Error 3307 when importing build file in Essbase

We have a level-based dimension build file, which is a CSV file with 5 fields and some 13,000+ rows. We are getting 75 errors in the .err file when importing the file using a load rule. An extract of the .err file is as follows:
\\Record #4242 - Incorrect Parent [G] For Member [G4S] (3307)
C057038317,C057038317 - G4S,G4S,G,Other Accounts,Customer Group,Customer
\\Record #11502 - Incorrect Parent For Member [UG Ltd] (3307)
C043678386,C043678386 - UG Ltd,UG Ltd,U,Other Accounts,Customer Group,Customer
\\Record #11503 - Incorrect Parent [U] For Member [UG Ltd] (3307)
C044178034,C044178034 - UG Ltd,UG Ltd,U,Other Accounts,Customer Group,Customer
I have double checked the existing members and there are no duplicate member names / conflicts here. Can anyone please suggest what the issue might be? I found a similar post at the below but this was not fruitful:
Incorrect Parent Error during Dimension build type "Add as child of"

This typically means the member was added to the outline already to another parent either prior to the dimension build or within the dimension build and in your dimension build settings you do not allow moves of members.
For example your member G4S If you look in your outline, I'll bet you find it (either as a member name or alias) and its parent is not "G"

Similar Messages

Error message when importing motion files into FCP

In FCP.
I choose a clip/clips in my sequence. Then choose send to motion project and follow the directions from the training dvd.
By unchecking (embed "motion" content) then save the file with a different name. Then continue with making my graphics over the video clip/clips.
When I am done I then shut off the video layer of the clip in the motion timeline. Then I save the project. Then close Motion and try to import the motion project in FCP.
When I try to import, I get an error message stating "File Error: 1 files(s) recognized, 0 access denied, 1 unknown."
I go back to the training file to try the same procedure and it works fine.
Go back to my own project and it doesn't work.
Any ideas? Anyone?
I have a Mac Pro 2.66GHz / 5 gigs of ram / 512 vram ATI graphics card
Also working with universal software for FCP studio.
Intel 2.66GHz Mac OS X (10.4.9)
Intel 2.66GHz Mac OS X (10.4.9)

OK???
Don't know what the deal is. But I made a new sequence in my project and copied my other sequence with in the new one and then tried to do the whole clip step for step process of send to motion and importing back in and it worked!!!!
I check all the listed settings of my sequence in my browser window and both the old sequence and new sequence are the same.
I am happy that I can move on with my work, yet I am frustrated with the fact that I am not sure exactly what the problem is.
Thank You Again!

Quicktime error -37 when importing video files

Anyone know how I can import my videos successfully? Whenever I try to do it now, they don't show up and i get the error message.

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Otherwise, please provide additional details...for example:
What, exactly is the true file format? Not simply the file extension, but the true format?
Does the file extension match the true file format?
Where was the file created?
Does the file work on other devices?
Do other format video files work OK on your device?
What is your exact OS level, and what exact app are you using to try and play the file?
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error when importing EPS files in Publisher 2010

Whenever I attempt to insert an EPS file (possibly other image types as well) into a Publisher document I get a prompt asking for what type of file the source is and then this error:
"An
error occurred while importing this file."
This is running as a Citrix Published Application running on Server 2008 R2 and I've found that this does not happen outside of Citrix. If i login directly to the server via RDP or right from the console I do not get this issue. I've posted in
the Citrix Forums and it looks like this is something to do with MS Publisher and not being able to use the Explorer shell.
http://forums.citrix.com/thread.jspa?threadID=307437
Researched this error and found this article:
http://support.microsoft.com/kb/224744 (This is unacceptable since the file needs to be in EPS format to keep functionality)
There was another article but I cannot find it for the life of me at this time but it suggested that you uninstall and reinstall Office or repair Office.
I did both with no luck.
I am able to get Citrix to open up publisher with the shell by initiating this command:
explorer.exe /root,D:\Program Files\Microsoft Office\Office14\MSPUB.exe
With this command firing up Publisher I'm able to import EPS files with no problem. However I cannot pass an argument to this command so double clicking documents in our Citrix portal do not open up the document but rather just opens up a blank Publisher
file. So this isn't a good "solution."
I should not have to make this command to just be able to import images as a workaround. Anyone run into this in their Citrix environments? Microsoft, do you have anything that can be tweaked with Publisher to allow this to work as normal in
a Citrix environment?

I was able to get a workaround for this. I made a .cmd and put this into it:
if [%1]==[] explorer2.exe /root,D:\Program Files\Microsoft Office\Office14\MSPUB.exe %1
if [%1] NEQ [] "D:\Program Files\Microsoft Office\Office14\MSPUB.exe" %1
You will need to change your paths to your MSPub.exe and if you are using explorer.exe change that as well. We use explorer2.exe since we've found issues with using the original explorer.exe.
Once you have that CMD file made. Save it to your Xenapp boxes in the same location and then point your published app to that file to launch Publisher.
This worked for us but I'm not sure if it will work for anyone else but give it a go and let me know.

Oracle error 0603 where importing dmp file

hi,
i have an error message when importing a dmp file.
$ORACLE_HOME/bin/imp system/xxxx file=$PIPE_NAME log=$FIC_LOG commit=y buffer=4194304 fromuser=user touser=user
. . Import de la table "RACLEGL" 471445 lignes importées <
IMP-00017: Echec de l'instruction suivante avec erreur ORACLE 603 :
"CREATE UNIQUE INDEX "RAPRIK_CGL" ON "RACLEGL" ("CGL_RENTITY" , "CGL_CODE" ,"
" "CGL_ORG" , "CGL_LINE" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITI"
"AL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "IDX_1" LOGGING"
IMP-00003: Erreur ORACLE 603 rencontrée
ORA-00603: La session de serveur ORACLE s'est terminée par une erreur fatale
IMP-00017: Echec de l'instruction suivante avec erreur ORACLE 3114 :
"BEGIN DBMS_STATS.SET_INDEX_STATS(NULL,'"RAPRIK_CGL"',NULL,NULL,NULL,470059"
",2380,470059,1,1,204641,2,0); END;"
IMP-00003: Erreur ORACLE 3114 rencontrée
ORA-03114: pas connecté à ORACLE
IMP-00003: Erreur ORACLE 3114 rencontrée
Thanks for your help

I tried reinstalling imp.exe and exp.exe using the Oracle Universal Installer. I checked the import/export utility, but the OUI removed THE ENTIRE developer suite ;-(
So, I decided reinstalling the Oracle and the developer suite from scratch! The installation was ok and I could see the imp.exe working fine during the repository building.
I also did a lot of experiments and some results follows:
I can export and import an application system if I use the SAME user to export and import the .dmp file;
I can import a .dat file exported by another user sometimes
But, my main trouble still exists: I cant import .dmp or .dat files from another user that used exp.exe 8.xxx.
The symptom when I try this last option is the freezing of imp.exe like the follow example:
Import: Release 10.1.0.4.2 - Production on Sßb Fev 18 21:15:51 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Conectado a: Personal Oracle Database 10g Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Arquivo de exportaþÒo criado por EXPORT:V10.01.00 via caminho convencional
AdvertÛncia: os objetos foram exportados por ALUNO; nÒo por vocÛ
importaþÒo realizada nos conjuntos de caracteres WE8MSWIN1252 e NCHAR AL16UTF16
. importando objetos de ALUNO para ALEXFM
. . importando table "XTSYS_EXPORT_OBJECTS" 1 linhas importadas
. . importando table "XTSYS_IMPORT_IRID_MAPPING" 68 linhas importadas
. . importando table "XTSYS_IMPORT_IVID_MAPPING" 68 linhas importadas
. . importando table "XTSYS_RM$REPOSITORIES" 1 linhas importadas
. . importando table "XTSYS_TABS_EXPORTED" 14 linhas importadas
The imp.exe always freezes at xtsys_tabs_exported
Any ideas?
Regards, Alexandre

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error message when importing CD's into iTunes.

I've just started getting an error message when importing audio CD's into itunes. +"Error occured while converting the file "........". The disk could not be read from or written to."+ I've been importing CDs for years now and this just started happening last night. The disk image shows up on the desktop, itunes opens and recognizes the disk and searches the database and finds the artist/track names/album etc. Then when I click the import button, I get this message. If I click on the disk image in the desktop and click on a specific file it will play through iTunes. No new changes except for maybe downloading the latest iTunes update. Any suggestions? Thank you very much in advance.

Iron-Mike wrote:
Every time I import a CD, mp3 is louder then AAC. It's just every so often if I try AAC the volume will be really low. Like barely hearable. Maybe it has to with the fact the CD was released long before AAC format was around? Something to do with compatibility maybe?
Iron-Mike, MP3 and AAC were both invented well after CD audio and both algorithms are well aware of CD format. Make sure you have "Soundcheck" settings turned on both for iTunes playback and for CD burning. iTunes Soundcheck is supposed to normalize the volumes in spite of variations in the files. Many people have noticed that they don't really work very well, but having them on is better than nothing.

Itunes Crashes when importing Music File or Folder on Windows 7 64-Bit with Itune 10.5 and update ios 5

Itunes crashes when importing Music File or Folder ever since i updated it yesterday

You can try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). You may get a more useful error message as to which component has problems.
tt2

Part of path lost when importing autogenerated files

Hope someone can help as can't find anything on the forum about this.
Have two Framemaker 8 books, one of which contains all the files for a future publication, including LOT, LOF and IX. This is the full publication but most of it is still heavily in draft. The second book represents the first release of the publication and has only a small subset of agreed content. The idea is that the publication will grow in time.
The second book is in a subdirectory below the directory containing the first book and the full set of files. It has its own LOT,LOF and IX. It also links up to a few of the files above, the ones that are in the first release. The LOT, LOF and IX contain contain references only to these few content files. Have done it this way rather than put everything in one directory, as there will be a number of subsets, with multiple PDFs produced for review from each before the finalised PDF containing the current content to be released at any one time, and don't want them all in the same directory with the management problems that would introduce, and risk of people selecting the wrong version of a LOT, LOF etc. The content files with the actual text in are not duplicated in this subdirectory; the book just links to them in the directory above itself.
All was well on one PC but needed to work on a second also. This second one has a different directory structure and it isn't possible to change it because of the different policies in place. So copied the main directory and the other subdirectory beneath to the new PC. All appeared OK; the lower level book found the files above etc.
To clarify the structure on the second PC is this:
\dir0\dir1\dir2\Content directory - place where the first book plus the preface, glossary/index and the other files in the draft book - the main body
..dir0\dir1\dir2\Content directory\dirA - place where the second book and LOT, LOF, IX are for the book to be published first (the .. represents some other directories from the root)
(On the first PC, it was \dir0\dir1\Content directory\ and dir0\dir1\Content directory\dir A - and this is the shorter path from the root)
When trying to generate the PDF on the second realised something had gone wrong and then found that the problem began in FMkr. The symptom is this:
The LOT, LOF and IX autogenerated files are fine within the book, their links can be clicked and they go to the source files (in the directory above). BUT these files aren't part of the actual publication. The LOT and LOF are embedded in a Preface (one of the files in level above) and the IX is embedded in a Glossary and Index file (ditto). When these are imported into the Preface or Glossary as appropriate, whether by reference or by actually including the file, the result is the same - the links become non clickable and an error is saying that the file can't be found. The path is partly truncated - it excludes the directory where the files actually are.
So for a link to the Introduction.fm file, FMkr says it is looking for it as ..dir0\dir1\dir2\Introduction.fm and not ..dir0\dir1\dir2\Content directory\Introduction.fm where it actually is.
This occurs even if the whole structure is copied elsewhere to a place higher in the hierarchy. It isn't possible to reproduce the structure on the first PC because of the configuration of the second PC. Have tried taking the LOT etc. out of the second book then regenerating them from scratch - they are fine, the links in them are fine, but when imported into the other files, the links miss out the directory which actually holds the source files where the links point to. Must emphasise this did not happen on the first PC.
Any ideas gratefully received.

Thanks Sheila, have now overcome my problem with editing the post (duh!)
Hope the below is clear enough as cannot send an actual screen shot. Have discovered that the number of directories above in path is a red herring because the problem now happens back on the original pc when the book and files are copied back to it.
Have tried creating a test book with only the index, glossary/index and one content file linked from directory above (i.e. test book at dir c level) and it is OK in the autogenerated index but then does the same truncation when the index is imported into glossary/index, i.e. looks for the source file in dir A. If the source file is copied into the test book directory, the file removed from book and then the local copy added back in and the book updated/import redone, the links work. so it will find it if the source files are in the same directory. However, this always worked before with lots of test runs and a few real reviews too.
Subject: FrameMaker General Discussion Part of path lost when importing autogenerated files
It would be really helpful if you might do a screenshot of the File Manager hierarchy of folders and insert them into your posting, maybe use callouts to annotate the various significant levels -- a visual would really, really make it much easier to interpret what you're describing.
>
Sorry, not coming out very clear compared to viewed on PC. Directories are A, B, C - Dir A caption "The Directory above the content directory. Links in the subset book in Directory C look in here after they are imported into other files in the subset book"
Directory B says "Directory B, the content directory, with introduction, glossary/index and other content files, plus main book, main index, main LOT, LOF. Some of the content files in here are also linked to from the subset book in Directory C"
Directory C says "Directory C containing the subset book with its own index, LOT, LOF, plus links to introduction, glossary/index and a couple of other files in Directory B. The links to files in Dir B work in the autogenerated LOT, LOF etc, but not when imported into content files (linked files in directory B) although this used to work. They now look for the content files in Directory A instead"
Hope that makes it clearer.

IPhoto 9.2.3 crashes when importing jpeg files in OS 10.6.8

iPhoto 9.2.3 crashes when importing jpeg files in OS 10.6.8. Has worked perfectly until recently. Camera: Sony.
Help! Thanks

Not sure if this is it... found this in CrashReporter
Process:
SystemUIServer [154]
Path:
/System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer
Identifier:
com.apple.systemuiserver
Version:
1.6 (298.17)
Build Info:
SystemUIServer-2981700~7
Code Type:
X86-64 (Native)
Parent Process: launchd [149]
PlugIn Path:
/Library/Application Support/iStat local/extras/iStatMenusDrives.menu/Contents/MacOS/iStatMenusDrives
PlugIn Identifier: com.iSlayer.iStatMenusDrives
PlugIn Version:
??? (2.0)
Date/Time:
2012-07-25 12:15:25.589 -0400
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:
239771 sec
Crashes Since Last Report:
1
Per-App Interval Since Last Report: 3525 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:
4C22FC88-8025-4C80-AEF8-A730365FC6C5
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 3
Application Specific Information:
abort() called
*** Terminating app due to uncaught exception 'NSGenericException', reason: '*** Collection <NSCFArray: 0x1006cb6a0> was mutated while being enumerated.<CFArray 0x1006cb6a0 [0x7fff70a29ee0]>{type = mutable-small, count = 2, values = (
0 :
Name = (null)
Mount = /
UUID = B059E233-0145-3B10-842A-1D92DEB14682
Icon = NSWorkspaceIcon
BSD = disk0s2
Type = Physical
Mounted = 1
Ejectable = 0
Boot = 1
Whole = 0
Enabled = 0
1 :
Name = (null)
Mount = /Volumes/debramullins
UUID = DE000000-0000-8305-6600-000000000000
Icon = NSWorkspaceIcon
BSD = afp_2iqwWi0v4JKK3BWuNP2Eh7vn-1.2e00000a
Type = Network
Mounted = 1
Ejectable = 1
Boot = 0
Whole = 0

When importing a file from a folder

when importing a file from a folder it appears in the organizer as a exclamation mark but no photo. can anyone help i use elements 9

Hi there,
Digging up an old thread slightly, but is this still definitely the case? Last week double-clicking a folder definitely just opened up a folder for me to explore its contents, but now I'm constantly accidentally importing huge folders into things like After Effects and Mail... it's very annoying!
If there's a fix I'd love to hear it!

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

I did copy it to my desktop, but it still won't let me open it. I think the file on the disc might be corrupt or something like that though the cd itself checks out fine as far as viruses go. I was able to verify the disc, but that's about it. My husband tried it on his iMac and we have the same issue. It's unzipping the folder, but won't let us open the folder on both the Mac Book Pro or the iMac by double clicking, going to file/open or right clicking. It just keeps saying the same message as I posted above. I think I'm just going to have the client put the pictures on either a memory card or a USB memory stick so she won't have to compress the files for zipping purposes. It's been too frustrating trying to open this folder on this cd she gave me. She said she created/zipped the cd on her Mac Book Pro but it sure won't open on mine.

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

Hi
The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
(Or just set the fader manually in MS)
CCT

When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size?

When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size from canon 5d mark iii, in older versions I used to be able to import the files as larger images. It use to have a number of options for the images size. The option now is smaller than the maximum size used to be.

You know what - I'm sorry
I'd had a crazy long all-nighter session sorting out images for a client, then decided - when I should have simply gone to bed - to set up the new photoshop. At the very start I made a silly mistake, tried to sort it out then decided to call it a day, responding to your remarks with the problem still in my head but feeling more and more tired.
Responded again to your comment earlier with the problem still in my head but not in front of me on the screen - however with a fresh head I just turned it all on, opened up PS and today could instantly see what was going on - Oops!
Thank you for being patient with a sleep deprived photographer who must have been getting annoying yesterday
I am officially embarrassed
M

FAQ: How do I troubleshoot audio issues when importing .MTS files?

Hello. The link FAQ: How do I troubleshoot audio issues when importing .MTS files?
does not work, and i need the answer please. My imported MTS clips are not playing back audio because it seems that no audio imported with the video. Thanks, Don.

Hi there
Audio plays when the object with the audio assigned appears. This is why you hear it when the Button appears.
Try assigning the audio instead to the object that appears when you click the button. Perhaps the caption.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Error 3307 when importing build file in Essbase

Similar Messages

Maybe you are looking for