Error 301

When I try to start my computer I get error 301 I have a Compaq Presario CQ62-238DX Notebook PC.I can't past this screen.
Thanks
DI

Hi,
The failure ID will either be a Smart or Disk Self Test failure - both would indicate that your Hard Drive is failing and will need to be replaced. Please call HP Technical support and check for the warranty status off the Notebook and get the part replaced. In case you unit is Out off warranty please let me know in case you need help in regards to part information.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

HP G62-b23SA - Imminent Hard drive failure - SMART Error (301)

My HP G62-b23SA reports a imminent hard disk failure. Hard disk test reports SMART Error (301). Advised to back up the system and contact HP support to enquire if Hard disk needs to be replaced or just needs repair. I have since backed up the system, should it be replaced?
This question was solved.
View Solution.

Hi,
The 301 Smart error would indicate that your Hard Drive is failing and will need to be replaced.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced. You can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know - include the size ( ie 500Gb ) of your current HDD.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Why can I no longer connect to iTunes store? Error 301..

Suddenly I cannot connect to iTunes. No idea why, apparantly it's error '301'. No firewall changes were made and iTunes is still permitted..

Hello Josh,
I was researching what may be causing you to not be able to access the iTunes store, and found a couple of articles that may help you out. The first is an article named Can't connect to the iTunes Store found here http://support.apple.com/kb/TS1368. There are steps to try depending on the Operating System you are running.
Also there is a more Advanced troubleshooting article called iTunes: Advanced iTunes Store troubleshooting found here: http://support.apple.com/kb/TS3297 that may also help.
And if you havent already, a great troubleshooting set of steps would be to restart the computer, router and/or modem then retest.
All the best,
Sterling

Pavilion G6 notebook error 301 on boot after windows 7 update

I installed Windows updates (111 of them, hadn't been done for a while)
On reboot the system hung on Windows screen. Managed to use system restore to go back to beginning of the month. Started ok. But tests showed software problem on hdd.
Updated anti virus, did a backup.
Then windows showed SMART hdd error.
Restored system to factory reset using hp system restore. Now hdd error remains.
In CMD window disk part list volume window shows HDD as healthy.
I never had any hdd problems before the update everything was working good. Only reason I did the update was so I could update msword to read docx files. Now my computer is completely broken :-(
What to do next? I'm thinking format the hdd see if that can help

Smiff
SMART HDD error (301) means it is time to replace HDD because it is failing or has failed.
Identify your model name, product number:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00033108
Test the hard drive using quick & extensive hard drive tests from System Diagnostics in BIOS by tapping away f2 as soon as you power on laptop.
Windows 7:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=in&lc=en&docname=c01443317
If the hard drive error shows up with failure ID, it means it's time to replace it with a new one.
Are you in warranty?
http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=us&lc=en
If so, HP would send you replacement HDD for free of cost.
Have you made Recovery media to reinstall the factory OS after replacement. If not, you may have to order them too from HP:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
Contact HP:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Back up all your data on to an external drive.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Data recover from a hard drive error 301

Can anyone advise me of how to recover data from a hard drive error 301. I have a pavilion dv7-4177 and i received the hard drive error code 301 two weeks after the warranty expired. I back up my data so I though but when tried to reload that data on a new hard drive it would not take. The damage hard drive will not load the OS now even in safe mode. Is there any way to retrieve this data from that hard drive.

Hi,
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Advice on recovery from hard disk error 301

Hi all,
I have a HP desktop PC, Pavilion HPE h8-1170d which is about 2.5 years+ old. The specifications are:
Intel Core i5 2500 with 8G RAM, 1TB SATA hard disk. I have recently installed a Radeon HD6670 graphics card as the original card gave problems. I have also upgraded to a Cooler Master 500W power supply.
Other details of my PC are listed here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02991104&tmp_track_link=ot_faqs/top_issues/en_u...
Recently, I experienced failure associated with the harddisk, indicating error 301. I managed to recover sufficiently (somehow) by using Microsoft's error checking tool for harddisk and now able to boot up and run. But I know I will have to replace it as it is a matter of time before the harddisk completely dies.
Before I go and buy a replacement harddisk, I hope I could know about the following:
1. I am not sure which version of SATA is my PC using. Can I just specify that I want a SATA harddisk, and not be concerned about their version of SATA ?
2. What is the best way to replace the harddisk from the software perspective ? Should I do an image copy from my current harddisk, if so, what is the easiest way to do this ? sorry, I have not done this before so need to ask such basic question. Would it make sense to connect the new harddisk first and then do the image ?
Thank you very much for any help !
smtan
This question was solved.
View Solution.

Hi smtan,
A SATA III, 6 GB data transfer rate disk will work.
Your PC model was introduced by HP in 2011. It may have SATA II but a SATA III disk will be backwards compatible. If this is true you will be limited to 3 GB transfer rates.
One other consideration is HDD size. You should probably limit the HDD replacement size to 2 TB. Your PC probably has a legacy BIOS and your HP Recovery discs may not work on a HDD exceeding 2 TB.
You have a couple of choices on moving or installing Win 7 on your new HDD.
You can clone the existing install from the original HDD to the replacement HDD. You will need to use either: free disk imaging software or purchase this software. I have heard good things about Macrium Reflect free and EaseUS free.
You can GOOGLE for other choices.
Install the disk imaging/cloning software on the source HDD. Install the new HDD in your PC.
Run the cloning software and follow instructions on cloning the operating system to the new HDD.
Please see this article for instructions on cloning one HDD to another.
This article may interest you. Consider purchasing an SSD replacement drive. The performance increase is unbelievable. Many SSD manufacturers provide cloning software with the purchase. You also need to buy the desktop kit version. This includes a 3.5 inch adapter for installing the 2.5 inch SSD in the HDD cage.
There is a downside if you go SSD. Your HP recovery discs may not work because the replacement SSD will be less than 1 TB. There are ways around this. Please see this forum post on installing Win 7 without a disc. Let me know if you are interested.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
HP Products:
810-150se Desktop
17t-j000 Notebook
H8 1380t CTO Desktop
560z Desktop
Errare humanum est.

Air App for Android - error 301: application descriptor missing

Greetings!
I've been building in Flash for a while but am brand new to mobile development. I'm currently trying to create my first Android app, a very basic game called "302 Saves The Galaxy". I don't intend to sell the game. I'm really just trying to learn my way through the publication process for future projects.
I've been able to get to the very last step in creating the apk file and I'm getting this error from the command-line process -
"Error 301: Application descriptor missing/cannot be opened"
Here's a screen shot of the command line window -
Here are a few other details about my process -
In Flash, I selected to publish to Air 2.0 because that's the only option I had (ie, no Air 2.5 option)
I've triple-checked and all spellings seem to be correct in my command-line syntax
I'm sure I'm missing something obvoius here. Any suggestions?
Thanks in advance!
Joel

Hi, Pahup!
Thank you SO MUCH for that tip! That solved the problem! Like I said, I knew it must be something pitifully easy that I was overlooking.
Anyway, I really appreciate your taking the time to respond.
Joel

General Export Error 301 while running syndication batch

Hi
When I run the syndication batch for the map of the Customer repository I get an error "General Export Error 301 ".Has anyone faced this problem.Is any configuration needed to be done.The syndication server is running fine..
Is there any blog related to this..
Points will be awarded for useful answers.
Thanks in advance

Hi,
You have given port no 2015. Are you sure that the port no of the repository from which you are going to syndicate data is correct.You can check the port no of any MDM repository using MDM console.For this you have to click on the mounted MDM server name.It will display the list of all repositories available on that server with their port numbers.Please confirm port no. is correct.
Also confirm that you are using client system code instead of the client system name.IN addition to this,also check
●      Is the target MDM repository loaded?
●      Is the port type Outbound?
●      Is the ports Processing property set to Automatic?
●      Is the port connected to a Syndicator or other MDSS?
●      Do the Login and Password values in the mdss.ini file match the Login and Password values for the repository on the MDM Console
You can try one more thing, Just give the command with <b>"-l" option</b>
Hope it will help you.Revert back if you have further queries.
Thanks,
Shiv.

Dv7 6b32us HDD error 301

I have a dv7 6b32us . I ran HDD test and error 301 came up on both quick test and long test. Does this mean I have to replace it? Any recommendation for the new HDD replacement?

Hi,
Yes, it does look like you'll need to replace the HDD.
The drive on the link below is an example of one that would be fine for your notebook.
750Gb Notebook Hard Drive.
The procedure to replace the Hard Drive starts on Page 59 of your Maintenance & Service Guide.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

WRT120N error 301

just bought first wireless router, when i insert CD and start setup, after a few seconds i get Error 301: internal error. i have rebooted and still no luck. I've tried going to 192.168.1.1, i got in one time but didn't understand half the stuff. now i can't go back into that page. feels like i've searched all the forums and can't find an answer, hope someone can help.
thanks in advance.

Do not use the CD, follow the instructions above. Call you ISP to find out how to configure their information.

Error 301: internal

when trying to install my software for my new linksys WRT160N wireless router I get Error 310: Internal and I do not know what it means? I followed the instructions to solve the problem but the problem remains.

I just bought the wrt160N to upgrade from from the wrt54gx2 becuase it was no longer broadcasting a wireless signal. When I start up the installation CD I get the error 301: internal error, which told me to turn off, ect. I did only to get the message again. I tried the reply in this thread, but was prompted for a username and password, which I don't know (I tried a few standard ones). Please help.

Error 301,303,305 on HP630

HP 630 won't boot up to home page says hard drive error 301,303,305 what can I do pls help

Hello pee-jay. I have included a link that contains troubleshooting for smart disk errors. As the documentation implies, there isn't too much troubleshooting that can be done. I will continue researching it, though. Please follow the troubleshooting and let me know what your results are. Also, when you respond, if you could tell me what computer you have, and the OS, that would be greatly appreciated.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?prodSeriesId=3688868&objectID=c0144350...
Mario
I worked on behalf of HP.

S.M.A.R.T Error 301 with New Hard Drive

I have an HP G62-358CA.
Recently I had been encountering the 301 Error when starting up the system,
I remeoved the drive and ran diagnostics and indeed the drive was failing, so i went ahead and replaced the drive with a new one. Problem is 2 days into the system's use, and the Error 301 screen pops up again. That and once booted into Windows, I get the error ...
"Windows detected a hard disk problem. Back up your files immediately to prevent information loss, and then contact computer manufacturer to determine if you need to repair or replace the disk."
The replaced hard-drive is a brand new WD Black drive. Is it possible that the mainboard or other component is failing on the system itself?

Hi BaronIgnatius,
I saw your post regarding the odd hard drive failure issue you are experiencing. It could very well be something else that is causing the problem. Since I don't know what operating system you are running I have included two links below that will show you how to test your hardware for failures.
Testing Hardware Failures Windows 8
Testing Hardware Failures Windows 7
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Getting error: (301)Moved Permanently when invoking partner link

Hello,
I've set up and tested a web service that will execute a command on a host. I then built a BPEL process that invokes this web service as a Partner Link. However, I always received the following error when running the BPEL process:
Invoke_Host (faulted)
[2005/11/04 14:17:57] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>HTTP</code>
</part>
<part name="summary">
<summary>when invoking endpointAddress 'http://web398.xxx.com:7780/itas/ws/host', (301)Moved Permanently</summary>
</part>
<part name="detail">
<detail>AxisFault faultCode: {http://xml.apache.org/axis/}HTTP faultSubcode: faultString: (301)Moved Permanently faultActor: faultNode: faultDetail: {}:return code: 301 {http://xml.apache.org/axis/}HttpErrorCode:301</detail>
</part>
</remoteFault>
Has anybody seen this error message? Any suggestions for finding out what's going on here?
Thanks

This is a standard HTTP error code, I am not sure what it means exactly, but maybe a network specialist can make sense of it.
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
10.3.2 301 Moved Permanently
The requested resource has been assigned a new permanent URI and any future references to this resource SHOULD use one of the returned URIs. Clients with link editing capabilities ought to automatically re-link references to the Request-URI to one or more of the new references returned by the server, where possible. This response is cacheable unless indicated otherwise.
The new permanent URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
If the 301 status code is received in response to a request other than GET or HEAD, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued.
Note: When automatically redirecting a POST request after
receiving a 301 status code, some existing HTTP/1.0 user agents
will erroneously change it into a GET request.

TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

when attempting a restore, as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Error 301

Similar Messages

Maybe you are looking for