Error 404 on editable page

I and a colleague have successfully loaded and edited your
demo (news_start.htm) example and are happy with the process.
However on setting up a live site, on accessing the editable area
with CTRL+E I keep getting the (custom) Error 404 page and cannot
proceed
The editable page is:
http://www.andrewleestrust.org/links.htm
and the (custom) error is generated by:
http://www.andrewleestrust.org/includes/ice/ide.html#page=links.htm
Any suggestions?

Hello ClandonMan,
It sounds like you're experiencing the same issue discussed
in the
Error
Editing Page topic...
Please take a look at the following Tech Note which discusses
the issue:
http://www.adobe.com/go/kb406749
Error: "The operation could not be performed because a
problem occurred while attempting to connect to the server" when
trying to edit a page using Adobe InContext Editing
Issue
After successful login in InContext Editing or when
navigating to a page in your website while the InContext Editing
toolbar is displayed, you receive the error "404 File or Directory
Not Found", or, depending on the server configuration, a custom
error page is displayed instead.
If you try to edit the page you will receive the following
error message: "The operation could not be performed because a
problem occurred while attempting to connect to the server. Please
check your Internet connection and try again. For more details,
please visit the InContext Editing Support Center".
Reason
InContext Editing requires the HEAD HTTP request method to be
enabled and functioning properly for a registered web site.
InContext Editing will not function properly if the HEAD HTTP
request method is disabled or if it does not function properly.
InContext Editing is using HEAD requests to check the
existence of the draft and published versions of the current page.
If those calls do not work as expected (the HEAD should return
status code 200/304 if the checked page exists, 404 otherwise) then
you will experience this behavior. In most cases the problem
appears on web servers running IIS 6 or 7 with PHP installed as
CGI, but this problem may occur with other server configurations as
well.
Solution
Contact your web hosting provider for assistance. This may
require changes in web server configuration.
Best regards,
Corey

Similar Messages

Hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer

When I open firefox or try to open any website I get the Error 404 message stating page not found, how do I correct this?

When opening firefox the error 404 immediatly comes up and NO websites (bookmarked or not) will come up, the error 404 message repeatedly comes up. I have deleted and re-installed different firefox versions and nothing has worked yet. What else can I try?

Do a malware check with some malware scan programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Please help (error going into edit page)

This is the error I am getting when I click on the edit link next to a page.
Error: The servlet produced the following error stack. java.lang.NullPointerException
     at oracle.webdb.page.DataProcessor31.sendRequest(Unknown Source)
     at oracle.webdb.page.DataProcessor31.generatePage(Unknown Source)
     at oracle.webdb.page.DataProcessor31.process(Unknown Source)
     at oracle.webdb.page.PageBuilder.process(Unknown Source)
     at oracle.webdb.page.ParallelServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
Any ideas?

Please contact Oracle Technical Support to resolve this problem.
Regards,
Jerry
PortalPM

Using the Adobe Reader Distribution Agreement link results in an error 404

I have a current Distribution Agreement for Reader etc but the link to download Reader results in an error 404 - Sorry, this page is not available.

Hi Ben,
Thanks for the response. I would have posted a link but as part of the distribution agreement it is not to be shared/posted.
I already have a current distribution agreement so the Volume distribution page does not help.
From the Enterprise Toolkit Home I accessed ftp.adobe.com/pub/adobe/ and was able to download from /pub/adobe/reader/win/11.x/11.0.10/en_US so thanks for the link.
Still does not fix the 404 error though on the distribution download link http://www.adobe.com/products/reader/runtime-distribution3.html#?????-???? (sanitised).

Error 404 while downloading icloud for pc

iphone
problem : i can't download icloud for pc #windows 8 # because of error 404 on dawnloading page <i have a msg #sorry we can't find your page#<

What OS are you running? That kind of message is usually generated in XP (service pack 2) due to DEP issues. (DEP = Data Execution Prevention). You may need to disable this feature.
Try:
Start > Control Panel > System > Advance > Performance Settings > Data Execution Prevention
Watch out though, I hear XP has various issues on iCloud. You may want to upgrade to a more recent OS.
Windows 7 is much better (don't bother with Vista).
In general, try Googling these kinds of error messages. You can normally get to the bottom of things quicker by searching on the Web, rather than faffing around with Mac's tech assistance, especially when it comes to PC-related problems. In my experience the kids at Apple's Express Lane know very little about anything, and Apple forum users with truly helpful info are few and far between.
Hope you fix your problem without too much trouble!

Error Editing page

The concept of InContext editing is phenomenal - If only I
could get it to work. I followed all the tutorials making sure to
note the DIV tags etc. Created my account - Set up FTP etc upon
signing on and when I press CTRL-E the page opens perfectly - THis
is where the problem starts, after signing in, I immediately get
the "Page Not Found" page from the parent site?
The InContext editing toolbar is there - The Current page
lists:
http://www.myiste.ca/subsite/sitemap.htm.
The address bar lists
http://www.mysite.ca/subsite/includes/ice/ide.html#page=sitemap.htm.
The Includes directory is on the root of
http://mysite.ca/subsite which
is the FTP root that was set up.
It should work but the page not found issue assumes that the
needed files are not there?
Can you offer any help?

Hello Steve,
Sorry to hear you are having problems. It sounds like the
issue you're experiencing is related to the HTTP HEAD request
method.
Take a look at the following Tech Note which discusses the
issue:
http://www.adobe.com/go/kb406749
Error: "The operation could not be performed because a
problem occurred while attempting to connect to the server" when
trying to edit a page using Adobe InContext Editing
Issue
After successful login in InContext Editing or when
navigating to a page in your website while the InContext Editing
toolbar is displayed, you receive the error "404 File or Directory
Not Found", or, depending on the server configuration, a custom
error page is displayed instead.
If you try to edit the page you will receive the following
error message: "The operation could not be performed because a
problem occurred while attempting to connect to the server. Please
check your Internet connection and try again. For more details,
please visit the InContext Editing Support Center".
Reason
InContext Editing requires the HEAD HTTP request method to be
enabled and functioning properly for a registered web site.
InContext Editing will not function properly if the HEAD HTTP
request method is disabled or if it does not function properly.
InContext Editing is using HEAD requests to check the
existence of the draft and published versions of the current page.
If those calls do not work as expected (the HEAD should return
status code 200/304 if the checked page exists, 404 otherwise) then
you will experience this behavior. In most cases the problem
appears on web servers running IIS 6 or 7 with PHP installed as
CGI, but this problem may occur with other server configurations as
well.
Solution
Contact your web hosting provider for assistance. This may
require changes in web server configuration.

Error 404 : page not found

hi all
i try to make like this demo:
http://download.oracle.com/otn_hosted_doc/jdeveloper/11/demos/overview/JDeveloperOverview.html
i do very thing like it except the change in JavaServiceFacade becaus I don't add any query, only I want insert some data in a table
the problem :
when i ry to run my faces the browser display ERROR 404 Page Can't Found
Any body can help me

Hi!
Try selecting some JSPX page in navigator and then click Run (or right click and then select Run). If you edited that facade bean it is big chance that you started Model project instead View.

First Page -Error 404--Not Found

Hi All,
I started learning ADF recently, I have created EO,VO,AM. My Jdev version is 11.1.1.3.0.
I tested with BC4J Tester everything is working fine.
But when I create JSF page and say Run I am getting the following error in the internet explorerer browser.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
This is the first time i am trying to run the page. could any one please let me know what are the setting i need to do,In Order to view my page.
Thanks
Kumar.

So first make sure the page is NOT under the web-inf folder (as John correctly stated) and then dragyour page onto the adfc-config.xml file. The the page gets hopefully registered.
If not drag a new view from the component palette onto the adfc-config.xml, give the view a name like 'TestMyApp' (don't let the name end in '.jspx'), create the page (double click on the icon) and put something onto the page.
Then you can change the view controllers project properties and select run/debug select the default run configuration and edit it. Under 'launch settings' select the adfc-config.xml as target, uncheck the 'attempt to Run Active...' and now select 'ADF Task Flow' in the left hand side tree. Now you select the newly created view TestMYApp and save your changes.
When you now run the app using the menu run (or debug) command, your app starts with the selected page 'TestMyApp'.
Timo

CTRL-E Loads ICE Toolbars and Standard Error 404 Page

I have a site registered with InContext. I have one editable region in index.php. When I click ctrl-e, ICE loads all toolbars, however instead of loading my index.php file, it displays the default standard Error 404 page within the ICE framework.
What information do I need to supply so that someone can help.
Thanks
Loyce

Okay. I use 1and1 as my hosting provider and it seems they use sedo domain parking as a revenue stream. So when a HTTP HEAD request is recieved it returns 200 OK even for pages that do not exist and then redirects to an ERROR 404 which contains advertisements. I don't really like this, but you can turn it off and see a standard, generic error page or use custom error pages, however this does not change how the server handles pages that do not exist.
Your solution to go to the InContext Editing Administration Panel and simply "Save" the site settings for this site. Will not work for me because when
ICE automatically checks if it can use HEAD requests on my server it finds that it can and never falls back to the alternate method of FTP.
If I had the option to force the use of FTP, all of my problems would vanish.
I have a request in with 1and1 to address this issue, however I see no reason for them to comply.
I can manually copy my index.php file to index_draft.php and everything will work again until the draft is published or deleted. For now, I plan to edit the ice.js file to check if the file exists and if not, copy the original.php to original_draft.php so that i can bypass this issue for now.
Is there a way to force the HTTP HEAD request to fail on my server?
Anyway, that is where I am so far on this..
Mr Popa, do you have any other thoughts on this so far?
Thanks for your time.

I want to add refworks grabit to my tool bar, when I try to install for firefox it won' t let me this is what I get: HTTP Error 404.3 - Not Found The page you a

this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
Error Summary
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Detailed Error Information
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://www.refworks.com:80/refgrabit/install.xpi
Physical Path E:\RefGrabIt\install.xpi
Logon Method Anonymous
Logon User Anonymous
Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
Most likely causes:
It is possible that a handler mapping is missing. By default, the static file handler processes all content.
The feature you are trying to use may not be installed.
The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
If ASP.NET is not installed.
Things you can try:
In system.webServer/handlers:
Ensure that the expected handler for the current page is mapped.
Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
Pay extra attention to typographical errors in the expected handler line.
Please verify that the feature you are trying to use is installed.
Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
Install ASP.NET.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
View more information »

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Error comes while using calender in Edit Page? BUG ???

Hi
I am using Jdeveloper 9.0.2. My project is a BC4J project. I have created some default Browse and Edit Form on a View Object. In the Edit page when I am entering date using the calender I am getting the following error:
" Error Message: No rows available for editing. "
But if I am giving date manually, everything is fine.
Please help me.
- Arvind

Repost

THE PAGE CANNOT BE FOUND - HTTP ERROR 404

I have just installed i-WEB 08 and have tried to publish a web page. I have saved, as prescribed and, to my knowledge, there are no passwords associated with the web page. When I try to access the page using SAFARI v3.0.4 the following error message appears:
"The page cannot be found. The page you are looking for might have been removed, had its name changed, or is temporarily unavailable. Please try the following: Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly. If you reached this page by clicking a link, contact the Web site administrator to alert them that the link is incorrectly formatted. Click the Back button to try another link.
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)"
I have checked address is as supplied and tried adding my user name to the www address without luck. Friends have also had same error message.
Can anyone supply an answer, please.

Did you publish to .Mac or another host?
Were there any warnings or errors during publishing?
What is the URL of the page you get the error on?
By the way, this is the "+Previous to+ iWeb '08" forum; the iWeb '08 Forum is here:
http://discussions.apple.com/forum.jspa?forumID=1193

Wwv_flow.accept, error 404 page not found

I am trying to install the OEHR Sample Objects for the Hosted Demo environment at apex.oracle.com site so I can do the Oracle Application Express 2 Day + Tutorial. I downloaded the zip file and got the .sql file extracted ok. The import works ok for the application, but hangs when trying to load the Supporting Objects. It eventually gives me that nasty old error 404 page not found when on MS windows 2000 and IEexplorer 6 ( and a similar result in xp using IEexplorer 7).
I cannot do much in the tutorial without the samples.
Any ideas, anyone else gotten stuck here? Thanks

Dimitri,
Many thanks for the reply.
The problem appears to be intermittent and can happen on, quite literally, any link or button. Anything which causes either a page submit or link through to another page is a likely candidate. And this isn't just whilst running the app - it's within the app design part, too. It seems to be an issue (possibly) with page delivery.
My gut feeling is that it seems to happen more after the DB has been up for a while. However, this may just be a matter of perception as I've also had it happen within minutes of a DB restart.
I'll have a play around with apex.oracle.com, but my suspicion is that the Oracle site works fine (this would be a far more visible error if it happened on apex.oracle.com, too).
One thought is that it might be an EPG config issue - it'd be interesting to check the config of an Oracle-supplied Apex area, if that were possible. Another thought is that it could be the network, though (typically) everything else on the network appears to be running fine...
Many thanks,
David

Ent 9 - Can't run mgmt console - admin.cwr gives Error 404: page not found

Post Author: Alan Weiner
CA Forum: Deployment
We just did a fresh install of Crystal Enterprise 9. When we try to run the Management console, we get an "Error 404: page not found"
http://wdcwfc80/crystal/enterprise9/admin/en/admin.cwr
Error 404: The page cannot be found

Post Author: Alan Weiner
CA Forum: Deployment
From the server (although, it uses a browser to connect)
colin mackenzie:
Hi Alan Weiner.
Do you get this message when you run this from the server? or just the workstation / client browser?

Error 404 on editable page

Similar Messages

Maybe you are looking for