Error 3014 (or other numbers) Fix. Read this and cure the pain!

I kept getting iTunes error 3014 right at the end of the firmware installation on the phone, so I spent hours troubleshooting using what I found on Apple's site and on the web.
The last thing I tried, and the ultimate solution for me was to go into the hosts file (C:\WINDOWS\system32\drivers\etc\hosts-open with Notepad) and delete the 74.208.10.249 gs.apple.com IP address-Saurik's server (IIRC, added to enable restore of 3GS after jailbreaking).
I thought I'd have to hunt down another gs.apple.com IP address and write it in place of Saurik's IP address, or that iTunes would write it, but neither occurred, and my iPhone 4 restored to new without a problem after deleting that IP address and saving the file.

I'm getting the same error message and my Iphone 4 is not working at all. I went through many web sites (including apple)but I couldn't find an answer yet. Can anyone help us? I already tried to use 2 different computers. First I got the error 1004 and now the 3014.
Thanks in advance

Similar Messages

Upgraded pc to ios7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls?

Upgraded pc to ios 7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls? I have tried many of the suggestions for the error code given. Im getting frustrated. I'm not a techno so would appreciate simple terms or ways of explanation. Thx!!

I have the exact same issue right now!

Error message- "LR has encountered problems reading this photo" after installing LR 5.6 on new computer and retrieving all contents from old HD from external HD.

Hi-
I got a new PC laptop, retrieved all old HD contents from my external HD, installed LR 5.6 (5.4 on previous PC) and when I tried to open up my old Lightroom catalog it has an error saying "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to this photo". I tried to open the catalog straight from my external HD with the same error message. I've read about four billion forum threads to try to figure it out- files do not seem to be missing as most threads indicate. The other threads suggest there is a corruption with the file, but I don't THINK that is the case. Are there any other suggestions? If the file is corrupted, how do I find out for sure? Have I lost all my edits??
Thanks for your help and time!
sarah

Hi-
I got a new PC laptop, retrieved all old HD contents from my external HD, installed LR 5.6 (5.4 on previous PC) and when I tried to open up my old Lightroom catalog it has an error saying "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to this photo". I tried to open the catalog straight from my external HD with the same error message. I've read about four billion forum threads to try to figure it out- files do not seem to be missing as most threads indicate. The other threads suggest there is a corruption with the file, but I don't THINK that is the case. Are there any other suggestions? If the file is corrupted, how do I find out for sure? Have I lost all my edits??
Thanks for your help and time!
sarah

Hi, I am getting an 'Error 4810 occurred at Sound File Read Open.vi' for the attached wav file (plus many other wav files). Any ideas?

Hi,
I am getting an 'Error 4810 occurred at Sound File Read Open.vi' for the attached wav file (plus many other wav files).
Any ideas?

No attachment exists.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

An internal error occurred while writing imported graphics in this document. The file has been saved

An internal error occurred while writing imported graphics in this document. The file has been saved, but has lost some image data. Please report this error to Adobe Technical Support.
How do i fix this, there are no images in the document
thanks
emma

We are running FM version 7.2b144 on MS Win xp Pro (32 bit), and I did not notice this until service pack 3 was installed. I believe I have found a work around to the situation and another contributing cause. If graphic files are placed directly in an anchored frame instead of importing by reference, the file somehow becomes misplaced. If you right click the graphic and open the Object Properties dialog box, and see the phrase "no referenced file" below Main Editor: Referenced File: in the lower left hand corner, this has happened. I found if I removed all graphics files without references and imported them by reference, the source file may then be properly saved. I am also using a program called CCleaner, which removes cookies, temp files, browsing history and the like from a system. If the program settings are chosen too aggressively, and the application runs when FM has a file open, this same error will occur, even if all files are referenced properly. I don't know if SP3 has some similar application which is now running in the background and causing this.
To summarize, if you want to retain SP3, I have eliminated this error by confirming the links to referenced graphics files and avoiding using 3rd party "cleaners" while FM is open.

When I try to use the Submit Form button on the Interactive PDF I created (IN Design CS6) I get this message. "There is no value in form field 'Program.' Please put in it before proceeding. What can I do to fix this and make the Submit button work?

When I try to use the Submit Form button on the Interactive PDF I created (In Design CS6), I get this message:
There is no value in form field "Program." Please put in it before proceeding.
How can I fix this and make the Submit Form button work?

Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.

I downloaded the Final Cut Pro X trial but my movie is 17 minutes long but it will only Share to Quick time 6:55 minutes. How do I fix this and export the full 17 minutes?

I downloaded the Final Cut Pro X trial but my movie is 17 minutes long but it will only Share to Quick time 6:55 minutes. How do I fix this and export the full 17 minutes?

Thank You. Im trying to export everything. I pressed command A and then did the Share button. Ill attach the screenshot please let me know if I need to change something.

TS3297 I downloaded a song but it did not download properly and only the first 5 seconds of the song plays. How do you fix this and get the entire song downloaded?

I purchased a song and when downloading there was an error. No error on the other 8 songs just one and now only plays the first 5 seconds of the song. How do you fix this and do the download again so the entire song is downloaded? Thanks!

Delete the song from your library and re-download it from the Purchases section of the iTunes Store.
http://support.apple.com/kb/PH12491

Firefox can't load a Siemens Gigaset network camera but IE8 can. There is an error in the code from the cam. Could Firefox ignore this and display the image anyway ? eg. with Ignore / Abort.

I run Windows-XP SP3 and I can't get the image from a Siemans Gigaset cam. There is an error in the cam code (a lacking rutine) . IE8 ignores this and displays the image anyway.
Is it possible to get a notification like Ignore/Abort/ Continue ???

Does the documentation for that camera, or for the software with it, say anything about ActiveX or about H.264?
If so, it isn't compatible with Firefox - it doesn't do ActiveX and it doesn't support H.264 in the HTML5 standard. Microsoft just released a plugin for Firefox that adds H.264 support to Firefox, but IIRC that only covers Windows 7 - not WinXP.

After i download ios 5.1.1 i cant install it there is msg tell me an error occurred installing ios 5.1.1 what can i do to solve this and install the update ( i have ipad 2 ) ?????

After i download ios 5.1.1 i cant install it there is msg tell me an error occurred installing ios 5.1.1 what can i do to solve this and install the update ( i have ipad 2 ) ?????

No codes on the error just msg in the center of the ipad tell me that without any codes :@

I am constantly getting error 1034 with no apparent pattern. This is under the latest version of Windows 7. Apparently I am not alone in this. When will this be addressed by Adobe?

I am constantly getting error 1034 with no apparent pattern. This is under the latest version of Windows 7. Apparently I am not alone in this. When will this be addressed by Adobe?

Please send the "MuseLog.txt" file from your "My Documents" folder to my attention along with a link to this forum thread at [email protected] The log should provide additional context regarding the error you're encountering. Thanks.

As of today, I can no longer or Excel. I get this message: You can't open the application "Microsoft Excel" because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted 2x

As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.

The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2)

HT1725 I am having trouble down loading a uv digital copy of a movie that i recently purchased. I keep getting error code (-50) has anyone else got this and how do you resolve it?

I am having trouble down loading a uv digital copy of a movie that i recently purchased. I keep getting error code (-50) has anyone else got this and how do you resolve it?

Hi,
Try the following steps:
1. Check windows updates.
2. Try the Microsoft Fix it in this kb to remove previous install completely:
http://support.microsoft.com/kb/2739501/en-us
3. Reboot.
4. Try installing again.
This seems helpful on the issue.
As always, thank you for your suggestion, Don:)
Regards,
Melon Chen
TechNet Community Support

TS3694 Keep getting error 3004, every peice of information on this webstie about the error code is absolutly useless.

Keep getting error 3004, every peice of information on this webstie about the error code is absolutly useless.

Have you tried on another computer connected to a different network?

-I have a password protected excel spreadsheet, how can I get my iPads and iPhones to read this and save it password protected?

I have a password protected excel spreadsheet, how can I get my iPads and iPhones to read this and save it password protected?

Documents to Go says that it, "Opens password protected Excel 97-2008 files", but does not say whether it can save them as "password protected".
This might work for you.

Error 3014 (or other numbers) Fix. Read this and cure the pain!

Similar Messages

Maybe you are looking for