Error 403, error 403

Não consigo acessar meu icloud, aparece error 403. Digito meu id e senha e nada. Podem me ajudar?

Ola!
Desligar / ligar o iCal no iCloud
B.

Similar Messages

403 Error Message on a website?

Hello,
I tried to access a website, and I received a 403 Error Message.
It said:
"Error 403
We're sorry, but we could not fulfill your request for / on this server.
You do not have permission to access this server. Before trying again, run anti-virus and anti-spyware software and remove any viruses and spyware from your computer."
It gives me the option to fix it myself, and then that link took me to this message:
"Your request was intercepted by Bad Behavior, security software which protects the Web site you visited from malicious activity, such as hackers, spam and viruses. We apologize for the inconvenience, but your request matched a profile of suspicious activity. This problem is usually quite easy to fix.
Your computer's IP address was determined to have recently sent spam or engaged in malicious activity as reported by the Project Honey Pot monitoring service. This means your computer is most likely infected with viruses or other malicious software. See below for more information.
This problem may be caused by viruses or spyware on your computer, or by malicious software that pretends to be anti-virus or anti-spyware software. Ensure that you have REAL anti-virus and anti-spyware software on your computer, that they are kept up-to-date, and that you have run a full system scan using each tool. Once your system is cleaned of viruses and spyware, please try your request again.
The free Microsoft Security Essentials provides reasonable protection against a wide variety of malicious software.
If the above suggestions fail to resolve the problem, click Back and contact the e-mail address you were given for further assistance."
Then the contact email address was invalid!
The website is a valid teen site, nothing shady, and I haven't participated in any malicious activity that I know of!
Please help, I'm running Tiger 10.4.11 on a Macbook, using Firefox.
Thanks,
Jen

Hi BCJennyP, and a warm welcome to the forums!
Hard to tell if it's real or not, there is a Project Honey Pot Services...
http://www.projecthoneypot.org/services_overview.php
http://www.projecthoneypot.org/faq.php
We know you don't have a virus, but could be some spammer faking your IP.
To see if it's you or your provider, What's my ip...
http://www.whatismyipaddress.com/
Start with these three, check SpamCop or SpamHaus to see if your IP is there...
http://spamcop.net/bl.shtml
http://www.spamhaus.org/lookup.lasso
http://www.spamhaus.org/zen/
Sometimes an ISP will bloc a whole other ISP too, if it's the source of too much SPAM.
Might also see this post by Gallomimia...
http://discussions.apple.com/message.jspa?messageID=9465359#9465359
Klaus1 on viruses...
http://discussions.apple.com/thread.jspa?messageID=10582058#10582058
See if you might have this malware redirecting DNS queries...
http://macmegasite.com/node/3924
http://www.ehow.com/how2128387remove-osxrspluga-trojan-horse-mac.html
How to fix...
http://www.macosxhints.com/article.php?story=20071031114140862
Get MacScan...
http://www.apple.com/downloads/macosx/networking_security/macscan.html
Also, beware of MacSweeper, malware itself!
Nasty Nasty ! 1023.dmg...
http://x704.net/bbs/viewtopic.php?f=12&t=2178
MacSweeper, malware...
http://en.wikipedia.org/wiki/MacSweeper
If none of those are it, then report back please.

While Creating Web service call from JDeveloper getting http 403 error

1. I have created the new application as Oracle Fusion (ADF) application
2. I have included the web service technology to the application
3. I am trying to create new web service data control layer , after specifying URL we are getting the following error
WSDL:Exception:fault code:=OTHER_ERROR failed read from WSDL from http://10.141.28.242:1030/oraclediagent/OdiInvoke?wsdl
HTTP connection error code is 403.
could anyone please try to solve this
thanks
887401

HTTP 403 means you don't have permission to access that URL. Have you supplied credentials?

403 Error running ADF application in JCS

I am getting a 403 error while running a ADF application in JCS. I defined a security role and mapped it to a custom role. web.xml and weblogic.xml are pasted below
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
         version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<context-param>
    <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
    <param-value>client</param-value>
</context-param>
<context-param>
    <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
    <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
    <param-value>false</param-value>
</context-param>
<context-param>
    <description>Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information.</description>
    <param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
    <param-value>true</param-value>
</context-param>
<filter>
    <filter-name>trinidad</filter-name>
    <filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter>
    <filter-name>ServletADFFilter</filter-name>
    <filter-class>oracle.adf.share.http.ServletADFFilter</filter-class>
</filter>
<filter-mapping>
    <filter-name>trinidad</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<filter-mapping>
    <filter-name>ServletADFFilter</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
</servlet>
<servlet>
    <servlet-name>resources</servlet-name>
    <servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.GraphServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.gauge.GaugeServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>MapProxyServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.geoMap.servlet.MapProxyServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>GatewayServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.FlashBridgeServlet</servlet-class>
</servlet>
<servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/afr/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <url-pattern>/servlet/GraphServlet/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <url-pattern>/servlet/GaugeServlet/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>MapProxyServlet</servlet-name>
    <url-pattern>/mapproxy/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/bi/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>GatewayServlet</servlet-name>
    <url-pattern>/flashbridge/*</url-pattern>
</servlet-mapping>
<mime-mapping>
    <extension>swf</extension>
    <mime-type>application/x-shockwave-flash</mime-type>
</mime-mapping>
<security-constraint>
    <web-resource-collection>
      <web-resource-name>constraint1</web-resource-name>
      <url-pattern>*</url-pattern>
    </web-resource-collection>
</security-constraint>
<login-config>
    <auth-method>CLIENT-CERT</auth-method>
    <realm-name>default</realm-name>
</login-config>
<security-role>
    <description>javauser</description>
    <role-name>javauser</role-name>
</security-role>
</web-app>
<weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                  xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-web-app http://www.bea.com/ns/weblogic/weblogic-web-app/1.0/weblogic-web-app.xsd"
                  xmlns="http://www.bea.com/ns/weblogic/weblogic-web-app">
<security-role-assignment>
    <role-name>javauser</role-name>
    <principal-name>manager</principal-name>
</security-role-assignment>
<session-descriptor>
    <cookie-path>cloudTest1</cookie-path>
</session-descriptor>
<context-root>/cloudTest1</context-root>
</weblogic-web-app>

Does it work without security ? Does it work with "BASIC" authentication ? Which browser are you using, there have been authorization issues with CLIENT-CERT on IE. Try FF and clear your cookies / cache before accessing.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

403 error when trying to access a previously uploaded document in App

I have 2 machines on one I am running WLS 10.3 with an admin server and a managed server called "dev" on a live box.
On the other, my dev environment I upgraded from 8.1 to 10.3 so it upgraded my server to have the admin server all in one i.e. deploy apps to that server too.
I have an app with a few entries that the deployment descriptor ( ejb-jar.xml) refers to a directory within the app, the directory is a location where files get uploaded to. It reads something like thisL
./app_name/web/uploads/document/
THe documents get uploaded to the correct location on both machines, but on the machine that has the managed server and admin server I cant actually view the documents - whih are viewed through a jsp....there is a Session Bean that creates a link to the document based on an id within the database(and not the actual filename itself), for retrieving the document, which is populated in a jsp. However in the Bean the directory is set like this:
String docUploadDir = "/upload/document/"
so the link gets generated like this:
www.mydomain.com/upload/document/?text=12345
This works on the upgraded WLS version where the domain got upgraded from 8.1 to 10.3, where the admin server bundled up as the apps server as well. However under the WLS 10.3 domain i created(which base location and domain names are the same as 8.1 version) I get a Forbidden 403 error when I try and view the documents.
Im assuming the forbidden comes about because I am trying to access a location on the machine that I shouldn't be allowed to. However where is the relative "docUploadDir" actually suppossed to exist?
Thanks in advance!
Paul

Questions:
- Did you set up a protected web realm?
- When you click on the link to the realm, you get the block message?
It's a little unclear what you've done to configure the web server and what you did to get the message.

SAS Token failed with 403 error while generating for each request using ARR module

Hi,
We are doing an e-Learning application, which plays a course on the browser (inside a div control). The course contains list of static contents such as html, js, css etc., and media files .mp4. We are hosting the static contents (.html, .js, .css etc) into
Azure blob storage and media files into Media Service and CDN.
When user triggers to take a course, the browser first request the Web Role with landing page (Ex: FirstPage.html) and with Course Unique Id - Ex:
https://cloudservice1.cloudapp.net/course/courseid/firstpage.html. We have written a custom ARR Module (http://www.iis.net/learn/extensions/url-rewrite-module/developing-a-custom-rewrite-provider-for-url-rewrite-module),
which receives the request, parse it and generate blob storage url with SAS token using C# code for each file. Then route to blob storage. (we have already passing storage account details to ARR Module using Web.config)
For single user, the course plays fine. But we do the load testing with > 400 user load (with 5 instances), we are getting many 403 errors (and not all files). If the load is less than 200, we don’t get such issue.
Also, we are using REST code to generate the SAS token. When the SAS token expiration time extending more than 60 min, getting error “Access without signed identifier cannot have time window more than 1 hour”. As the code is exist in ARR Module, unable to
refer the Storage Client assembly. This 60 min time interval is for each file request – so there could not be an issue on expiration, but feeling this might be an issue?
Can you please point me what could be the issue and how to solve this. Is the ARR Module caching the SAS token and providing the same even after the expiration time?
Many Thanks, Thirumalai M

hi,
There is a similar thread (http://stackoverflow.com/a/17572316 ), I recommend you could refer to it.
And I'd like to know how to set the expiry time in your code, and you could see this page (http://azure.microsoft.com/en-us/documentation/articles/storage-dotnet-shared-access-signature-part-1/
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Http 403 error message when connecting to WRT120n router

I recently upgraded to the WRT120n router at home. I quickly connected my desktop computer, my wife's Mac and two Lenovos, but my son's HP Pavilion cannot access the Internet. It returns the http 403 error message. Windows (Vista) and Network Magic tell me the laptop is connected to the router and the Internet, but the browser does not work. Have tried IE, Chrome and Firefox - same result. Have also tried to connect with cable. Hooking up wirelessly with WPA, was no problem, but the browser is unable to access the Internet.
Grateful for any help.

What is the ip address you are getting on the Vista Computer..?
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Wireless Network Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Wireless Network Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

Cannot log in to either Disqus or Livefyre since upgrade to 8.1. get 403 error when trying to contact Disqus support.

I cannot log into either Disqus or (it seems) Livefyre. When I attempted to submit a report to Disqus, I get a 403 error code. In Livefyre, when I make comments, they appear on my screen, but apparently not on anyone elses (repeated requests for a ping back from other commenters have gone unnoticed). Oh, version 18.0.1 I am set to receive cookies, and adblocker plus as well as ghostery are set to not block either. This problem started immediately after the v.18.0.1 upgrade was installed.

No, Firefox doesn't touch website accounts, so you don't need to re-register.

403 error when starting in windows 7 sp 1 O.S.

I am using Firefox 5.0 in Windows 7 Ultimate O.S. Recently Adobe Flash and SP 1 upgrades appear to have corrupted the URL of the default startup search on Yahoo to produce 403 "unauthorized" errors. I cannot use existing Firefox bookmarks or change the bad URL. My I.E. browser appears to be O.K. I tried Wisefixer software repair program but the problem still persists. Are there any articles on Firefox 5.0 running in Windows 7, SP 1? or, How to fix 403 errors? Problems? Known issues?

Hi Vidyadhar!
First of all: Thanks for your suggestions
I have done what you mentioned several times now, also a hard reset of the device.
I have made the observation that after installing the mentioned files and not starting the MI yet, there are the following files in the inbox-folder:
create.dir
8 xml-files
sap.comtcmobilewdlitecontainer~implementation.sda
Then I have tried to start the MI client, but same error as described. In the inbox-folder, only the create.dir and the *.sda-file are listed there. Is it possible that there is an error in the *.sda-file?
Best regards,
Christoph

Gett 403 error code when trying to access UCM 11g from Admin console -- deployment

We have deployed UCM 11g in cluster mode. When I test the application via the admin conssole --> deployment --> UCM. I can access UCM only on one member of the cluster. The other member gives me a 403 error code..

Please, take a look at https://blogs.oracle.com/proactivesupportWCC/entry/clustering_and_high_availability_for (and contact the support group as advised)

Htmlloader 403 errors

I have an air app which displays my site through htmlloader. The app loads up the login page of my site, and allows users to login through the app. The problem is recently, every time I try to log in, it gives my a 403 error. I've completely deleted and reuploaded my site, and even made a test site, but both come up with the same issue, It doesn't even show the login page or the admin page, just a blank 403 error page. I've noticed that when I mess with the htmlloader (ie. remove the useragent and cookies) the page wont even load at all, and just shows a blank white screen inside the app. Can anyone help me, or even tell me maybe a better or more effeciant way of doing this?

What he meant is as follows.
1. You do not authenticate user using wordpress authentication. You can authenticaticate using some mechanism which the AIR application can do.
2. Once you authenticate you can access the website using the AIR application.
Word press provides a way to external authentication. Not sure it is still supported.
http://wordpress.org/plugins/soap-authentication/
Hope this helps. I have not implemented this so I am not sure.

Seeburger AS2 Sender Adapter : http: 403 error

Hi All,
We have a scenario where the external party is sending xml message to xi.
While sending they are getting the below error.
u2022 Error(Error(com.cyclonecommerce.tradingengine.transport.TransportException: Retryable response: 403 Forbidden), ExchangePointId(Id(147995587),
Has anyone encountered this error before?
Any idea what might be the problem?
Regards,
Aarthi

Hi,
This error may have different reasons:
1) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
2) A valid sender agreement is missing.
3) There are more then one AS2 sender agreements with the same sender AND receiver party.
4) The corresponding inbound channel is set to inactive.
Regards,
Prakasu.M

HTTP 403 ERROR IN SXMB_MONI

Hello Experts,
My interface is JDBC to ABAP PROXY in DEV it is workin fine in QUAL in SXMB_MONI it is throwing HTTP Error
Error while sending by HTTP (error code: 403 ,error text: Forbidden) (See attachment HTMLError for details) .
if i open the message red colour flag is on CALL ADOPTER.
Please through some light on the issue.
Regards
Praveen

Hi,
you can refer http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a?QuickLink=index&overridelayout=true
I hope this will solve your problem.
Thanks,
Chandra

HTTP 403 Error in AS2 Connection

Hi,
Would really appreciate some inputs on this one. Just to give a background, we're tying to establish an AS2 connection between us and a 3rd party. The 3rd party tried to send a test message using our connecton details, but they got an HTTP 403 Error - Forbidden when trying to send a message.
I have confirmed the following:
- All the certificates (AS2 certificate, SSL, etc) needed for this has been uploaded in the 3rd party's system.
- The firewall has be opened for the 3rd party's sending IP address.
- We have also uploaded the 3rd party's certificates to our system.
- I checked the destination url of the message, and it seems that it is up as well.
As I am not very familiar and new to AS2, I'm currently stuck and running out of possible options.
Is anyone familiar with this? And, a possible cause and solution?
Thanks a lot!

Hi Ivan,
Actually, we have verified our AS2 ID that is set up in the 3rd party already, and it should already be the expected one. Although, I think I will need to ask them the full details already.
I also tried the tool you gave (was helpful btw), and it seems that I was able to send a message successfully to the 3rd party. This was the log:
OUTGOING TRANSMISSION TO ... Originator: ... Recipient: ... Signature: on Encryption: on Compression: off MDN Requested: Asynchronous: http://localhost:8080/AsyncMDN.aspx MDN Signature: on Transmission was successful. -TIMESTAMP Tue, 14 Jul 2009 13:03:20 +08:00 [1247547800343]- Verification of receipt is pending an asynchronous MDN.
The problem is as this software is on my localhost. I'm not sure if it is practical to have the 3rd party test and send to this other connection for this dummy server as this won't be used anyway in the planned implementation.
So I guess the conclusion that I got from this is so far, the configuration that I currently did on the actual connection is supposedly to be correct, and that the problem is on the 3rs party's side? Is that right?

Subversion browser 403 error

I installed Subversion using the Apache server. Everything works fine, meaning I can import, checkout and commit using my account. However, what I am not capable of browsing the repositories using a standard browser. However, all permissions should allow this (in an previous Arch installment, I was capable of doing so, but I don't have the information of compare against).
I use SSL, the data for the virtual host directive:
<Location /svn>
DAV svn
SVNParentPath /srv/svn/repositories
AuthzSVNAccessFile /srv/svn/.svn-policy-file
AuthName "SVN Repositories"
AuthType Basic
AuthUserFile /srv/svn/.svn-auth-file
Satisfy Any
Require valid-user
</Location>
The policy file:
* = r
[test:/]
avdmeers = rw
[cg-i:/]
avdmeers = rw
[cg-ii:/]
avdmeers = rw
Permissions for svn: root:root 755
Permissions for svn/repositories: root:root 755
Permissions for all repos: http:http 755
The actual error thrown after being polled to confirm the security exception and giving up my account details in the browser is a 403 error, meaning the server fails to read. What am I missing?

Apparently a bug present in 1.6 to be fixed in 1.7: weird permissions issue
Browsing specific SVN projects works.

I keep getting a forbidden 403 error code

I am unable to sign into the e-print website to register my printer. I keep getting a "forbidde 403 error code".

Hi nottsgirl;
Hope you are doing well and welcome to the HP Forum.
Sorry to learn that you are having this issue.
I want to start by saying that this is what I heard from other members of the forum.
I heard here (other members of the community) that there is an issue that engineers are working on diligently that may be affecting this particular process. At the same time I know that other members have some success using this steps that I am, about to tell you.
Let's do this 1st
- Reboot the computer.
- Open the browser (Internet Explorer, chrome, FireFox, Safari,Opera ) of your preference and clear cookies and internet (Browsing) history. In the browser of your preference try singing-in or registering to e-print.
If the above did not solved your issue, Please try this;
- Use another browser (Internet Explorer, Chrome, firefox, safari, Opera).
Hope this helps let me know if I can assist you any further;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Error 403, error 403

Similar Messages

Maybe you are looking for