Error 403 - Forbidden (BEA 8.1)

I am trying to integrate a existing web application into BEA 8.1. In Workshop
I created an "empty" application using the portal server. In my application I
imported a project which was my existing web application. The application built
just fine and the server started with no problems. When I went to bring it up
in the browser however, I got the following error:
Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization
will not help and the request SHOULD NOT be repeated. If the request method was
not HEAD and the server wishes to make public why the request has not been fulfilled,
it SHOULD describe the reason for the refusal in the entity. This status code
is commonly used when the server does not wish to reveal exactly why the request
has been refused, or when no other response is applicable.
Not sure why this is happening and nothing comes out in the log file.
Thoughts??
Thanks - Peter

The first thing that I would think is that you are only using a partial URL
to access the app, that is not including the entire path to the resource.
One thing you can do is to look at the app under the deployments folder in
the admin console. Select the web application and open the testing tab.
That will show the complete URL you should be using when hitting the web
app.
Hold this helps you
~Ryan Upton
"Peter Len" <[email protected]> wrote in message
news:4023adfd$[email protected]..
>
I am trying to integrate a existing web application into BEA 8.1. InWorkshop
I created an "empty" application using the portal server. In myapplication I
imported a project which was my existing web application. The applicationbuilt
just fine and the server started with no problems. When I went to bringit up
in the browser however, I got the following error:
Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it.Authorization
will not help and the request SHOULD NOT be repeated. If the requestmethod was
not HEAD and the server wishes to make public why the request has not beenfulfilled,
it SHOULD describe the reason for the refusal in the entity. This statuscode
is commonly used when the server does not wish to reveal exactly why therequest
has been refused, or when no other response is applicable.
Not sure why this is happening and nothing comes out in the log file.
Thoughts??
Thanks - Peter

Similar Messages

Error 403-forbidden from IE5 while authenticating a user through NT Realm

Hi,
Before posting this request, I checked the forum until Sep.18 to see if nobody
else experienced my problem, but in vain.
I am using WLS6.1Sp1 under NT4
I would like that NT users for defined NT Primary Domain Controller authenticate
themselves before accessing a web app. For that, I followed thoroughly the BEA
Doc to get the config.xml, web.xml, weblogic.xml and filerealm.properties correctly
configured.
The <auth-method> is set to FORM. The <security-role> and <security-role-assignment>
are also set with business roles and principals from the NT PDC. the <security-constraint>
with all the sub-tags are also defined. etc.etc. When I use the WL console, to
check users and groups lists, it works fine although it takes a lot of time before
being displayed (15 to 20 minutes !!!).
Through a Login.jsp, the user enters his/her login name and password. The result
is that I get the following message :
"Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization
will not help and the request SHOULD NOT be repeated. If the request method was
not HEAD and the server wishes to make public why the request has not been fulfilled,
it SHOULD describe the reason for the refusal in the entity. This status code
is commonly used when the server does not wish to reveal exactly why the request
has been refused, or when no other response is applicable."
No trace in the log files. No warning . Nothing.
My questions are:
1- Has somebody already experienced this?
2- Could you then help me ?
By advance , thank you very much.
Athmani H.
Note : I can provide you through email the config.xml, web.xml, weblogic.xml and
filerealm.properties and the concerned .jsp files on demand

Hi Jerry,
Many thanks for your interest and your help.
weblogic.properties file for WLS 6.1 SP1? There is none... I do have a filerealm.properties. I didn't state that I was using a weblogic.properties
file.
I checked the URL you proposed. I changed the <Auth-method> from FORM into BASIC.
A pop-up window is displayed requesting the user to enter username and password.
The result is that I get a web page displaying an Error 404 --not found.
Here is the complete error message :"Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given
of whether the condition is temporary or permanent.If the server does not wish
to make this information available to the client, the status code 403 (Forbidden)
can be used instead. The 410 (Gone) status code SHOULD be used if the server knows,
through some internally configurable mechanism, that an old resource is permanently
unavailable and has no forwarding address."
The message is displayed when the browser tries to resolve the following URL :http://localhost:7001/examplesWebApp/j_security_check
Having said that, I had already configured the <security-role-assignement> with
role-name and principals in weblogic.xml, as well as the <security-role> tag in
web.xml.
Thanks for your help
Cheers
Habib
Jerry <[email protected]> wrote:
Hi Athmani,
weblogic.properties file for WLS 6.1 SP1? There is none... weblogic.properties
is in WebLogic
5.1 and lower -- it was changed to config.xml for WLS 6.0 .. what are
you using your
weblogic.properties file for?
Anyways,
I have gotten NTRealms to successfully work with WLS 6.1, with security
on a web app, allowing
NT users to access certain resources. This stuff works.
Since you can see your users and groups through the console (even though
it takes a while) I
think that your NTRealm setup is okay.
I would guess that you have a problem with your deployment descriptors
in your web
application.
There are quite a few posts in this newsgroup that illustrate how to
set up security
constraints on resources in your web app with the deployment descriptors.
For example, check out
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.security&item=6244&utag=
Let me know how it goes, okay?
Cheers,
Joe Jerry
"Athmani H." wrote:
Hi,
Before posting this request, I checked the forum until Sep.18 to seeif nobody
else experienced my problem, but in vain.
I am using WLS6.1Sp1 under NT4
I would like that NT users for defined NT Primary Domain Controllerauthenticate
themselves before accessing a web app. For that, I followed thoroughlythe BEA
Doc to get the config.xml, web.xml, weblogic.xml and filerealm.propertiescorrectly
configured.
The <auth-method> is set to FORM. The <security-role> and <security-role-assignment>
are also set with business roles and principals from the NT PDC. the<security-constraint>
with all the sub-tags are also defined. etc.etc. When I use the WLconsole, to
check users and groups lists, it works fine although it takes a lotof time before
being displayed (15 to 20 minutes !!!).
Through a Login.jsp, the user enters his/her login name and password.The result
is that I get the following message :
"Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization
will not help and the request SHOULD NOT be repeated. If the requestmethod was
not HEAD and the server wishes to make public why the request has notbeen fulfilled,
it SHOULD describe the reason for the refusal in the entity. This statuscode
is commonly used when the server does not wish to reveal exactly whythe request
has been refused, or when no other response is applicable."
No trace in the log files. No warning . Nothing.
My questions are:
1- Has somebody already experienced this?
2- Could you then help me ?
By advance , thank you very much.
Athmani H.
Note : I can provide you through email the config.xml, web.xml, weblogic.xmland
filerealm.properties and the concerned .jsp files on demand

Error 403--Forbidden while trying to access servlet

          Hi All,
          I am very new to Weblogic server. I have downloaded the 6.1 version of Weblogic
          application server. I tried a simple example in which I have an HTML which calls
          a servlet. I have deployed it on weblogic server using auto deployment feature.
          But when I try to access the html form, it gives me the following error.
          Please can anybody suggest a solution to this problem?
          Thanks,
          Vani
          Error 403--Forbidden
          From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          10.4.4 403 Forbidden
          The server understood the request, but is refusing to fulfill it. Authorization
          will not help and the request SHOULD NOT be repeated. If the request method was
          not HEAD and the server wishes to make public why the request has not been fulfilled,
          it SHOULD describe the reason for the refusal in the entity. This status code
          is commonly used when the server does not wish to reveal exactly why the request
          has been refused, or when no other response is applicable.


The demo license limits access from browsers to three unique IP addresses.
          When accessed by a fourth IP address, WLS returns '403'. You should see a
          message in the log file about the demo license.
          Mike
          "Vani" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Hi All,
          > I am very new to Weblogic server. I have downloaded the 6.1 version of
          Weblogic
          > application server. I tried a simple example in which I have an HTML which
          calls
          > a servlet. I have deployed it on weblogic server using auto deployment
          feature.
          > But when I try to access the html form, it gives me the following error.
          >
          > Please can anybody suggest a solution to this problem?
          > Thanks,
          > Vani
          >
          > -----------------------------------------------------------------
          >
          > Error 403--Forbidden
          > From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          > 10.4.4 403 Forbidden
          > The server understood the request, but is refusing to fulfill it.
          Authorization
          > will not help and the request SHOULD NOT be repeated. If the request
          method was
          > not HEAD and the server wishes to make public why the request has not been
          fulfilled,
          > it SHOULD describe the reason for the refusal in the entity. This status
          code
          > is commonly used when the server does not wish to reveal exactly why the
          request
          > has been refused, or when no other response is applicable.
          >
          > -----------------------------------------------------------------

Error 403--Forbidden

Hi all ,
I create a simple stateless ejb named LoginSession to manage the login task
, package it to a ejb jar file named login.jar , and then I want to explode
it as a wls7.0 webservice , the build.xml like this :
<project name="buildWebservice" default="ear">
<target name="ear">
<servicegen destEar="login.ear" contextURI="login">
<service ejbJar="login.jar" includeEJBs="LoginSession"
targetNamespace="http://www.ricobest.com/webservice/login"
serviceName="LoginSession" serviceURI="/LoginSession" generateTypes="True"
expandMethods="True"/>
</servicegen>
</target>
</project>
When after ant running successfully , ant generated login.ear file for me ,
but I find some ploblems :
1 , the ear file contains login jar and web-service.war file , similar with
wls6.1 webservice , but the web.xml file in web-service.war is different
from wls6.1 , the 7.0 file is black ! only the following 3 lines :
#1 <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application
2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
#2 <web-app>
#3 </web-app>
2 , I can not file the wsdl.jsp file in the ear file , whick will contained
in 6.1 webservice .
3 , when I want to request http://localhost:7001/login/ , error message
list in my browser :
Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it.
Authorization will not help and the request SHOULD NOT be repeated. If the
request method was not HEAD and the server wishes to make public why the
request has not been fulfilled, it SHOULD describe the reason for the
refusal in the entity. This status code is commonly used when the server
does not wish to reveal exactly why the request has been refused, or when no
other response is applicable.
ps , I do need client jar , so in build.xml , does not include client
element , and when I insert it to the xml file , result is the same.
Any response will be appreciated .
Thank you.
lcl

Thank you ,Manoj
"manoj cheenath" <[email protected]> :[email protected]...
see comments inline:
regards,
-manoj
"lcl" <[email protected]> wrote in message news:[email protected]...
Hi all ,
I create a simple stateless ejb named LoginSession to manage the login task
, package it to a ejb jar file named login.jar , and then I want to explode
it as a wls7.0 webservice , the build.xml like this :
<project name="buildWebservice" default="ear">
<target name="ear">
<servicegen destEar="login.ear" contextURI="login">
<service ejbJar="login.jar" includeEJBs="LoginSession"
targetNamespace="http://www.ricobest.com/webservice/login"
serviceName="LoginSession" serviceURI="/LoginSession" generateTypes="True"
expandMethods="True"/>
</servicegen>
</target>
</project>
When after ant running successfully , ant generated login.ear file for me ,
but I find some ploblems :
1 , the ear file contains login jar and web-service.war file , similar with
wls6.1 webservice , but the web.xml file in web-service.war is different
from wls6.1 , the 7.0 file is black ! only the following 3 lines :
#1 <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application
2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
#2 <web-app>
#3 </web-app>
In WLS 7.0 there is a new DD file for Web Service. Look for
web-services.xml file inside the WEB-INF dir. There is no
change needed to the web.xml file.
2 , I can not file the wsdl.jsp file in the ear file , whick will contained
in 6.1 webservice .
The WSDL is generated from the deployment information at
runtime.
3 , when I want to request http://localhost:7001/login/ , error message
list in my browser :
Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it.
Authorization will not help and the request SHOULD NOT be repeated. If the
request method was not HEAD and the server wishes to make public why the
request has not been fulfilled, it SHOULD describe the reason for the
refusal in the entity. This status code is commonly used when the server
does not wish to reveal exactly why the request has been refused, or when no
other response is applicable.
<servicegen destEar="login.ear" contextURI="login">
<service ejbJar="login.jar" includeEJBs="LoginSession"
targetNamespace="http://www.ricobest.com/webservice/login"
serviceName="LoginSession" serviceURI="/LoginSession" generateTypes="True"
expandMethods="True"/>
I think the URL you need to hit is:
http://localhost:7001/login/LoginSession
ps , I do need client jar , so in build.xml , does not include client
element , and when I insert it to the xml file , result is the same.
You can use clientgen to generate the client.jar file
by pointing to the deployed WSDL.
Any response will be appreciated .
Thank you.
lcl
[att1.html]

Error 403--Forbidden using eclipse and weblogic

hi,
i am new here on j2ee
I am using eclipse3.4 and weblogic 9.1.2 on xp. I am trying to make simple hello world servlet
here is what i did
on the eclipse click New and click on Dynamic project
click on Servlet and write following code for the servlet
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class SecondServlet
public class SecondServlet extends HttpServlet {
     public void service (HttpServletRequest req, HttpServletResponse res)
     throws IOException
          res.setContentType("text'html");
          PrintWriter out = res.getWriter();
          out.println("<html><head>" + "<title> Hello World </title></head>" +
                    "<h1>Hello Worldasd </h1></body></html>");
folder structure and file web.xml is created by eclipse itself.
then i started weblogic from the eclipse
and i have following error
http://localhost:7001/SecondServlet/
Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.

I do connect with router/modem
eclipse did create weblogic.xml. here it is
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:jsp-descriptor>
<wls:keepgenerated>true</wls:keepgenerated>
<wls:working-dir>C:\Documents and Settings\Owner\My Documents\jj\java-files\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\work\SecondServlet</wls:working-dir>
<wls:debug>true</wls:debug>
</wls:jsp-descriptor>
<wls:context-root>SecondServlet</wls:context-root>
</wls:weblogic-web-app>
i did create a user proejct domain in weblogic.
I did try by login through localhost:7001/console. but it didn't work. following is the problem
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.4 503 Service Unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
any more suggestion will be helpful.
this is just a start so please i need to solve this problem so that i can move ahead
thanks
Edited by: chitochez on Dec 18, 2008 5:45 AM

Error message when trying to sign in to HP ePrint "ajax submit failed: error = 403, forbidden"

HP Photosmart 7525
Windows 7
Ajax submit failed: error = 403, Forbidden
Installed new printer: Photosmart 7525
I am trying to set up my ePrint account and add my printer and it won't let me sign in or create a new account.
Thanks for your help!
Deb
This question was solved.
View Solution.

One can also restart the computer.After it shuts down leave it off for at least a minute and then reattempt access the site once computer is back on and running. I would also check to make sure that Java is up to date and that Adobe Flash is up to date.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Server Error 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied.

Hi,
I`d like to get your advice on Server Error 403 - Forbidden: Access is denied. I use to visit a webpage with no issues so far but now i getting this error each time i`m trying to get into. Any ideas in how to solve it? A step to step process will be highly appreciated.
Thanks.
PS, I`m using the latest safari 8.0.3 and OS X 10.10.2.

It's an error message from the web server, not from Safari. There's a slight chance that you might be able to clear it as follows.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.

I tried to access my website, but Firefox threw the error: 403 Forbidden, you don't have the permissions to view.

My website - Mousenstein.com - is under construction w/Dreamweaver + Flash.
I uploaded my files to my server.
I opened Firefox and entered the URL:
http://www.mousenstein.com
The error "403 Forbidden" appeared, and ...
You do not have the permissions to access.
I have tried to upload my site countless times, but never successfully - it is a huge headache. That said, I have never gotten the "403 Forbidden - no permissions" before.
All other failures threw the error "404, can not locate the URL "/" on this server.
Any help will be enormously appreciated.
P.S. : Are there permissions preferences on Firefox? I found one under Tools Menu, but it didn't seem to address my problem.
Thanks

I get the same thing with Firefox, IE8, Opera, and Safari. It isn't a Firefox only problem.
Are you new to that webhosting service? <br /> Have you ever uploaded web pages to that same web hosting service previously, pages that worked after an upload? <br /> Are those pages listed as ''' "public" ''' pages in your web hosts control panel?
My suggestion is to "download" your homepage and associated files & images from your PC, up to the server, using your web hosts control panel and see how that works.
Beyond that, I suspect that you might have missed an important setting in Dreanweaver for uploading to the web host's server. You might try asking about this issue at a Dreamweaver support forum.

Can't sign up for eprintcenter-I get this error ---Ajax submit failed: error = 403, Forbidden

Bought my 6700 printer yesterday. Set it all up, prints fine. Got the print out that tells me to go to the eprintcenter.com and "sign up and enter your printer code."
Every time I enter any information, I get this error code: Ajax submit failed: error = 403, Forbidden
I've tried entering my personal email, the eprint email--in short I've tried everything and can't register for an account so I can customize my printer email address, etc. Can some one help?

Tifmel,
I do apologize that you are having this issue. If you are still having this issue, I would suggest using a different web browser (i.e. internet explorer, google chrome, mozilla firefox). There are more that are available but those are just a few examples. I sure hope you can get everything worked out. Thanks again!!!!
Feel free to repost if you have any further questions, comments, or concerns.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Getting "Error 403--Forbidden" while accessing ADF bookmarked URL

Hi,
Here am trying to work with an ADF application to suport bookmarking.
Following are the steps I did to create a sample application.
Created a bounded task-flow (user-details.xml), which has the "Method call" as default activity along with an another view activity(userData.jsff page).
This task-flow takes an input parameter "Id" to display user details. In the method call activity user data will be initialized using the given input parameter and then the data will be displayed using userData.jsff page.
Created a view activity (details.jspx page) in adfc-config.xml file.
Marked the "details.jspx" file as bookmark-able by changing "Bookmark property to true" and given a Bookmark URL Parameter "Name is Id and Value is #{pageFlowScope.user_id}".
Dropped the bounded task-flow user-details.xml as a region into the details.jspx file.
Now the user_id which is coming as URL Parameter will be passed to user-details.xml task-flows input parameter value.
Created users.jspx page which lists all the users as home page. In the users.jspx page we'll have a link to user details page with a parameter Id.
By running the application will get users page. When I click on the user details link in the users page, the app showing user details page as expected.
Now I bookmarked the user details page. If I open the bookmarked page in the same tab, it is working fine. But when I open this bookmark in a new tab getting the "Error 403--Forbidden" response.
Bookmarked URL: localhost:7101/BookmarkTestApp-ViewController-context-root/faces/user_details?id=123&_afrWindowMode=0&_afrLoop=4884151149818&_adf.ctrl-state=35yghmx4f_18
When I click the above bookmark in another tab the url is processing for few seconds ( 2 to 3 seconds) and converts to localhost:7101/BookmarkTestApp-ViewController-context-root/ and giving 403 response. At this time it is not touching my beans at all (verified this by running the server in debug mode).
Web.xml looks like:
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
         version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<context-param>
    <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
    <param-value>client</param-value>
</context-param>
<context-param>
    <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
    <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
    <param-value>false</param-value>
</context-param>
<context-param>
    <description>Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information.</description>
    <param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
    <param-value>true</param-value>
</context-param>
<filter>
    <filter-name>trinidad</filter-name>
    <filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter>
    <filter-name>adfBindings</filter-name>
    <filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter-mapping>
    <filter-name>trinidad</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<filter-mapping>
    <filter-name>adfBindings</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<listener>
    <listener-class>oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack</listener-class>
</listener>
<servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
</servlet>
<servlet>
    <servlet-name>resources</servlet-name>
    <servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.GraphServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.gauge.GaugeServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>MapProxyServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.geoMap.servlet.MapProxyServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>GatewayServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.FlashBridgeServlet</servlet-class>
</servlet>
<servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/afr/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <url-pattern>/servlet/GraphServlet/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <url-pattern>/servlet/GaugeServlet/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>MapProxyServlet</servlet-name>
    <url-pattern>/mapproxy/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/bi/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>GatewayServlet</servlet-name>
    <url-pattern>/flashbridge/*</url-pattern>
</servlet-mapping>
<mime-mapping>
    <extension>swf</extension>
    <mime-type>application/x-shockwave-flash</mime-type>
</mime-mapping>
<jsp-config>
    <jsp-property-group>
      <url-pattern>*.jsff</url-pattern>
      <is-xml>true</is-xml>
    </jsp-property-group>
</jsp-config>
</web-app>
Am I missing any thing here.
Thanks in advance.
-Gopal.

https://blogs.oracle.com/DavidGiammona/entry/why_do_i_get_this_error_403_--

What does "ajax submit failed: error = 403, forbidden" mean when trying to sign up for eprint?

what does "ajax submit failed: error = 403, forbidden" mean when trying to sign up for eprint?

Hi,
Please use different browser such as Firefox or Chrome and try again.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Eprint error creating account: Ajax submit failed: error = 403, Forbidden

I am trying to create an eprint account. but when I hit submit I get:
Ajax submit failed: error = 403, Forbidden
I am running from a mac with OSX 10.8. And a new HP Photosmart 6515. The browser is Safari version 6.0.
I've tried different namse, screen names passwords etc....
THANKS,
Tim
This question was solved.
View Solution.

Hi there, this issue can usually be resolved by deleting your browsers cache and restarting the browser. Other forum users have confirmed that using an alternative browser type can also work (Mozilla FF and Google Chrome have both been cited).
Try these suggestions and see how you get on.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Eprint login error: Ajax submit failed: error = 403, Forbidden.

Why do I keep getting this error when trying to log in to eprint website to manage my printer: Ajax submit failed: error = 403, Forbidden.

Hi,
Please perfer the following the check.
1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Unable to log into HP ePrint . Error message "Ajax submit failed: error =403, Forbidden"

Installed new HP 8600 Plus printer. Attempting to log into HP ePrint with user name and password I created. Error message "Ajax submit failed: error =403, Forbidden". What does the error message mean and why can't I log into the HP ePrint website?
This question was solved.
View Solution.

Sorry for your frustrations! What browser and browser version are you using? Are you able to clear your cache and go to www.eprintcenter.com? Any additional information you can provide will be very helpful.
Although I am an HP employee, I am speaking for myself and not for HP

Ajax submit failed: error =403, Forbidden why can't I sign in anymore?

I just bought my HP 6700 I had setup an hpeprint account and now I receive this erro message(Ajax submit failed: error =403, Forbidden)
I was trying to scan to my email [Personal Information Removed] didn't work so itried to my HPE account [Personal Information Removed] didn't work
went eprintcenter.com to sign in ...and got ..Ajax submit failed: error =403, Forbidden
I have no idea whats wrong or how to fix it
can someone help?
Tom
[Personal Information Removed]

I just had the same problem - was trying to sign on using a tablet w/android
Had to change browser to chrome browser then was able to sign on
Hope this helps

Error 403 - Forbidden (BEA 8.1)

Similar Messages

Maybe you are looking for