Error 4000 and other anomalies

Like many others I also have the dreaded 4000 error and can't burn discs. I also have another problem that is giving me great pain. On play back of any recorded or commercial CDs there is skipping or stuttering. This issue only presents itself in iTunes. I have used Windows Media Player, Blaze Audio Pro, Creative Media Source as players and they do not skip or stutter. I have updated all software/firmware and have gone as far as doing a non-destructive system restore with no success. The only time that these drives did not exhibit this issue was when I was using iTunes 4. someting or other. This issue presents itself on both drives.
I have (but iTunes CD diagnostics doesn't show it) a Sound Blaster X-fi Extreme Music sound card installed as well. I have taken the steps of disabling it and it's associated drivers/sofware and reinstalled the on board audio to see if it is the card or not.
I have spent the last week with HP support only to narrow the issue.
The issue is with iTunes
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
HP Pavilion 061 PX724AA-ABA M7170N
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.201), PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.4.3), pwd_2k (8.0.5.39),
Video Driver: NVIDIA GeForce 6600 GT\GeForce 6600 GT
IDE\DiskMaxtor6B250S0_________________________BANC1B10, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
USBSTOR\DiskST3160023A____________8.01, Bus Type USB
IDE\CdRomASUSDVD-E616P3H________________________1.04___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomHL-DT-STDVDRRW_GWA-4166B_______________1I24___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each
other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has
problems recognizing CDs or hanging or crashing while importing or burning CDs, check the
support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: HL-DT-ST DVDRRW GWA-4166B, Rev 1I24
Audio CD in drive.
Found 12 songs on CD, playing time 39:03 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 01:52:37
Track 3, start time 05:18:25
Track 4, start time 08:29:55
Track 5, start time 09:34:03
Track 6, start time 13:06:39
Track 7, start time 18:52:30
Track 8, start time 22:02:43
Track 9, start time 26:05:54
Track 10, start time 27:24:63
Track 11, start time 31:25:55
Track 12, start time 34:31:13
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 16 24 40.
The drive CDRW speeds are: 16.
The drive DVDR speeds are: 16.
The drive DVDRW speeds are: 16.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive E: HL-DT-ST
DVDRRW GWA-4166B on CDR media at speed 24X.
F: ASUS DVD-E616P3H, Rev 1.04
Audio CD in drive.
Found 12 songs on CD, playing time 39:03 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 01:52:37
Track 3, start time 05:18:25
Track 4, start time 08:29:55
Track 5, start time 09:34:03
Track 6, start time 13:06:39
Track 7, start time 18:52:30
Track 8, start time 22:02:43
Track 9, start time 26:05:54
Track 10, start time 27:24:63
Track 11, start time 31:25:55
Track 12, start time 34:31:13
Audio CD reading succeeded.
Get drive speed succeeded.
Please help.
HP m7170n Windows XP Pro

Well success may be at hand. I beleive I found a way to repair the skipping/stuttering in iTunes. If you suffer from this rare anomaly, go here: http://www.mp3.com/stories/1826.html&refid=38&ref_typeid=8
Now if only I could fix this rather frustrating error 4000 issue...
HP m7170n Windows XP Pro

Similar Messages

Error,13030 and others! unable to download, takes a long time to get to any page.

# Question
Error,13030 and others: Email -!Sending taking a little longer than usual...
We'll keep trying and let you know when it's been sent.
I am also unable to download (I use Send Space and Mega Upload), plus it takes a long time to get to any page, I have to Reload several times and sometimes it still does not work!
I'm using a PC, XP professional -
I was away for 9 days came home to my computer not responding. I am using the free version of AVG security and read the instructions in the Mozilla help Re: Firewalls, changing the AVG settings removing Mozilla and then adding it back in. However I checked for updates on AVG none were available and the instructions Mozilla has are for a version of AVG that I do not have. I am using 8.5 and I think the instructions were for 9.0. At any rate I am stuck, and desperately need to get this figured out! I hope that this is enough information for someone to point me in the right direction.? Your help is be greatly appreciated. Thank you in advance! Charisme

ldcorn wrote:
My computer also has been taking a long time to find a wireless network, up to several minutes. I often have to have it "scan" for networks several times before it finally picks it up. Is there a solution? This has been going on for many months. Other computers (PCs, iPhone) pick up the signals within a few seconds, but my Powerbook takes several minutes, even over 5 minutes sometimes.
See how many networks are listed in Sys Prefs: Network: Advance. Drag the preferred to the top. Delete any you don't really need.
Message was edited by: tjk

ITunes unknown error (-200) (and others)

Just switched from a iPod mini to an older 20 gig. Tried to sync it. iTunes crashed. Made me reformat the iPod. Lost all music on it. Also, no audio was playing. Told me to update iTunes. (thinking it would solve the sync issue) I did. iTunes wont open because of quote...
"an unknown error occurred (-200)."
So I tried updating quicktime. Didn't work. Now audio wont work for QT player either.
I have tried past versions of iTunes and they wont load either (same error).
So now I have 2 empty iPods, and a computer that will not play audio or let me load my iPod. (websounds and other apps still work so it isnt the speakers themselves).
Any help on any of these things would be great. And spell it out please I'm not too keen on the procedures here.

Also, I have not moved any files since updating. Still won't do anything.

Hello ! error 1015 and other problems

I'm user of iphone 3g (ios 4.2.1). My phone was jailbroken but after jailbreak, ituens ask for restore of system. So i made this restore, and my problems appears. I cant restore soft, when i trying to restore i have error 1015, i try to use ireb, lubusb and other stuff. And myh phone is still blocked. Plz help me

problem solved, i install a custom firmware 4.2.1. Problem appear because while i'm does jailbreak , i;ve install ipad baseband. if u install custom firmware this problem disappear

Xperia Z2 Lollipop Update PC Companion Error 11 and other Xperias problem in updating

Hi,
I'm trying to update my Xperia Z2 D6503 to 5.0 Lollipop throuh Sony PC Companion. However, when it finishes preparing it says "Unable to run update components on your computer" and "Unable to communicate with Sony Update Engine (error 11)."
I've tried disabling my firewall but that doesn't help either.
Some details that might be helpful:
- my Xperia Z2 D6503 was bought unlocked from a local Sony Store
- my computer is Windows 7 64-bit Home Premium
- I received the notification for the update (or saw it) around 4pm PST
Thanks for your time!

Can you help me?
I want update Xperia M2 aqua
I have windows 10
I did
but, again:
unable to communicate with sony update engine (error 11)
and, i did Disable the Antivirus and firewall
but, again:
unable to communicate with sony update engine (error 11)

SAP Crystal Reports 2011: Error INS00140 and other install errors

Hi all,
There have been many customers who have downloaded the Crystal Reports 2011 installation package and have run into an error when the installer attempts to recognize the keycode being used. The error received is "The Product Keycode is not valid INS00140."
This thread is meant to track all current resolutions that have been determined based on troubleshooting with customers thus far. In addition, the thread will provide you with the list of things that we need to know in order to properly troubleshoot the issue.
Before attempting any of the steps below, please be sure that you are using the latest version of Crystal Reports 2011 which is SP02. You can download this version from the SAP [website|http://www.sap.com/solutions/sap-crystal-solutions/query-reporting-analysis/sapcrystalreports/index.epx].
Coy
====================
Resolution Options
Windows XP & Microsoft Visual C++ Redistributable
If you are installing Crystal Reports 2011 on Windows XP, then you need to ensure that the following Microsoft patches are not installed on the machine. You can check this by using the Add / Remove Programs dialogue.
KB2467175
KB2467174
KB2467173
If any of these are installed, then please remove them before attempting to install Crystal Reports 2011.
Installing with Dashboard Design 2011 or Presentation Design 2011
If you are installing Crystal Reports 2011 on the same machine as Dashboard Design 2011 or Presentation Design 2011, then there may be a problem with the registry key that points to the location of the keydecoder DLL. To check this, launch run regedit and navigate to the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Shared Tools\keydecoder.dll
You want to make sure that the "path" key is pointing to the valid path for the keydecoder.dll. The correct path to the DLL should be: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x8keydecoder.dll.
Uppercase License Key
In addition to the above, you need to make sure that you are entering the license key in all uppercase characters. There is a current issue with the installer where it does not accept lower case characters.
Fix - Coming in SP02, but can implement manually for now
Locate the BCM-4-0.dll.2.Config file in the <install package directory>\dunit\product.crystalreports-4.0-core-32\actions
(replace crystalreports with crystalreportsjava for CR for Ent and xcelsius for dashboards)
Open BCM-4-0.dll.2.Config
Locate this line:
<bindingRedirect oldVersion="8.0.50727.0-8.0.50727.1434" newVersion="8.0.50727.4053" />
Modify the oldVersion number to make the line like this one:
<bindingRedirect oldVersion="8.0.50727.0-8.0.50727.4053" newVersion="8.0.50727.4053" />
This should allow you to install without issue.
Further Troubleshooting
If none of the above helps to resolve the issue, then we need the following:
The installation logs from the following folder: C:\Documents and Settings\<YOUR USER NAME>\Local Settings\Temp\<DATE OF YOUR LAST ATTEMPTED INSTALLATION>
The results from attempting to run the keycode validator directly. You can find it under the folders that contain the installation package. For example, C:\Documents and Settings\<YOUR USER NAME>\My Documents\CrystalReports2011\DATA_UNITS\CrystalReports\dunit\product.crystalreports-4.0-core 32\actions\isKeyCodeValid.exe -keycode <YOUR KEYCODE> -version 140 -property CR.EnableCR
You should submit a new forum post with relevant details about the error and provide links to download the logs generated by following the above steps.
Edited by: Don Williams on Dec 22, 2011 7:53 AM

Then try these:
1. Download the latest version of the installation package for Crystal Reports 2011. To verify the version of extracted package, open productid.txt file located at: {installation package}\DATA_UNITS\CrystalReports\.
Make sure it is not less than 14.0.2...
2. Where to download Crystal Reports 2011 installation from: - free trial from SAP Online shop http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx - from SDN Community page http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm - from Service Market Place http://service.sap.com/sbop-downloads Note: downloads from all above listed locations are fully functional product installations. Trial version defined by expiring key code, not by functionality limitations.
3. Copy the installation package to a hard drive if possible to avoid any networking issues.
4. Login to the machine as Local ADMINISTRATOR.
5. Temporary disable any kind of firewall, antivirus, network security etc., if possible.
6. On the latest versions of Windows, even if logged in as local Administrator, right-click the setup.exe and select "Run as Administrator". If do not have Administrator account, right click "Run as" Select current user and uncheck the "Protect my computer and data from unauthorized program activity".
7. Make sure there is enough space on the computer. If not sure about the space, run "Custom" installation with minimum components. Non-mandatory components could be added at any time.
8. Finally, if there is an existing "InstallData" folder under C:\Program Files (x86)\SAP BusinessObjects rename it to "InstallDataOLD"
Edited by: Don Williams on Dec 22, 2011 7:51 AM

Error DW050 and others on installation of old PS6

What can I do when I get this error message after installing (3 times) PS6 from Creative Suite 6 Design & Web Premium:
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Recommended" (Seq 22)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 22)
----------- Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Recommended" (Seq 12)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 12)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - AdobeColorCommonSetCMYK CS6: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB CS6: Install failed

Paulevy their are either corrupted color profiles on your computer or your current User account's file permissions have been compromised. I would recommend reviewing your installation log files to determine the exact details. You can find details on how to locate and interpret the installation log files at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.
Once you have determined the exact location please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust the file permissions. If the error continues you may want to rename the affected folder.

System/Application startup causes error -2147220712 (and others)

I have a developed a .NET logging application (in C#) using DAQmx and an NI USB-6210 board all running under XP Pro. All works fine when the application is launched after the host PC system has been running for some time.
I have now put a shortcut to the application in the Startup folder so that it is launched as part of the system boot (The system is set to run the account containing the Startup folder immediately on boot). I now get the following error message.
NationalInstruments.DAQmx.DaqException: (Hex 0x80040318) Internal error: The client has failed to connect to the configuration server, possibly because the server is too busy or has run into a communication error. Please note the steps you performed that led to this error and contact technical support.
Status Code: -2147220712
   at nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >.CheckWithName(StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >* , tCaseInsensitiveBasicString<unsigned short\,_STL::char_traits<unsigned short>\,_STL::allocator<unsigned short>\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName)
   at NationalInstruments.DAQmx.DaqSystem.get_Devices()
i.e. it fails at the first DAQ call in the application at the statement
                 string[] devices = Daqsystem.Local.Devices;
that I'm using to determine if the hardware device I want to use exists on the system.
My guess is what is happening is that my application is starting before the NI configuration server and the other underpinnings of the DAQmx interface have completed their startup activity.
I also have to insert waits of several seconds AFTER this call succeeds , i.e after the device I want appears in the return string from the call before I can execute calls like
                myTask.AddGlobalChannel(cD.globalChannelName);
to prevent 'resource not available' type errors from this call. Even after the device name is returned there are clearly other startup activites going on.
I suppose I could catch each DAQmx call exception, wait and retry until I get success all the way though this configuration stage of my application, or put a big 'worst case' delay in at the start to allow the NI code to do what it has to do, but that's a kludge at best.
Is there any other coding mechanism or call that I can use from my application that indicates that DAQmx and all its underpinning NI code is up and running and ready for use?
Regards,
Malcolm Sharp

I am having a similar issue, however, waiting for 15 mintues before starting the program with a try/catch loop does not solve the problem. I am using four computers to test the issue with windows 7: a laptop running x64, laptop running x86, desktop running x64, desktop running x86. All computers are executing the exact same build of the application, and all have the most current version of Daqmx installed. Both of the desktops don't have the issue, but both of the laptops cannot find connected devices (I am only using a USB-6008), and the following exceptions are being thrown:
------------------------------------------------------------------------------Exception 1
Exception Message:     Internal Software Error occurred in MIG software. Please contact National Instruments Support.
Task Name: _unnamedTask<0>
Status Code: -229771
Exception Source:      NationalInstruments.DAQmx
Exception Stack Trace:    at nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >.CheckWithName(StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >* , tCaseInsensitiveBasicString<unsigned short\,_STL::char_traits<unsigned short>\,_STL::allocator<unsigned short>\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName)
   at NationalInstruments.DAQmx.Task..ctor()
Exception Target Site: Void nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >.CheckWithName(nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >*, nNIDMXS100.tCaseInsensitiveBasicString<unsigned short\,_STL::char_traits<unsigned short>\,_STL::allocator<unsigned short>\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>*)
------------------------------------------------------------------------------Exception 2
Exception Message:     MAX: (Hex 0x80040318) Internal error: The client has failed to connect to the configuration server, possibly because the server is too busy or has run into a communication error. Please note the steps you performed that led to this error and contact technical support.
Status Code: -2147220712
Exception Source:      NationalInstruments.DAQmx
Exception Stack Trace:    at nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >.CheckWithName(StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >* , tCaseInsensitiveBasicString<unsigned short\,_STL::char_traits<unsigned short>\,_STL::allocator<unsigned short>\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName)
Exception Target Site: Void nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >.CheckWithName(nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >*, nNIDMXS100.tCaseInsensitiveBasicString<unsigned short\,_STL::char_traits<unsigned short>\,_STL::allocator<unsigned short>\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>*)
Also, I have noticed that both National Instruments software, as well as the application I am building require internet access permission by my firewall in order to find the devices. I have tried both enabling access for all National Instruments software and my application, as well as disabling the firewall altogether, both to no avail. On top of the present exception issue, is there any way to prevent the daqmx driver from requiring internet access by a firewall in case a user disables access and cannot figure out the cause of the problem?
Thank you,
Matt

Error U44M1P7, and others

Dreamweaver CC and Audition CC gave me this error code, U44M1P7. Others said close the AdobeCrashDaemon, which I did. Others actually worked! Any tips and suggestions are appreciated,
Clay

Hi claygoldstein,
Please try the steps mentioned in the below mentioned link.
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Thanks
Kapil Rupani

Error - 50 and other really frustrating issues, none resolved so far on online community

Hi all,
I'm on the verge of giving up on Apple Itunes and the Store altogether. Since the second last iTunes update came out I've had continuing issues with downloads that get interrupted with a range of error messages coming up, the most recent and by far most common being Error -50. These days it's a 50/50 gamble whether iTunes actually opens or not. When it is open and I download something from the Store, chances are the following will happen:
*The download will be intterupted and iTunes closes, not to be opened again until the computer has been restarted a couple of times.
*The sound and moving image will abruptly get out of sink
*The sound will stall then disappear altogether, following by iTunes stopping to work completely
*I've also had it that a downloaded rental will abruptly stop and when I restart the whole rental is gone and forefeited.
This is really frustrating and I've already begun to buy most of my online content elsewhere.
Customer Support are all very nice people, but they've politely said to me, we can help you to a point -- from hear on in you have to pay for support! Pay for it?! When there stuff isn't working. I haven't changed anything about my computer until those new updates came along and ruined a perfect relationship!
Nevertheless, for those of you that think you can help me, I have done the following:
*Checked computer date and time
*Running Apple as administrator (though I've never had to, and it doesn't seem to fix anything anyway!)
*Checked that iTunes is allowed by my firewall and anti-virus software AVG.
*Re-installed iTunes
Any (conclusive!) help would be massively appreciated!
Richard

My home is 2880sqft and a two story, I have the router in the game room upstairs (moved from the office to a more central location recently). However, my signal strength on my devices is 100% but my connection speeds when connected to wireless just always drop or are sometimes non existent and I have to disconnect my device from wireless and re-connect. It is as if I'm connected to the router but I'm just not getting internet connectivity. I can be sitting right next to the router and this happens. This only happens with wireless I always have a steady connection when connected with ethernet.
If I change to different SSIDs won't that disable the devices being able to see each other on the same network? Mainly need to be able to stream content to my devices.
I will try this solution, but if this doesn't work should I be looking at upgrading to a newer model (hate that I spent so much on this one) or look elsewhere for my wireless router solutions.
Regards,
T

IPod will not update properly - error -69 and others

I have been working to get my daughter's Ipod working properly and it seems to be just getting worse. Problems seem to come from downloaded (from ITunes) music that won't upload properly. I've done all kinds of things to see if I can get it to work, but every time we go through the update process, I get error messages such as the "unknown error -69". I have tried to uninstall and reinstall the original software for both Itunes and Ipod and also obtained upgrades for both programs. I've completely restored the Ipod thinking that would help but to no avail. I'm about ready to toss the thing in the gargage. What are my options?

Please help me, I would really really appreciate a suggestion from all you iPod experts out there!

[SOLVED] Grub Error 17 and other not so fun stuff

Booted today and greeted by grub error 17.
I booted from Arch Live CD
fdisk -l
looks ok
fdisk /dev/sdb
x,f,w nothing done, proper order
ok, let's chroot my install and install grub
mount /dev/sdb1 /mnt
unknown filesystem type, doh
mount -t ext4 /dev/sdb1 /mnt
nope
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
(aren't you trying to mount an extended partition,
instead of some logical partition inside?)
In some cases useful info is found in syslog - try
dmesg | tail
dmesg | tail
attempt to access beyond end of device
sdb1: rw=0, want=4, limit=2
EXT4-fs: unable to read superblock
attempt to access beyond end of device
sdb1: rw=0, want=4, limit=2
EXT4-fs: unable to read superblock
time to fsck ?
Last edited by bloodniece (2009-10-04 15:11:12)

bloodniece wrote:
I fixed it thanks to testdisk.
When I initially set this install of Arch up I used a whole disk in 2 partitions: / and swap. A grub error 17 led me to believe the partition table was fuxored. Fdisk did not fix the partition table but it was reporting the root partition as extended, which would not boot and is NOT how I set the system up. If had been up for about 10 months and working fine. I was able to use testdisk in a livecd session to both backup my home and etc directories and fix the partition table.
I'm marking this issue fixed. But I'm still confused as to what the hell happened. Unclean shutdown?
I'm getting contantly ERROR 17...
I dunno how to fix, I simply reboot some times and it desapears..
If someone could give me a clue..
Thx guyz!

Audio Core Overload ( Error -10011) and others.....

Hello,
I was just wondering if anybody had a solution for the Audio Core Overload and the Disk too slow problem. I run a Dual 1.8 with 1 GB of RAM and Logic 7.1 ( recently upgraded form 7.01), Kontakt, DFH. I use the Moto 828 Firwire interface. I never had any problems before I upgraded. Only sometimes an audio overload, which actually never affected the performance. I never had / have any similar issues when I run DP 4.12
Anyways, any help or suggestions would be greatly appreciated.
Thanks

The error also always occurs if the Mac is left unattended for few minutes (i.e. hard drives go inactive) then Logic is set to play again
well this is easy fixed. turn off spin down hard drive in power saver in system prefs. i have left mine on and expect to wake logic up by stopping and starting it. no big deal.
I believe Apple needs to address this immediately but they won't even respond to my email unless I buy a service contract!
and they won't respond because; a) they are an incredibly secretive organization, and b) because so often people are complaining about flaws in their programming when the answer lies with the user. your point here is a good example of that.
which ISN'T to say that they DON'T have issues to address. i just make it my business to be very cautious about what exactly they so that the primary content of this forum points them out. ranting or incorrect or unfair blame of apple and LP is only going to annoy the very talented and no doubt hard working people who have developed the programme. how would you feel if your work was being unfairly judged? quite a bit different than how you would feel if it was being fairly judged, i'll bet.
so the issue that tBird has missed, is an issue that has been confirmed by many many users is the one where there seems to be an overload, even when there is fairly light use of audio and plug-ins, and where the system performance indicators suggest that one processor is overloading and the other is not being used at all.
the problem is that while LP is idle, one of the plug-ins is taking up CPU cycles, but LP doesn't realize this. so on playback it adds the same processing onto the CPU (a kind of feeback problem i guess) and it ends up peaking before the processing planned for the other CPU is taken up.
the solution, or workaround, is to open your audio configuration and option-click (bypass) through the plug-ins one by one until the CPU meter (which even though logic is idle will probably be hovering around the 1/4 to 1/3 mark) drops down significantly.
once you have the right plug-in clicked, LP will run normally. then remove the plug-in and reinstate it in a different plug-in slot, or on a different instrument if it is one of the instrument plug-ins. the main culprit for this problem is space designer.
the instrument drop-outs are also a common problem. and i do agree apple need to addrress this problem urgently. considering the improvement LP 7.1 was from 7.0.1, i would eat my interface if they don't have a fix planned. roll on 7.2.

Error -9813 and others

Hello,
I've an error code -9813 each time I try to conect to the iTunes store.
Might this be related to synchronisation pb with iSync and with troubleshooting with iDisk ?
Does anybody have any clue for me ???
Cheers,
Bertrand

re posted later...

Macbook 2009 Not working properly [Error -50 and other several issues]

Hello there!
I am having several issues with my Macbook, they all showed unexpectedly. Most applications would not work, such as Disk Utility or Pages. Safari couldn't load any webpage, just after a long time it was able to display them. Also, I was having some kind of error -50 when trying to move or delete any file, and iTunes was showing the following message; "iTunes can't verify the identity of the server "ax.itunes.apple.com". The certificate for this server is invalid. You might be connecting to a server that is pretending to be "ax.itunes.apple.com". I couldn't turn off the computer either, when I tried to doing so it wouldn't do anything, I had to press the power button to turn it off. After that, I turned the computer on, everything showed up as normal but after a few seconds later the computer suddenly turned off, I tried again but I got the same result. Afterwards, I tried in recovery mode, and weirdly, it didn't show any problem. I ran disk utility and verified the hard drive but it says it's working perfectly. The SMART status also says the hard drive is fine.
What could this mean? All these problems appeard suddenly, I've never had any of those issues before.
I have a late 2009 Macbook with Mavericks Installed,
4GB of RAM,
A 320GB Seagate Hard drive,
And a 250MB Graphics Card.
Thanks for your help!

Hello there!
Thanks for your reply! I have no anti-virus software installed, but I have (rather said, had) CleanMyMac though. I installed the demo version and ran it only once. I was curious about it, I had no idea it could make as much damage as MacKeeper.
Also, I scaned again my internal Hard Drive with Disk Utility using the OS X Installation DVD, and according to the report, the partition where the operative system is located is corrupted. Disk Utility tried to repair it but failed, and the most reliable option was to reformat the disk. I proceeded to reformatting it but unfortunately the process was not succesful - I got an error that reads; "POSIX reports: The operation couldn’t be completed. Cannot allocate memory". I tried to reformat the disk using the terminal, but I was only able to erase it, not to format it. I did a research and I found out the problem might be the SATA cable, (https://discussions.apple.com/thread/3507546).
Could that explain also the weird behaviour when I was using the computer? I guess my best bet now is to get a new SATA cable.

Error 4000 and other anomalies

Similar Messages

Maybe you are looking for