Error 3259 when attempting to home share

this is driving me nuts
a couple of days ago, my Apple TV ceased to connect successfuly to my itunes library - even though it could see the server.
Now, it can't see the server.  I have tried restarting home share to no avail. I have tried rebooting the PC, I have tried rebooting the wireless router. I have even disabled my windows firewall, but still doesn't work.  iTunes store can be accessed and used without any problems so this is localised purely to homeshare.
help!

Now, it can't see the server.  I have tried restarting home share to no avail. I have tried rebooting the PC, I have tried rebooting the wireless router. I have even disabled my windows firewall, but still doesn't work.  iTunes store can be accessed and used without any problems so this is localised purely to homeshare.
That's suggesting issues with the Bonjour service.
Is the firewall on the router allowing Bonjour traffic through the network?

Similar Messages

  • I get error 3259 when attempting to download podcasts

    I am using windows 7 and in the last week I keep getting this 3259 error. I have check for new updates and everything. I dont know where to go. Help please.

    Update to the latest iTunes software version.
    Try turning off your Firewall to see if the issue is resolved (this includes the built-in Firewall or a third-party Firewall such as Norton Personal Firewall, McAfee, Symantec, etc.). See KB #HT1601 for steps if using Windows.

  • Runtime Error displayed when attempting to access Forums

    I've IE 9 installed on a Windows Home Premium box. When I attempt to access the Technet Forums the following is displayed
    Server Error in '/Forums' Application.
    Runtime Error
    Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
    Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
    <!-- Web.Config Configuration File -->
    <configuration>
    <system.web>
    <customErrors mode="Off"/>
    </system.web>
    </configuration>
    Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
    <!-- Web.Config Configuration File -->
    <configuration>
    <system.web>
    <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
    </configuration>
    I'm running IE 9 on another PC (Windows 7 Pro) and it is able to acess the Technet Forums with no problem (I'm using it to make this entry).
    I've compared the settings on both browsers and they are identical. Why does IE on my Home Premium PC misbehave?
    Thanks in advance.

    Hi,
    What’s the result of other webpages?
    Can you access the thread link successfully?
    http://social.technet.microsoft.com/Forums/en-US/0c79aae9-3883-450a-bcd2-ba14ac5c8cd9/runtime-error-displayed-when-attempting-to-access-forums?forum=i
    You can test in compatible view for a try first.
    http://windows.microsoft.com/en-IN/internet-explorer/use-compatibility-view#ie=ie-9
    Alex Zhao
    TechNet Community Support

  • Caused error -3256 when attempting to connect to external speakers.

    I'm trying to connect to my Airport express using a PC running Windows XP home Edition SP 3 with iTunes 8.0.2 and getting the following error
    caused error -3256 when attempting to connect to external speakers.
    I've searched on teh internet and everything seems to relate to the Mac OS.
    Anyone running XP had similar issues?
    My AirportExpress is running FM 6.3
    Thanks
    Marcus

    After reading this discussion thread, I've seemed to have solved the problem for myself. I'm using the Trend Micro PC-Cillin Firewall. I disabled it and the airtunes worked. So, I went into the firewall settings. There's the ability to edit the profile and add to an exceptions list. You select the executable program, select incoming or outgoing, I accepted the other default settings and it worked.

  • Another "An error occurred when attempting to change modules" error

    Hello all:
    After using Adobe Photoshop Lightroom on Mac OSX trouble free for the past 6 months, I opened up Lightroom today and received the following error: "An error occurred when attempting to change modules." I had not made any changes in between when it worked normally and when the error started to occur. I beleive the last thing I did before this error occurred was to go into the Print Module.
    Other information--I keep all my RAW .NEF files on an external Firewire (800) 750 GB drive. This is on Mac OS X 10.5 running Adobe Photoshop Lightroom 1.3 and also with 1.4.1. I'm running an iMac 20" with dual-core 2.2 Ghz Intel processors and 4 GB of RAM. I have around 25k images total.
    When I noticed this problem, I was on Lightroom 1.3. I immediately upgraded to 1.4.1, which did not solve the problem. I have also tried many suggestions in the forums including uninstalling the application and removing the .plist file.
    I thought I had come up with a solution by creating a new catalog, then importing the former into it. While this seems to work immediately after the import process, as soon as I close it, the problem manifests itself again.
    More details that may or (likely) may not help:
    - Going to the Develop and Print Modules gives me no problems. However, when I click on Library, Slideshow, or Web, I see the error.
    - I upgraded my Mac to the latest patch level after observing this error to no avail.
    So it looks like my choices are to create a new file and reimport every single time, or lose all of the work I've done for the past 6 months on thousands of images.
    Can anyone please help???? I promise to post the solution when we fix this darn thing so others may benefit. I'd be happy to run through any troubleshooting that y'all would suggest outside of switching to a Canon.
    Thanks!!!!
    Matt

    I'd first check for the existence of a file ending in .lock, which should be present when LR is in use, but if it exists when LR is quit, it can cause problems, and should be deleted.
    Please post back your results.

  • I have Lightroom 5 installed on my MacBook Air but when I try to open the program I receive the message "An error occurred when attempting to change modules".  I uninstalled, emptied trash and re-installed but I continue to get the same message.

    I have Lightroom 5 installed on my iMac which I downloaded (uploaded?) to my MacBook Air (via wi-fi) but unlike the iMac, I'm unable to use the program on the MacBook Air.  When I open the program on the iMac and click 'file', (as people using the program would know) there are 21 options - import pics, export, etc, etc - however, in the version on the MacBook Air, opening 'file' gives me four options - New Catalogue, Open Catalogue, Page Setup and Printer - and with that comes the pop-up message "An error occurred when attempting to change modules".  Any ideas please?

    A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions.  You might try doing a repair permissions for your user and/or run LR as an administrator user.  I am a PC person so cannot tell you exactly how to do that.
    https://forums.adobe.com/message/1457020

  • I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore, now my ipod is clear. I have tried disabling my antivirus, no luck.

    I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore. Now my ipod is clear, when I turn it on I get the "Connect to itunes screen", this never goes. I have tried disabling my antivirus, to allow me to restore with no luck.
    When I go into itunes I get the message - itunes has detected an ipod in recovery mode. You must restore this ipod before it can be used with itunes,
    how am I supposed to do this ?
    I would rather take the ipod to someone to do the restoration - I still have itunes with all of my downloads on my computer, I dont want to risk losing this as I can re-install onto my ipod when it is sorted.

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
    Above from:
    http://support.apple.com/kb/TS3694
    It may be more than you security software.
    Do you have access to another computer you can use to restore the iPod to factory defaults/new iPod?

  • Error message when attempting to view the video.

    When attempting to watch a video posted to Facebook or on a forum, I get an error message when attempting to view the video. "An error occurred while processing your request. Reference #50.8dd8d3d1.1354457866.1cac8e50". I'm able to view videos via YouTube.  The error seems to occur when video are embedded in a post/thread.

    I was hoping someone could provide some help.

  • Error message when attempting to use scanner Canon model MP610

    Error message when attempting to use scanner Canon model MP610, any one have any fixes, suggestions?

    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, empty trash, reboot when complete.
    For the other problems...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?

  • Error message when attempting to install itunes    0x80070BC9

    Error message when attempting install of itunes   0x80070BC9

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Error message when attempting to run aam

    I am encountering error message when attempting to run aam - Please connect to the internet, then try again when I am already connected

    Please see Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for common resolutions to these difficulties.

  • An error occurred when attempting to change modules.--when i log in as a guest program works fine but when i log in onb my account that pops up

    An error occurred when attempting to change modules. this comes up on my account on my mac but not when guest account  ?

    I fixed the problem myself, no response in chat nor phone (1 hour in hold an no answer) here's the link, step # 5 saved me! Here's the link seems to be a very common problem, hope it works for you! Error changing modules | Lightroom

  • Lightroom 4: An error occurred when attempting to change modules.

    I downloaded Lightroom 4 a few days ago and installed it on my MacBook Pro. Everything worked great. I thought it would overwrite Lightroom 3, but it didn't. So Lightroom 3 is still installed, but I haven't opened it since I installed Lightroom 4.
    I downloaded Lightroom 4.3 this morning and installed it on the same MacBook Pro.  Using my MacBook Pro and a second monitor, I opened Lightroom 4.3 and worked on some photos. Everything worked great.
    Then I began watching a slideshow in the Lightroom 4.3 slideshow module on the second monitor with my MacBook Pro in the library module. During the slideshow I clicked on the slideshow module on my MacBook Pro and got this error message:
    An error occurred when attempting to change modules.
    Now I can’t get into the slideshow module. I just get the error message.
    I moved the preferences file to the trash and reopened Lightroom 4 but lost color labels, so I put it back in the preferences folder.
    Thanks for your help

    I called Adobe and let them fiddle online with Lightroom on my MacBook Pro. The Adobe tech claims I have a corrupt permissions file. He told me to contact Apple and have them rebuild my permissions file.
    When I contacted Apple, the tech said to startup my MackBook Pro with the option key held down until the first screen appears. Then click on: Recovery HD, arrow, Language, Disk Utility, Macintosh HD, Repair Disk Permissions.
    I did this three times, but some permissions were not repaired. Another Apple tech then suggested I bring my MackBook Pro to a Macintosh authorized repair shop, and have them repair my permissions file. I asked if I can buy Norton Utilities or a similar program and do it myself. The Apple tech said yes, but an authorized repair person will know which permissions to repair and which ones not to touch.
    Unless someone on this forum can tell me how to do this repair myself, I’ll get it repaired next week. And, I’ll post the results as soon as I can.

  • An error occurred when attempting to change modules Lightroom 5 CC

    I've seen other users pose this question but haven't seen any solutions that work for me.  I get the error: "An error occurred when attempting to change modules" when I open up Lightroom 5 on one user, but on another user it opens up fine.  I've tried moving and trashing preferences, uninstalling and reinstalling the program.  It's the same whether I open an existing catalog or try to open Lightroom while creating a new project.  Any help would be greatly appreciated.  This occured after updating to Mavericks on a 2011 iMac.  All other Creative Cloud apps seem to have installed just fine.

    Hi 99jon,
    Many thanks for that. Had been going through this list yesterday and now again today:
    Ref  Solution 1: Lightroom is at its latest update
    Ref  Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
    Ref  Solution 3: Lightroom doesn't allow me to do anything after the error message appears
    Ref  Solution 4: don't have any Nik Software plug-ins
    Ref  Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
    Ref  Solution 6: I don't have a different user account on my mac.
    Not sure what else to do.

  • An error occurred when attempting to change modules.

    Loaded LR on my iMac, tried to copy & use a catalogue from W7 P/C. Now get "An error occurred when attempting to change modules."  when opening LR. Tried a variety of on-line suggestions, HELP. NB too much hassle with all the other apps to start a new user with such as Adobe and Microsoft.
    George

    Hi, I¹ve been through it again to ensure I¹ve not forgot things. Completely
    removed Lightroom and all files I can find, etc and reloaded. Some tedious
    result. Step 6 is too time consuming at the moment for me, too many things
    on the go since I¹m about to go on holiday and on return I shall need
    Lightroom on this iMac. Any clues? This iMac had Mavericks from new,
    uploaded to Yosemite and then loaded Photoshop CC, Lightroom etc and get
    this damned problem.
    Reading around the web I¹m not the only one with this issue, to suggest a
    new user a/c is a soft option without resolving the issue.
    I hope an expert from Adobe can resolve this,
    Regards, George (retired IT Manager and IT Systems Project Manager)

Maybe you are looking for

  • Change error message to warning message

    Hi Experts, How can we change error message to warning message. Eg: T-code : SE91 shows the message. If i want to change message class PG, message no 26 error to warning what will be the process. Regards Ratan

  • N9 Font too small!!

    I received my N9 three days ago and i am so disappointed at the font size. The fonts are way too small and totally unacceptable! I sold my Nokia 700 because the font on that device was so small i just couldn't use it and bought the N9. I figured the

  • How do I save aperture slideshow onto dvd

    I have just created my first slideshow on aperture and now want to burn it to dvd.  Can't find how to do this.

  • Saving a file as a Photoshop EPS

    My printer would like me to save my file as a Photoshop EPS file, with Preview setting to JPEG and Encoding to JPEG (Maximum Quality). I am working in CS4. When I save as for the EPS, I only get two TIFF options for preview settings. How do I get a J

  • I'm trying to reset my password but I'm not receiving the authentication email. Help?!?

    As it says in the title. I only have one email address (which is also my Apple ID of course) so I'm certain that these emails aren't going to another address, just not arriving at all. Have tried multiple times.