Error 403 when accessing workflow manager page after install

Hey,
I'm in the process of setting up a new workflow manager farm for my SP2013 environment.
At the moment I'm setting up the stage WFM farm which consists of only one dedicated server (meaning not running on a SP server). My live WFM farm will be made of 3 servers.
I've followed Harbar's guide located here:
http://www.harbar.net/articles/wfm2.aspx, and all was successfull until I tried to access the workflow page on
https://myserver.domain.com:12290 and got a 403.
I've checked that the Workflow Manager Backend, Windows Fabric Host Service, Service Bus Gateway and Service Bus Broker services are running.
Get-WFFarmStatus is also showing me everything running. In IIS, app pool and site are started.
I've tried ti access https://myserver.domain.com:12290 from the WFM machine, from a SP server and from my own laptop, same issue, I always get a 403.
Would you know how to troubleshoot this?
Thanks in advance and have a nice day

Hi Fluidetom,
From your description, my understanding is that you got 403 error when you accessed workflow manager site.
Please run IE as an administrator(right-click IE ->run as administrator) on the WFM server, compare the result.
Please run the commands to check the workflow service account:
$Farm = Get-WFfarm
$Farm.AdminGroup
Make sure the account has local access to the server.
Here is a similar post for your reference:
http://www.sp2013blog.com/Lists/Posts/Post.aspx?ID=36
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Error 403 when accessing folder shared via Apache / Personal Web Sharing

Hi. I tried to help a friend share folder via Personal Sharing.
I let him do the same things as I did and fo not understand why it works onmy Mac, not his.
The symptoms are :
When accessing his root site : http://IP_address/~username/ it just works : I (and he also from his Mac) gets the usual default Apple page, the one that is in /Users/username/Sites/
When directly accessing a file : http://IP_address/~username/images/imagexxx.gif it still works
Whern accessing a folder like http://IP_address/~username/images/ or http://IP_address/~username/foldername/ I get Error 403 : access forbidden : you don' have enough permissions (I do not remember the exact words)
The folders do exist. When there is a typo in the URL, I get error 404, not 403.
Eveything works for URLs like http://IP_address/foldername/ (site in Library/WebServer/Documents/)
I checked folder and file permissions on his computer and couldn't see any difference from mine.
He's on 10.4.7 with an iMac G5. Mine is a Mac Mini Core Duo with 10.4.7 too.
Help appreciated,
Jérôme.

To allow directory listings, root (or the admin via sudo) needs to edit /etc/httpd/httpd.conf with a plain text editor. The text editor that Apple supplies can easily ruin this file. Many people have recommended TextWrangler, but I've never used it. The Unix editors in OSX are vi, emacs, pico and ed. Pico is probably the easiest to "just figure out". In Terminal:
sudo pico /etc/httpd/httpd.conf
find the Directory directive that applies to the directories that you're working with and inside you'll see a directive Options, add Indexes to the Options, save and quit, restart Apache and you're good to go.
Roger

Error 403 when accessing iCalendar

When accessing iCalendar I receive the message error 403 on CalDAVAccountRefreshQueueableOperation. Can anyone tell me how to fix it?

In September iCloud stopped the service for iCal on Macs, not for all but for a number of iCloud users.
You are one of these iCloud users. A fresh Yosemite shows the same error message, for one months now.

Error Message when accessing Group Manager

When I click the "Create Group or Add New Members" button, I get the following message, System error. Please re-try your action. If you continue to get this error, please contact the Administrator." I have tried various browsers, cleared cache, etc. Also, one of my external users reports not being able to access a workspace. I am wondering if the two problems may be related. I cannot access the group manager to see if the user has appropriate permissions.

We would need to know the group and the user affected to be able to help.
Are you the manager of the group - when you connect to the userAdmin tool = right hand button on the main https://beehiveonline.oracle.com page you will see who is the manager and can get them to add the user.
If you are the manager then we need to fix the access.
If you want to email me directly with the details of the group etc. my email is [email protected]
Phil

Error message when accessing any web page except yahoo

I get this error when trying to access facebook. I have a palm Treo 680
File: undef_
From: http://m.facebook.com/
Size: 2.6k
Your device does not support this filetype
Do you want to download to your card?
yes no
Does anyone know what is going on with this?

-> Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
-> [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
-> [[Warning Unresponsive script]]
* http://kb.mozillazine.org/Unresponsive_Script_Warning
Check and tell if its working.

Sometimes HTTP error 403 during access to otn pages

Hello
I am working at a customer (government of Baden-Württemberg a county of Germany) and they do not allow internet access with the ssl protocol. They do this because the virus scan program could not scan such pages.
So the customer has problems to access for example the online documentation, because in some cases the access is via ssl. He also could not see his own profile. Is there an alternate way for him to access this pages?

I´ve followed all the steps and the message continues appearing.
1º Log in into SQL COMMAND as SYS
2º alter session current_schema=FLOWS_XXXXXX;
3º complie the procedure with my pl/sql procedure :
CREATE OR REPLACE FUNCTION
wwv_flow_epg_include_mod_local(
PROCEDURE_NAME IN VARCHAR2)
RETURN BOOLEAN
IS
BEGIN
IF UPPER(procedure_name) IN (
' piloto.download_file') THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
END wwv_flow_epg_include_mod_local;
I don´t know what am I do wrong?

Error message when accessing Cluster Manager (Windows Server 2012-based) console from a Windows 8 system

Hi all;
Please look at the following figures:
Any ideas?
Thanks
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error Message when I turn on printer after installing 10.4.10

I installed the 10.4.10 upgrade, and ever since then when I switch on my Brother DCP 115 printer, I get a message that the connection to the machine has failed, that I should check the cables, switch it off and on an try again. In the upper left corner is a picture of a camera...
But there is no connection failure, the machine works fine. But I'm stuck with this error message that won't disappear unless I reboot the Mac.
I tried everything already. Setting up a new connection, reinstalling the drivers and software, repairing permissions, nothing works.
Strange phenomenon: after a reboot, everything works fine. After my Mac has been switched of for a couple of hours, the problem returns.
Mac support in Holland doesn't know of anything. They suggested to archive and repair, promised to mail me a how-to article, which never arrived, and I don't have a clue.
Any ideas, anyone???

I installed the 10.4.10 upgrade, and ever since then
when I switch on my Brother DCP 115 printer, I get a
message that the connection to the machine has
failed, that I should check the cables, switch it off
and on an try again. In the upper left corner is a
picture of a camera...
But there is no connection failure, the machine works
fine. But I'm stuck with this error message that
won't disappear unless I reboot the Mac.
I tried everything already. Setting up a new
connection, reinstalling the drivers and software,
repairing permissions, nothing works.
Strange phenomenon: after a reboot, everything works
fine. After my Mac has been switched of for a couple
of hours, the problem returns.
Mac support in Holland doesn't know of anything. They
suggested to archive and repair, promised to mail me
a how-to article, which never arrived, and I don't
have a clue.
Any ideas, anyone???
I have the identical problem except my printer is a Brother MFC440CN, so the problem is not printer model specific, perhaps not even unique to Brother.
The really annoying thing is that I cannot get rid of the message without using Restart or Shutdown. The OK button doesn't close it. The error message is [MTW005]
I think Apple needs to get on this and other issues associated with 10.4.10.
BNC

SCOM 2012 R2 Gateway installation error and no System Center Management server after install

Hi,
I have installed SCOM 2012 R2 Gateway and I got an error 25372 error at the start of the install. It still installs though. However I have no system center management service running in services but I can see healthservice.exe is running.
Why am I not seeing the system center management service?
Thanks.

Using gateways with certificates is always a bit complicated because there are several things that needs to be configured correctly.
DNS: The MS and the GW server need to be able to resolve each others FQDN. you can adjust the hosts files if needed.
Traffic is only TCP 5723 from the gateway to the MS. You can test this with the telnet client.
Certificates:
http://marthijnvanrheenen.wordpress.com/2012/03/28/scom-2012-connecting-a-gateway-server-using-certificates/
The gateway server should NOT be in pending management. Remove it from here before running the approval.
You should start by making sure DNS and the 5723 port are functioning because that is probably where the problem is.
Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

Error: 16 when I try to launch after install Photoshop CS6

Hi. I had a problem in my MacBook Pro (something to do with permissions) and had to wipe out the entire hard drive and reinstall everything from Time Machine Back Ups. Everything seems to be running again, except Photoshop CS6, which I had just purchased before the problem. When trying to launch it, I got a message urging me to uninstall and reinstall. I did. The installer completed the progress bar but then "unexpectedly quitted". The software seemed to have been installed, but when I tried to launch it, I got Error: 16, and was prompted to uninstall and reinstall again. I did, but same thing happened. Can anyone help?

This article may help :-
http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

Server Error 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied.

Hi,
I`d like to get your advice on Server Error 403 - Forbidden: Access is denied. I use to visit a webpage with no issues so far but now i getting this error each time i`m trying to get into. Any ideas in how to solve it? A step to step process will be highly appreciated.
Thanks.
PS, I`m using the latest safari 8.0.3 and OS X 10.10.2.

It's an error message from the web server, not from Safari. There's a slight chance that you might be able to clear it as follows.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.

Error message in TRFC 'An SQL error occurred when accessing a table'

Hi all,
Can any one tell what this below error message is about in while go into TRFC
'An SQL error occurred when accessing a table'.
and please tell me how to solve this problem.

Hi
Try to see what all tables are accessed by data source. and see if there is any lock on that..
If some other job is accessing that table - then there might be lock on that which is causing failure..
1) Try looking at ST22 dump also..
2) Try to do RSA3 in R/3 and if see if its is fetching any records or not..
Hoep it helps
--SA

SharePoint 2013 Update Workflow Manager problems after Service Pack 1

Hello guys,
I've installed the service pack 1 for SharePoint 2013 and then I tried to update the workflow manager, but I always get an error message that the workflow manager could not be updated!
Is the installing order wrong? should I first install the update for the worklfow manager and then the update for SharePoint 2013?
Best regards
Matthias

The error message see below for "Cumulative Update for Workflow Manager 1.0 (KB2799754)
"One of the custom actions failed. The installation cannot continue. See log for details!"
[06/06/14 09:48:44] Performing install.
[06/06/14 09:48:44] At least one of the product packages has been detected.
[06/06/14 09:48:44] preReqUpdateDisplayName is :
[06/06/14 09:48:44]
[06/06/14 09:48:44] Wizard mode on.
The following products will be enhanced:
Workflow Manager 1.0
Attempting to open cached Msi package for product code: {04A7199E-565D-4654-88A3-80A9A7BADDD9}
Successfully opened cached Msi package.
[06/06/14 09:48:48] Opening Service Control Manager...
[06/06/14 09:48:48] Operation succeeded.
[06/06/14 09:48:48] Copying files...
[06/06/14 09:48:48] Checking and creating target directory C:\ProgramData\Microsoft\E-Business Servers Updates\Updates\Uninstall2799754.
[06/06/14 09:48:48] Package Workflow Manager Client 1.0 is not installed. Skipping it.
[06/06/14 09:48:48] Package Workflow Manager Client 1.0 is not installed. Skipping it.
[06/06/14 09:48:48] Package Workflow Manager 1.0 is installed.
[06/06/14 09:48:49] Copying file AppServerV1-WorkflowManagerpatch30.msp ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file AppServerV1-WorkflowManagerpatch30.msp ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file TargetWFVersion.txt ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file UnifiedWFHotfixUpgrade.PS1 ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file Setup.xml ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file Setup.exe ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Package Workflow Manager 1.0 is installed.
[06/06/14 09:48:49] Package code is {04A7199E-565D-4654-88A3-80A9A7BADDD9}.
[06/06/14 09:48:49] Executing preinstall custom actions. 1 actions to execute.
[06/06/14 09:48:49] Starting process "C:\Windows\system32\..\sysnative\windowspowershell\v1.0\powershell.exe" -NoLogo -NonInteractive -NoProfile -WindowStyle Hidden -ExecutionPolicy RemoteSigned -File UnifiedWFHotfixUpgrade.PS1 -HotfixType "CS" -PackageType
"server" -opcode "PatchBefore" -platform "x64" ...
[06/06/14 09:48:50] Process exit code is -1.
get-itemproperty : Cannot find path 'HKLM:\Software\Microsoft\Service Bus\1.0'
because it does not exist.
At C:\ProgramData\Microsoft\E-Business Servers
Updates\Updates\Uninstall2799754\UnifiedWFHotfixUpgrade.PS1:971 char:21
+ $sbinstallpath = (get-itemproperty "HKLM:\Software\Microsoft\Service
Bus\1.0" ...
That's the log file
Best regards
Matthias

Error 205 when intalling application manager

How can I fix error 205 when adobe application manager is updating? I have wasted days trying to get photoshop but application manager tries to update even when I get the latest version manually. Then before it finishes initializing I get error 205 or 207. HELP!!!!

Hi DaFudgeWizzard,
Please follow the thread: Re: Installing Creative Cloud-Error 205 where this issue is already discussed.
Let us know for any further query.
Thanks,
Ratandeep Arora

ITunes for Windows: Error -9812 when accessing the iTunes Store

So here is the situation. When I try to access our iTunes U site from the public link it works great, when I go thru the link that has me authenticicate it works on macs but on PC's I get the error message "iTunes for Windows: Error -9812 when accessing the iTunes Store" it's happening all thru our campus with PC users. Any ideas?????

We're having similar connection issues, and the error log on our web server says something about a certificate error. I noted that last year on this date there were messages related to certificates. Is it possible they are updated every Dec 2, and we should count on some down time?
Katie

Error 403 when accessing workflow manager page after install

Similar Messages

Maybe you are looking for