Error 403 keeps showing relating to past ical dates
Just started to get an error 403 which relates to old ical dates seems to have stared when i updated 6.0 on my ipad and iphone!!
Can anyone help
Brian
The following works for me.....try this...
1. Open iSync - you should see your Razr in the devices
2. Click on the Razr device - this should open a preference sheet for the Razr
3. Check the "Calendar" check box
4. Select the Calendar's you want synced
5. Click on the "More Options" button
6. Adjust the "Don't synchronize events prior to:" setting to your liking
7. Adjust the "Don't synchronize events after:" setting to your liking - Note- this is what you are asking about - 1 month is the default I believe
8. Click on the "OK" button
9. Sync
Similar Messages
-
HT201413 error 1602 keep show what to do please help!!!
error 1602 keep show what to do please help!!!
Hello there Unicornbarf534,
Thank you for using Apple Support Communities.
It sounds like you are unable to successfully install iTunes. I recommend the troubleshooting instructions in this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Here is a general outline of where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
Additional Information
If you only need to install QuickTime, or if iTunes installs but QuickTime installation did not complete
Try downloading and installing the standalone version of QuickTime from http://www.apple.com/quicktime/download/. Be sure you download the version that does not include iTunes.
If the steps outlined in this article don't help, you may be able to find a solution to your issue by searching the Microsoft support website.
All the best,
Sterling -
Purchased the movie Lincoln from Itunes. The movie came through but the Itunes extra stopped downloading. error message 12001 shows up again and again even after checking theconnection which is fine. Any suggestions so it will finish the download?
Even though you're getting a different error message number, try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
Error 200284 keep showing up with DAQmx/USB6259
This error of 200284 has been persistantly showing up in my high speed data acqusition using DAQmx Read with USB6259 running LV8.5.1 and DAQmx 8.7.1. I tried most of the approaches discussed on this forrum regarding this error such as increasing time out and sample rate, but still getting it. I stripped down the application that I recently took over and attached the basic vi..please voice any suggestions, thoughts, solutions, and comments, I really would like to see this code work out as it is our basic stuff. many thanks in advance.
A little more detail...the original code (and this striped down version) would run for a minute or so with the loop index getting to over 20k, or 40k..but most likely stop before 60k with unpredictable numbers...thanks again for taking a look at the vi.
Bryan
Message Edited by BryanL on 02-15-2009 02:26 PM
Attachments:
SampleVI.vi 75 KBHi Doug,
First thank you so much for the help and support. I went to restart the NI variable engine and disabled the ZoneAlarm and firmwall, the variable engin now runs and not stopped, but the VI still stopps with the error 200284. Anythings else you think might be the issue here? I really need to get this thing working as I have been on it for a few days now...please help. Thanks again. I have also copy and paste my post and that of Dansch here to give more background info:
Hi Dansch,
Thank you for looking into this issue! I have compiled a reply to your comments and questions in the following quoted message:
dansch wrote:
Hi Bryan,
I
took a look at your code, and after modifying the analog output
channel, I was able to run it fine for a very long time on a PCI-6251
board without any errors.
Our
original code also runs ok with our PCI boards, only after we switch to
USB then we have this problem of error 200284 stopping the acquisition.
The code also runs ok on one laptop with older USB (XP service pack 1),
the two laptops with newer USB2.0 always have problems with error
200284 on one and 200279 on the other(XP Service Pack 3). I am trying
to get the one with 200284 to work.
One
thing that I am interested in is the analog output task that you are
referencing, since I am unable to see what type of setup you have
configured for this channel. I am interested in knowing why the analog
input task is using the ao/sampleclock as the source for its sample
clock rather than the other way around (ao channel using the
ai/sampleclock).
The
was not clear about the logic of the triggering setup of the
initialization step, however, the analog output task used the task
input setup from MAX, this also triggers the timing on the analog
input. The output chain is for running a light source with a wave form
generated by a separated VI using the waveform parameters as shown on
the front panel of my attached SampleVI. This source runs
continuesouly with the same waveform function. The input chain reads
a detector contineously as DAQmx Read was put into the while loop. The
start of the output waveform was triggered by the input chain so that
the light source and data acquisition are synchronized. We never had
problem to start the data acquisition as we always read the correct
waveform back. The error seem to alway came from the DAQmx Read
function in the while loop as the code on the left side of the while
loop onlys runs once, while the while loop will keeping running, until
it stops a minute or so later by the error 200284.
Usually,
when this type of -200284 error occurs, it is due to a problem with not
receiving a trigger or sample clock edges. Perhaps something is
happening to the analog output task that is affecting the analog input
channel since it is using the ao/sampleclock.
I will check further on the output task setup in MAX..if this is the issue, what is the recommended setup for the output task?
A
couple of other things I would like to know more about are why you are
reading just a single sample each loop iteration and also what your
application involves since I noticed the program samples numerous times
on the first channel for each single sample on the others. What overall
rate are you trying to accomplish as well? Please let me know if you
have any additional insight into your application. Regards,
I
was only reading a single sample for the demo purpose as it generates
similar error as in the original application where we read all
channels. The first channel is where the detector response are read and
are accessed at the highest frequency. That is why we build 992
instances for this channel and leave the other 8 channels to read some
other environmental parameters which happens at a less frequent time.
This allows us to keep data acquisition going without restart other
tasks. This was recommended by an NI engineer earlier to another
enginer here and was work fine.
The following are some of our input parameters:
On
the Outuput side: Waveform Scan Rate or Frequency (Hz): 1000 Number
of Points in Waveform is 1000, Waveform Update Rate is: 1000000/s,
this final rate goes to output timing VI
On
the Input side: Number of Sample Spectrum (total numb. of
channels) 1000. Number slow channels: 8. Input sample rate:
1000000(Hz). This rate/1000=1000/s goes to the input timing VI
Please
let me know if you need more info, if you do not mind, could you please
send me a number and best time to call? Many thanks.
Bryan -
tried several times to restore my nano via itunes and still keeps on saying that it needs to be restore since its on recovey mode, what do i do next?
Are you really running Windows 98? I sure hope not. :S
I have noticed a few others with the same problem the past couple of weeks. Many of them were able to resolve the issue by doing a low level reformat of the iPod's flash storage using the instructions in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock -
Im trying to download a movie and error (-50) keeps showing up
I was downloading the Hunger Games and it stopped and said (err = -50) and I tried hitting resume and the same error keeps popping up. My internet connection is fine.
err = -50 when downloading from store - https://discussions.apple.com/thread/3697501 - delete incomplete downloads from downloads folder as per http://support.apple.com/kb/TS3297
iTunes Store: "Error (-50)" when downloading purchased content - http://support.apple.com/kb/TS1583 -
HT1551 apple tv, error message keeps showing
i can't watch prometheus, error message appear saying try later... does it happen to you too ?
this happens to me too. why? this is very frustrating and believe it occured after i updated my apple tv (not sure if this is related or not)
-
A runtime library error messages keeps showing up in firefox.
Almost every time i am logged into firefox this error message pops up and if i have to have an anti virus program to fix the errors I can't because it's not free and i would have to pay lots of monthly membership fees and i can't afford to pay for it.
The user that you want to reach must be registered to use messages on the device before you can reach them. Even if the user has an iPhone and you are sending the text to that phone number, the user still has to have the messages app activated on their device. The iPad cannot send and receive SMS messages so the messages all have to go through the messages app. It is not setup automatically.
In the unlikely event that she blocked you - have her check Settings>Messages>Blocked to see if you appear in there on her device. -
My Ipad was working perfect, until I updated the new software. When I finish downloading it I wanted to update the IPad, The process stop and the iPad went to recovery mode. I tried to restore but the error 3014 comes it.
I change USB cables, I change Internet access such as wire-less and Ethernet, I tried with another Itunes in a different computer, I tried to create a new user in my computer and give it a shot and all fail to work.
If anyone has a great solution please help.
Thanks a lot
AleSee this Discussion...
https://discussions.apple.com/message/19634919#19634919 -
Yesterday, I was working on the website, Shutterfly. Suddenly, there was an error message that it couldn't find a certain page. Now, Firefox continues to be very slow... and the error message keeps showing up on the search page, sometimes just parts of the message. I can still search but it is painfully slow and loads page partially and strangely... sometimes not full graphics, etc.
Or you can try what lots of other people have found, and thats that the base connector is dirty and the contacts are shorted by some debris.
The Apple store guys are good at cleaning them out - if you do it yourself, do not use any liquids at all. -
I got a new iphone. Changed from an iphone 5 to iphone 5s. I had trouble with the sync, and in the midst of it I signed out of icloud on my mac. It told me it would delete everything from my mac. I signed out anyway. Now that I've signed back on, I cannot use my ical app. I get an error "403" to operation CalDAVMigrateToServeQueueableOperation and the ical locks up and I have to force quit. I have tried to turn calendar off in settings, but it does not help. I can't find any help on the support pages on this. Seems people have problems like this, but there is no fix. The calendar on my new iphone is working, although, it's been over a week and it has still not fully restored my whole backup of the phone (32gig). Could that be part of the problem? I have been using my icloud calendar on my mac in the mean time, but I would like ical to work.
Hi mgarcia3,
If you are having an issue with
As someone who uses my iPhone almost constantly I can certainly understand how you would be upset to have it not be able to even turn on. Let's see if we can get you back up and running.
I would suggest that you troubleshoot using the steps in this article -
iOS: Not responding or does not turn on - Apple Support
Be sure to note the last step -
If the above steps do not resolve the issue, contact Apple.
Thanks for using Apple Support Communities.
Best,
Brett L -
Ical data from Previous System
I recently had to 'Install and Archive' my G4 10.2.8, in doing so it archived most of my data in the new folder 'Previous System'. I now open my Ical and can't seem to get any of my previous data. Does anyone know where the past Ical data is stored once the system has been archived, and where should I put it once I have found it.
Thanks for any help you can give.There should be no need to sync the files. A previous system folder happens when you do an archive and install, so what's in that folder is identical to what your Mac was when you last did one. Presumably you've changed a lot of things since then and wouldn't want to go back.
Unless there are a few files you deleted and want back, then just copy them over. Then delete the entire thing, it's using up disk space.
Kevin -
All free/busy requests get error 403 in iCal with MobileMe
I'm playing for the first time with looking with my availability in iCal / Lion / MobileMe CalDAV accounts.
Everything else is working well with my calendars and Mobile Me.
I can add events, remove them, edit them, the sync is working well between the web interface and iCal on my Mac (10.7)
The only thing amiss is the availability window just logs an error to the console after a short time out.
It's error 403 which seems to be a permission denied error.
Do I need to grant permission for MobileMe to publish my free/busy status anywhere?
It it locked down until I allow sharing?
Is it tied to sharing a calendar some how?
Just sending a call out to others in case I'm missing something obvious. There are instances of this error on the boards with iCal and 10.6.6. so I presume it's more a server setup / service interruption than something I can change.
Thanks for any input - even if it's a "it works for me right now" or "I too can't get mobile me status in iCal"
(p.s. Mobile Me support says they can't help - talk with iCal people.)
(p.s. After two hours on the phone with iCal - it's back to the MobileMe people to try again. I figured I'd give a shout here before I try them again...)
Here's the error message from /private/var/log/system.log
7/27/11 12:48:30.780 PM iCal Error Error Domain=CoreDAVHTTPStatusErrorDomain Code=403 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 403.)" UserInfo=0x7fd30cbbe3d0 {CoreDAVHTTPHeaders=<CFBasicHash 0x10300c1e0 [0x7fff7dbf7ea0]>{type = immutable dict, count = 7,
entries =>
0 : <CFString 0x7fff7c240c18 [0x7fff7dbf7ea0]>{contents = "Server"} = <CFString 0x7fd30cabf370 [0x7fff7dbf7ea0]>{contents = "MobileMeCalendarServer 1C97"}
2 : <CFString 0x7fd30cd8acb0 [0x7fff7dbf7ea0]>{contents = "DAV"} = <CFString 0x7fd30cb97840 [0x7fff7dbf7ea0]>{contents = "1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendarserver-sharing, calendarserver-subscribed, calendarserver-principal-property-search"}
3 : <CFString 0x7fff7c240780 [0x7fff7dbf7ea0]>{contents = "Content-Type"} = <CFString 0x7fff7dbf1640 [0x7fff7dbf7ea0]>{contents = "text/xml"}
4 : <CFString 0x7fff7c2407b8 [0x7fff7dbf7ea0]>{contents = "Date"} = <CFString 0x7fd30cbd9810 [0x7fff7dbf7ea0]>{contents = "Wed, 27 Jul 2011 17:48:30 GMT"}
6 : <CFString 0x7fff7c240710 [0x7fff7dbf7ea0]>{contents = "Content-Length"} = <CFString 0x7fff7dbebe80 [0x7fff7dbf7ea0]>{contents = "280"}
8 : <CFString 0x7fd30cd636e0 [0x7fff7dbf7ea0]>{contents = "X-Transaction-Id"} = <CFString 0x7fd30cbd7060 [0x7fff7dbf7ea0]>{contents = "nk11r10me-calsvr003-10-1311293226-3551930"}
9 : <CFString 0x7fd30cab2b10 [0x7fff7dbf7ea0]>{contents = "X-Responding-Server"} = <CFString 0x7fd30cdeda10 [0x7fff7dbf7ea0]>{contents = "nk11r10me-calsvr003 10"}
} getting free-busy information for (
"mailto:[email protected]",
"mailto:[email protected]"I have a similar issue. My girlfriend is using a yahoo address and for the life of me I cannot send her an iCal invite from my me.com or mac.com address. It never shows up in her email, not in inbox, not in junk, not deleted. I get an exclamation point on her name in the iCal invite. I can send her invites from Gmail. I created a test account on yahoo and I can send invites to that test account.
Of course I can email her just fine. I can open the invite in iCal, select the down arrow on her name and select "send email" that works just fine. I try to "invite again" and nothing... this is maddening
I've deleted iCal cache, deleted her contact, tried just using her smtp yahoo address, i don't have this issue with anyone else that I know of... -
I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?
Click here and follow the instructions.
(98897) -
dear sir
i can't sing in to my icloud. showing the message as above
cannot sign in the operation couldn't becompleted.(com.apple.appleaccount error 403)
i need a sloution fo it as soon as i am waiting to you ar replay
thank you
mohamed haseefWelcome to the Apple community.
Are you trying to create a new ID, how many ID's have you created already on that device.
Maybe you are looking for
-
Printing Euro symbol in smartform
how to print Euro Symbol in smartform. copy paste from MS word is not working.. please tell me another way.. thanks..
-
How to programatically start j2ee application/service from command line
Hi all We have developed a j2ee application and deployed the .ear file on SAP J2EE (Netweaver'04) engine. We are able to successfully start/stop the application from Visual administrator -> Deploy -> Service -> Start application (or) Stop applicatio
-
I have 1300 plus unread emails on one of my accounts but i am unable to view them.
IPad 4 unable to view emails
-
How to copy from in linux??
i've just installed linux. trying to install packages ftp://ftp.archlinux.org/core/os/i686/core.db.tar.gz ftp://ftp.archlinux.org/extra/os/i686/extra.db.tar.gz ftp://ftp.archlinux.org/community/os/i6 - .db.tar.gz so that i can install xkfe offline as
-
Executing Revaluate Planning Function Javascript Web Application Designer
Guys: Using the Web Applicaiton Designer Javascript API, the best I could do about executing a Revaluate Planning Function is given below, JavaScript function invokeJSreval(). My objective is to get the percentage from an INPUT_ITEM, INPUT_FIELD_ITEM