Error -36 when trying to read an avi file on a smb network drive

Hello,
I am connected to a network harddrive through a samba connection.
The problem occurs after the connection, when I try to read a file an error -36 occurs.
I have check that my connection and the network disk belong to the same windows group.
Thanks in advance

diemat
Loads are having this issue - I posted on this thread and I still don't think there is a single solution.
There are a number of work arounds listed you can try on there.
Most seem to be resigned to another update
http://discussions.apple.com/thread.jspa?threadID=2139000
Regards
Stuart

Similar Messages

  • Error message when trying to read ebook E_AUTH_BAD_DEVICE_KEY_OR_PKCS12

    has anyone had this happen, error message when trying to read ebook E_AUTH_BAD_DEVICE_KEY_OR_PKCS12

    deauthorize (shift-ctrl-d) and then restart ade.  you will be prompted to re-authorize.

  • I get error 23132 when trying to open a M4v file

    I use to be able to play m4v files on both iTunes and Quick Time 7. Suddenly, after upgrading iTunes, I get error 23132 when trying to open a M4v file. How do I fix it to view the files on QuickTime?

    There is software you installed to work with your company's cloud service, update it or talk to the developer.
    If it's Apple's software,  then run through this list of fixes.
    ..Step by Step to fix your Mac

  • New computer with lightroom 5.7 installed old computer has 3.6 installed.The new version has a conflict when trying to read the external harddrives.Old sees it as drive (I) but new sees it as drive(E).When I try to rename external drive it comes up as LaC

    New computer with lightroom 5.7 installed old computer has 3.6 installed.The new version has a conflict when trying to read the external harddrives.Old sees it as drive (I) but new sees it as drive(E).When I try to rename external drive it comes up as LaCie (E) (I) so I cannot get it to change the name for lightroom to read it with all the previous edits-please help all advice appreciated.

    lotta stuff going on.  I'm in the office now and don't expect a client for about 45 minutes.  Want to walk thru this via skype or ichat?  email me directly if you do.  [email protected]
    If not, post back and I'll try and walk thru these things. 
    Also, if you want to email me the project, I'll see if I can open it here. 

  • Error 7 occurred when trying to read a spreadsheet file in LabVIEW

    Hi,
    I got the message (in bold) below when I was trying to read a text file type. I also include a snippet of my block diagram.
    Error 7 occurred at Open File+.vipen File
    Possible reason(s):
    LabVIEW:  File not found. The file might have been moved or deleted, or
    the file path might be incorrectly formatted for the operating system.
    For example, use \ as path separators on Windows, : on Mac OS X, and /
    on Linux. Verify that the path is correct using the command prompt or
    file explorer.
    I really appreciate if someone can help me. Thanks.
    Attachments:
    read from spreadsheet.png ‏70 KB

    Hi Ravens Fan,
    Thanks again for your valuable input. I replaced the string manipulation functions with a path control. I think it works coz I can see the waveform data, rms values etc. And then you said if it works, do a Path to String on that...and I'm not exactly sure how to do that. I attached a snippet of the modified vi. you may refer the original vi snippet in my previous email.
    I appreciate it if you could help me again.
    Thanks.
    Attachments:
    read from spreadsheet2.png ‏283 KB

  • Getting an error 33162 when trying to read analog input on FP

    I am getting a error when trying to do a simple analog input read using Field Point. I have a FP-2000 network module and am trying to read channel 0 at FP-TB-10 @3 which has an AI-C420 analog input module in place. There is no definition for the error and I can read the signal from Field Point Explorer just fine.
    I have downloaded the example continuous read vi from the web site and it does not work either. It seems that this should not be complicated but this is not the 1st problem I have had. I will take any suggestions. Thank you.

    Mike,
    Error code 33162, "Can not connect to item on module," generally is the result of attempting to connect to an item that is not available at the first connection attempt. This is frequently the result of an ethernet network module being offline when you attempt to connect to it. Since you are able to connect from FieldPoint Explorer, I suspect something else is going on. The likeliest possibilities that I can think of are:
    1) You have more than one ethernet Comm Resource in your IAK file and you have provided the name for the wrong resource (e.g. you may have had a different IP address and created a new Comm Resourcefor the new IP address, but left the old one in place and are using the wrong one).
    2) Similar to #1 above, you changed the IP address in
    the Comm Resource but did not save the change so there is no module at the IP address it is attempting to communicate with.
    3) There is a misconfiguration in the IAK file and the FP-TB-10 shows a listing for a digital module at address 0 rather than an analog module.
    4) The module is misaddressed. I have occasionally seen instances where the protective end cover was not installed on the last terminal base and a piece of metal shorted some of the pins causing the addressing to be incorrect. Since this method of failure would also show up in FieldPoint Explorer, I do not think it is likely the root cause of your problem.
    5) You have booted the FP-20xx in Safe Mode (although FieldPoint Explorer will not work in this case so I do not think it is likely).
    Note: If you had successfully connected and then lost the connection, the error code is 33163, "The connection to the module has been broken."
    Regards,
    Aaron

  • Archive Utility brings up error message when trying to unarchive protected zip file

    Hey there,
    I've been zipping images with password protection using different applications, some with a Lightroom Plug-In Zip-Exporter, some with a stand alone app such as "Archiver". Now when I try to unzip these images on OSX 10.6 the Archive Utility brings up an the error: "Unable to unarchive "Name of File" into "Desktop". (Error 1 - Operation not permitted.) I'm logged in with an admin account. I tried this on a macbook pro and on an imac, both 10.6, same problem. Now when I try to unzip the file using third party such as Stuffit expander or Archiver, it unzips the files without a problem.
    any idea what's wrong with the OSX Archive Utility?

    Nothing's wrong with it except that it doesn't support encrypted .zip files.  You'll just have to use third-party software, or a Terminal command, to unzip those.

  • Error messages when trying to install Microsoft Works 4.0 on my Hard Drive

    My internal hard drive crashed (died) with all of my applications (programs) on it. I have successfully installed back all of my applications from the original program disks with the exception of Microsoft Works Vers. 4.0c. Works will not install the original software back on my HD even though I have the original Works program floppy disks. I get the following error messages when I try to run the Installer program on the Works program floppies. 1st error message: Microsoft setup was not completed successfully. 2nd error message: Setup was unable to locate a valid setup table file and cannot proceed without one.
    When the crash occurred I had my system folder running OS 9.1 on my other Internal HD so I did not have any startup issues, etc. (thankfully)
    I have a gut feeling that because I still have some Works files in my system folder they may be causing the setup program from running properly.
    I am hoping someone knows a work around to help me get Works installed back on my HD.

    And that message is exactly? I hope you are aware that you are trying to install software from the stoneage and it may simply no longer be compatible...
    Mylenium

  • Error message when trying to upload a pdf file to a form

    A user was trying to upload a pdf file to a form I created (Contractor Vanpool Application Form). The parameters I set, was that it had to be a pdf form, less than 20MB and a single file. She met these parameters, but when she hit the submit button, she received this dialogue box message:  Warning: JavaScript Window - File Attachments are not supported in FormsCentral PDF forms.  Please contact the form author to send the file attachments another way. This dialogue box prevented her from even getting as far as selecting the file and uploading. Another user was succesfully able to upload a form, so I know this is working.  So I changed the parameters to allow multiple files in any format, and she still had a problem.
    She states is using windows 95, Internet Explorer. Help, Michelle

    In Form Central, when I add a field, I select the Add File Attachment icon (see screen shot below - it is the 10th icon from the left, the paperclip over a sheet):
    Then it allows me to fill in the field, describing the file to upload, and the properties to the right defining the file size limit, type of file and other properties.  This is all done through formscentral, thus allowing a user in my form to upload a file that is attached to the form when submitted.

  • Error 0x8078002A when trying to back up windows 7 to my seagate hard drive

    Hi,
    I keep getting this error when trying to back up windows 7 to my new seagate hard drive. It says ' one of the files could not be created... because of an I/O device error.
    I have tried restarting the computer and then backing up but that didnt work.
    What do I need to do?
    Regards
    Ellie

    Hi,
    Firstly follow these steps to check the disk:
    1. Type cmd.exe in the start search box, and click Run as administrator.
    2. At a command prompt, type the following command, and then press ENTER:
    Chkdsk /R X:
    Note In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
    3. Press Y when you are prompted to check the disk the next time that the system restarts.
    4. Close all applications, and then restart the computer.
    Note During the restart process, Windows checks the disk for errors, and then Windows starts.
    5. After the computer restarts, repeat steps 1 through 4 for the other volume, and then rerun the backup operation.
    And then backup again for test.
    If the issue persists, follow this thread to see if it works:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/unable-to-create-image-0x8078002a-and-io-device/8193c7f9-da80-4656-9589-9e60cef182f1
    Karen Hu
    TechNet Community Support

  • Error code when trying to move capture scratch files

    I tried moving the capture scratch files for 10 interview files I have created from my documents to my external hard drive. I was able to move the render files without any problem but each time I try to drag a capture file from my documents and place it in the capture folder on my external hard drive I get the following error " Sorry, the operation could not be completed because an unexpected error occurred. Error Code (0)."
    The external drive still has 261 GB empty, so not sure what the problem is.

    What would be the best way to approach this. Can I buy a firewire external hard drive and connect both it and the USB drive to my computer and move files from the USB drive to the firewire drive? And also move the capture files to the firewire drive?
    Will my local apple store be a good place to buy the correct drive?
    Thanks for working me through this.

  • "Input contract violation" error message when trying to import a .wav file into AE?

    I am trying to import a .wav file into AE and keep getting an "input contract violation" message from the program followed by it shutting down. If it means anything, I bought the song online, but it has been paid for and I downloaded the .wav file after my purchase. Any idea of why this may be happening? Are there any particular settings which may be mandatory on the project timeline to import a 3min song? Thank you!

    YOu have not provided any system info, not told us what version of AE you use, your audio setting, what specifics in the audio file and a million other things. See how it may not be possible for anyone to tell you anything beyond "Your computter sucks!" ???
    Mylenium

  • Get an error message when trying to "read more" in my iWeb posting

    I just installed the latest software updates and now I get this message when I click on "Read More" in my iWeb page
    but we can't find the iWeb page you've requested. It's possible that:
    · The address was entered incorrectly. Check your spelling and try again.
    · The .Mac member of this name has either created a page and removed it or has never published an iWeb site.
    · There is no .Mac member of this name. If you'd like this member name for yourself, sign up for a .Mac account right now and have your own iWeb site in minutes.
    This seems to only happen when I use Safari and not when I use Firefox. It was working fine in both until I installed the software updates.
    Anyone know why or what I should do?

    In the course of your troubleshooting to date, have you worked through the following document?
    iTunes Store: "An unknown error occured (-9808)"

  • Premiere Gives my a generic error code when trying to read my canon xf files!

    Creative cloud is really starting to peave me....Does anyone have any suggestions on why this is happening?
    Ive been discounected six times while trying to call them...They are not playing nice.  They can't seem to help
    my pop up reads
              The importer reported a generic error
    Thanks for your help

    Have you tried the Premiere Pro forum?
    e.g. http://forums.adobe.com/message/4913250

  • I'm getting an error message when trying to download a PDF file. Its says that 'FoxitReaderOCX.ocx failed to load'? What do I need to do. I've reloaded both Adobe Reader and FoxitReader

    Corel says that it is not their problem.

    Try disabling the Adobe PDF Plug-In For Firefox and Netscape "9.4.1" and make sure FoxIt is set to handle PDF files. <br />
    http://support.mozilla.com/en-US/kb/Managing+file+types

Maybe you are looking for