Error 3880, at my wit's end

I've been searching these forums for months, trying to find a solution for my problem. And I've almost given up!The CD starts to burn, and then iTunes cancels burning. The Nero Burning software that I have behaves the same way, except iTunes says "Unexpected error [3880]" every time. This began happening regularly in March, about a week after I successfully burned another CD. Any help that anyone could offer would be MUCH appreciated! I've run iTunes diagnostics and include the results below:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 4300
iTunes 7.0.1.8
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
LowerFilters: PxHelp20 (2.0.0.0), MxlW2k (1.1.0.121),
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: 16MB ATI Rage 128 Ultra\1002-5446-22
IDE\DiskST320413A______________________________3.39___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomNEC_DV-5800A___________________________1.0A___, Bus Type ATA, Bus Address [0,0]
USBSTOR\CdRomARTEC__WRR-4848_______1.00, Bus Type USB
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
Current user is an administrator.
D: _NEC DV-5800A, Rev 1.0A
Audio CD in drive.
Found 10 songs on CD, playing time 28:09 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:53:70
Track 3, start time 06:56:67
Track 4, start time 10:02:00
Track 5, start time 11:46:65
Track 6, start time 14:18:62
Track 7, start time 18:36:50
Track 8, start time 21:22:47
Track 9, start time 23:34:57
Track 10, start time 26:08:32
Audio CD reading succeeded.
Get drive speed succeeded.
E: ARTEC WRR-4848, Rev 1.00
Audio CD in drive.
Found 11 songs on CD, playing time 49:08 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:16:39
Track 3, start time 07:15:41
Track 4, start time 12:24:33
Track 5, start time 17:15:03
Track 6, start time 23:02:68
Track 7, start time 26:41:72
Track 8, start time 31:12:00
Track 9, start time 36:15:35
Track 10, start time 40:07:04
Track 11, start time 44:48:31
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 12 16 20 24 32 40 48.
The drive CDRW speeds are: 8.
The last failed audio CD burn had error code 4880(0x00001310). It happened on drive E: ARTEC WRR-4848 on CDR media at speed 8X.

Would updating Norton have affected iTunes's burning ability? Because I believe I updated the anti-virus at around the same time that a lot of things started going wrong with other programs. ;)
hmmmmm. i'm more accustomed to seeing reports of folks having trouble with importing after a Norton install (or an itunes install/upgrade on a PC running Norton). that's usually related to the issue discussed in this Symantec troubleshooting document:
iTunes cannot connect to the Music Store or Shared Music after installing Norton Internet Security
... are you getting any peculiar symptoms when you try importing commercial CDs, too?

Similar Messages

  • Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding [and I'm at my wit's end!]

    I originally posted this question to the community section and was advised to post it here.  Please bear with me as this will be a long post.  I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
    taken and the results of several diagnostic tools and logs.
    I have a Sony VAIOS VPCEBB33FM lap top since 2011.  I have had this issue on an off for a long time.  I'm at my wit's end.  Any new insights or suggestions would be greatly appreciated.
    Scenario Details
    1)  Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
    2)  I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
    3)  Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
    4) Once in a while,  the built-in wireless adapter is not found and I have to reinstall the driver.  Also the diagnostic tool has had to reset my adapter on an increasing basis.
    5)  I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop.  Even though I've been online on an infrequent basis it worked just fine for a while. Now that
    I've been online a bit more I'm having the same issues again.
    Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
     1) Restarting my adapter
     2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
     3)  Using the IP Config in Command Prompt
         ipconfig /flushdns
         ipconfig /registerdns
         ipconfig /release
         ipconfig /renew
     4) Using the NetSh reset in Command Prompt and restarting my laptop
         netsh int ip reset c:\resetlog.txt
         netsh winsock reset
         ipconfig /flushdns
         [restart laptop]
     5)  Configuring the TCP/IP in several settings
        Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
        I have used the following settings:
           a) Obtain an DNS server address automatically
           b) OpenDNS
               208 67 222 222
               208 67 220 220
           c) Google DNS
               8 8 8 8
               8 8 4 4
     6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014.  It still did not resolve the issue.  My laptop
    manufacturer as not come up with an driver update for my adapter since 2010.  I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
    instead and frankly it didn't make much of a difference when I did it the first time.
     7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
           Computer Browser [changed from manual to automatic]
           DHCP Client [already set to automatic]
           DNS Client [already set to automatic]
           Network Connections [already set to automatic]
           Network Location Awareness [changed from manual to automatic]
           Remote Procedure Call (RPC) [already set to automatic]
           Server [already set to automatic]
           TCP/IP Netbios helper [already set to automatic]
           Workstation [already set to automatic]
    ...and I'm still having DNS issues.
    My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
    Avast Anti-Virus with Microsoft Network Firewall.  I've had DNS issues with both anti-virus/firewall set ups.
    Below are the results from the diagnostics and tests that I've ran.
    Windows Network Diagnostics
    Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
    Contact your network administrator or Internet service provider (ISP) Completed
    Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
    Details about network adapter diagnosis:
    Network adapter Wireless Network Connection driver information:
       Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
       Manufacturer  . . . . . . . . . : Intel Corporation
       Provider  . . . . . . . . . . . : Intel
       Version   . . . . . . . . . . . : 13.2.1.5
       Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
       Inf File Date . . . . . . . . . : Monday, June 14, 2010  9:05:44 AM
       Section Name  . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
       Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
       Instance Status Flags . . . . . : 0x180200a
       Device Manager Status Code  . . : 0
       IfType  . . . . . . . . . . . . : 71
       Physical Media Type . . . . . . : 9
    Informational Diagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    Information for connection being diagnosed
     Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
     Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
     Interface type: Native WiFi
    Connection incident diagnosed
     Auto Configuration ID: 1
     Connection ID: 1
    Connection status summary
     Connection started at: 2015-03-07 19:57:14-186
     Profile match: Success
     Pre-Association: Success
     Association: Success
     Security and Authentication: Success
    List of visible access point(s): 22 item(s) total, 22 item(s) displayed
            BSSID        BSS Type PHY    Signal(dB)    Chnl/freq    SSID
    60-02-92-C6-D3-E8    Infra     <unknown>    -62        11     HOME-C7D4-2.4
    60-02-92-A1-75-E0    Infra     <unknown>    -58        6     HOME-B917-2.4
    00-1D-D5-D5-34-F0    Infra     <unknown>    -73        6     HOME-34F2
    60-02-92-A1-75-E1    Infra     <unknown>    -58        6     (Unnamed Network)
    06-1D-D5-D5-34-F0    Infra     <unknown>    -78        6     xfinitywifi
    C4-27-95-C9-C4-2D    Infra     <unknown>    -57        1     HOME-C42D
    02-1D-D5-D5-34-F0    Infra     <unknown>    -74        6     (Unnamed Network)
    00-0D-97-07-E0-79    Infra     g    -75        6     (Unnamed Network)
    00-1D-CF-2A-44-C0    Infra     <unknown>    -86        6     HOME-44C2
    02-1D-CF-2A-44-C0    Infra     <unknown>    -86        6     (Unnamed Network)
    F8-E4-FB-3C-87-A2    Infra     <unknown>    -89        6     YVNM7
    06-1D-CF-2A-44-C0    Infra     <unknown>    -87        6     xfinitywifi
    0C-F8-93-7A-13-50    Infra     b    -87        6     PKennedy
    06-F8-93-7A-13-50    Infra     b    -89        6     xfinitywifi
    02-F8-93-7A-13-50    Infra     b    -87        6     (Unnamed Network)
    E0-88-5D-C8-A9-DC    Infra     <unknown>    -80        1     HOME-A9DC
    E2-88-5D-C8-A9-DD    Infra     <unknown>    -79        1     (Unnamed Network)
    16-CF-E2-43-0B-30    Infra     <unknown>    -88        1     xfinitywifi
    60-02-92-F0-A8-C0    Infra     <unknown>    -90        11     HOME-96A6-2.4
    60-02-92-C6-D3-E9    Infra     <unknown>    -63        11     (Unnamed Network)
    02-1D-D4-EB-87-00    Infra     <unknown>    -88        11     (Unnamed Network)
    06-1D-D4-EB-87-00    Infra     <unknown>    -88        11     xfinitywifi
    Connection History
     Information for Auto Configuration ID 1
      List of visible networks: 13 item(s) total, 13 item(s) displayed
      BSS Type PHY    Security    Signal(RSSI)    Compatible    SSID
      Infra     <unknown>    Yes        63    Yes        HOME-C7D4-2.4
      Infra     <unknown>    Yes        70    Yes        HOME-B917-2.4
      Infra     <unknown>    Yes        43    Yes        HOME-34F2
      Infra     <unknown>    Yes        70    Yes        (Unnamed Network)
      Infra     <unknown>    No        40    Yes        xfinitywifi
      Infra     <unknown>    Yes        71    Yes        HOME-C42D
      Infra     g    No        43    Yes        (Unnamed Network)
      Infra     <unknown>    Yes        28    Yes        HOME-44C2
      Infra     <unknown>    Yes        20    Yes        YVNM7
      Infra     b    Yes        21    Yes        PKennedy
      Infra     <unknown>    Yes        33    Yes        HOME-A9DC
      Infra     <unknown>    Yes        35    Yes        (Unnamed Network)
      Infra     <unknown>    Yes        16    Yes        HOME-96A6-2.4
      List of preferred networks: 3 item(s)
       Profile: xfinitywifi
        SSID: xfinitywifi
        SSID length: 11
        Connection mode: Infra
        Security: No
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: Yes
       Profile: HTC Portable Hotspot 9F50
        SSID: HTC Portable Hotspot 9F50
        SSID length: 25
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
       Profile: belkin.332
        SSID: belkin.332
        SSID length: 10
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
     Information for Connection ID 1
     Connection started at: 2015-03-07 19:57:14-186
      Auto Configuration ID: 1
      Profile: xfinitywifi
      SSID: xfinitywifi
      SSID length: 11
      Connection mode: Infra
      Security: No
      Pre-Association and Association
       Connectivity settings provided by hardware manufacturer (IHV): No
       Security settings provided by hardware manufacturer (IHV): No
       Profile matches network requirements: Success
       Pre-association status: Success
       Association status: Success
        Last AP:  06-1d-d5-d5-34-f0
      Security and Authentication
       Configured security type: Open
       Configured encryption type: None
       802.1X protocol: No
       Key exchange initiated: Yes
        Unicast key received: No
        Multicast key received: No
       Number of security packets received: 0
       Number of security packets sent: 0
       Security attempt status: Success
     Connectivity
       Packet statistics
        Ndis Rx: 2068
        Ndis Tx: 2543
        Unicast decrypt success: 0
        Multicast decrypt success: 0
        Unicast decrypt failure: 0
        Multicast decrypt failure: 0
        Rx success: 3954
        Rx failure: 0
        Tx success: 537
        Tx failure: 4
        Tx retry: 2
        Tx multiple retry: 2
        Tx max lifetime exceeded: 0
        Tx ACK failure: 18
       Roaming history: 0 item(s)
    InformationalDiagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    For complete information about this session see the wireless connectivity information event.
    Helper Class: Auto Configuration
     Initialize status: Success
    Information for connection being diagnosed
     Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
     Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
     Interface type: Native WiFi
    Result of diagnosis: There may be problem
     Network Connection details from Command Prompt  (some info hidden for security reasons)
    Connection-specific DNS Suffix:
    Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
    Physical Address: ‎00-23-15-54-19-B8
    DHCP Enabled: Yes
    IPv4 Address: 192.168.X.XX
    IPv4 Subnet Mask: 255.255.XX.X
    Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
    Lease Expires: Saturday, March 07, 2015 8:24:44 PM
    IPv4 Default Gateway: 192.168.X.X
    IPv4 DHCP Server: 192.168.X.X
    IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
    IPv4 WINS Server:
    NetBIOS over Tcpip Enabled: Yes
    Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
    IPv6 Default Gateway:
    IPv6 DNS Server:
    Results of Ping and Trace Route in Command Prompt
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>ping 127.0.0.1
    Pinging 127.0.0.1 with 32 bytes of data:
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Ping statistics for 127.0.0.1:
        Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\Windows\system32>ping www.youtube.com
    Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
    Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
    Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
    Request timed out.
    Request timed out.
    Ping statistics for 173.194.121.6:
        Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 19ms, Maximum = 24ms, Average = 21ms
    C:\Windows\system32>ping 74.125.239.34
    Pinging 74.125.239.34 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
    Request timed out.
    Ping statistics for 74.125.239.34:
        Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
    C:\Windows\system32>ping www.hotmail.com
    Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
    Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
    Request timed out.
    Request timed out.
    Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
    Ping statistics for 65.55.157.204:
        Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 111ms, Maximum = 1537ms, Average = 824ms
    C:\Windows\system32>ping 207.46.11.236
    Pinging 207.46.11.236 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    Ping statistics for 207.46.11.236:
        Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
    C:\Windows\system32>tracert www.youtube.com
    Tracing route to youtube-ui.l.google.com [173.194.121.5]
    over a maximum of 30 hops:
      1    19 ms    13 ms    17 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    13 ms    13 ms    27 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
      3    20 ms    26 ms    21 ms  he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
      4    18 ms    34 ms    22 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5    19 ms    18 ms    18 ms  50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
      6    35 ms    18 ms    18 ms  209.85.249.217
      7    21 ms    19 ms    19 ms  72.14.233.93
      8     *        *        *     Request timed out.
      9     *     2509 ms   677 ms  iad23s25-in-f5.1e100.net [173.194.121.5]
    Trace complete.
    C:\Windows\system32>tracert 74.125.239.34
    Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
    over a maximum of 30 hops:
      1    54 ms    23 ms    12 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    22 ms    19 ms    17 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    19 ms    19 ms    18 ms  he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
      4    18 ms    18 ms    18 ms  he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
      5    19 ms    18 ms    22 ms  50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
      6    22 ms    36 ms    19 ms  209.85.249.217
      7    26 ms    23 ms    25 ms  209.85.143.112
      8     *        *        *     Request timed out.
      9     *        *        *     Request timed out.
     10   972 ms     *        *     216.239.51.97
     11   148 ms    97 ms    95 ms  216.239.46.241
     12   324 ms   130 ms   432 ms  209.85.246.252
     13     *        *        *     Request timed out.
     14  1403 ms   101 ms   126 ms  nuq04s19-in-f2.1e100.net [74.125.239.34]
    Trace complete.
    C:\Windows\system32>tracert www.hotmail.com
    Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
    over a maximum of 30 hops:
      1    13 ms    13 ms    25 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    13 ms    15 ms    13 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    20 ms    19 ms    17 ms  he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
      4    17 ms    20 ms    20 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5    17 ms    18 ms    38 ms  as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
      6    18 ms    18 ms    36 ms  ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
      7     *        *        *     Request timed out.
      8     *     2191 ms    35 ms  ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
      9     *        *        *     Request timed out.
     10     *        *        *     Request timed out.
     11    86 ms    84 ms    84 ms  ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
     12    86 ms    86 ms    87 ms  ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17    87 ms    84 ms    85 ms  origin.by173w.bay173.mail.live.com [65.55.157.144]
    Trace complete.
    C:\Users\C.Cunningham>tracert 207.46.11.236
    Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
    over a maximum of 30 hops:
      1    16 ms    16 ms    19 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    18 ms    13 ms    13 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    21 ms    19 ms    21 ms  he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
      4    18 ms    21 ms    18 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5     *        *        *     Request timed out.
      6     *        *        *     Request timed out.
      7     *        *        *     Request timed out.
      8     *        *        *     Request timed out.
      9     *        *        *     Request timed out.
     10     *        *        *     Request timed out.
     11     *        *        *     Request timed out.
     12     *        *        *     Request timed out.
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17     *        *        *     Request timed out.
     18     *        *        *     Request timed out.
     19     *        *        *     Request timed out.
     20     *        *        *     Request timed out.
     21     *        *        *     Request timed out.
     22     *        *        *     Request timed out.
     23     *        *        *     Request timed out.
     24     *        *        *     Request timed out.
     25     *        *        *     Request timed out.
     26     *        *        *     Request timed out.
     27     *        *        *     Request timed out.
     28     *        *        *     Request timed out.
     29     *        *        *     Request timed out.
     30     *        *        *     Request timed out.
    Trace complete.
    Results of Intel WiFi Manual Diagnostics
    Test Name                 Test Result   Test Summary
    Hardware Test           Passed        Wireless Hardware is enabled
    Driver Test                 Passed        Diver is loaded. NETwNs64 Version 13.3.0.24
    Radio Test                  Passed       Radio is ON
    Scan Test                   Passed       There are 25 Networks available to connect
    Association Test        Passed       Associated
    Authentication Test   Passed       Authenticated
    Signal Test                Passed       Signal Quality: Poor
    Ping Test                  Failed          No Reponse: default gateway, DHCP server
    I hope this information is enough to get to the root of this problem once and for all.  Please let me know if you any other information such as event logs or statistics. 
    Thanks in advance.

    Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
    #Event  Source  Time     
    Error Severity    Domain               
    User      Description
    45           EvtEngine           
    3/8/2015 20:40  Success               
    Connection         SYSTEM               
    iAMT - Failed to read Windows Events Log
    46           S24EvMon          
    3/8/2015 20:41  Information       
    AppDriver          
    SYSTEM               
    Getting List of adapters.
    47           S24EvMon          
    3/8/2015 20:41  Information       
    AppDriver          
    SYSTEM               
    Intel adapter(s) found.
    156         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
    157         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
    158         S24EvMon          
    3/8/2015 20:47  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
    159         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    160         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
    161         S24EvMon          
    3/8/2015 20:47  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    162         S24EvMon          
    3/8/2015 20:47  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -77
    163         S24EvMon          
    3/8/2015 20:49  Information       
    TCP/IP  SYSTEM               
    VoIP: Got link down - deleting flows .
    164         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
    165         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    166         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    167         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
    168         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    169         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    170         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
    171         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    172         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
    173         S24EvMon          
    3/8/2015 20:49  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    174         S24EvMon          
    3/8/2015 20:49  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -81
    175         S24EvMon          
    3/8/2015 20:50  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
    176         S24EvMon          
    3/8/2015 20:50  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
    177         S24EvMon          
    3/8/2015 20:50  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    178         S24EvMon          
    3/8/2015 20:50  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -80
    179         S24EvMon          
    3/8/2015 21:03  Information       
    Driver    SYSTEM               
    RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
    186         S24EvMon          
    3/8/2015 21:21  Information       
    General               
    SYSTEM               
    DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
    187        
    S24EvMon          
    3/8/2015 21:21  Information       
    General               
    SYSTEM               
    DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31)

  • Error : No valid R/3 Back-end system

    Hi CRM gurus,
    I'm trying to connect SAP CRM 5.0 to SAP ECC 5.0.
    When I launch trx R3AS for downloading the first object of the list coming from Best Practise (DNL_CUST_ACGRPB), I am getting the above error: "No valid R/3 Back-end system."
    Now the point is that RFCs work smoothly, administration console as well and R/3 view CRMRFCPAR was filled correctly.
    Where is the problem? I'm looking into, but without results.
    Any suggestions in this issue will be rewarded.
    Regards,
    AndreA

    Many thanks Praveen,
    I have carried out all the checks in the tables and it seems that everything is fine!.
    Creating a RFC Destication for CRM in R/3
    Maintain Table CRMRFCPAR and CRMCONSUM?
    In Table CRMPAROLTP, Parameter "crm release" should set to your CRM version ( ex 500 for crm 5.0)
    Maintain table TBE11, APPI should be NDI(new dimension integration),A yes
    I don't really know where the error could lay.
    Andrea

  • My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    Hi,
    To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
    Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
    Give the datasource name, then the database name.
    You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
    There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
    It will be like this <service name> <portnumber>/tcp
    Hope this helps...
    best wishes,
    Nish

  • Error: unexpected XML reader state. expected: END but found: START:

    I am getting following error while invoking method 'GetVersionInfo' (.net web service over dll) which takes one input parameter(string) and gives two output parameters(both short):
    ERROR at line 1:
    ORA-29532: Java call terminated by uncaught Java exception: deserialization
    error: unexpected XML reader state. expected: END but found: START:
    {UPPLink}pnVersionMajor
    ORA-06512: at "SYS.UTL_DBWS", line 388
    ORA-06512: at "SYS.UTL_DBWS", line 385
    ORA-06512: at line 40
    Expected Request is as follows:
    POST /UPPLink/UPPLink.asmx HTTP/1.1
    Host: 172.16.1.38
    Content-Type: text/xml; charset=utf-8
    Content-Length: length
    SOAPAction: "UPPLink/GetVersionInfo"
    <?xml version="1.0" encoding="utf-8"?>
    <soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Body>
    <GetVersionInfo xmlns="UPPLink">
    <ignore>string</ignore>
    </GetVersionInfo>
    </soap:Body>
    </soap:Envelope>
    EXpected Response is as follows:
    HTTP/1.1 200 OK
    Content-Type: text/xml; charset=utf-8
    Content-Length: length
    <?xml version="1.0" encoding="utf-8"?>
    <soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Body>
    <GetVersionInfoResponse xmlns="UPPLink">
    <GetVersionInfoResult>
    <pnVersionMajor>short</pnVersionMajor>
    <pnVersionMinor>short</pnVersionMinor>
    </GetVersionInfoResult>
    </GetVersionInfoResponse>
    </soap:Body>
    </soap:Envelope>
    The PL/SQL code I am using is as follows:
    DECLARE
    service_ sys.utl_dbws.SERVICE;
    call_ sys.UTL_DBWS.call;
    service_qname sys.utl_dbws.QNAME;
    port_qname sys.utl_dbws.QNAME;
    operation_qname sys.utl_dbws.QNAME;
    string_type_qname sys.utl_dbws.QNAME;
    number_type_qname sys.utl_dbws.QNAME;
    retx ANYDATA;
    strEntry VARCHAR2(100);
    retx_string VARCHAR2(100);
    majorVersion NUMBER;
    minorVersion NUMBER;
    params sys.utl_dbws.ANYDATA_LIST;
    v_outputs sys.utl_dbws.anydata_list;
    BEGIN
    dbms_output.put_line('Starting Function');
    service_qname := sys.utl_dbws.to_qname(null, 'UPPLink');
    strEntry := 'vab';
    dbms_output.put_line('Creating Service');
    service_ := sys.utl_dbws.create_service(HTTPURITYPE('http://172.16.1.38/UPPLink/UPPLink.asmx?WSDL'), service_qname);
    dbms_output.put_line('Creating Operation');
    operation_qname := sys.utl_dbws.to_qname(null, 'GetVersionInfo');
    dbms_output.put_line('Calling Service');
    call_ := sys.utl_dbws.create_call(service_, null, operation_qname);
    sys.utl_dbws.set_property(call_, 'SOAPACTION_USE', 'true');
    sys.utl_dbws.set_property(call_, 'SOAPACTION_URI', 'UPPLink/GetVersionInfo');
    sys.utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
    string_type_qname := sys.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
    number_type_qname := sys.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'short');
    sys.utl_dbws.add_parameter(call_, 'ignore', string_type_qname, 'ParameterMode.IN');
    sys.utl_dbws.add_parameter(call_, 'pnVersionMinor', number_type_qname, 'ParameterMode.OUT');
    sys.utl_dbws.set_return_type(call_, number_type_qname);
    params(0) := ANYDATA.convertvarchar2(strEntry);
    dbms_output.put('Invoking with Input Parameter: ');
    dbms_output.put_line(ANYDATA.ACCESSVARCHAR2(params(0)));
    retx := sys.utl_dbws.invoke(call_, params);
    dbms_output.put_line('Invoke complete');
    majorVersion := retx.accessnumber;
    dbms_output.put_line('Major Version ' || majorVersion);
    v_outputs := SYS.utl_dbws.get_output_values(call_);
    minorVersion := ANYDATA.AccessNumber(v_outputs(1));
    dbms_output.put_line('Minor Version ' || minorVersion);
    sys.utl_dbws.release_service(service_);
    END;
    /

    Actually, the name needs to match what is specified in the WSDL file.

  • Error message MH 175 "The listing end is not allowed to be in the past"

    Hi,
            While I try to execute listing in the new article creation using particular disctribution chain, i.e. with reference to a Sales Org and distribution channel, the error message MH 175, 'The listing end is not allowed to be in the past' popped up. Can you please help me on what could be the cause for this error to be displayed.
    thank you
    regards
    prahlad

    Hi,
       Go to mm42.. enter the article number and distribution chain and then select the Listing View.... Please check the "Listed to" and "for Sale till" date is in past. if so change the date to future and try agian.
    Regards
    GK

  • TS1717 Error 42110 comes up at the end of my rental download and it wont play.

    Error 42110 comes up at the end of my rental download and it wont play.

    Hi there,
    I would recommed taking a look at the troubleshooting steps found in the article below.
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    -Griff W.

  • SQL Loader Error : ORA-01830: date format picture ends before converting en

    I am inserting following data
    BES101706     M.E. Deals     7     10/17/2006
    through control file :
    LOAD DATA
    APPEND
    INTO TABLE abc_temp
    FIELDS TERMINATED BY ' '
    TRAILING NULLCOLS
    (BATCH_NAME               ,
    SUPPLIER_NAME          ,
    SUPPLIER_NBR          ,
    INV_DATE "to_date(substr(:INV_DATE,1,10),'MM/DD/YYYY' )"
    But I am getting this error:
    ORA-01830: date format picture ends before converting entire input string
    inv_data is a date field in the database.

    I think it has to do with data format.Exactly.
    You have
    BES101706*M.E.*Deals*7*10/17/2006
    I replace each space with an asterisk. You have 5 columns according to your spec (terminated by '<space>')
    SQL Loader doesn't know that M.E. Deals is the supplier name.
    It's trying to convert 7 as the date.

  • Error 1087 extra characters found after end of program.

    Why am I getting the "error 1087 extra characters found after end of program with this code".
    If (counter == 1) {
    Next_btn.addEventListener(MouseEvent.CLICK,KMT1);
    else {
    Next_btn.addEventListener(MouseEvent.CLICK,KMT1);
    function KMT1(event:MouseEvent):void {
      gotoAndPlay("KMT1");

    thanks...the small stuff gets me every time.

  • Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

    Hi,
    Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
    This load is getting failed every day. It is a full load and records are getting transferered and added.
    when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
    Version i am using is BW 3.5
    Please let me know what will be the problem???
    Thanks,
    Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

    First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
    Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
    You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
    Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
    In the opened popup click on the tab 'Chain'.
    In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
    1. copy the variant from the popup to the variante of table rspcprocesslog
    2. copy the instance from the popup to the instance of table rspcprocesslog
    3. copy the start date from the popup to the batchdate of table rspcprocesslog
    Press F8 to display the entries of table rspcprocesslog.
    Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
    Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
    1. rspcprocesslog-log_id -> i_logid
    2. rspcprocesslog-type -> i_type
    3. rspcprocesslog-variante -> i_variant
    4. rspcprocesslog-instance -> i_instance
    5. enter 'G' for parameter i_state (sets the status to green).
    Now press F8 to run the fm.
    Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

  • Trying to publish an event to fb from iPhoto '09, 8.1.2. Getting error message: "Line 22: Opening and ending tag mismatch: meta line 0 and head".

    Trying to publish an event to fb from iPhoto '09, 8.1.2. Getting error message: "Line 22: Opening and ending tag mismatch: meta line 0 and head". Never had any trouble before. What in the world?

    See if you can export those same photos to a folder on your Desktop.
    OT

  • "Error occurred while launching. The end of the file was reached" ?

    I have OS 9.2.2 and, recently, OS X 10.3.9, installed on my machine. I have not yet transferred my Outlook Express files to MAIL. Yesterday, I was attempting to clean out my Outlook Express DELETE files when I noticed that I had hit the wrong key and was deleting my IN files. I couldn't stop the process,so I turned off my machine. Now, whenever I try to connect with Outlook Express, I get the message "Error occurred while launching. The end of the file was reached". Now, Outlook Express is no longer supported by Microsoft, so it's time to change to Safari, anyway, but I have many files in Outlook Express that I want to save. Can anything be done?

    David,
    No solutipn yet, but I'm still hopeful. However, I would appreciate your comments on the following:
    1. I still could not open Outlook Express, even after rebuilding the desktop--twice--and downloading it again. However, I just noticed that you recommended the use of a OS 9 CD, not a download. I'll look around for the CD if you feel that's the only way to go. Is it?
    2. When I downloaded the OS 9 Outlook Express, the window said to copy it to my Hard disk. I assume that means just to drag the Outlook Express icon to the top of the Hard Disk icon. Is that correct?
    3. If all else fails, what about those programs that have been around for years that facilitate the retrieval of otherwise lost files. Would such a program be helpful in this case? If so, can you mention a few of them? I want to retain some of those files, even if it means having to spend a hundred dollars or so for the necessary software.
    4. Yes, such mishaps can indeed be painful. Fortunately, although I am a bit of a fumble-fingers, the problems I have encountered since I bought my set in 1999 as the result of such clumsiness have been few. It looks like I've been lucky, but that I am paying for it now.
    iMac DV (Special Edition)   Mac OS 9.1.x  

  • I am running iTunes 11.1.4 on a iMac OSX 10.9.1 when I try to retire my iPod classic, generation 6 I get an unexpected error 1429. My iPod serial ends in V9M.

    I am running iTunes 11.1.4 on a iMac OSX 10.9.1 when I try to retire my iPod classic, generation 6 I get an unexpected error 1429. My iPod serial ends in V9M.
    Message was edited by: Normandomac

    Hi Normandomac,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    http://support.apple.com/kb/TS1372
    Cheers,
    - Judy

  • ERROR at line 1: ORA-03113: end-of-file on communication channel

    I have a DRDA gateway set up between my Oracle 10.2.0.4 instance (linux 64 bit), and a DB2 UDB instance (v 8.2 32 Bit). Within a SQLPlus session, I'm able to successfully interact with tables (select, update, delete) that do not have CLOB columns defined. However, whenever I try to access a table with a CLOB column (even doing a select on a single row), I get an end-of-file communication error and it kicks me out of my session. I can interact with the table as long as I don't include the CLOB/BLOB columns. Is there some additional configuration or memory settings I'm missing?
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> select * from mytablewithaclob@db2 where l_column= 1;
    select * from dbo.mytablewithaclob@db2 where l_column= 1
    ERROR at line 1:
    ORA-03113: end-of-file on communication channelI add the following codepage.map (as per another post) - packages are bound properly, and tables without clobs I can interact with just fine.:
    S 367 > US7ASCII
    D 13488 > AL16UTF16
    D 1200 = AL16UTF16
    M 1208 = UTF8
    MBC 1208 = 1208 1200
    column in question is defined as follows in DB2:
    mycol CLOB(1G) DEFAULT ''  NOT NULL  NOT LOGGEDAny thoughts? Much appreciated.
    Edited by: kpw on Sep 3, 2009 4:21 PM

    Unfortunately TG4DRDA 10.2.0 does not support DB2 (C)LOB datatype. A crash is a rather unpleasant way to report this inability... but that could depend on the version of TG4DRDA you use (10.2.0.1.0). I guess when you upgrade TG4DRDA to 10.2.0.4.0 you will get a proper error message (ORA-28527 - datatype conversion error).
    As workaround you could:
    - create a view on the DB2 table and exclude the (C)LOB columns
    - move/copy the (C)LOB data into a TG4DRDA supported datatype ((long) varchar for bit data)
    Regards,
    Ed

  • ERROR: Partition 4 extends beyond the end of the disk

    Hi,
    I'm trying to install Solaris 10 on my x86 laptop. Everyting is OK until the start of the installation and as I try to start the installation it prints an error message:
    ERROR: Partition 4 extends beyond the end of the disk
    Output of sfdisk -l /dev/hda command is as follows:
    Disk /dev/hda: 155061 cylinders, 16 heads, 63 sectors/track
    Units = cylinders of 516096 bytes, blocks of 1024 bytes, counting from 0
    Device Boot Start End #cyls #blocks Id System
    /dev/hda1 * 0+ 20798- 20799- 10482381 c W95 FAT32 (LBA)
    end: (c,h,s) expected (1023,15,63) found (1023,254,63)
    /dev/hda2 20798+ 20829 32- 15907+ be Solaris boot
    /dev/hda3 20830 53565 32736 16498944 bf Unknown
    /dev/hda4 53568 155060 101493 51152472 f W95 Ext'd (LBA)
    start: (c,h,s) expected (1023,15,63) found (1023,33,1)
    end: (c,h,s) expected (1023,15,63) found (1023,80,63)
    /dev/hda5 53568+ 138900 85333- 43007800+ 83 Linux
    /dev/hda6 138901+ 142869 3969- 2000344+ 82 Linux swap
    /dev/hda7 142870+ 155060 12191- 6144232+ 83 Linux
    I'm trying to install boot partition on /dev/hda2 and the Solaris on /dev/hda3.
    Is there any way to overcome this error without repartitioning the disk ?

    I agree that there is no obvious error from the data you've provided.
    What version of Solaris are you running
    uname -a
    Are you using a SCSI disk or a SATA drive?
    On Solaris it affect which driver we use.
    I've very curious what the geometry stored in the Solaris disk label is.
    Would it be possible for you to dump the fdisk partition table
    and the Solaris disk labels and vtoc and send them to me.
    dd if=/dev/dsk/c0d0p0 of=/tmp/mbr count=1
    dd if=/dev/dsk/c0d0p2 of=/tmp/pbr count=3
    [email protected]
    As a workaround:
    Since partition is 82 is a linux swap partition, it should be relatively easy to
    shrink that partition by a few cylinders and then run makeswap
    with no loss of information.

Maybe you are looking for

  • Deleted topics showing up as missing (with red X) in RH Explorer

    We have several topics in our RSC-controlled project that were deleted but refuse to disappear. Possibly the topics were deleted before RH crashed for some other reason. Now the topics are still listed in RoboHelp Explorer, with a red "X" on the icon

  • Java Script Errors on Siebel Sales and Call Center Login Pages

    Hello, This only happens with some users, but not all of them. When we first open the login screen in TRIAL we get several Internet Explorer errors. 1. Line: 1153 Char: 16 Error: Expected ')' Code: 0 URL: http://topaxsear009.iss.bnr.com/callcenter_en

  • Invalid Serial Number - CS6 Master Suite

    Anyone else having this issue? I believe Windows 8 updating to 8.1 may have something to do with it...

  • Genre field deleted after syncing

    Hi after syncing my ipod with my music library i discovered the genre field in itunes was blank. this has never happened before in all the years that i have been using itunes. i have several playlists which are based on this category. i have over 250

  • Flash installation disconnect

    When installing the flash player the installation goes immediately to 33% complete then sits there for a few seconds before disconnecting.  It says it is trying to reconnect but never can. I'm in Windows and Google Chrome I'm trying to install the fl