Error 3200 on iphone 4 x2 when upgrading to five, now stuck in loop, iphone 3 error 1015, ******* apple ****!!!!

Getting sick of this crap and errors with Apple
Have cancelled my 2x 4s pre orders too
I have 2x Iphone 4's both get error 3200 when I try to restore, one loaded 5 but wouldnt restore my backup and claimed its not compatible, one is now stuck in a loop between the apple logo and a loading screen and I cant do **** as it wont restore, one is brand new the other is almost a year old
There is also an iphone 3g which gives error 1015 on any pc and wont update either
Really sick of this crap, Apple UK suck as far as service go and try and charge me £25 per iphone for help, Apples software screwed it up not me and now I can do nothing with any of the phones!!
Any ideas on *** i can do before I see if they can all blend and give Apple the finger once and for all

be patient. Try later. I had the same problem. I updated my iPod Touch to IOS5 and it is ok. Tried my iPhone 4 and it failed. tried 5 times kept failing. Finally it worked. I noticed a message in the iTunes window that said "Verifying iPhone restore with Apple". I think the network or their servers were busy and this was timing out.

Similar Messages

  • Help! Upgraded to Lion now stuck on white screen and won't finish rebooting! What do I do?

    Recently upgraded to Lion and tried restarting my computer this morning and it's stuck on the start up screen. Is there anything I can do?

    The hatter has some good approaches for long-term stability.
    To get around your current problem, try restarting while holding down the Shift key. This should run one pass of Disk Repair and start up with minimal extensions loaded. Log in and look around.Try a few things and see if your Mac seems "normal".
    Then see if you can restart into normal mode.
    Then decide whether you wnat to continue to be a guinea pig for testing Apple's newest software, or wait a while until it clams down a little more.

  • HT4623 I have the iphone 4 and update and is now stuck on the home screen where the apple comes I can do

    please i need urgent help

    Try to restore the device in iTunes. If it isn't recognized, try Recovery Mode. http://support.apple.com/kb/HT1808

  • How to fix error (-1) when upgrading iPad2 to iOS 6?

    hi all,
    how to fix error (-1) when upgrading iPad2 to iOS 6?

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • No upgrade to Studio now?

    I've been running Final Cut Production Bundle version 4.5 for some time now and have been thinking about upgrading to Studio 5. However I have noticed that the upgrade does not seem to be available on the Apple ONLINE STORE here in the UK anymore.
    I presume that this is because the new Universal version will be out soon but my question is...
    Does anybody have an idea on if there is likely to be a direct upgrade path to the new version from the Production Bundle or should I upgrade to Studio 5 now whilst I still have the chance via stock held at my local Apple reseller?
    Having only had a Mac for a few months I don't know what has been the norm in the past concerning skipping versions during upgrades.
    Brian

    Hi Brian
    Im in Edinburgh and I am about to buy the upgrade
    I am now waiting untill February to see what arrangements Apple UK will have for upgrades. The current price from Apple UK dealers for the upgrade from FCP to Final Cut Studio is £395 xVAT
    This pricing will change in February according to the Apple web site: -----
    How much does it cost to upgrade to Final Cut Studio?
    To make it easy to move to Final Cut Studio, Apple is offering low-cost upgrades from retail versions of Final Cut Pro, DVD Studio Pro 4, Motion 2, Soundtrack Pro and Production Suite. When you take advantage of this offer, you’'ll get the Universal version of Final Cut Studio when it becomes available.
    Application Price
    Final Cut Pro 5 £69 (UK)
    DVD Studio Pro 4, Motion 2 or Soundtrack Pro £139 (UK)
    Final Cut Pro 4.x/HD or Production Suite £139 (UK
    How do I get the Final Cut Studio upgrade?
    After February 1st, 2006, visit Apple.com again for complete details on the upgrade programme, including an order form. A Universal version of Final Cut Studio is expected to ship by March 31st, 2006.
    this is the link to the Apple UK Page
    http://www.apple.com/uk/finalcutstudio/topquestions.html
    regards
    Gary

  • IPhone cannot be activated (Apple ID was changed)

    My Apple ID was used on several devices which some of them are sold thereafter and give them the password, i know. stupid, there was no activation lock problem by Apple ID at that time. Somebody activated Find my iPhone and change the Apple ID and Email, i have no idea what they are now. So other devices which has been upgraded are now stuck at activation. I recreated that Apple ID but still it can't be used for activation. Is there anything can be done?

    Hopefully its a previous account. Cheers for your help.

  • Encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3

    I encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3
    I've tried upgrade iphone on three computers , the results are all the same.
    One of the computers successfully upgrade my ipad to 8.3.
    There are 2GB left on IPhone 5S before I perform the upgrade.
    It should be enough for iTunes to finish the process, right?
    But in the log, it says  "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
    why is that?
    Any way for me to continue the upgrade?  it seems it's almost done.
    Thank you
    the end of the log  is as below:
    [10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
    [10:36:29.0714] entering fixup_var
    [10:36:29.0714] entering update_var_directory_hierarchy
    [10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
    [10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
    [10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
    [10:36:29.0714] unable to copy directory: 2
    [10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
    [10:36:29.0714]
    [10:36:29.0714] ==== end of device restore output ====
    [10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
    [10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
    [10:36:30.0542] Restore completed, status:6
    [10:36:30.0542] Failure Description:
    [10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
    [10:36:30.0542]    Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
    [10:36:30.0542]       Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）

    Hello there, Kenduck.
    It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
    Get help with iOS update and restore errors - Apple Support
    Particularly:
    Check your security software
    Errors: 2, 4, 6, 9, 1611, 9006.
    Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    If you still see the error message, check for USB connection issues.
    Thanks for reaching out to Apple Support Communities.
    Kind Regards,
    Pedro.

  • Error 51 when upgrading iphone 6 to ios 8.1.3.

    looks like the serial number is lost when preparing the phone for the update. can't be verified by apple servers. tried to restore. nothing; still not recognized. tried dfu, same result. basically, i have a large, expensive brick

    getting error 51 when upgrading iphone 6 to ios 8.1.3. sorry, i repeated myself

  • Error 3194 when upgrading to ios 7.

    I receive error 3194 when upgrading to ios7 on my iphone 4 ( and I really don't know if it is 4s or just 4).  I am working though the itunes softward on my home computer.  It seems I am stuck in something called recovery mode.  I have tried a variety of suggestions found on the web (e.g., editing a "host" file, checking firewalls and connectivity, etc.) to no avail.  Any suggestions?

    The iPhone was either previously jailbroken (the DFU restore should have fixed that) or it has a hardware error. I would vote for the latter.

  • Receiving a -43 error message when upgrading to ios5.

    How do you get past error code -43  when upgrading to ios5 on ms vista??

    The only solution that I've found was here
    http://gizmodo.com/5849160/the-complete-guide-to-updating-to-ios-5&rct=j&sa=X&ei =bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CCoQ-AsoADAA&q=iphone+ios+5+error+-43+when+ba ckup&usg=AFQjCNGGVjsr_rky-tiplqdj-1fBfXofPA
    and here
    http://www.macworld.com/article/162925/2011/10/how_to_upgrade_your_ios_device_to _ios_5.html&rct=j&sa=X&ei=bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CC4Q-AsoATAA&q=iphon e+ios+5+error+-43+when+backup&usg=AFQjCNEBBPx-ymDJPGPd-sBy8TZ1dDTbeQ
    by:
    1. Doing backup.
    2. Using the Restore button and following the
    All works fine now and all the settings are there.
    BTW: it took over 2 hours to restre and that is with lots of apps and without songs, phothos and movies... that I removed before.Gizmo link above.

  • Error code 1667 when upgrading to iOS7

    i had error code 1667 when upgrading my iphone and ipad to iOS7 and found that i did not have sufficient memory. I freed up space on both devices and iOS7 immediately installed

    Yup. would be nicew to hear from Adobe on this. Ovcer the past several months I hav e tried to install the 12.0.4 update and keep getting the same error code others are getting.Wha
    zzup Adobe?>

  • Hello, When upgrading Iphone4 error-1.How to remove it? thank you

    Hello, When upgrading Iphone4 error-1.How to remove it?
    thank you

    This is a bad Hardware Error, most often means Baseband Problem. Maybe try to Restore Firmware with SIM Card removed. If you still have Warranty or AppleCare Coverage take iPhone to Apple for resolution.

  • I can not open iTunes. It started when an upgrade appeared. Now I get this message when I try to open itunes. can not find MSVCR80.dll     Then I get ERROR 7 (windows error 126)   I tried reinstalling iTunes but that did not help. Please Help Me!

    I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes   Error 7 (Windows error 126)   Please Help me!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99623)

  • How to transfer data & apps,When upgrading from a iPhone 3G to an iPhone 4 or soon 5

    When upgrading from a iPhone 3G to an iPhone 4 or soon 5
    How to transfer all phone number and apps and notes, pretty much copy my old iPhone to my new iPhone , all content and apps.
    Will it transfer my text messages also?
    Is this a nightmare or an easy task?

    Connect to iTunes and backup. Then when you receive the new phone restore from that backup.
    http://support.apple.com/kb/ht1766
    http://support.apple.com/kb/ht1414

  • I have changed my apple id, and its ok when i sync my Iphone with Itunes, but ON my Iphone still my old apple-ID is there. I can NOT buy things from Itunes or Upgrade anything now, how to fix this?

    I have changed my apple id, and its ok when i sync my Iphone with Itunes, but ON my Iphone still my old apple-ID is there. I can NOT buy things from Itunes or Upgrade anything now, how to fix this?

    I recently changed my email address and want to change my Apple ID account to match. I have created a new Apple ID to match the new account but now I can't sign into iCloud on our phones or computer with the old Apple ID. I can't make any changes on iCloud on our phones because it directs me to the old account, which I can't sign into. I also can't sign me in on my computer to make any changes. Help!!! Now I have two addresses and can't access the one that directly affects my devices. 

Maybe you are looking for

  • Pricing Procedure related query

    If I don't see an account key in front of the pricing condition in the pricing procedure - what does it mean?  How is it picking the account key that i can see in the document.  It is not a statastical condition type. Any help will be highly apprecia

  • Output Link and Command link problem

    I have this command link that I want to redirect to a certain url, a complete one with the Http://www.webpage.com.. and its value is Goto This Page.. lets say I want it to pass through a certain backing bean before redirecting how am i supposed to do

  • Printing Requirements

    Hi... My client has following printing requirements: 1.       Bank Payment u2013 vendor & others 2.       Bank Receipt u2013 customer & others 3.       Journal vouchers 4.       Purchase voucher (MIRO, and manual) 5.       Debit and Credit notes u201

  • Connecting inspire 6.1 to Xbox 360

    Hello, I want to connect my Inspire 6.1 6600 speaker system to my Xbox 360. What do i have to do? and what do i need? Message Edited by ssjf on 05-19-2006 11:56 AM

  • Bad date format in generated client API (weblogic server Workshop)

    Hello, i'm making web service client from oracle weblogic workshop. I have used "clientgen" Ant task to generate the client library. The WSDL indicates that certain fields are of type xsd:date.      <xs:complexType name="declarationType">           <