Error 36 when connecting to wired ethernet network

I'm trying to connect my new iMac to my existing wired ethernet network. The network has been functioning for some time with 2 PCs connected to a router which is connected to a cable modem.
I have added the iMac by connecting it to the router. I am able to get the iMac connected to the internet via this setup. The problem is when I try to connect to one of the PCs from the iMac I get error 36. I have tried all the server addreses I can think of. (smb://ip address of the PC/shared drive letter; smb://computer name/share drive letter). It works on it for a while then kicks out the error message. I have "pinged" the PC and it is connected. File sharing is enabled both on th iMac and the PC.
Apple support says this is a Windows problem and has left me high and dry even though this is supposed to be seamless.
Please help.

While waiting to be connected to a "product specialist" on Apple Tech Support I figured this out. First get the ip address for the PC you want to connect to by going to Start> Run>type cmd <enter>. Then type ipconfig <enter>. note "ip address". On the Mac Go>connect type smb://ip address for the PC click continue and you will get the sign on dialogue for the PC.
I am now happily copying my 4000 music files.

Similar Messages

HP Officejet Pro 8600 Plus (UK purchase) will not connect to wired ethernet network

Hi
We have an HP Officejet Pro 8600 Plus (purchase here in UK approx 9-12 months ago) which has sort of worked OK wirelessly but finance industry compliance requirements now require me to connect to it by normal ethernet cable.
When I disable wireless and plug in a (tested and working) ethernet cable it does nothing. I have done a factory reset (via the screen menu) to remove any previous settings. Turned off, turned on, still nothing.
I have restored Network defaults also using the menu command within settings - network; no difference.
In Network - wired summary the screen says:
IP: Not applicable
MAC: xxxxxxxxxxx (not for sharing here)
Hostname: xxxxxxxxx (not for sharing here)
Wireless Direct: Off
I have tried it with IP settings turned to Automatic (DHCP) - no joy.
I have tried it with IP settings turned to Manual(Static) - when i then type in the static IP address that is within the router range (but outside the DHCP reserved range) as soon as I press Done, the settings are lost i.e. 192.168.0.102 - push 'Done' and the IP goes back to 000.000.000.000
The same when entering the default gateway and subnet masks.
I have restored to defaults several times, tried manual and DHCP several times, no joy.
Please let me have some serious suggestions at the earliest opportunity. Just to reiterate I have tested the network connection and cables with other ethernet equipment and they are working. My questions include:
1. Anyone know how to make this printer actually store the manually entered IP addresses etc?
2. What am I missing about the wired setup?
3. Is this a known issue? Is it an issue with the hardware ethernet socket or something?
4. Also in this forum there are references to a Hard Factory reset that is apparently different to the menu 'Reset to Factory Defaults' but links to an article about it just give a 404 error, not found. [Does HP actually have two different levels of Factory Default and if so, God knows why! Does anyone know a working link to this information please?

Hello Qw8, welcome to the forums!
I read your post about not being able to successfully install your Officejet 8600 Plus to your wired network. I will do my best to find suggestions for you to try. I would first like to know which Operating System you are installing the printer on to help me with my research.
If you haven't already, run the installation (HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g Drivers) with your security and firewalls disabled to see if the proper connection can be made.
I do see you ask about other resets and there are others however, at this stage they may not be needed. If they are, I can send you a private message at that time with that information.
Please let me know your OS and we will go from there!
Have a wonderful weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Error when connecting to store- says network connection timed out

whenever i try to connect to the music store it says that i can't connect because it timed out. it was working fine at first. i took down my fire wall (windows xp) and i downloaded the newest version of i-tunes. my biggest problem is that whenever i want to import one of my cds, the info for the cd doesn't come up (artists, song name, album, genre). they are not burned cds and before when i was on a different interent server it worked just fine.
i tried going into the windows/system32/drivers/etc host thing and putting the number sign in front of the number but it was already there (i read about this on another post)
i have norton but i had norton before when the music store was working and i haven't updated it. the only thing that has changed is my internet server. it's a different company and different modem and all. but like i said, i disabled that firewall in my network connections.
please help.
Compaq Windows XP Old

whitsacoolcat,
Since you are not able to get to to iTunes store or the gracenote database (where the CD track info is located), you should contact your internet service provider for help since that and their modem are the only things that have changed between the time these worked for you, and when they stopped working.
G

Will my Mac automatically stop using wifi when connected to an Ethernet enabled thunderbolt display?

Will my 2012 Macbook pro retina automatically stop using wifi when connected to an Ethernet enabled thunderbolt display?

Depends.
If you go in System Preferences / Network, you will see a list of all the network interfaces your current configuration has. If you click on the gear icon next to the minus sign, the drop menu will offer "Set Service Order...". There you can prioritize the order of use: Ethernet above Wi-Fi and wireless will be ignored if Ethernet is available.
Note that the Wi-Fi card will remain active and associated with an access point nonetheless. It just won't be used for communications by the OS and apps.

Error when connecting to terminal

Hello,
I have a BB 8100, Desktop manager 4.6.
Synchronization was working correctly 3-4 weeks ago.
Today, when I tried to synchronize, I had this error message:
0 x 80040fb3
I tried to debug this with the procedure of modifying Last name, first name, etc.... with no success
I tried several time to synchronize again but without success.
Now, the situation is even worse!
New message when I connect my BB to my computer. When I launch Desktop manager, I have the following error:
"Error when connecting to terminal. Make sure that your terminal is correctly connected, then try again"
I can not anymore try to synchronize!
This is very strange, it never happened before.
Nevertheless, Desktop Manager recognize my BB, as I can read on the buttom left part of the screen: Terminal connected (code Pin) recognized xxxxxx.
HELLLLP!
Thanks
Solved!
Go to Solution.

Hello RianaZaire,
Unfortunately, I still have the same error Message.
I have not been able to solve the situation.
I reinstall twice the software.
I tried to connect my Blackberry to my computer with a new cable.
I still have the same error message.
I don't know what to do.
Maybe somebody will read our messages, and help us!
Maybe this information has a link with my blackberry problem:
I also have a problem with an another device. (a TOMTOM GPS system), which happened almost at the same time.
Usually, when I connect this device, it will directly open the GPS sofware ( where I can download the new updating stuff). But since this Blackberry problem, I can not do it anymore. Impossible to connect the TOMTOM onto it. It is not recognize onto my computer.
For information, I also do synchronization of my adress book between my phone and TOMTOM.
HELP HELP

Error when connecting to portal from some machines

Hi all,
Can anyone help me with this.
I get this jserver error when connecting to portal from some
client machines.
I works fine from the others. Any ideas?
This is the error I get:
[08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
label=73 url=http://odeceixe:81/pls/portal30/!
PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
[08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
Unexpected Exception, name=content-fetcher5
java.io.EOFException: Premature EOF encountered
     at HTTPClient.StreamDemultiplexor.read
(StreamDemultiplexor.java, Compiled Code)
     at HTTPClient.RespInputStream.read(RespInputStream.java,
Compiled Code)
     at java.io.InputStream.read(InputStream.java:95)
     at java.io.InputStreamReader.fill
(InputStreamReader.java:163)
     at java.io.InputStreamReader.read
(InputStreamReader.java:239)
     at oracle.webdb.page.ContentFetcher.run
(ContentFetcher.java, Compiled Code)

Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Error when connecting to MDM from different lan

Hi,
I got "Image Server Login Error" when connecting with client to server from different LAN, server is up, and i can connect to it when i in the same LAN. Ports 20003, 20004, 20005 for MDM server discovering and repository port 2345 is accessible through router. Running SP2 5.5.24.06.
Rem: it's not a port problem, when port 2345 is closed i got "WinSock error on connect"
PS: When I used MDM SP1 i connected to him properly in the same case.

Hi Dmitry,
If your repository is set to port 2345, then 4 subsequent ports should be openned also, i.e. 2346-2349.
Regards, Lev

Error When connecting proxy

Hi,
When I try to connect proxy in application, it is not connecting instead when I check whether it is going through proxy or not it is telling that it is establishing direct connection only. Here I have posted part of the coding. Please If any error give me a hint.
            System.setProperty("ProxySet", "true");
            SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
            proxy=new Proxy(Proxy.Type.HTTP,addr);here in this code part I am checking whether is connecting with proxy or not.
URL u = new URL(url);
URLConnection uu=u.openConnection(ScrapperInterface.proxy);
try
                URI uuu = uu.getURL().toURI();
                List l=ProxySelector.getDefault().select(uuu);
                for (Iterator iter = l.iterator(); iter.hasNext(); )
                     Proxy proxy = (Proxy) iter.next();
                     System.out.println("proxy hostname : " +proxy.type());
                     InetSocketAddress add = (InetSocketAddress)proxy.address();
                     if(add == null)
                         System.out.println("No Proxy");
                     else
                         System.out.println("proxy hostname : " +add.getHostName());
                         System.out.println("proxy port : " +add.getPort());
catch (URISyntaxException ex)
                Logger.getLogger(StartThread.class.getName()).log(Level.SEVERE, null, ex);
}Output is:
proxy hostname : DIRECT
No Proxy

Re: Error When connecting proxy You didn't get any error when you created the connection. Your title is misleading. Probably you are misleading yourself - see below.
System.setProperty("ProxySet", "true");That does nothing. There is no such property, contrary to widespread belief.
SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
proxy=new Proxy(Proxy.Type.HTTP,addr);... and using java.net.Proxy has nothing to do with system properties in any case.
URLConnection uu=u.openConnection(ScrapperInterface.proxy);Here you are opening a URLConnection via the proxy. As you got output from the code further down it is clear that this step must have succeeded. So all the code below is pointless.
URI uuu = uu.getURL().toURI();Here you are getting the URI you created the connection for.
List l=ProxySelector.getDefault().select(uuu);Here you are getting the Proxies the default ProxySelector would have given you for that URI. Nothing to do with the URLConnection you created, and nothing to do with the Proxy you created either.
InetSocketAddress add = (InetSocketAddress)proxy.address();So here you are testing the proxy address for the system's default proxy for that URI. Again, nothing to do with what you did above.
What you should be doing here is using the URLConnection you have already created. Not testing an address.

At home I have wi fi and want to set up an air traveller express so it works with my Ipad ina a hotel room when connected to an ethernet cabel. The instructions are not good any ideas?

I have just bought an air traveller express and need to set up to work with my Ipad2 when connected to an ethernet cable ina hotel,
At home I have wi fi and a cabled PC. The express instructions are'nt helping me to know how to set it up. Any ideas please?

Nigel123 wrote:
I have just bought an air traveller express
Do you mean an Apple AirPort Express?

Error when connecting to system

Hi,
I have been off topic for quite a while and when I wanted to pick up today, I couldn't connect to the HANA server anymore. I haven't changed any settings since last setup, all I get is the "Error when connecting to system" in the Quick Lauch of the infornation modeler.
Any suggestions?
THX
Markus

Hello,
did you connect since upgrade to SP03?
You might be looking for this thread.
SAP In-Memory Developer Center - planned downtime 2011-11-15, 10-11am PST
Tomas

"no ocijdbc11 in java.library.path" error when connecting a TNS database co

Hi
"no ocijdbc11 in java.library.path" error when connecting a TNS database connection
I have the same problem 'error code' when testing the connection to a database although I have an APEX db that connects without a problem.
I have re downloaded jre & SQL Developer just to ensure all files are where they should be with no luck.
I've also tried most of the suggestions in various threads.
Does anyone know what exactly causes this error?
eg; should I be looking for a file called 'ocijdbc11' & put it into the 'java.library.path' path?
Can anyone explain to a newbie at db connections what I should do?
I'm using the 'thin' client as the checkbox is clear & I don't know what path to enter into the correct file to make this work??
This is & needs to connect as a TNS connection & was working fine until recently, the only change I can think of is a move of files from the 'C' drive but I thought redownloading SQL Developer would slove this.
Thanks

When you reinstalled SQL Developer, did you install into a new directory (ie rename or delete the old directory first)?
I don't know if system setup contains directory references (which might be invalid after moving the location of SQL Developer). Does renaming your system2.1.1.64.45 directory (in C:\Documents and Settings\username\Application Data\SQL Developer) help? Note that your connections are in the connections.xml file in the o.jdeveloper.db.connection.11.1.1.2.36.55.30 subdirectory of system2.1.1.64.45 - you will either need to export connections before renaming and then import again after or copy this file to test if you can connect.
Finally, the TNS Names directory preference is just a way of telling SQL Developer where to look for the tnsnames.ora file, rather than just assuming it will pick the right one. If you go to create a new connection, do you get the right list of TNS aliases? If not, then set this preference to the directory where the right tnsnames.ora file lives.
theFurryOne

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

URGENT - INTERNAL SERVER ERROR when connecting to site

i'm getting INTERNAL SERVER ERROR when connecting to site. everything was ok till yesterday night but since today morning, nobody has been able to log in the site.
i looked at the Apache Listener log files in IAS_HOME/Apache/Apache/logs
the error_log file contained the following :-
[Fri Jan 26 08:32:04 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:32:05 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/p
age
[Fri Jan 26 08:32:58 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:32:58 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/I
sItWorking
[Fri Jan 26 08:33:13 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:33:13 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/page
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
then i tried to kill all the httpd processes and restart the apache and the error log was populated with the following :-
[Fri Jan 26 09:35:48 2001] [warn] child process 16269 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16270 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16271 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16272 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16273 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16274 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16275 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16276 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16277 still did not exit, sending a SIGTERM
,same messages continue for different
,process ids followed by
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Attempt to free unreferenced scalar.
Attempt to free unreferenced scalar.
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:35:53 2001] [error] child process 16269 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16270 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16271 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16272 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16269 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16270 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16271 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16272 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16273 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16274 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [notice] caught SIGTERM, shutting down
[Fri Jan 26 09:38:10 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:38:44 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 09:38:44 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
e
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:39:06 2001] [notice] caught SIGTERM, shutting down
[Fri Jan 26 09:39:30 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:42:17 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 09:42:17 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
e
Any ideas or suggestions anyone ....??
what could have possibly changed since yesterday to effect the site ??
any help would be greatly appreciated ...
null

A couple of questions:
1) Did you try shutting down apache with the sript?
2) When killing the httpd processes did you also kill the associated java processes?
null

SSL error when connecting in SAP HANA Cloud Portal tutorial

Hi,
I'm going through the tutorial for SAP HANA Cloud Portal - SAP HANA Cloud Portal Developers Tutorial
Unfortuanatelly I have problems with deploying public destinations (page 9).
When I try to deploy the destination for the CRM back from the command console using neo command with relevant parameters and entering my password I get the following error:
ERROR; SSL error when connecting to https://configapi.hanatrial.onedemand.com/configuraiton/api/rest; server certificate might be invalid or untrusted.
Logfiles.
Session log
2014-08-18 15:53:59,579 DEBUG [main] org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager$1: Get connection: HttpRoute[{s}->https://configapi.hanatrial.onedemand.com], timeout = 0 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]] total kept alive: 0, total issued: 0, total allocated: 0 out of 20 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: No free connections [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Available capacity: 2 out of 2 [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:53:59,582 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Creating new connection [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]] 2014-08-18 15:53:59,729 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnectionOperator: Connecting to configapi.hanatrial.onedemand.com/216.128.6.149:443 2014-08-18 15:54:00,035 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnection: Connection closed 2014-08-18 15:54:00,035 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnection: Connection shut down 2014-08-18 15:54:00,036 DEBUG [main] org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager: Released connection is not reusable. 2014-08-18 15:54:00,036 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Releasing connection [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:54:00,037 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Notifying no-one, there are no waiting threads
Console log
2014-08-18 15:53:56,080 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Starting execution of command [get-destination] 2014-08-18 15:53:56,086 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Command [get-destination] init() finished for [1] ms 2014-08-18 15:54:00,038 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Command [get-destination] cleanup() finished for [0] ms 2014-08-18 15:54:00,046 FATAL [main] com.sap.jpaas.infrastructure.console.ConsoleClient: (!) ERROR; SSL error when connecting to https://configapi.hanatrial.onedemand.com/configuration/api/rest; server certificate might be invalid or untrusted com.sap.jpaas.infrastructure.console.exception.ValidationException at com.sap.jpaas.infrastructure.console.command.RemoteCommand.getHttpClient(RemoteCommand.java:97) at com.sap.jpaas.infrastructure.console.command.UnsecuredRemoteCommand.getHttpClient(UnsecuredRemoteCommand.java:57) at com.sap.core.connectivity.config.cmd.ConfigurationConsoleCommand.createHttpClient(ConfigurationConsoleCommand.java:254) at com.sap.core.connectivity.config.cmd.GetAction.download(GetAction.java:79) at com.sap.core.connectivity.config.cmd.GetAction.run(GetAction.java:52) at com.sap.jpaas.infrastructure.console.CommandManager.run(CommandManager.java:295) at com.sap.jpaas.infrastructure.console.CommandManager.run(CommandManager.java:260) at com.sap.jpaas.infrastructure.console.ConsoleClient.run(ConsoleClient.java:235) at com.sap.jpaas.infrastructure.console.ConsoleClient.main(ConsoleClient.java:85) Caused by: com.sap.core.utils.infrastructure.validation.HostValidationException: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated at com.sap.core.utils.infrastructure.validation.LandscapeHostValidator.getHttpClient(LandscapeHostValidator.java:304) at com.sap.jpaas.infrastructure.console.command.RemoteCommand.getHttpClient(RemoteCommand.java:95) ... 8 more Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397) at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128) at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:390) at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:148) at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:149) at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:121) at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:561) at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:415) at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:820) at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:776) at com.sap.core.utils.infrastructure.validation.LandscapeHostValidator.getHttpClient(LandscapeHostValidator.java:284) ... 9 more
BR
Beata

Hi Beata,
The CRM scenario is working again. We had to re install the Connector and deploy a new proxy app.
Therefore you would need to download the code from the GitHub repository again. The changes you need to do on your side:
1. Redeploy the new crm__public destination file - the updated destination now points to the new location of the proxy application
2. Update the code of the registration form scripts (form.js and form.spec.xml).
Regards,
Ido

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

Not all car systems are compatible with the iPod touch. Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

Error 36 when connecting to wired ethernet network

Similar Messages

Maybe you are looking for