Error -36 when trying to copy AVI files from External Drive to Mac

Hi
Hoping for some help with a problem I appreciate others have faced.
I bought a new video camera recently and have just tried to copy the AVI files from the first few videos to my mac but am getting the error code 36 that states the files cannot be read or written.
The format of the camera is MS-DOS (FAT 32) but when I tried changing it to MAC OS Extended it did something to the camera so the mac could then not recognise it when I tried to re-connect it via the USB port.
I've been able to copy the files onto my friends Windows laptop no problem so don't believe them to be corrupt.
Have also tried the dot_clean fix but this didn't work.
Could there be another reason for the error? Any help or advice would be much appreciated.
Thanks

BDAqua wrote:
I hear 3rd Party, or HW Raid 0/1/5/10 are OK, but 6 months is the absolute most I got out of my many screaming RAID setups before they completely lost it!
Bummer. I'm not really doing this for speed though, just for total storage volume and constant, worry-free, no-brainer back-up. I guess RIAD in general is something I need to study up on. Would a simple mirror of one 500GB drive to another (back-up) - and do that twice - be a better, more reliable way to go?
I've used Tri-Backup3/4 for years for Backups, it's fast, automatic, reliable, works in the background if you wish...
Back-up software always seemed to have some kind of a hiccup to it, but I'll certainly look into Tri-Backup3/4. I used to Retrospect years ago, a rather fussy thing if I recall.
Now, on the Safe Mode boot - not a success BUT a different result!
I got the -36 again, but this time it was the external drive FILE that errored, not the OS-resident drive.
In other words, pre-Safe Mode the error said "...because some data in "ZillaHAL" could not be read or written." (ZillaHAL is my OS-X drive).
In Safe, it read, "...because some data in "WinXP Pro.vmem" could not be read or written."
"WinXP Pro.vmem" is the virtual machine file - which basically is a simple Mac volume (folder) containing all of the files to run my XP virtual machine.
Also, this time, a file* did manage to remain on the external drive whereas before, after the error, no file at all remained.
* a generic icon appears, but it shows a size of 16+GBs. The actual file is 18.13GB - I did manage to shrink it down the other day (from it's previous 25GB).
Well, that's it for now. I'll be away for three days, so don't mind me if I cannot reply back for a spell.
Thanks BD,
mp

Similar Messages

When trying to transfer a folder from external drive to "users" folder, it says it cannot be modified because it is required by OS X. What does this mean?

When trying to transfer a folder from external drive to "users" folder, it says it cannot be modified because it is required by OS X. What does this mean? How can I transfer the folder?

It sounds like you're trying to replace a home folder. Replace the contents of the folder instead, or use Migration Assistant.
OS X: How to migrate data from another Mac using Mavericks

"Entitlements are not valid" error message when trying to sync ipa file from iTunes to iPad

Is anyone else getting this error message, "Entitlements are not valid", when trying to sync .ipa file from iTunes to iPad?
The issue I'm having is getting the ipa file that was built by the 'Adobe Flash Packager for Iphone' installed into my iPad.
So, I have a swf file that works and was able to publish it into the Android Market. I then compiled and build the same flash project with the Packager for Iphone into an .ipa file. But when I try and install this .ipa file into my iPad to do my testings, i'm getting the error message.
I would like to test my ipa file in my iPad device before submitting it to the Apple Store.
Any help would be appreciated. thank you.

Developing for iphone can be amazingly complicated and frustrating. (even before you start coding). The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious.
I solved the problem of the "Entitlements are not valid". The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings. (ie. com.yourdomainname.yourappname). After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad.
I wish the error message had been a little more descriptive. Could have saved me a whole day.
I hope this helps others. But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

Receiving ERROR meassage when trying to copy..file name too long.

Hello.
There is an error code number, but didn't write it down...will do so, if no-one can answer this question at the minute. I am not at the Mac at the moment, so this post is pre-emptive.
Problem:
If I try to copy over a folder with photoshop images onto another drive, the copy is incomplete due to the name/s of the files being too long, apparently.
The error message says something to the effect: 'the names are too long can't complete copy'.
The file names are about 10-12 [at most]characters in length.
Please advise
Chris

If the drive is formatted HFS then you are limited to 32 characters on a file name. If it is formatted HFS + then you can have file names as long as 255 characters. I am not familiar withi the format you say the drive is formatted in so I can't speak to it.
If you are receiving -50 errors that can indicate a file name that is too long OR an illegal character in the filename regardless of its length.
If you are actually using 10.3.8 as your profile states then that may be part of the problem. Many of these problems existed in 10.3.X but were fixed in 10.4
I remember that 10.3.8 had issues copying to external drives when there were more than a certain number of characters in a filename. I don't remember the number but for some reason 10 or 12 is what comes to mind. It caused me many problems when I would try and copy files to a Zip disk that I used to have. Since I updated to 10.4 those issues have never occured again.
Since you know what folder the problematic files are in why not just open the folder and try to copy files one at a time. When you get to the one(s) that is a problem, change the file name to something shorter.
A better solution would be to update to 10.4 but with 10.5 coming out sometime in the Spring of 2007 this may not be the time.

Error 500 when trying to upload PAR file from NWDS

Since few weeks now, I'm not able to directly upload a par file from NWDS. I'm always getting a operation failed error. In the sap-plugin.log file I've found the following trace:
[21.04.09 / 17:51] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > No Information
java.io.IOException: Server returned HTTP response code: 500 for URL: http://myserver.com:50500/irj/servlet/prt/portal/prteventname/upload/prtroot/com.sap.portal.runtime.system.console.archiveuploader?login_submit=on&j_user=mylogin&j_password=mypwd&j_authscheme=default&uidpasswordlogon=log%20on
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1170)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.readResponse(DeployEngine.java:363)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.uploadPar(DeployEngine.java:435)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.deploy(DeployEngine.java:221)
     at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.processUpload(SAPMPWizard.java:416)
     at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.run(SAPMPWizard.java:350)
     at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
     at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
     at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:758)
     at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard.performFinish(SAPMPWizard.java:531)
     at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
     at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
     at org.eclipse.jface.window.Window.open(Window.java:563)
     at com.sap.portal.developmentTools.general.uploader.QuickPARUploader.run(QuickPARUploader.java:146)
     at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
     at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
     at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)

Developing for iphone can be amazingly complicated and frustrating. (even before you start coding). The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious.
I solved the problem of the "Entitlements are not valid".   The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings. (ie. com.yourdomainname.yourappname). After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad.
I wish the error message had been a little more descriptive. Could have saved me a whole day.
I hope this helps others. But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

Error message when trying to send .dng file from Lr to Ps

If I am working in Lr (5.4) and try to send a .dng file from Lr to Photoshop CC (reinstalled latest version from Adobe.com today, 4/13/2014), I get this message: "
Adobe Photoshop CC cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop CC works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X."
I uninstalled and reinstalled Photoshop CC today and that did not fix the problem. I am in OS 10.8.5 on an iMac. Thanks!

Hello,
Programs that run in the background cannot address controls on the frontend. This is why you are not able to run a Program using SAP Office Integration which is a Frontend Control and can be used only with the SAP Gui. Since background process cannot make use of UI screens or actions hence it's not possible use SAP Office Integration in background processing. The reason for this is explained in note 674060. Therefore sending emails using a batch macro is not supported.
Best regards
Rico Frenzel

Error message when trying to move audio file from iTunes to iPhone 4s

I have an audio file I'm trying to put on my iPhone 4s. I can open it with iTunes, but when I try to move it to my iPhone, I just get a message that it can't be moved "because it can't be played on this iPhone." My itunes and iphone are both up to date. I have iCloud activated but nothing has moved to my iPhone either

Developing for iphone can be amazingly complicated and frustrating. (even before you start coding). The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious.
I solved the problem of the "Entitlements are not valid". The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings. (ie. com.yourdomainname.yourappname). After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad.
I wish the error message had been a little more descriptive. Could have saved me a whole day.
I hope this helps others. But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

The operation can't be completed because an unexped error occurred (error code-50). This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive. Then this morning I can't open my project file. What to do?

Message: The operation can't be completed because an unexped error occurred (error code-50).
This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.
Then this morning I can't open my project file. I get this message: The project appears to be damaged, it cannot be opened.
What should I do!??
I have moved my project onto 2 different external hard-drives now.

Hi There,
After looking around for this error, it seems to be related to OS, we would recommend you to contact Apple support for this.
Thanks,
Atul Saini

I am new with iMac and I am trying to copy some file from my external HDD but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

Keep getting error 45054 when trying to download my purchases from cloud.

I keep getting error 45054 when trying to download my purchases from cloud.

Follow the instructions in this support article.

Can't copy some files from Windows 7 to Mac OSX over network

Hi,
I'm running the latest version of Max OSX v10.8.4 on a brand new Macbook Pro.
I have followed the setup instructions at http://www.7tutorials.com/how-change-workgroup-mac-os-x-easy-networking to access my Macbook from Windows, and http://www.howtogeek.com/howto/24950/how-to-share-a-folder-in-os-x-with-windows/ to share some folders from my Macbook to Windows.
I am now trying to copy some files from my Windows 7 Pro (SP1) computer to my Mac, and have hit the following problems:
I can view my Macbook in my list of local networked computers on WIndows, but I cannot access it. Clicking on it causes Windows 7 to try and access it, but then I get a message after a minute saying the network path could not be found. However, if I manually enter the IP address of my Macbook in the Windows address bar (\\192.168.0.191), I can view and access all the shared folders. I can never access the Macbook via it's computer name (\\MACBOOK-ROB).
I cannot copy some files from Windows to my Macbook shared folders via Windows. There is nothing to distinguish these files from the hundereds of other files that I have successfully copied to my Macbook. They are pictures and music with no special characters in the filenames, not overly long filenames or folder paths, no access restrictions, or any other security restriction that I can see. However, every single attempt to copy these files to my Macbook results in WIndows reporting that access to the destination was denied.
I have tried both these above scenarios on WiFi and Ethernet, and the results are the same.
So:
Why am I unable to access my Macbook by it's computer name on the network? How can Windows see it, but not access it?
What are the limitations on transferring files over SMB that is (presumably) causing these specific files to fail?
Thanks for any help you can offer.

I have a fix for inability to copy files. I had the same problem moving a lot of old files across my LAN from a Windows XP machine to a Mac Mini running Mountain Lion. After confirming copy of some special file, I would get an error that terminated the copy operation, and info on the Mac side would show a locked folder.
I finally decided to eliminate all special files on the Windows side, before copying, by running
attrib -s -h -r /s /d [drive or folder]\*.*
in a command window. Running attrib /? tells what the arguments mean, but it doesn't explain that you need the *.* to make the command go through the hierarchy clearing the special attributes on all the files.
After I did that, and then used drag and drop between two Windows Explorer windows (one on the Windows drive, on on the target drive on the Mac), the whole move operation ran to completion without stopping either for error or to ask for confirmation.
I do not have a fix for the inability to access some computers by name rather than by IP address. I'm looking into the possibility of activating bind on the Mac but I haven't done anything yet.

Can't Copy Large Files To External Drive

This is driving me nuts. I'm running 10.4.11 with an external Newer Tech Ministack 320GB hard drive that's only ten weeks old. Yesterday I downloaded some large (50mb or so) QuickTime files to my desktop, which is to say my internal drive. I then tried to copy them to my external drive, since that's where I keep my movie files since they take up so much room. One copied over without any trouble, but numerous attempts to copy the others result in the process freezing after anywhere from 1/4 to 3/4 of the data has been copied, or else I get the "error 36" message. My first thought was that the external drive was failing, but I can copy small movie files (10mb or so) back and forth between the two drives with no problem. What's the point of having a large external drive if you can't use it for your large files? Repaired permissions on both drives, no improvement.

I have repaired permissions and run disk repair on the internal drive as well. Yes, I've played the clips in their entirety, but I'm going to do it again and look for any hiccups. That's an interesting theory and I want to check it out.
It has occurred to me that a workaround, although it by no means addresses the underlying problem, is to use QuickTime Pro to chop the clips up into several smaller files, copy them to the external drive, and then reassemble them via QuickTime Pro on the external drive.
FWIW, I neglected to mention (although I don't know if it's pertinent or not) that immediately after installing the external drive ten weeks ago I used SuperDuper to clone my entire internal drive onto the external firewire drive. I then erased the movies from the internal drive, which was bumping up against maximum capacity. I am able to boot from the external drive, and I want to retain this capacity should the internal drive (which is, after all, six and a half years old) fail.

When I download a Numbers file from iCloud to my Mac, it isn't the latest version.

Today I worked on a Numbers file on my iPad 2 from 4:40 pm to 6:30 pm. A few hours later, when I tried to download the file from iCloud to my Mac, none of today's changes appeared. When I looked at it again on the iPad, on the main Numbers page where you choose the file you want, it showed a time of 4:43 pm associated with the file. However, when I opened it, the two hours of work was still there even though the time was off. I tried sending the file as an email and when I opened the email attachment on my Mac, all of today's changes were there. So the new changes are captured when emailing a file but not when downloading it.
It almost seems as if the file hasn't made it off the iPad and into iCloud, but I can't find any information on ways to force that or know if it's been done.

Two possible problems. 
1. BlackBoard never supports the latest version of Firefox, for a few reasons. Some schools don't run the latest version of BlackBoard Vista or Campus Edition. Also, BlackBoard upgrades seem to be tied to the "school year" cycle, the changes they make to improve and update their software seem to be rolled out for the fall term so that changes aren't being made during the normal "school year" and possibly causing problems for the schools. That also may be a function of their contract / payment cycles with the schools that use their programs.
http://www2.blackboard.com/tuneup/viewpage?name=tuneup_browser_tuneup_windows_firefox 
Select the link for the version of WebCT Vista or Campus Edition ''(version info is usually at the bottom of each page, in the footer)'' that your school is using, then see which version of Firefox is compatible.
Depending upon which version of WebCT your school is using, you will have to use Firefox 3.6.x, Firefox 3.5.x, or Firefox 3.0.x when accessing the Blackboard site.
My advice is to install the Firefox Portable version that you need for Blackboard on your computer, and use that installation only for Blackboard. Continue to use 4.0.1 for all other web browsing. 
http://portableapps.com/apps/internet/firefox_portable/localization#legacy
2. Firefox uses a Plugin ( you have Office Plugin for Netscape Navigator installed) to open files that aren't "internet files", like word processing documents. 
I can't help you directly with Office, as I use Open Office, but there should be a preference for that Plugin within your Office preferences or options under something like Internet, to have those files '''Display documents in browser'''. 
Or see this to make sure you have your "file type" set correctly. 
http://support.mozilla.com/en-US/kb/Managing+file+types

It is very difficult to import audio files from extern drives (NAS) into the new garageband

it is very difficult to import audio files from extern drives (NAS) into the new garageband.

Are you trying to open an audio file in GarageBand or a GarageBand project?
To open an audio file drag it from your NAS to a real-instrument track in GarageBand.
If you are trying to open a GarageBand project - can you open the same project, if you copy it to your system drive?
Trying Google translate -
Bent u probeert om een audiobestand in GarageBand of een GarageBand-project te openen?
Om een audiobestand slepen uit uw NAS naar een real-instrument track in GarageBand openen.
Als u probeert een GarageBand-project te openen - kunt u hetzelfde project opent, als u het kopiëren naar uw systeem schijf?

Error -36 when trying to copy AVI files from External Drive to Mac

Similar Messages

Maybe you are looking for