Error 34 when trying to create a DVD?

I have produced a HD project in iMovie but when I try to create a DVD I get the error message 34.

Hi
Error -34 = Disk full error
How much space is there on Your Boot/Start-up hard disk ?
My minimum is 25Gb free space.
No this area can't be utilized on any other hard disks - at all.
Mac OS (UNIX) needs it for it's temp files
FinalCut/iMovie/iDVD - the very same - can't be addressed elsewhere.
also
see that You only used A to Z and 0 to 9 in any title or file name !
No °!"#€%&/()=?:; - or alike
Yours Bengt W

Similar Messages

  • Error message when trying to create a unique name

    Why do I keep getting an Error message when trying to create a unique name for a location on your site. I am simply looking to use your free 2GB space to store some pics and vids but keep getting an error message.

    How come Leopard let me use the WGM in standard mode?
    While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
    If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
    If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
    So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
    Yes.

  • Error message when trying to create Recovery Media Creation

    I have a HP Pavilion 15 Notebook PC 15-n235sa and when trying to create my Recovery Media Creation on a 32GB Flash drive it comes up with the error mesage We are experiencing errors in recovering media creation. Please try again.
    This is after.46% of Verify Disk section. So it is almost there.
    I have tried 4 or 5 times with the same result.
    Help!

    Please try another USB Flash Drive or DVDs. USB Flash Drives indicating Windows 8 compatibility may not work for creating the recovery image. If you are still unable to create your HP Recovery Media, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer. When you request this media, indicate that it is free because the HP Recovery Manager failed to work properly.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Error message when trying to create EM Repository

    Hi!
    The following message came when trying to create the EM Repository:
    EXCEPTION_ACCESS_VIOLATION ...
    Java VM: ...
    C [oranl11.dll+0x4a4ba]
    Environment: Windows Server 2003 R2, Oracle 11gR2 (Version 11.2.0.2.0)
    The log file 'emca_repos_create_2011_03_06_11_47_59.log' finished with no errors.
    What could be the problem?
    Edited by: user545194 on 06.03.2011 10:51

    Hi!
    I have installed the newest Java version: Java SE Development Kit 6u24
    on Windows Server 2003 R2, but still have the same problem, when trying to
    create the EM repository.
    I also cannot check Java via command prompt: java -version.
    Maybe this is a security issue on Windows Server 2003?
    Edited by: user545194 on 11.03.2011 00:53

  • Error message when trying to copy a DVD with Roxio Toast v6.1.1

    I'm trying to duplicate a DVD I made via Final Cut Pro and DVD Studio Pro by using Toast Titanium ver. 6.1.1.
    About 3/4 of the way through the record process, I keep getting the following error message:
    "Couldn't complete the last command because there was an I/O error.
    Result code = -36"
    Since I made this DVD myself, I don't believe there is any copy protection or region codes embedded.
    The DVD has 2.72 GB of material on it.
    Please advise, thanks.

    Here are some things to try: Select the DVD in the Toast Copy window and choose Save as Disc Image from the File menu. When that is complete eject the DVD and insert your blank disc, choose the saved disc image with the Image File setting in the Copy window and burn your DVD.
    Alternatively, drag the VIDEO_TS folder from the source DVD to your hard drive. Choose DVD-Rom (UDF) as the format in the Toast Data window. Click New Disc. Add your VIDEO_TS folder. Click New Folder and name it AUDIO_TS. Now burn your DVD.

  • Error message when trying to create realm in OAS

    I have deployed my app to OAS 10.1.3 from JDEV 10.1.3.3. I am trying to create a realm so I can set up roles and users but when I hit apply I get the following error message:
    An error has occurred.
    Error invoking method: addRealm on MBean: oc4j:j2eeType=Security,name=SecurityProvider,J2EEApplication=KATS,J2EEServer=standalone
    Error invoking method: addRealm on MBean: oc4j:j2eeType=Security,name=SecurityProvider,J2EEApplication=KATS,J2EEServer=standalone
    Is there something I should have done when configuring for deployment? Is this a bug with the OAS?
    Thanks for any help.

    Hi,
    this is a JDeveloper forum. There is a separate OracleAs forum that you can post your question to.
    Frank

  • Portal Runtime Error occurred when trying to create iView using template.

    Hi,
    When I tried to create an iView by Content Management through "Existing iView Templates", the Portal runtime error occurred.
    (However, when I tried to create an iView through "Deployed Portal Archive" or "Web Dynpro Java Application", it was successful)
    If you know the same error and the way to solve, please help me.
    Best Regards,
    Daisuke Ikari
    It occurred below system environment.
    Version: NetWeaver 7.0 SPstack18
    OS: Windows 2003 Server SP2
    RDBMS: Oracle 10.2.0.2
    And the error log is below.
    08:29_26/03/09_0002_6759950
    [EXCEPTION]
    java.lang.NoSuchMethodError: com.sapportals.portal.pcd.gl.PcdSearchControls.addExplicitAttributeCheck(Lcom/sapportals/portal/pcd/gl/IPcdAttribute;)V
         at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.getPCDCatalog(TemplatesCacheSrv.java:184)
         at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.refresh(TemplatesCacheSrv.java:589)
         at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.getTemplates(TemplatesCacheSrv.java:646)
         at com.sapportals.admin.templateselection.panes.InitPane.getCatalogList(InitPane.java:206)
         at com.sapportals.admin.templateselection.panes.InitPane.initTemplateList(InitPane.java:122)
         at com.sapportals.admin.templateselection.panes.InitPane.processInput(InitPane.java:59)
         at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:350)
         at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174)
         at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99)
         at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.sapportals.appdesigner.appdesignerfw.TabContentComponent.doOnNodeReady(TabContentComponent.java:110)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
         at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
         at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
         at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Thanks for your help. Here is the xml
    <PAREVAHRS>
    <P_PROJECT_TYPE>Food Equipment</P_PROJECT_TYPE><P_PRJ_CATEGORY>Qualification</P_PRJ_CATEGORY><P_CPM_ID>658</P_CPM_ID><P_FROM_DATE>2007/03/01 00:00:00</P_FROM_DATE><P_TO_DATE>2007/03/31 00:00:00</P_TO_DATE>
    <LIST_G_PROGRAM>
    <G_PROGRAM>
    <PROGRAM_CODE>0180</PROGRAM_CODE>
    <PROGRAM_NAME>Food Equipment</PROGRAM_NAME>
    <LIST_G_MGR>
    <G_MGR>
    <PROJ_MGR>Lamoreaux, Mr. David</PROJ_MGR>
    <LIST_G_PRJ>
    <G_PRJ>
    <PROJECT_NUMBER>249400</PROJECT_NUMBER>
    <LONG_NAME>KM-60, 100 &amp; 150 BAH, ICE MAKE 249400</LONG_NAME>
    <CUSTOMER_NUMBER>22460</CUSTOMER_NUMBER>
    <CUSTOMER_NAME>HOSHIZAKI AMERICA, INC.</CUSTOMER_NAME>
    <LIST_G_TSKEXP>
    <G_TSKEXP>
    <TASK_NUMBER>PO01START</TASK_NUMBER>
    <EXP_TYPE>100 Labor - Chargeable</EXP_TYPE>
    <EXP_DATE/>
    <QTY>9.25</QTY>
    <REV>0</REV>
    </G_TSKEXP>
    </LIST_G_TSKEXP>
    <PRJREV>0</PRJREV>
    <PRJQTY>9.25</PRJQTY>
    </G_PRJ>
    The PRJREV and PRJQTY is at the same level and they are either zero or non null values.
    - Vasu -

  • Error message when trying to create a user account in WGM

    In WGM, everytime I try to create a new account and save, this message appears:
    *Got unexpected error*
    +Error of type eDSAuthNoAuthServerFound (-14102)+
    +on line 2112 of /SourceCache/WorkgroupManager/+
    WorkgroupManager-319.2.2/Plugins/UserAccounts/
    UserAdvancedPluginView.mm
    What is that?
    I tried to create the user accounts in Server Preferences/users but I can not login.
    It seems that I get a lot trouble with leopard server. Should I reinstall it or go back Tiger?
    Thanks

    How come Leopard let me use the WGM in standard mode?
    While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
    If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
    If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
    So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
    Yes.

  • Using 4.0.2, strange error message when trying to created a webi rep

    Hi all
    I'm getting the error message Protocol message end-group tag did not match expected tag. (WIS 00000) while trying to create a webi report using a unx (Designer Information Design tool)
    full error test below
    This unx is using a 7.1 BW cube, and from the unx toll all looks to be ok
    com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: Protocol message end-group tag did not match expected tag.
         at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
         at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:127)
         at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
         at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
         at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:94)
         at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
         at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:419)
         at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:431)
         at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.run(DataProviderServiceImpl.java:192)
         at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.run(WorkspaceServiceImpl.java:346)
         at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:74)
         at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:11)
         at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:113)
         at javax.swing.SwingWorker$1.call(Unknown Source)
         at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
         at java.util.concurrent.FutureTask.run(Unknown Source)
         at javax.swing.SwingWorker.run(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: com.businessobjects.sdk.core.server.ServerException: Protocol message end-group tag did not match expected tag.
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:260)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:238)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:121)
         ... 18 more

    You can still create universe, just not UNX universe.
    If you have upgraded Bi4.0 to Sp01 or SP02 - in IDT it will not let you do that.
    As for docs :
    /people/ingo.hilgefort/blog/2011/03/24/sap-integration-update-9--should-you-start-with-sap-businessobjects-40-or-wait-for-41
    http://smartdirectory.sap.corp:3080/Assets/asset.epx?id=519f2955-0b47-4a0f-81d1-84e8e5303e5e
    http://www.asugnews.com/2011/02/22/sap-businessobjects-bw-integration-to-get-easier-in-bi-4-0/
    https://cw.sdn.sap.com/cw/servlet/JiveServlet/download/139619-38-87308/SDN%20-%20Best%
    /people/ingo.hilgefort/blog/2011/02/10/sap-integration-update-part-5--web-intelligence-40-connecting-to-bex-queries

  • Osstatus error = -120 WHEN trying to create new project

    I have plenty of disk space...just tried to create a new project...starts to look like it is working then generates:
    osstatus error = -120
    What can I do to get Encore to behave correctly?
    thanks, --bill

    dudleythedog
    What computer operating system is your Premiere Elements 9 running on? And, are you running it from the 9.0.1 Update?
    Does the problem exist with and without the antivirus and firewall(s) disabled?
    Then the usual
    1. Running program from an User Account with Administrative Privileges plus Run As Administrator applied to program's desktop icon?
    2. Last version of QuickTime installed on same computer with Premiere Elements?
    3. Video card/graphics card driver version up to date according to web site of manufacturer of the card? According to the Device Manager/Display
    Adapters, how many video cards/graphics cards does your computer use - 1 or 2?
    As a first pass at this, let us delete the Adobe Premiere Elements Prefs file, and, if necessary, the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists.
    Assuming Windows 7, 8, or 8.1 64 bit computer....
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    9.0
    and, in the 9.0 Folder, is the Adobe Premiere Elements Prefs file that you delete. If necessary, delete the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the whole path cited.
    We will be watching for your results and then decide what next.
    Thank you.
    ATR

  • Error Received When Trying To Create DSN From The Command Line

    All,
    Your help is greatly appreciated in advance. I am having trouble packaging Oracle 10G for a batch file deployment. Everything is done except for getting the DSN created which is causing me major problems. We am working with the Oracle 10G R2 10.2.0.1.0 Client on Windows XP Professional SP2. The Oracle database resides on a Windows 2000 Professional Server SP4 running Oracle 9i.
    Our Environment: I am creating two packages of the Oracle 10G client. The first is for a batch file distribution via LANDesk and the other package is for normal batch file install if someone from IT is installing this from a user's desk. Both scripts are really identical the only differences are how they are laid out. I only need help with the DSN creation as everything else is ready to go. I am going to focus on the Non-LANDesk batch file as once I fix this in one script the other one should also be fixed.
    The Problem: The batch script copies the neccesary files to the temporary directory. I then extract the setup files to the temp folder. I run a custom Oracle install using the RSP file from a recorded install. After the install is complete I copy the TNS Names file to the proper location. I then try to call a CMD file with the ODBC command seen below the main script.
    Script (May be easier to read if you download using link below):
    @ECHO ON
    ::This batch files installs Oracle 10G Release 2 Version 10.2.0.1.0 with a Custom Response File
    ::Installation is Interactive
    ::All files are extracted from the ZIP file via the 7-Zip command line tool
    ::The Net Configuration Assistant TNS Names File is copied to its proper location
    ::The CCR ODBC connection is created once the install is complete
    ::All folders used for installation are cleaned up-deleted
    @ECHO Setting Variables
    set NetworkPath=\\dc-landesk\SoftwareForLDAgent\Oracle10G-R2-10.2.0.1.0\Non-LD
    set DefaultPackagePath=C:\Program Files\LANDesk\LDClient\sdmcache\SoftwareForLDAgent\Oracle10G-R2-10.2.0.1.0\Non-LD
    set ExtractionPath=C:\Temp_Oracle10G
    set TempInstallFromPath=C:\Temp_Oracle10G\SetupFiles
    set FileFolderCleanupPath=C:\Program Files\LANDesk\LDClient\sdmcache\SoftwareForLDAgent
    @ECHO Creating Directories
    mkdir "C:\Program Files\LANDesk\LDClient\sdmcache\SoftwareForLDAgent\Oracle10G-R2-10.2.0.1.0\Non-LD"
    @ECHO Copying Files to DefaultPackagePath
    copy /Y "%NetworkPath%\7za.exe" "%DefaultPackagePath%"
    copy /Y "%NetworkPath%\CCR-ODBC.cmd" "%DefaultPackagePath%"
    copy /Y "%NetworkPath%\Oracle10GCustom.rsp" "%DefaultPackagePath%"
    copy /Y "%NetworkPath%\SetupFiles.zip" "%DefaultPackagePath%"
    copy /Y "%NetworkPath%\tnsnames.ora" "%DefaultPackagePath%"
    @ECHO Changing to Extraction Directory
    cd "%DefaultPackagePath%"
    @ECHO Extracting Files to path with no spaces
    "%DefaultPackagePath%\7za.exe" x SetupFiles.zip -o%ExtractionPath% -aoa
    @ECHO Please Open the "Task Manager" manager, Sort by "CPU" Descending
    @ECHO Watch Task Manager For Javaw.exe, press any key when the process Disappears
    @ECHO Install using Custom Response File
    "%TempInstallFromPath%\setup.exe" -responseFile "%DefaultPackagePath%\Oracle10GCustom.rsp" -force -silent -noconsole
    pause
    @ECHO Copying NETCA (Net Configuration Assistant) TNS Names File to proper Location in Oracle Product Directory
    copy /Y "%DefaultPackagePath%\tnsnames.ora" "C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora"
    @ECHO Creating ODBC Connections Using Oracle Driver installed by this Batch File
    call "%DefaultPackagePath%\CCR-ODBC.cmd"
    @ECHO Waiting 20 seconds before proceeding
    ping -n 21 127.0.0.1 >NUL
    @ECHO Remove Temp Files and Folders created during Install
    rmdir /S /Q %ExtractionPath%
    del /Q "%DefaultPackagePath%\*.exe"
    del /Q "%DefaultPackagePath%\*.ora"
    del /Q "%DefaultPackagePath%\*.rsp"
    del /Q "%DefaultPackagePath%\*.reg"
    del /Q "%DefaultPackagePath%\*.zip"
    rmdir /S /Q %FileFolderCleanupPath%
    @ECHO The Oracle 10G installation has been Completed
    pause
    ODBC Script
    odbcconf.exe /a {CONFIGSYSDSN "Oracle in OraClient10g_home1" "DSN=CCR|Description=CCR_data|SERVER=BWB|Database=CCR"}
    As soon as the command is called I see the following error message appear.
    "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259"
    The really strange thing though is that if I let the main part of the script run (Not the ODBC call) and then immediately manually start the ODBC call script it works just fine. So, I don't really understand why the script can't add it itself. Or, I can go the Administrator Tools>Data Sources (ODBC)>and then add it manually which also works. I have tried just pasting the command directly in the main script, therefore, bypassing the call feature but it doesn't make a difference.
    Link (Zip with all scripts mentioned above): http://www.cbridegum.com/Fourms/Oracle/Files.zip
    Has anyone ever seen this kind of issue before? Does anyone have any idea on how to fix this? Any thoughts or suggestions would be great.
    Thanks so much for your help in advance,
    Clif Bridegum

    All,
    I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
    Thanks,
    Clif Bridegum

  • Getting Error Message When Trying To Burn To DVD HELP!!!!!

    This is the error message I am getting as soon as I click on the "burn" button.
    The following warnings and errors were found during the validation of the current project:
    - There seems to be too much motion menu content in your project. Correct this problem before you continue burning this project.
    Any ideas? Please help ASAP, this project is for my grandpa's birthday and I'm trying to finish quickly!
    ~K

    It's a good idea to check the Project Info (under the Project menu in iDVD) before burning a disc. If any of the Duration bars are in the red, then you need to go back and edit your project. Also check the Encoding type with your total Project Duration: if the project total is under 60 minutes choose "Best Performance;" if it is between 60 and 120 minutes you'll need to select "Best Quality."
    Unless you have freed a lot of GB on your hard drive, iDVD will not be able to burn the disc. You'll need at least 15 -25 GB free on your boot drive in order for the app to do all that encoding. It takes a lot of brainwork to turn a 13+ GB movie project into a 4GB DVD file.
    When your project is ready to burn, choose File > Save as Disc Image. This tells iDVD to do all the encoding, and will result in a disc image file that you can mount in your DVD Player app to see that all is well. If so, you can quickly burn the disc image with Disc Utility or an app like Toast. If not, then you haven't burned any coasters. Another advantage is that you will be able to burn duplicates of the disc image very quickly, without going through all that encoding again, should other relatives request a copy.
    Regards.

  • Error 4480 When Trying To Backup To DVD

    When I try to backup my entire iTunes library, 6622 songs, I get an error stating "The attempt to burn a disc failed. An unknown error occurred (4480). This happens when I try to backup anything to DVD.
    Any ideas??? Even though I do have an external hard drive where I backup everything every night, I want to backup my songs to DVD because I have already had one external drive die on me and I lost a TON of songs.
    Thanks!

    I have not received any responses to this issue. I haven't tried using different media, I never thought of that... I will try that tonight and let you know...
    Toshbia Qosmio G20 Laptop   Windows XP Pro  

  • Error message when trying to create DMG with Disk Utility

    Have a highly confidential folder on my drive, so am driving to convert to a DMG file, with password protection. It gets nearly done with the DMG process then generates Error - 49168.
    Anyone know what means?
    1.I choose read-write as my access options
    2.Under encryption I choose the AES setting. It asks me to create a password and I create one (unchecking the "remember password option, of course")
    3. It seems to get through 95% of the process, then produces that error message.
    -- david in KC

    A little Googling suggests that Norton Anti-Virus can cause this problem by trying to scan the image as it's being created. The fix seems to be to turn off NAV while creating the image.
    If that doesn't work, I'd suggest rebooting from the system disk and having Disk Utility repair the disk, to make sure all is in good working order.

  • Error Message When Trying To Burn A DVD

    I just got a new MacBook Pro running 10.6.3 and when i try to burn a DVD using Toast 7. And I get this error message and the disk will not burn. Does anyone else get this message and how can I fix this.... Thanks
    The drive reported an error:
    Sense Key = Medium ERROR
    Sense Code = 0x02
    No SEEK COMPLETE

    I know it sounds crazy on a new machine, but the slightest bit of dust or dirt can cause problems with the DVD - try running a lens cleaner disc through it and see if that helps ...

Maybe you are looking for