datatypes, that may be rounded until you get the result back from the server. If you have a Timestamp datatype
    column in your table then Access is sure the record wasn't changed in the meantime and will not recheck the received record again against the database for changes in one of it's fields.
    Henry
    <aychekay> wrote in message
    news:[email protected]...
    This problem didn't go away yet. I'm having it too in Access 2007 (SP2 not installed yet) with a SQL Server 2008 Express backend. I'm sure my code is not reference any form controls or other object references. Access just complains if you try to run an Execute
    with "DELETE" on a table that has an identity column. I've resorted to deleting using a DAO recordset and loop instead for now.
    I actually started out using MySQL with MySQL's ODBC drivers and my statement worked fine. Only when I migrated to SQL Server did I start to have this problem.
    Just sayin...

  • Just updated to IOS 7 and two issues:  First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

    Just updated to IOS 7 and two issues: 
    First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".  I'm not sure what this really means...
    The second issue is when I try to select "Manually Manage Music"
         The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC".  Do you want to erase this iPhone and sync with this iTunes library?  An iPhone can be synced with only one iTunes library at a time.  Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
    So... I don't want to do that, but I do what to be able to Manage my music.  I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
    Anyone have any ideas?

    I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

  • I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
    tt2

  • I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (what does this mean?)

    I recently updated my iTunes to the most recent version and I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (Does anyone know what this means and if it is going to cause me issues?)

    http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

  • When I attempt to sych with I tunes I get the following Error Message.  "Itunes was unable to load data class information from synch services. Reconnect or try again later."  How do I fix this?  This started happening after I updated to the latest version

    When I attmpt to synch my Iphone I get the following error message.  "Itunes was unable to load data class informationfrom synch services.  Reconnect or try again later.  This started after I uddated to the latest version of Itunes. What should I do?

    My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade. 
    Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down.  Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
    Still:  Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?!  Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake). 
    **banging head on table**

  • Error message: "iTunes was unable to load data class information from Sync Services. Reconnect or try again later."

    I'm getting this error message: "iTunes was unable to load data class information from Sync Services. Reconnect or try again later."
    Later has come.
    What does it mean?
    How can I sync my iPad?
    Thanks

    Hi vbsugihara,
    Thanks for visiting Apple Support Communities.
    You can find troubleshooting steps to resolve the error message you're seeing in this article:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    All the best,
    Jeremy

  • I recently began getting an error message: "iTunes was unable to load data class information from Sync Services.  Reconnect or try again later."  How can I correct this?

    I'm getting the following message when I try to sync my iPhone in iTunes:  "iTunes was unable to load data class information from Sync Services.  Reconnect or try again later."  This message began appearing a few days ago.  Before that, the sync function worked just fine.  Can anyone help?  Thank you!

    Hi vbsugihara,
    Thanks for visiting Apple Support Communities.
    You can find troubleshooting steps to resolve the error message you're seeing in this article:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    All the best,
    Jeremy

  • IPHONE 5: can't receive calls & random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational.

    IPHONE 5:  can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off.  ATT went through the standard protocol - resetting network, resetting sim card, etc.  No changes.  Other phones working fine in same region with same carrier.  Apple's solution is to restore software, but haven't gone there yet.  Anyone successfully addressed this/these issues?   

    I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

  • I have tried to sync my iPad to iTunes but got an error message saying that i\tunes was unable to load data class information from Sync Services. Any advice would be gratefully received.

    I have tried to sync my iPad to my iTunes following an update to the latest IOS system. I keep getting an error message: "Unable to load data class information from Sync Services"
    Any help would be much appreciated.
    Mike

    Hey Mike Urwin
    Start with the article below for troubleshooting syncing issues with Sync Services.
    Advanced troubleshooting for Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
    http://support.apple.com/kb/TS2776
    Regards,
    -Norm G.

Maybe you are looking for

  • Assertion failure error while using hierarchy column in 11.1.1.7.1

    Hi all, I have done In-place upgrade of OBIEE from 11.1.1.5 to 11.1.1.7. Afterthat installed 11.1.1.7.1 patchset also. Dashboard prompts were created by using hierarchy column. While applying hierarchy prompt i am getting below error Assertion failur

  • How can I add a new task to an online project from outlook

    At the moment, I can see tasks in outlook. I can modify them. But cant add a new one. Seems strange behaviour.

  • AppleScript GUI scripting problem.

    Hi All, I've created a script that will automatically open new document in Indesign CS2. But when i run the script i'm getting system events error as "NSReceiverEvaluationScriptError: 4". I tried following the instruction given in forums but still co

  • Protecting a folder on a site containing several pdfs

    Hi, I have a folder on my web site with several pdfs that I only want people who register with my site to see. However, if someone has the the url or correctly guesses at it, they can get at the entire contents of the folder. Is there a way to protec

  • Is it illeagal to sell a iphone clone?

    ive recently bought a phone of gumtree and not knowing it was a clone at the time, i thought i was in luck. but as i tried to put my sim into it, that wouldnt work and when i tried to text on it, the screen was hardly picking up the movement in my fi