Error -36 library transfer issue

Apologies if this isn't the correct forum for this question, although I've been told that this error message is a snow leopard issue. I'm trying to move my iTunes library from one external drive to another, and the transfer keeps failing because I get this message:
The Finder can’t complete the operation because some data in “02 Queen Bee.m4p” can’t be read or written.
(Error code -36)
Every time this error code appears, the transfer aborts, and I end up having to track down the offending file, deleting it and starting the transfer all over again. I have some 17,000 songs in the library, so this may end up taking weeks.
I'm not sure what the code means. These songs are playable, so I don't understand why they aren't transferable. What does this error code mean? Is there some way to fix or delete the offending files without having to go through the transfer scan over and over? DO files need to be repaired or just plain deleted?
Thanks in advance for your help.
Peter

How is the second drive formatted? If not Mac OS you may get this error when transferring large files.

Similar Messages

  • How to fix library transfer issues?

    I recently upgraded computers and in the process changed from Windows XP to Windows 7 64-bit. I've migrated all my files over, including my previous iTunes library with all the music files. Itunes shows all my songs with their play history, etc., but when I try to play music it says the original file could not be found. The problem seems to be that the address iTunes is looking for is wrong. The file location is specified as file://localhost/C:/...etc. I'm assuming the problem is because of that file://localhost part, but I'm not positive of that.
    How can I get iTunes to find all my files without having to manually locate each song on my hard disk?

    What sort of error/information you get about the mds-connection?.. do you see errors when you start the managed server?
    In one of fresh installations of SOA 11.1.1.6, there were some errors regarding MDS schema while starting the managed server.. we logged into the schema and have to re-compile procedure/functions (marked as error/invalid).. then server started fine...

  • Issue with running QuickTime Windows.  Buffer Overrun Error - C++ Library .

    Initial problem was Buffer Overrun Error (C++ Library) when clicking on QuickTime after installation. IE. QT would not even open. http://support.microsoft.com/kb/831875#appliesto
    I took these steps:
    1. Tried to uninstall QuickTime by itself (it failed).
    2.
    3. Manually deleted apple, itunes and quicktime from the entire system (where ever it let me).
    4.
    5. Manually took out from the registration the apple stuff.
    6.
    7. Left the items in the recycle bin (in case there were any real issues and I needed something restored).
    8.
    9. Performed a registration cure (RegCure).
    10.
    11. Took off my entire Anti Virus.
    12.
    13. Dropped down separately the QuickTime and separately the iTunes on desktop.
    14.
    15. Tried to install QuickTime from one of the two saved files on my desktop, but encountered a serious fault
    16.
    17. It needed the QuickTime Installer to remove QuickTime itself, else it crapped out and nothing happened. This complained for a QuickTime.msi file which was a problem.
    18.
    19. Went to the recycle bin and restored only components which were marked QuickTime Installer.
    Removed the QuickTime instead of Repair.
    Went to the website and Installed QuickTime 7 directly.
    It opened on the desktop after installation.
    Installed iTunes separately from the desktop and it opened directly.
    Rebooted my pc.
    Enabled all my Security (McAFee).
    Opened one by one the QuickTime and Then the iTunes.
    Created a computer restore point with a narrative for the future.
    This was a very difficult task and required a lot of steps. I am glad you helped me with the removing part. Its great to have everything working again on my pc.
    I hope this was helpful - it took me ageges to fix.

    I'm experiencing exactly the same bug. Matter of fact, it's the first time in years that I've run across this kind of 'problem' when using non-beta software from a major player. Too bad. This really reflects poorly on Apple's credibility.

  • How do I solve printing issue "Error: /System/Library..."

    I am printing from OS X 10.6.7 to an HP Photosmart C7180 over WiFi.It works just fine from the Admin account.
    However, when I print from another user account, I get the following error:
    /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr failed
    I have checked the HP site and it looks like all the necessary drivers for this series of printers is already included in OS X 10.6
    Does anyone have an idea how I can solve this problem?

    This error is usually caused by an invalid resource name, so if you are using VISA and want to connect to an instrument at address 2 on your first gpib board, use "GPIB0::2::INSTR".
    Also, check that you can communicate with your instrument in Measurement & Automation Explorer (MAX). You might also try the interactive control to make sure that the GPIB communication is working.
    http://www.ni.com/support/gpib/max/ibic.htm
    If this isn't helpful, let us know what development environment you are using and the functions / VIs you are using to try and connect to your instrument.

  • Error while migrating transfer rules

    Hi all,
    When migrating <b>2LIS_02_SCL</b> transfer rules to transforamtions I got a shotdump "ASSERTION_FAILED  in 'CL_RSTRAN_TEMPLATE->CREATE_ROUTINE" for this I have implemented Snote : 986199  after this when I am migrating transforamtions are getting created but showing syntax errors (for this transfer rules there are standard routines ) .Can anyone help me to sort out this issue.
    Regards
      KK

    Hello,
    unfortunately not all transfer rules can be migrated automatically.The migration of the business content transformation is done on customer project base. This means some of the adjustments needs to be done manually.
    Please adjust the rules to the ABAP OO compliance.
    This how to paper should help:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
    and
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab
    I hope this helps.
    Michael

  • Error while activating Transfer Structure

    Hi Expert,
    we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
    Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
    Message no. EA201
    Diagnosis
    An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
    System Response
    The operation was canceled.
    Procedure
    Please check whether the relevant entry already exists
    I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
    I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
    Regards,

    Hi Dubey,
    I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix  this.
    Thanks,
    Renu

  • Error - iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3 ???

    In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3.
    I've tried changing permissions and sharing - nothing seems to work. mat be a Windows 8 issue???

    You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter.  That's also done in Get Info for the file or folder concerned.
    Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

  • Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

    Dear SAP Expert:
    I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
    I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
    Please suggest me how to fix that kind of issue.
    "com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
    at SAPAdapter.execute(Unknown Source)
    at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
    at JavaAgent.NotesMain(Unknown Source)
    at lotus.domino.AgentBase.runNotes(Unknown Source)
    at lotus.domino.NotesThread.run(NotesThread.java:249)
    Thanks in advance! Your help would be highly appreciated! Thanks again!

    error is clear, check your abap code.

  • Error -1073807253 occurred at VISA Read in transient SR830.vi VISA: (Hex 0xBFFF006B) A framing error occurred during transfer.

    Hi,
    I am have written a program with labview to make transient c-v measurement using a stanford research SR830 lockin amplifier. The program seems to be runing fine, but sometimes it is givvibg an error:
    Error -1073807253 occurred at VISA Read in transient SR830.vi
    Possible reason(s):
    VISA:  (Hex 0xBFFF006B) A framing error occurred during transfer.
    Error -1073807253 occurred at VISA Read in transient SR830.vi
    Possible reason(s):
    VISA:  (Hex 0xBFFF006B) A framing error occurred during transfer.
    but if I press ok, the program again starts running. What might be the poblem? BTW I googled a bit and I see that in the labview topic "RS-232 Framing Error with HP 34401A Mulitmeter" by pkennedy32 this is what is said about framing error:
    ""Framing Error" in an RS-232 context means a very specific thing - when the receiver was expecting a stop bit, the line was not in SPACE condition. This can be the result of:
    1... Baud rate mismatch (although other problems would likely crop up first).
    2... Data Length problem, If I send 8 data bits and you expect 7, the stop bit is in the wrong place.
    3... Parity setting mismatch - If I send 7 data bits + parity and you expect 7 data bits and no parity, the stop bit is in the wrong place.
    4... Mismatch in # Stop bits - If I send you 7 Data bits + parity + one stop bit, and you expect 7 data bits + parity + TWO stop bits, the second one might not be correct, although most devices do not complain about this.
    But, I must say that this is the same com port setting that I use to measure c-v hysterysis, but I never gt this error there.
    I attach the program herewith for your kind perusal. Please help me resolve this issue.
    Thanks in advance.
    Solved!
    Go to Solution.
    Attachments:
    transient SR830.vi ‏94 KB
    csac.vi ‏8 KB
    sr830 initialize1.vi ‏15 KB

    @Dennis Knutson  you are right I checked the read indicator in backslash mode, and instead of a \n it is sending \r. So I changed the \n in my write strings to \r. But, if I keep the CLOSE VISA outside my loop instead of inside as you suggested, the termination character appears to come in the middle of the read string instead at the end. And since the read terminates at the \r so it is displaying some junk value before the \r, but if I put the CLOSE VISA outside the loop and play along with the bytes at the read buffer, I see the whole read string with the \r  at the end of the string. But, whenever the values are in exponential form (when close to zero) like 6.938839 e-5, I always get a time out error whatever be the timeout that I put at the VISA initialize. And subsequently, if I stop the program and run it again the machine program hangs and I donot get any reading. Then after I close it again and start, sometimes it hangs for some more or starts working. If I put an arbitrarily large byte count at the READ VISA, then I always get the time out before the operation completed error.
    @ Ravens Fan I have removed the CSAC VI altogether and taking the CH! And CH” reading separately, instead as one string. So, no more issues with that.
    I use the control at the delay so that I can choose how much delay I want to set, and I use the math operation because I am using adding up the delay time to keep track of the time elapsed. Because in the end I have t plot a time vs. CH! And CH” readings.
    I am not sure but probably I am making some silly errors. Please help me out. 
    Attachments:
    transient SR830-2.vi ‏103 KB
    sr830 initialize1.vi ‏15 KB

  • TFTP 'configuration update' from 5508 WLC fails stating reason as '%Error: Config file transfer failed – Unknown error –refer to log'

    Dear Experts,
    I have two WLCs and other management devices as part of same subnet. I am able to upload ‘configs’ from all the devices on to my TFTP server. However when I am attempting to do the same from one of my WLC, it is failing consistently stating error message as:
    ‘%Error: Config file transfer failed – Unknown error –refer to log
    Has anyone else too faced the same issue and how would we overcome this? Any specific debug that could help get more details on it?
    Though the error message says, refer to log but still I don’t see anything that gets reflected in ‘Monitor logs’ which is related to ‘configuration file’ upload failure.
    WLC code: 7.4.100.0
    PFA as the error snippet.
    Thanks and Regards,
    Adnan

    Hi Kaneswaran,
    Just a soft reboot helped me solved the problem :). Still I am on 7.4 and facing no issues after this. 
    Apologies for coming too late to respond. Getting a down time window was not that easy and so was much delayed to try soft reload. I am still on 7.4 and facing no issue. 
    Glad that in your case it starting working all of a sudden. Could you please verify from 'show tech-support' to confirm if by chance your WLC had undergone any crash that could have caused the WLC to reload and thus accidently fixing the issue :)
    Best Regards,
    Muhammed Adnan 

  • Compile error: Object library invalid or contains references to object definitions that could not be found

    Office Online 365 installed today January 20 on brand new HP Envy. Get the above message when loading Excel applications with code and when running code. Will greatly appreciate help. Applications run well on other computers.

    Hi Jaime,
    >> Get the above message when loading Excel applications with code and when running code. Will greatly appreciate help. Applications run well on other computers.
    >> Compile error: Object library invalid or contains references to object definitions that could not be found
    According to the error message, it seems some ActiveX control is not registered successfully on the new machine.
    Would you mind telling us which ActiveX controls you used in the workbook?
    >> For my applications Excel from Office 365 is now useless. Should I just let my subscription run out and purchase another version?
    According to my experience, this issue is not related to the subscription.
    Regards,
    Jeffrey
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Thousands of "... CFLog (21): Error loading /Library/..." errors

    Recently, I've been getting litterally thousands of occurances of the same error message in my Console log (/Library/Logs/Console/username/console.log), as well as hundreds of the same error message in my Terminal window when running certain normal commands such as osascript. They are all of the form:
    YYYY-MM-DD hh:mm:ss.ddd procname[pid] CFLog (21): Error loading /Library/Application Support/DivXNetworks/liblame3.92.dylib: error code 0, error number 2 (dyld: osascript can't open library: /Library/Application Support/DivXNetworks/liblame3.92.dylib (No such file or directory, errno = 2)
    Processes reporting this error include SystemUIServer, System Preferences, Dock, iTunes, Terminal, loginwindow, osascript, Calculator, and many others. In fact, it appears that this messsage occurs for every Cocoa application.
    As far as I know, none of the processes reporting this error have any use of any DivX libraries. And, to my knowledge, nothing was ever installed in the location the error mentions.
    (How) does this make any sense, and how can I fix it?

    There are a few problems with your suggestion of just ignoring the problem:
    * It's not supposed to happen.
    * I didn't use to get these errors.
    * I don't get them on the other computer.
    * It slows things down significantly; specifically: it takes longer to startup (because of loginwindow) and login (loginwindow and Dock), applications take longer to start (all of them), AppleScripts run slower, and so does QuickTime.
    * It wastes hard drive space, of which I only have 6GB on on iMac and 8 on the other, by exploding console.log (which, due to this issue, can grow to several MB in a day)
    * It interferes with several shell commands (my Terminal window gets flooded with hundreds of them, and nothing starts happening until all of them get displayed), especially osascript (the command-line tool for AppleScript), which I use routinely via several tools I've written which call it
    * It is an error, which by defenition should be corrected, not ignored.
    Does someone know what is causing this, and how to correct it, please?
    One minor edit to original post; it should read (changed part bold):
    YYYY-MM-DD hh:mm:ss.ddd procname[pid] CFLog (21): Error loading /Library/Application Support/DivXNetworks/liblame3.92.dylib: error code 0, error number 2 (dyld: procname can't open library: /Library/Application Support/DivXNetworks/liblame3.92.dylib (No such file or directory, errno = 2)
    )

  • VB ERROR - object library invalid or contains references to object definiti

    My system crash and i had to reinstall office 2007 and bpc. now I get the follwoing error.
    VB ERROR - object library invalid or contains references to object definitions that could not be found.
    i have checked ma macro settings and they are low. anyone see this before?

    Hi ,
    we upgarded excel 2003 to 2007 .
    Now i am facing same issue . I deletd the .EXD files .Stull i am getting the same issue .
    Pls let me know solution for this .
    Regards,
    PSr

  • I get the error "itunes library file cannot be saved. An unknown error occurred (-50)."

    I recently installed iTunes on a new laptop with Windows 7.  Why do I get the error "iTunes library file cannot be saved. An unknown error occurred (-50)?"

    Have been able to resolve this issue?... I have just exeperienced it and not happy that I can't resolve it.

  • GarageBand error after data transfer that states "This song requires a newer version of GarageBand. Please update to the latest version of GarageBand before opening this song". Please Help!

    I recently had a data transfer from my older mac to my newer one. After the transfer I logged into my new account and opened up my GarageBand. It worked perfectly fine, however when I logged into my old account with all my older data that I just transferred over, I could not open my GarageBand files and there is an error that states "GarageBand error after data transfer that states "This song requires a newer version of GarageBand. Please update to the latest version of GarageBand before opening this song".If anyone could please help me with this issue, I'd greatly appreciate it. Thank You!

    When you transferred your data from your old mac, you may have accidentally transferred an older GarageBand version and either overwritten your newer version, or your old account still has the old GarageBand icon in the Dock.
    Search with SpotLight, if you have more than one Garageband version on your new Mac (type "GarageBand" into the SpotLight search field). Does it list more than one GarageBand version? Then delete the older GarageBand.app.
    What GarageBand version have you been using at your old mac, and what is the version on your new mac? If it has been bought recently, it should have come with GarageBand '11.
    Regards
    Léonie

Maybe you are looking for