Error 306 on win7 wired network, but no problem on laptop on same network, wirelessly

iTunes on a wired network is not working correctly. Internet connection in all other areas is working. When running iTunes, update notification works, downloads updated version, but I keep getting the error 306 message when trying to update apps.
The icons are all blank or have blue question marks.
On the same network, just wirelessly, my laptops iTunes works perfectly.
TCP/IP settings are identical on both.

Windows is absolutely passing the buck, and what is more, they are doing it in hopes that we will pass them more bucks- Windows 7 offered a program (for free) that was called windows media center. Windows 8 does not have this however, they will suggest
that it you pay an additional $99.99 to upgrade to windows pro and THEN another $9.99 for windows media center, all will be fine in the media sharing department....
UNTRUE-
I have Windows 8 and fresh out of the box, I got an app called XBox Smartglass with my new (and supposedly improved) OS, Windows 8. Therefore, it is an OS issue, not a manufacturing issue or an Xbox issue or where ever else you may want to stream your
media to.
However, for whatever reason, I have been able to share media without upgrading or paying anything with not one, but two Xbox's...It has something to do with permissions, sharing, devices, networks...but don't ask me what, I truly, truly wish I could help
everyone...however, I just do not want windows weaseling more money out of already high paying customers.
Sometimes I right click on a pie of media and I receive a 'Play To' option. Sometimes that options offers me to 'Play To' 'The Dark Box' or 'Xbox 360' or one but not the other or; my personal favorite- the 'Play To' option is gone and the only option
is to 'Open With' the various media outlets on my PC but not stream it anywhere...and there is no rhyme or reason or setting that makes this consistent.
I wish I could help more, but I leave you with this- It is possible, It does have to do with Windows OS, and you do not have to pass anymore bucks their way to make it happen...

Similar Messages

Message not working with gtalk on Mac in office network, but Gtalk is working in the same network on Windows machine

I was using Windows machine at my workplace (Office network), gtalk used to work absolutely fine.
Now I started using, Mac everything is working fine but my Gtalk account configured in Message is not working.
Gtalk is working fine as soon a connect to my home network.
I have tried configuring Nimbuzz and Psi , but of no use.
Please suggest.

Ok, after 40 minutes on the phone with the most patient and helpful Apple tech ever, the problem was fixed. Still not sure what did it though. Basically what I did was this-
Completely uninstalled iTunes, details here:
http://support.apple.com/kb/HT1224
I even removed all files associated with iTunes, which is further down the same page. Don't worry, you won't have to delete your music.
Then, I emptied the Trash and restarted the machine. I then checked for updates for every single App on my machine, upgraded to 10.6.4, and downloaded the iPhone SDK - not sure how this helped but anyway....
Then I restarted the machine again.
I then verified and repaired all permissions through the Disk Utility (Applications > Utilities > Disk Utility)
Restarted the machine...again.
I then downloaded the latest version of iTunes and installed it...and it worked.
Now, at this stage I was skeptical as anyone who has read my first post will know, restarted the machine previously left me back at the start. Well, I just restarted the machine and all seems good.
So, I'm not sure (neither was the tech actually hehe) which step specifically fixed the problem, so you might want to try them all.
If this doesn't fix your problem, my heart goes out to you! Perhaps try calling tech support-
http://www.apple.com/support/contact/phone_contacts.html

Net flix error code 114:503 ... but netflix work on laptop fine...

net flix error code 114:503 ... but netflix work on laptop fine...

Same issue here. Looking at the history of the forums, it looks like this happens every 1 to 3 months and is resolved within 24 hours. I have a PS3 with netflix streaming. I switch back and forth between the two when Netflix somehow screws things up on one or the other. If you call netflix, they say to call Apple or Sony. It's usually Netflix's problem. Glad they raised the price for a service that is so reliable (sarcasm).

Was able to create guest network but when I try to access guest network to test it, I cannot connect.

Was able to create guest network but when I try to access guest network to test it, I cannot connect. I tried iPad and iPhone.

The Guest Network feature will not function correctly if the AirPort Exteme is configured in Bridge Mode.
But unfortunately, Bridge Mode is the correct setting if you have the AirPort Extreme connected to a modem/router or gateway type of device.
So, is the AirPort Extreme configured in Bridge Mode as illustrated above?
Can you provide the make and model number of the device that you might call your "modem"?

I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated

I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated

Do you mean that you did a soft-reset ?
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't fix it then try closing Safari via the iPad's multitaskingbar and see if it works when you re-open it :double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
After trying the above you could also do a soft-reset (even if this is what you've already done it might be worth trying after clearing Safari's cache and closing the app via the taskbar) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Can not connect to wireless Internet with iTouch but I can with iPod on same network.

How do I fix the issue that my iTouch won't recognize my network but my iPod will?

What model iPod will connect?
Are yu saying that no networks appear in the iPod?
Is this the problem?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Is the router onlu set of 5 GHz N band? An iPod touch can only see/connect to 2.4 GHz band networks.
We need more information..

TS1398 My ipad will not connect to other wifi networks. It has connected to my main home network but will not connect to the booster network in my home (it has previously!) It will also not connect to other networks outside my home.

Hi
I just got new router and had to reset my network settings on IPad. Since then, my ipad will connect onto the main home network but will not attach to my extension booster (netgear) which is linked to the home network. It will also not attach to networks outside my home that it has previously worked with. i have reset the settings again, powered off and on again, updated to the latest IOS update, but nothing is working. Please help, as I can only use wifi in a few rooms in my house and i do not have 3G on my my ipad.

Did you try forgetting the network and starting all over again?
Settings>WiFi>Network Name>Tap the blue arrow>Forget this Network. Restart your iPad and then try joining again.
Try rebooting your router. Even though everything else may be connecting to your Network, it might help with the iPad. Unplug the router for about 30 seconds and then plug it in again.
Reset Network settings on the iPad?
Settings>>General>Reset>Reset Network Settings. You will have to start all over again, Tap WiFi in the settings, find your network and enter the password.

Remote for ipad, cant find songs, but my iphone can, on the same network

hi all
have a very odd problem, and apple cant seem to help me, i´m using the app called remote, to control my itunes music, from both my iphones, ipod touch and the ipad, they all connect to the same itunes music library and i can control them just fine, and choose the music and which airplay unit i want to listen to.
so far so good
but on the ipad, if i do a search for BEE GEES, it shows the artist name BEE GEES, but when i press the artist name, to view the songs, it says no songs, and that i should buy some from itunes.
but when i do the exact same search from either the iphones or the ipod touch, the search then again shows BEE GEES and when i press the artist, it shows the songs that i have with that artist.
the strange thing is that if i search for a song name on the ipad, like NIGHT FEVER it see´s the artist as BEE GEES and i can play it, i just cant seem to do a search by ARTIST, then it returns with no songs????
i have made a small video of this, that you can see here, to further explain the issue
http://gallery.me.com/blackbox100/100023/Remote%20problem%20iPad
i have talked to apple numerous times, but they cant offer me any explanation
i have tried to delete the app on the ipad, and reinstall it, but that didnt help, i have tried to hook up to another itunes directory, and that didnt help either?
any help would be appreciated

I have exactly the same problem.
I made some short "tests" and it seems that if the "Album" field on the info of a song (ID3 tag) is empty, it doesn't appear on the search result of an artist (only on iPad's remote app).
So, if you fill the "album" field of a song (on the "get info" option) then it will be displayed on the list of songs of the particular artist that you have searched for, on the "remote app" on the iPad.
As a fast solution (mostly a stopgap) I would recommend that you will open iTunes on your computer and highlight all the songs that have empty the "album" field on the "get info" window (ID3 tag). Then right click and choose "get info". In the "Album" field, type a space or let's say the word "unknown" and click ok. Of course if you know the real name of the Album, you will fill that field with the right information.
After that, all the tracks should be displayed under every artist in the iPad's Remote app.
Apple should give a solution on that bug. It is strange that there is no such problem on iPhone's Remote application, but only on iPad's.

New installation win7 32 bit but cPU high and laptop hot

I've upgraded an Acer from XP to win 7 home premium 32 bit, got an expert to install the drivers, and noticed the system was slow and the laptop got hot after a short while (30 minutes). Looked at CPU which varied between 9 and 65%, average about
45%, and while trying to determine the effect of changing from Aero to basic desktop, got it up to 100%. Removed most gadgets on the desktop. All to no avail.
Laptop doesn't feel reliable anymore. Didn't recognise an external drive twice (paging error) and it's generally unhappy.
I saw most of the CPU was being hogged by good old searchfilterhost.exe. I thought that had been resolved with win 7. I studied the various posts online, unclicked XML file (though it came back), stopped media player shared app, and reduced
the number of files and folders to be indexed. It began again. Laptop is now faster but remains warm and CPU is still far too high. I let index run in the hope that when it's finished, it will calm down. When it gets hot, I switch
it off. Search has now indexed about 30000 files (so has some time to go) but CPU is still high and interestingly, is not really affected by me using the laptop. It almost never reverts back to 0-5%.
I have ESET AV and had windows defender on. (Switched that off to see if it makes a difference). Scanned. Nothing of note found.
I don't wish to lose my laptop by overheating so am a little worried. I can disable windows search but I find it really helpful. Troubleshooter found nothing.
Would love advice. Posts re this issue tend to be old. My installation is new and I have relatively few apps and prgrammes. RAM is 3 GB. Slow processor but enough for win 7.
Another laptop with win 7 64 bit is just fine. Searching has been completed though.

Hi,
My bad. Apologize.
Windows search(searchfilterhost.exe) sometimes would take the CPU at a high usage, older posts suggested to disable it or change the start type to manually, or rebuild the indexing, which seems not to be so good as a workaround. And some
folks don't have the high CPU usage regarding Windows search with a clean install, compared with upgrade install from Windows vista to Windows 7.
Before going further, could we take a high CPU usage Capture in order to determine the causes? follow this:
Note: WPT is a tool which we need to install first.
WPT: WPR/Xperf: Capture high cpu, disk i/o,
file, registry, networking, Private bytes, Virtual bytes, Paged Pool/Nonpaged pool and/or application slowness.
Also please take a capture using process monitor(Also a troubleshooting tool):
Troubleshooting with Process Monitor
If possible please upload the results into skydrive and post the link here.
Thank you.
Best regards
Michael Shao
TechNet Community Support

IMac can see Mini's network, but Mini can't see iMac's network

Hi every nice person in there that have certainly helped a lot of pepople!
What is happening to me is when...
1.On each computer (Mini and iMac), I Open and login
2.On each computer, I Activate airport in the top-menu-bar
3.On the iMac, in Airport in top-menu-bar I Create a new Network - Name, Auto, Options WEP with working password, OK
4.On the Mini, in airport in top-menu-bar I Select the created Network and enter the WEP password
5.On the Mini, if I rapidly go to "Network", whom it's over "Mackintosh HD" in the sidebar of a Finder's window, I see two File flashing one time:
"My Network" and
"WORKGROUP".
But, when the Mini Create a network, it works perfectly.
Can you help?
iMac G5 and Mac Mini Mac OS X (10.4.6)

In order for a computer to show up in that network window, Personal File Sharing must be turned on the Network preferences (System Prefs > Network >Services). Once Personal File Sharing is turned on for both computers, give it a minute and they should both show up fine.
Good luck,
Jason

Working network, but airport utility unable to find any network devices

Hi
Can anyone help. I have a stable network which has been working fine for ages. I have an airport extreme + express(airtunes)X2. I was having problems with my printer and ran airport utility 5.3.2 which failed to find any of my devices, but my airport card has no trouble connecting to the network and internet. I also note that itunes no longer sees my remote speakers. I have re-booted everything with no change. All software is up to date on OS 10.5.6.
Any ideas?????
Iain

Hi,
I have the same problem. I'm very confused right now...I have one Mac and one PC that have both been able to successfully get online with the AEBS I have. A couple of hours ago, though, the wi-fi connection went dead with the PC. The AEBS has been showing a solid green light all this time, though. The Mac is online--and thank goodness because I wouldn't have been able to look or ask for help, otherwise! And our other various wi-fi enabled devices (ie my mom's iPhone and my iPod touch) have been able to get online, too. It's just the PC that doesn't want to work, for some reason.
I tried turning off the firewall to see if that would help anything. It didn't. I also tried rebooting my PC and that didn't work. Then I unplugged the AEBS for a couple minutes to see if that would help anything, but it didn't. And then I went into Airport Utility on the PC, but the AEBS isn't showing up at all. Yet when I go into Network Connections and view available networks through Windows, it sees my network and I've got full bars in terms of reception.
I'm very confused here. I really don't know what to do. :S Anyone have any suggestions? I'd definitely love to hear them.

Losing control of input in browser - 2 laptops on same network

Hello Forum,
We have had a sudden worrisome problem. It has apparently been an off and on problem affecting my partner's MacBook Pro (purchased Fall, 2011) for at least a month now. The first time it affected my system (MacBook Pro, purchased last Nov 2012) was last week.
When log into the browser (Firefox on her laptop and Chrome on mine), and attempt to enter text in the Search or URL bar, the computer makes an odd noise - rapid alerts, really - and enters a series of characters. On its own. Very rapidly. The keyboard functions are disabled, and you can't do anything else even if you shut down the browser. The only way out is to shut down completely and reboot from a cold start.
Last week, on my system, the browser started scrolling rapidly down the page on its own while I was working in a Content Manager API to update a client's website. Again, I had to shut down.
It also makes a staccato noise, like a multiple beep beep beep BEEEEEP alert while overtaking the browser.
On her laptop, we had a devil of a time even shutting down the other night. But this is not an issue every time. Nevertheless, the issue affects her system more than mine. I am going to install an anti-virus
When it happened to my computer also, we felt it might be network related. We run an iPhone 4 and an iPhone 5, a 2012 MacBook Pro and a 2011 MacBook Pro, and, very occasionally, an old Toshiba Windows 7 laptop on our wireless network. Our ISP assures us this issue is not network related.
I have an anti-virus program installed with definitions up-to-date and a clean full scan completed last night. My partner does not, believing Macs to be less susceptible to viruses than Windows systems. I will be installing an AV program in her machine.
Also...I am hearing that Macs are more vulnerable than they used to be, and that some of the new malware can hide and lurk, so it becomes undetected when AV scans are run.
I also have an Apple Care plan, by the way, if it is something else entirely -- our ISP suggested that conflicts can sometimes occur when you get updates.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

How to extend network so both Airports offer signal radius same network...?

I have a largely wireless network. ADSLN XModem speaks directly to an AExp located by the telephone point about 4m from the AExt located on my desk, through two medium/light resistance walls. This arrangement should be giving good coverage to the areas adjacent to both Airports but, for some reason, the AExp is only speaking to the AExt and the signal being dished out to the computers seems to be only coming from the AExt, not the AExp, which means that coverage is poor. If I take the worst case scenario with a G3 iBook and 802.11b Airport card, I can walk away from the AExt and nearer the AExp and signal drops at about 4m from the AExtr (through a plaster + lath wall) and about 2m from the AExt through part plaster part timber wall. I assume I have configured the relationship of the two airports wrongly though I cannot off hand see how. Any ideas? Drew

I assume that you are using WDS to wireless connect the AirPort Extreme base station (AEBS) and AirPort Express (AX).
Ensure that the option "Allow wireless clients on this base station" is selected in the setup of the AEBS.

Network Imac with other PC through the same network router

I have IMAC wireless and Laptop wireless and PC wired to the same router(NETGEAR).The PC do appear on my list of SHARED. However I can not connect to them. Get a msg that I have to check the IP address or check with ADMIN. Is it somewhere in setting that I have forgotten to click on or...?

It now works fine! I just restarted finally Was ti tired of trying it out. Now it works.

[SOLVED] Puzzled: Web site visible on network but not outside network

Edit: Ok, nevermind . . . somehow the problem has resolved itself. Perhaps my ISP was having a bad hair day or something.
I'm puzzled by this small problem I'm having. It is NOT a critical problem or anything, just something I'd like to solve.
I've installed the LAMP packages, set up a small MySQL database and made a very simple web interface for it. The web pages open fine on my main computer and all the other computers on our network, but it is not visible outside our network.
I am behind a router and I have forwarded port 80 to my local IP. I've set httpd: ALL, http: ALL and (finally) ALL: ALL: ACCEPT in /etc/hosts.
I got to thinking maybe my ISP (RoadRunner) is blocking port 80 requests to my home, so I changed the port to 9292 and forwarded that to my local IP. Still not visible from the outside.
I've tinkered with the /etc/httpd/conf/httpd.conf file (pasted in below) but still there is no outside connectivity, changing the listen settings and the server name settings. I can still access it fine from this side of the router. I've restarted the httpd service many times.
I've done all I can think to do to solve the issue. it is likely I am overlooking something very basic. Any help or ideas are appreciated. Below is my httpd.conf.
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 192.168.1.100:9292
#Listen *:9292
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
LoadModule php5_module /usr/lib/httpd/modules/libphp5.so
AddHandler php5-script php
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
ServerName 192.168.1.100:9292
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
Include conf/extra/php5_module.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Last edited by Rumor (2009-01-29 15:04:27)

You could try a factory reset of the home hub, as sometimes the config can get corrupted.
There is some general help on this page.
Help with setting up routers, wireless repeaters, TVs and printers, CCTV cameras, VOIP Phones
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Error 306 on win7 wired network, but no problem on laptop on same network, wirelessly

Similar Messages

Maybe you are looking for