Error 404 only on my Mac
Hello guys.
I'm experiencing an issue with a certain podcast. When I add it, it shows this message:
http://i162.photobucket.com/albums/t273/rique333/Screenshot2010-11-26at103207AM. png
Apparently, the error is the 404 (not found) one. But the problem is that I tested the same podcast on a Windows XP and a Windows 7 (Boot Camp Partition on my iMac) and both were just fine. The only problem is here on my Mac. So I assume iTunes is the problem, but I uninstalled and reinstalled it and the issue didn't go away.
Since Mac is my main OS, I need to get the podcast in it.
I'd like you guys to test it by yourselves and see if the problem also happens with you. The feed is: http://www.the-horror.com/rss/rpd_dispatch.xml
iTunes Store link: http://itunes.apple.com/us/podcast/rpd-dispatch/id301416484
What should I do?
Thank you
Well, I guess you misunderstood because I'm not the owner of the podcast and neither the feed.
That's different, of course. No, there's nothing you can do - only the owner can make these amendations. You can still listen to the episodes, just not in iTunes. If you click on the link to the feed:
http://www.the-horror.com/rss/rpd_dispatch.xml
it will open in whatever you have set as your default rss reader - this may well be Safari - and then you can click on the links to the mp3 files and listen to them that way.
It may be that the Windows version of iTunes can handle the spaces in the way a browser does - obviously, though it looks the same, it's a different application under the hood and may be programmed slightly differently.
Similar Messages
-
Choosing any of several dozen bookmarks, Firefox will show a screen reporting Error 404 and display only part of the complete URL (whatever follows the slant mark beyond the domain name). When going to a new site, such as provided by a Google search, the initial page may show up but clicking on links within that page again brings up the 404 error. My only solution has been to uninstall whatever new version of Firefox has been automatically downloaded and then re-install version 3.6.0, which works.
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Error_loading_websites -
Form with only 1 text field + ENTER: Error 404
I have several JSP pages with forms to enter/edit data. As long as I use the mouse to click the submit buttons, I get no errors. If the form has more than 1 text field to enter, i can also edit one of these text fields and press the ENTER/RETURN key which has the same effect as the submit button clicked with the mouse. But if a form just has 1 text field, I get the following error when I press the ENTER/RETURN key (instead of clikcing the submit button with the mouse):
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
This is the same case on all JSP pages that only has 1 text field: they work when using the mouse by pressing the submit button but fail when using the ENTER/RETURN key.
Is this a known bug? Is there a workaround for this?I believe that text inputs can have their own action
attribute, so providing the same value there as in
the form may help (though by default it should defer
to the form's action).
So try something like:
<form action="x.jsp">
<input type="text" name="..." action="x.jsp"/>
</form>
That doesn't help. The addresss bar is also always the same as the jsp pages are displayed in a html frame. -
Hi!
When trying to download Acrobat Pro XI Student I only get this " http error: 404/support/downloads/dlm/main.jsp " warning. This happens with Akamai and the altervative method too. I've paid it, is this because Adobe hasn't progressed my payment yet?
Kind regards, xpooler.Luckily the problem seems to have vanished. I am not sure what happened but I think the reason was one of the browser extensions, thanks for the advice anyway!
-
Trying to download Photoshop CS3 for Mac but keep getting error message (HTTP ERROR: 404 /support/downloads/dlm/main.jsp, RequestURI=/support/downloads/dlm/main.jsp)
Jessicawaters are you trying to download from Download CS3 products? If so then please try a different web browser.
-
QuickTime error -50, (only on Mac Pro workstation)
Does anyone know what QuickTime error -50 means?
I'm getting this constantly on my Mac Pro 3.0Ghz workstation, (in Batch Monitor.) At the end of encoding about 3 hours of footage into iPod format, Batch Monitor begins to error on about 3/4 of the encodes left to do, beyond the 3 hours of footage that have already been processed.
I was told, (by Apple support) that it may be something to do with the hard drives, but they all check out just fine. I also have a G5/quad running the exact same version of compressor and there are no errors during processing, (in batch monitor) no matter how much footage is processed.
Here's my hard drive configuration on the Mac Pro as well as the G5/quad.
Boot drive, (running all of my Apps) internal drive on Mac Pro.
Xserve RAID 10TB, (used for source movie storage, in 10bit uncompressed format, AJA I/o codec.)
2nd drive, (used for storage of reference movies stored on RAID) internal drive on Mac Pro.
3rd drive, (used for storing final encoded movies) internal drive on Mac Pro.\
All software and OS X are new installs, (from original disks.) The drives have been completely erased, formated and new installs of all software, using nothing from the original installs on the Mac Pro, as well as updated to all current versions of software and still the problem persists only on the Mac Pro 3.0Ghz, (4 core) workstation.
Any guidance on the source of the QuickTime -50 error would be appreciated.Thanks for the reply.
I tried a Google search, but to no avail, (no mention of QT error -50.)
I also looked at the error codes list you provided, but it would appear that those codes are related to OS X operation, (unrelated to QuickTime errors) but thanks for trying!
This is a very strange issue that has plagued me for as long as I have had this Mac Pro. I can take those files that failed with QT error -50, run them again and as long as there part of the first 3 hours of footage that is encoded on the Mac Pro, they will encode just fine. It is after that, that the wheels fall off and the QT -50 errors begin. Very frustrating as you can imagine.
I'm forced to run no more that three hours of footage at a time, limiting over the weekend encodes, on large batches of footage that needs to be transcoded into iPod format.
But again, thanks for trying, it is appreciated! -
I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp
Make sure you have cookies enabled for your browser. Try using a different browser if the problem continues.
-
Error 404 causes Labview 2010 to crash but only occasionally
Hello,
I am requesting help to solve a problem with LabVIEW 2010 crashing. I am new to this company and the last Labview developer left without providing
background on this problem. Labview crashes after running project VIs. Labview closes without warning or error messages. The project acquires data from pressure transducers, dP transducers, thermocouples, IEPE, load cells, and voltages through NI real-time system and has digital I/O. NI hardware includes PXI-1050 with modules 6221, 6280, 6224, 6220 and NI PXI-1052, SCXI-1306, SCXI-1112, SCXI-1520, and SCXI-1102. I've reviewed the labview program and the software relies heavily on shared variables, references, and local variables but I cannot find anything that stands out as a problem in the software .
The program crashed again today after running for only 1/2 hour and was not recording data. No error message occurred before the crash and the only error after restarting LabVIEW was the standard message that LabVIEW did not close properly. I went to the Event Viewer and at the time of the crash I received the following information:
Event ID = 3299
Source = LabVIEW
Log = Application
Level = Error
LabVIEW Information: Error 404 "Not found" for "/national instruments/ real-time execution trace toolkit/ 2.0/ trace receiveport", file "Crogram files (x86)/ national instruments /shared/ ni webserver/ www/ national instruments/ real-time execution trace toolkit/ 2.0/ trace receiveport": Can't access URL
According to Event Viewer, this error 3299 occurred 15 times in the last 3 days. LabVIEW crashed today at 10:19 am at the same time this error 3299 occurred but LabVIEW did not crash the other times this error occurred in the last 3 days. I believe this error is related to the crash but does not usually cause the crash. It appears to me from reading the error message that the error is the result of occasional lose of communication with the real-time system (Can't find URL). Any suggestions how to resolve this would be greatly appreciated.
Bill1. Have you had this code working before on this or another machine?
2. Which operating system and version of LabVIEW are you running? (This can be found in Control Panel >> All Control Panel Items >> System)
3. Which National Instruments Drivers are you using? (This can be found in the measurement an automation explorer under the software tab [a screenshot would be good])
I would look into removing afsetup.exe which is a data collection tool provided by Microsoft which could a) not be installed correctly and/or b) trying to pull data from LabVIEW. I think this may help you out, as even though your programs aren't explicitly calling it, the service is running in the background.
Secondly, I would look into stopping the NI Web Server application that could be polling a web page that's not needed. -
search engines and other websites are not found in my server although they were about a week ago. Now Error 404 pops up every time I try to access the websites or search engines. I am not entirely sure when it started exactly, but if there is a way to fix it, I would be very glad to hear it.
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database.<br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
See also http://kb.mozillazine.org/Error_loading_websites -
i need cs3 photoshop...
HTTP ERROR: 404 /support/downloads/dlm/main.jsp
RequestURI=/support/downloads/dlm/main.jsphttp://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html
Gene -
Hello,
when I am trying to run my webpage I am geting the following
error,please help me with this.
Server Error in Application "Default Web Site"
HTTP Error 404.0 - Not Found
Description: The resource you are looking for has been
removed, had its name changed, or is temporarily unavailable.
Error Code: 0x80070002
Notification: MapRequestHandler
Module: IIS Web Core
Requested URL:
http://localhost:80/add_to_database.asp
Physical Path: C:\inetpub\wwwroot\add_to_database.asp
Logon User: Anonymous
Logon Method: Anonymous
Handler: ASPClassic
Most likely causes:
The directory or file specified does not exist on the Web
server.
The URL contains a typographical error.
A custom filter or module, such as URLScan, restricts access
to the file.
Thanks,You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Error 404 -- Not Found, when a Servlet is invoked from browser
Obviously, I have not been able to configure my WebLogic Server 5.1.0 to run
even the simplest servlet.
I painstakenly went through all the steps that are listed in the WebLogic
Server 5.1.0 documentation on the Web to enable servlets, but obviously, I
have missed a step somewhere.
I have modified the weblogic.properties file as per all the instrustions,
but the server simply won't recognize any servlets, not even the SqlServlet
that came with the server as an example.
It would require more than 1 exchange of posts to resolve it for me, and I
am wondering if one of you is willing to work with me on this until I have
managed to configure the server to make a servlet work on it.
The server does function as a Web server as I can run the index.html
document by entering the URL: http://localhost:7001/index.html
I am pasting the contents of weblogic.properties file below to get the
person who is willing to help me started.
The machine I have is a Pentium III with Windows 2000 Professional on it.
It's a home machine and the WebLogic server is the freely downloadable
version. I am using it to prepare for a potential contract work.
I have managed to modify setEnv.cmd file and have managed to compile the
SqlServlet.java, which is an example servlet. Neither this particular
servlet nor a HelloWorld type of very basic servlet I have written are
recognized by the server.
As you can see from my weblogic.properties file (pasted at the end of this
post), the SqlServlet has been registered. I have also uncommented the lines
to allow for the following type of URL:
http://localhost:7001/servlet/myServlet
Thanks!
Anjum Jaleel
CONTENTS OF MY weblogic.properties file
# THE WEBLOGIC PROPERTIES FILE
# This file, which conforms to the java.util.Properties file
# definition, configures your WebLogic products. You cannot run
# WebLogic Server without setting required configuration properties in this
# file. Required properties are marked and appear first in the file.
# Details on each entry and important information about configuration
# and security are documented on our website. Please go to:
# http://www.weblogic.com/docs51/admindocs/properties.html
# for full instructions on how to edit this file.
# You do not need to include properties in this file unless you want to
# change the default, embedded property. Some properties on the
# AdminProps page are not listed here because the default property
# is being used. You can change the default by adding the property and
# its value to this file.
# You cannot set weblogic.system.home in this file, since the WebLogic
Server
# must know where home is in order to retrieve this file. You can
# change WebLogic home on the command line when you start the
# WebLogic Server.
# CLUSTER USERS: Note that the (shared) per-cluster properties file should
# contain most all of the properties in this file. The only properties
# that potentially belong in a per-server properties file for a server
# running in a cluster are the registration (startup class) of pinned
# RMI objects, and a few tuning properties that may be different for
# servers in the cluster, depending upon hardware and memory. If you use
# a per-server properties file, please REMOVE all properties except those
# that are specifically required in the per-server properties file. You
# can find specific notes on clusters by searching through this file for
# "CLUSTER USERS".
# The way this file is organized:
# Core properties (includes REQUIRED and RECOMMENDED)
# Core system properties
# Core security-related properties
# Core security-related properties for SSL
# Core HTTPD administrative properties
# Optional properties
# Administrator properties
# System properties
# System startup files
# System shutdown files
# Security-related properties for Workspaces
# Jolt for WebLogic properties
# WebLogic Enterprise Connectivity properties
# WebLogic File properties
# WebLogic JMS demo properties
# WebLogic RMI demo properties
# WebLogic EJB demo properties
# WebLogic XML demo properties
# WebLogic ZAC demo properties
# HTTPD administrative properties
# WebLogic JDBC driver properties
# WebLogic JDBC connection pool management
# WebLogic demo connection pool
# WebLogic HTTP Servlet properties
# Proxy servlet registration
# Classpath servlet registration
# File servlet registration
# ServerSideInclude servlet registration
# PageCompileServlet (used by JHTML)
# JSPServlet (used by JSP)
# ServletServlet registration
# Servlet reload properties
# Servlet ACLs
# WebLogic JSP properties
# WebLogic JHTML properties
# WebLogic RMI over IIOP properties
# User-written and demo servlet registrations
# CORE PROPERTIES
# You should set these before you start the WebLogic Server the first time.
# If you need more instructions on individual properties in this
# section, check the same section in the Optional Properties, where
# we've left the long explanations. Or, better yet, go to our
# website and read all about properties, at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# CORE SYSTEM PROPERTIES
# TCP/IP port number at which the WebLogic Server listens for connections
weblogic.system.listenPort=7001
# CORE SECURITY-RELATED PROPERTIES
# Read important information about security at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# REQUIRED: The system password MUST be set in order to start the
# WebLogic Server. This password is case-sensitive, at least 8 characters.
# The username for the privileged user is ALWAYS "system".
# This username and password also includes httpd access (see
# HTTPD properties below).
weblogic.password.system=lovkako1
# RECOMMEND Set to 'everyone' if HTTPD is enabled
weblogic.allow.execute.weblogic.servlet=everyone
# Set individual ACLs to restrict access to HTTP-related resources,
# such as the Administration servlets.
# To make your own servlets generally available, follow this
# pattern (provide a weblogic.allow.execute) for your packages and
# set ACLs as appropriate.
# CORE SECURITY-RELATED PROPERTIES FOR SSL
# Read important information about SSL at:
# http://www.weblogic.com/docs51/classdocs/API_secure.html
# Enable SSL
# (default if property not defined is false)
weblogic.security.ssl.enable=true
# SSL listen port
weblogic.system.SSLListenPort=7002
# Servlets for SSL
# Authentication servlet for creating tokens for applets
weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticationS
ervlet
# Limits number of unclaimed stored tokens
weblogic.security.certificateCacheSize=3
# Capture CA root of client servlet
weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
# Certificates for SSL
# Name of acceptable CA roots
# For client authentication change value to a valid .pem file
#weblogic.security.clientRootCA=SecureServerCA.pem
# Server certificates for SSL
weblogic.security.certificate.server=democert.pem
weblogic.security.key.server=demokey.pem
weblogic.security.certificate.authority=ca.pem
# registration for certificate generator servlet
weblogic.httpd.register.Certificate=utils.certificate
weblogic.allow.execute.weblogic.servlet.Certificate=system
# CORE HTTPD ADMINISTRATIVE PROPERTIES
# True permits the HTTPD to run (default)
# Uncomment this property to disable HTTPD
weblogic.httpd.enable=true
# If authentication is required, add username/password for each user
# who will be included in an ACL, as in this commented-out example:
#weblogic.password.peter=#8gjsL4*
# OPTIONAL PROPERTIES
# These properties affect the behavior of the WebLogic Server.
# You only need to set these properties if you want
# to change the default setting, which is the property shown.
# ADMINISTRATOR PROPERTIES
# Administrator properties are optional information properties,
# particularly useful for clusters.
#weblogic.administrator.location=3355 California Drive, West Hampshire, CA
94104
#weblogic.administrator.name=Joe Administrator
#weblogic.administrator.phone=1 415 555 1234
# SYSTEM PROPERTIES
# System properties in this section are set to system defaults
# Performance pack. The shared library must be accessible from your
# PATH (NT) or from your shared library path (UNIX; the name of the
# variable varies: LD_LIBRARY_PATH, SHLIB_PATH, etc.)
weblogic.system.nativeIO.enable=true
# Outputs logging information to the console as well as to the log file
weblogic.system.enableConsole=true
# Sets the directory or URL for the WebLogic Admin help pages
# The help pages are shipped in the "docs/adminhelp" directory, in the
# default document root in public_html
weblogic.system.helpPageURL=g:/weblogic/myserver/public_html/docs51/adminhel
p/
# If you prefer to access the most recent help pages, you can do so online
# by commenting out the previous property and uncommenting this one:
#weblogic.system.helpPageURL=http://www.weblogic.com/docs51/adminhelp/
# Properties for tuning the server's performance
# Number of WebLogic Server execute threads.
weblogic.system.executeThreadCount=15
# Other optional system properties
# Limits size of weblogic.log (in K) and versions old log
weblogic.system.maxLogFileSize=1024
# Adjust minimum length of password
weblogic.system.minPasswordLen=8
# UNIX only: If running on port 80 on UNIX, enable the setUID program
#weblogic.system.enableSetUID=false
# UNIX only: Unprivileged user to setUID to after starting up
# WebLogic Server on port 80
#weblogic.system.nonPrivUser=nobody
# CLUSTER-SPECIFIC PROPERTIES
# Cluster-specific properties in this section are set to system defaults.
# CLUSTER USERS: Note that ALL Cluster-specific properties should be set
# in the per-cluster properties file ONLY.
# Time-to-live (number of hops) for the cluster's multicast messages
# (default 1, range 1-255).
#weblogic.cluster.multicastTTL=1
# Sets the load-balancing algorithm to be used between
# replicated services if none is specified. If not specified,
# round-robin is used.
#weblogic.cluster.defaultLoadAlgorithm=round-robin
# SERVER-SPECIFIC CLUSTER PROPERTIES
# Cluster-related properties in this section are set to system defaults.
# CLUSTER USERS: Note that these server-specific cluster-related properties
# should be set in the per-server properties file ONLY.
# Sets the weight of the individual server for the weight-based
load-balancing.
# Range is 0 - 100.
# Larger numbers increase the amount of traffic routed to this server.
#weblogic.system.weight=100
# SYSTEM STARTUP FILES - Examples
# CLUSTER USERS: Note that ONLY startup registrations for pinned RMI
# objects should be registered in the per-server properties file.
# All other startup classes should be registered in the per-cluster
# properties file.
# For more info on writing and using startup file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a startup class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.startupClass.[virtual_name]=[full_pathname]
# Add arguments for the startup class
#weblogic.system.startupArgs.[virtual_name]={argname]=[argvalue]
# This example shows the entry for examples/t3client/StartupQuery.java
#weblogic.system.startupClass.doquery=examples.t3client.StartupQuery
#weblogic.system.startupArgs.doquery=\
# query=select * from emp,\
# db=jdbc:weblogic:pool:demoPool
# SYSTEM SHUTDOWN FILES - Examples
# For more info on writing and using shutdown file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a shutdown class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.shutdownClass.[virtual_name]=[full_pathname]
# Add arguments for the shutdown class
#weblogic.system.shutdownArgs.[virtualName]={argname]=[argvalue]
# This example shows the entry for examples/t3client/ShutdownTest.java
#weblogic.system.shutdownClass.ShutdownTest=examples.t3client.ShutdownTest
#weblogic.system.shutdownArgs.ShutdownTest=\
# outfile=c:/temp/shutdown.log
# SECURITY-RELATED PROPERTIES FOR WORKSPACES
# For backward compatibility, the following entries disable Access
# Control on Workspaces
weblogic.allow.read.weblogic.workspace=everyone
weblogic.allow.write.weblogic.workspace=everyone
# JOLT FOR WEBLOGIC PROPERTIES
# These properties configure a BEA Jolt connection pool for use with
# the simpapp and bankapp examples, and register a servlet for use with
# with the simpapp example. The default server address provided here
# points to a public TUXEDO server that is hosted by BEA for use with
# this example.
# Servlet registration for simpapp example:
#weblogic.httpd.register.simpapp=examples.jolt.servlet.simpapp.SimpAppServle
t
# Pool creation and cleanup
# note this example is set up to work with the public
# demo TUXEDO server available from BEA's website:
#weblogic.system.startupClass.demojoltpoolStart=\
# bea.jolt.pool.servlet.weblogic.PoolManagerStartUp
#weblogic.system.startupArgs.demojoltpoolStart=\
# poolname=demojoltpool,\
# appaddrlist=//beademo1.beasys.com:8000,\
# failoverlist=//beademo1.beasys.com:8000,\
# minpoolsize=1,\
# maxpoolsize=3
#weblogic.system.shutdownClass.demojoltpoolStop=\
# bea.jolt.pool.servlet.weblogic.PoolManagerShutDown
#weblogic.system.shutdownArgs.demojoltpoolStop=\
# poolname=demojoltpool
# WEBLOGIC ENTERPRISE CONNECTIVITY PROPERTIES
# The registrations enable a BEA IIOP connection pool and
# register servlets for use with the simpapp and university examples.
# Configure for your environment and uncomment to use.
# Uncommenting these properties requires WebLogic Enterprise Connectivity
# and an operating WebLogic Enterprise Server.
# Servlet registration for simpapp servlet example
#weblogic.httpd.register.SimpappServlet=\
# examples.wlec.servlets.simpapp.SimpappServlet
#weblogic.allow.execute.weblogic.servlet.SimpappServlet=everyone
# Servlet registration for simpapp EJB example
# (You'll need to add the wlec_ejb_simpapp.jar to the
# weblogic.ejb.deploy property in this file.)
#weblogic.httpd.register.ejbSimpappServlet=\
# examples.wlec.ejb.simpapp.ejbSimpappServlet
#weblogic.allow.execute.weblogic.servlet.ejbSimpappServlet=everyone
# Pool creation and cleanup for the simpapp example
#weblogic.CORBA.connectionPool.simplepool=\
# appaddrlist=//wlehost:2468,\
# failoverlist=//wlehost:2468,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# domainname=simpapp
# Servlet registration for university Servlet example:
#weblogic.httpd.register.UniversityServlet=\
# examples.wlec.servlets.university.UniversityServlet
#weblogic.allow.execute.weblogic.servlet.UniversityServlet=everyone
# Pool creation and cleanup for the University example:
#weblogic.CORBA.connectionPool.Univpool=\
# appaddrlist=//wlehost:2498,\
# failoverlist=//wlehost:2498,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# apppassword=wlepassword,\
# domainname=university
# WEBLOGIC FILE PROPERTIES
# Maps a volume name to a path, for client file read/write
#weblogic.io.fileSystem.[volumeName]=[fullPathName]
# WEBLOGIC JMS DEMO PROPERTIES
# CLUSTER USERS: Note that ALL JMS deployment should be done in the
# per-cluster properties file ONLY.
# You set up a JDBC connection pool if you want persistent messages
# (including durable subscriptions). To use JMS and EJBs in the same
# transaction, both must use the same JDBC connection pool. Uncomment
# the following property to use the default JDBC connection pool
# 'demo', which is defined in the Demo connection pool section of this file.
#weblogic.jms.connectionPool=demoPool
# The JMS Webshare example demonstrates how the ClientID for a
# durable subscriber is configured in the connection factory:
#weblogic.jms.topic.webshareTopic=jms.topic.webshareTopic
#weblogic.jms.connectionFactoryName.webshare=jms.connection.webshareFactory
#weblogic.jms.connectionFactoryArgs.webshare=ClientID=webshareUser
#weblogic.httpd.register.webshare=examples.jms.webshare.WebshareServlet
# The JMS trader example shows how to use JMS with an EJB. In addition
# to uncommenting the following properties, you must also set up and
# deploy the EJB example examples.ejb.basic.statelessSession.Trader in
# ejb_basic_statelessSession.jar to try out this JMS example:
#weblogic.jms.topic.exampleTopic=javax.jms.exampleTopic
#weblogic.jms.connectionFactoryName.trader=jms.connection.traderFactory
#weblogic.jms.connectionFactoryArgs.trader=ClientID=traderReceive
#weblogic.httpd.register.jmstrader=examples.jms.trader.TraderServlet
# Registers the underlying servlet
#weblogic.httpd.register.jmssender=examples.jms.sender.SenderServlet
# These properties are used with the ServerReceive JMS example,
# which demonstrates how to establish a JMS message consumer
# in a startup class:
#weblogic.system.startupClass.serverReceive=\
# examples.jms.startup.ServerReceive
#weblogic.system.startupArgs.serverReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
# These properties are used with the PoolReceive JMS example,
# which demonstrates how to establish a pool of JMS message consumers
# in a startup class:
#weblogic.system.startupClass.poolReceive=\
# examples.jms.startup.PoolReceive
#weblogic.system.startupArgs.poolReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
#weblogic.allow.create.weblogic.jms.ServerSessionPool=everyone
# WEBLOGIC RMI DEMO PROPERTIES
# CLUSTER USERS: Note that pinned RMI objects should be registered
# in the per-server properties file ONLY. All other RMI startup
# classes should be registered in the per-cluster properties file.
# Remote classes registered at startup after the pattern:
#weblogic.system.startupClass.[virtualName]=[fullPackageName]
# These examples can be compiled to see RMI in action. Uncomment to use:
#weblogic.system.startupClass.hello=examples.rmi.hello.HelloImpl
#weblogic.system.startupClass.multihello=examples.rmi.multihello.HelloImpl
#weblogic.system.startupClass.stock=examples.rmi.stock.StockServer
# WEBLOGIC EJB DEMO PROPERTIES
# CLUSTER USERS: Note that ALL EJB deployment should be done in the
# per-cluster properties file ONLY.
# See WebLogic Demo Connection Pool below for a connection pool
# to use with these examples.
# Deploys EJBeans. Uncomment the appropriate lines below and
# modify DBMS-related info and paths to match your particular installation:
#weblogic.ejb.deploy=\
# g:/weblogic/myserver/ejb_basic_beanManaged.jar, \
# g:/weblogic/myserver/ejb_basic_containerManaged.jar, \
# g:/weblogic/myserver/ejb_basic_statefulSession.jar, \
# g:/weblogic/myserver/ejb_basic_statelessSession.jar, \
# g:/weblogic/myserver/ejb_extensions_finderEnumeration.jar, \
# g:/weblogic/myserver/ejb_extensions_readMostly.jar, \
# g:/weblogic/myserver/ejb_subclass.jar, \
# g:/weblogic/myserver/jolt_ejb_bankapp.jar
# Servlet used by the EJB basic beanManaged example
# Uncomment to use:
#weblogic.httpd.register.beanManaged=\
# examples.ejb.basic.beanManaged.Servlet
# Add a list of users (set the password with
weblogic.password.[username]=XXX)
# to set an ACL for this servlet:
#weblogic.allow.execute.weblogic.servlet.beanManaged=user1,user2,etc
#weblogic.password.user1=user1Password
#weblogic.password.user2=user2Password
# WEBLOGIC XML DEMO PROPERTIES
# These properties are required to run the XML examples.
# Uncomment to use.
# CLUSTER USERS: Note that ALL servlets should be set up
# in the per-cluster properties file ONLY.
#weblogic.httpd.register.StockServlet=examples.xml.http.StockServlet
# BizTalk example properties
#weblogic.jms.queue.tradeIncoming=biztalk.jms.tradeIncoming
#weblogic.jms.queue.tradeError=biztalk.jms.tradeError
#weblogic.httpd.register.BizTalkServer=examples.xml.biztalk.BizHttpProtocolA
dapter
#weblogic.httpd.initArgs.BizTalkServer=bizQueue=biztalk.jms.tradeIncoming
# WEBLOGIC ZAC DEMO PROPERTIES
# These registrations enable the ZAC Publish Wizard.
weblogic.zac.enable=true
# Set the publish root for a WebLogic Server. Edit and
# uncomment to use.
#weblogic.zac.publishRoot=g:/weblogic/zac
# Set an ACL for each package you publish. The [name] is
# the "Package name" you assign in the ZAC Publish Wizard.
# Publish a package, edit this property, and uncomment to use.
#weblogic.allow.read.weblogic.zac.[name]=[user list]
#weblogic.allow.write.weblogic.zac.[name]=system
# HTTPD ADMINISTRATIVE PROPERTIES
# Enables logging of HTTPD info in common log format and
# sets the log file name (default is "access.log" in "myserver")
weblogic.httpd.enableLogFile=true
weblogic.httpd.logFileName=access.log
# Tracks HTTPD requests with events delivered to WEBLOGIC.LOG.HTTPD
weblogic.httpd.enableEvents=false
# Enables HTTP sessions
weblogic.httpd.session.enable=true
# Sets an optional cookie name. The default name is "WebLogicSession".
# Prior to version 4.0, the default was "TengahSession". To make
# this backward compatible with cookies generated from previous
# installations, you should set this property to "TengahSession".
# Uncomment this line and set this to any string of your choice,
# or comment out this property to use the default.
#weblogic.httpd.session.cookie.name=WebLogicSession
# MIME types
weblogic.httpd.mimeType.text/html=html,htm
weblogic.httpd.mimeType.image/gif=gif
weblogic.httpd.mimeType.image/jpeg=jpeg,jpg
weblogic.httpd.mimeType.application/pdf=pdf
weblogic.httpd.mimeType.application/zip=zip
weblogic.httpd.mimeType.application/x-java-vm=class
weblogic.httpd.mimeType.application/x-java-archive=jar
weblogic.httpd.mimeType.application/x-java-serialized-object=ser
weblogic.httpd.mimeType.application/octet-stream=exe
weblogic.httpd.mimeType.text/vnd.wap.wml=wml
weblogic.httpd.mimeType.text/vnd.wap.wmlscript=wmls
weblogic.httpd.mimeType.application/vnd.wap.wmlc=wmlc
weblogic.httpd.mimeType.application/vnd.wap.wmlscriptc=wmlsc
weblogic.httpd.mimeType.image/vnd.wap.wbmp=wbmp
# In seconds, the keep-alive for HTTP and HTTPS requests
weblogic.httpd.http.keepAliveSecs=60
weblogic.httpd.https.keepAliveSecs=120
# WEBLOGIC JDBC DRIVER PROPERTIES
# Enables JDBC driver logging and sets the file name for the log
# The weblogic.jdbc.logFile is placed in the per-server
# directory (default is "myserver")
weblogic.jdbc.enableLogFile=false
weblogic.jdbc.logFileName=jdbc.log
# WEBLOGIC JDBC CONNECTION POOL MANAGEMENT
# CLUSTER USERS: Note that ALL JDBC connection pools should be set up
# in the per-cluster properties file ONLY.
# For creating JDBC connection pools. This example shows a connection
# pool called "oraclePool" that allows 3 T3Users "guest," "joe," and "jill"
# to use 4 JDBC connections (with a potential for up to 10 connections,
# incremented by two at a time, with a delay of 1 second between each
# attempt to connect to the database), to an Oracle database server called
# "DEMO." If more than 4 connections are opened, after 15 minutes, unused
# connections are dropped from the pool until only 4 connections remain
open.
# Every 10 minutes, any unused connections in the pool are tested and
# refreshed if they are not viable.
#weblogic.jdbc.connectionPool.oraclePool=\
# url=jdbc:weblogic:oracle,\
# driver=weblogic.jdbc.oci.Driver,\
# loginDelaySecs=1,\
# initialCapacity=4,\
# maxCapacity=10,\
# capacityIncrement=2,\
# allowShrinking=true,\
# shrinkPeriodMins=15,\
# refreshMinutes=10,\
# testTable=dual,\
# props=user=SCOTT;password=tiger;server=DEMO
# Get more details on each argument for this property in the
# Administrators Guide on setting properties at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# Set up ACLs for this connection pool with the following:
#weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=\
# guest,joe,jill
#weblogic.allow.reset.weblogic.jdbc.connectionPool.oraclePool=\
# joe,jill
#weblogic.allow.shrink.weblogic.jdbc.connectionPool.oraclePool=\Problem Resolved!
I found out that I had 'http' instead of 'httpd' in the statement where I
registered my servlet, SqlServlet.
Now, I am having difficulty with hot deployment. The server is returning
error 404.
-
DADs on WLS 11g (version 10.3.6.0) do not work (Error 404--Not Found)
Actually we use Application Server 10g (version 10.1.2.3.0) for different Forms 10g Applications (roundabout 1000 Forms) and want to change to Forms 11g and Weblogic Server 11g (version 10.3.6.0). A Test-Application on the Weblogic Server works fine, but DAD’s do not work at all.
In Enterprise Manager 10g i can configure DADs within the GUI of the Enterprise Manager, where i can see, if a connection could be established or not.
In Enterprise Manager 11g Fusion Middleware Control this doesn't seem to exist anymore, so i tried to configure the DADs manually, but something has to be wrong or missing, because there is no connection to the database and the following error appears:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I added several DAD’s to /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql/dads.conf like this:
<Location /pls/jd-download-dev>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername w_web_user_download
PlsqlDatabasePassword @BWKChfgPacV6yQL40lIKZqXUUA9wC4cmAw==
PlsqlDatabaseConnectString jddev TNSFormat
PlsqlNLSLanguage German_Germany.WE8ISO8859P1
PlsqlAuthenticationMode Basic
PlsqlDefaultPage w_anwendung.p_web_show_document
PlsqlAlwaysDescribeProcedure Off
PlsqlErrorStyle DebugStyle
</Location>
The passwords were obfuscated with dadTool.pl and the http-Server restarted with /opt/oracle/product/Middleware/asinst_1/bin/opmnctl restartproc process-type=OHS
The files /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql.cache.conf and /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/moduleconf.plsql.conf were left unchanged.
Our Test-Application generates the following link
'http://172.106.2.7:9001/pls/jddevdev/B_ARCHIVE.P_ARCHIVE_VIEW?docfid=200'
that seems to be ok, because when i replace IP and port with our old IAS it works fine, but the WebLogic Server generates the above mentioned error.
To get some more information i searched an error_log in /opt/oracle/product/Middleware/asinst_1/diagnostics/logs/OHS/ohs1 but there isn’t any.
I used the following Documentation for configuring the DADs which is for HTTP Server 11g Release 1 (version 11.1.1), because I could not find one for version 10.3.6.0:
http://docs.oracle.com/cd/E23943_01/web.1111/e10144/under_mods.htm#i1055269
So probably there are differences between configuring version 10.3.6.0 and version 11.1.1 and so something is wrong configured or missing...
Thank you in advance for your help
UdoHi Raj,
it is a Sparc Solaris 10
and yes that's my enviorment.
After some more tests it's seems it's not a real bug but no realy nice working solution.
Eclipse uses for all instances the same secure storage, where OEPE also saves the password.
And if I look right the pasword was saved without the user context, so if you use an other user he takes the same password from the old user.
and I doesn't know how do OEPE check the connection in reality or only reply the last failed login message.
After deleting the complete secure storage and test it again with the juno version it works well. -
EPM 11.1.2.3 ,Error 404 - Not Found
Hi All,
I am getting the following error after my installation and configuration of EPM 11.1.2.3 and when I try to access the Workspace URL.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol --
HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the
Request-URI. No indication is given of whether the condition is temporary or
permanent.
If the server does not wish to make this information available to the client,
the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code
SHOULD be used if the server knows, through some internally configurable
mechanism, that an old resource is permanently unavailable and has no forwarding
address.
I installed 11.1.2.3 in windows 7 ultimate OS and 64 bit and using sql server 2005 Database and configured Essbase,planning, hfm, arm, fcm,fdm ,hpcm, , everything was configured successfully but when I open the workspace URL it is throwing "Error 404 not found"
I tried accessing http://machinename:7001/console (I replaced machinename with my machinename)
even here I am getting the same error, but I checked the database and it has the table hss_component_types and it is populated with the various products.
could you guide me
Regards,
SG
The following is the error I am getting in C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jul 9, 2013 7:30:18 PM CDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 from Oracle Corporation>
<Jul 9, 2013 7:30:47 PM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Jul 9, 2013 7:30:57 PM CDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://SUBHASUBBU:7001.>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Jul 9, 2013 7:30:57 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 8349
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as CN=Entrust.net Secure Server Certification Authority
Processing TP 1
Storing TP 1 as CN=Entrust.net Secure Server Certification Authority 1
Processing TP 2
Storing TP 2 as CN=Entrust.net Certification Authority (2048)
Processing TP 3
Storing TP 3 as CN=GTE CyberTrust Global Root
Processing TP 4
Storing TP 4 as OU=Secure Server Certification Authority
Processing TP 5
Storing TP 5 as OU=Class 1 Public Primary Certification Authority
Processing TP 6
Storing TP 6 as OU=Class 2 Public Primary Certification Authority
Processing TP 7
Storing TP 7 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 3941
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as OU=Class 1 Public Primary Certification Authority
Processing TP 1
Storing TP 1 as CN=GTE CyberTrust Global Root
Processing TP 2
Storing TP 2 as OU=Class 2 Public Primary Certification Authority
Processing TP 3
Storing TP 3 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
<Jul 9, 2013 7:31:41 PM CDT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EPMServer0 has been migrated to backup server and the backup server is accessing the TLOG of EPMServer0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log.>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Using OraclePKI Provider
javax.net.ssl.TrustManagerFactory supported
javax.net.ssl.KeyManagerFactory supported
Using OracleJSSE103 Provider
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source accountreconciliation_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source financialclose_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:33:42 PM CDT> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
<Jul 9, 2013 7:33:47 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'ACCOUNTRECONCILIATION [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:35:15 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'FINANCIALCLOSE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:35:44 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: com/oracle/adfm, Specification-Version: 1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\FMADFWEB_11.1.2.0\nw1g9o]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:36:57 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\odi\setup\manual\oracledi-agent\oraclediagent.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.bam.odi.library, Specification-Version: 11.1.1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:38:13 PM CDT> <Emergency> <Deployer> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
Hyperion Provider Services - Release 11.1.2.3.4408
Copyright (c) 1991, 2013 Oracle and / or its affiliates. All rights reserved.
connection mode : HTTP
essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
Mode: Non Fusion read from Registry
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Component was found from component type DISC_MAN_PRODUCT
Updating version Disclosure_dbVersion with DISC_MAN_PRODUCT
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 46
Essbase® Administration Services - Version 11.1.2.3.000.4415
Copyright © 1991, 2013 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
US Patent Number 5,359,724
US Patent Number 6,317,750
Current time stamp: Tue Jul 09 19:38:54 CDT 2013
Server started successfully
Waiting for client requests
HRContextListener::contextInitialized
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 203
- WEBLOGIC
null
- The AMHM configuration file path is..nullconf
- getting attributes for bsp.jsr: [Migration, Ant-Version, Manifest-Version, Created-By, Version]
- going to get value for Migration attribute
- Encryption Type : AES
- Invocation of generateSecurityFile Successful
- userName :
- ServiceID :
- applicationName :
- Configuration File (config.xml) does not exist under C:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1\config.xml Process aborted.
- Migration Failed
Utf8Filter: forceRequestCharacterEncoding set to true (init-param=true)
Utf8Filter: repairRequestParameters set to false (init-param=false)
Utf8Filter: rebuildPathInfo set to false (init-param=false)
Utf8Filter: revertRequestURI set to true (init-param=true)
Utf8Filter: settings are true/false/false/true
Initializing CORBA ORB.
CORBA ORB initialization complete.
Loading configuration from registry
WSBaseServlet.setDefaultGSMContext(): Servlet GSM context. host=192.168.204.1:6800
Log configuration: file:/C:/Oracle/Middleware/user_projects/epmsystem1/ReportingAnalysis/RAFrameworkWebapp/WEB-INF/logging.properties
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EPMServer.>
<Jul 9, 2013 7:39:44 PM CDT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on fe80:0:0:0:0:5efe:c0a8:ed01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:100:7f:fffe:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[13]" is now listening on 0:0:0:0:0:0:0:1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:cc01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:c0a8:7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[12]" is now listening on 127.0.0.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:3415:3499:e650:c29e:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[10]" is now listening on fe80:0:0:0:2d02:d309:55d5:a150:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[11]" is now listening on fe80:0:0:0:5894:d88c:c022:f32b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.204.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.0.7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:c885:cffb:be7a:3e0b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:1d4d:5292:d06b:f62b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.237.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EPMServer0" for domain "EPMSystem" running in Production Mode>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <Server> <BEA-002611> <Hostname "SUBHASUBBU", maps to multiple IP addresses: 192.168.204.1, 192.168.237.1, 192.168.0.7, fe80:0:0:0:c885:cffb:be7a:3e0b%18, fe80:0:0:0:1d4d:5292:d06b:f62b%20, fe80:0:0:0:3415:3499:e650:c29e%15>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM V8_VERSION WHERE 1 = 0" set up for pool "raframework_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:54 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,190 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:04 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,198 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:19 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 0:0:0:0:0:0:0:1:54,216 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM ARM_ATTRIBUTES WHERE 1 = 0" set up for pool "accountreconciliation_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM AIF_LOOKUP_MAPPINGS WHERE 1 = 0" set up for pool "aif_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM CALCMGRCONFIG WHERE 1 = 0" set up for pool "calc_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DISCMAN_COUNTER WHERE 1 = 0" set up for pool "discman_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM SERVERLOGID WHERE 1 = 0" set up for pool "eas_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM FCC_USER_ATTRIBUTES WHERE 1 = 0" set up for pool "financialclose_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REPW" set up for pool "odiWorkRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSPSYS_CLUSTER WHERE 1 = 0" set up for pool "planning_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HPM_APPLICATION WHERE 1 = 0" set up for pool "profitability_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:18:49 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,579 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:22:29 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,820 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:29:44 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:55,178 during the configured idle timeout of 5 secs>First of all "I installed 11.1.2.3 in windows 7 ultimate OS", it is not a supported OS so if you want assistance problem solving you should stick with a supported OS.
It also looks like you have installed a whole range of products some requiring additional configuration and the requirement of SOA.
I recommend starting with a support OS and only install products that are required.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error 404 -- NOT FOUND when running a form in form 11g
Hi All,
I got this problem when I run the forms using internet explorer.
I work on Forms 11g which uses weblogic 10.3 for web deployment of the forms.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Can any one tell me where it went wrong.
ThanksLet's start by clearing up some confusion.
PORTS
In version 11.1.1.x here are how the common ports are defined by default:
1. HTTP Server - 8888
2. WLS_FORMS - 9001
3. WLS_REPORTS - 9002
4. WLS Admin Server - 7001
So, if you understand how ports work in general, you should see that there are two ways to run a form. You can either go through HTTP Server or call WLS_FORMS directly. This means that both of the following would work, although one would be a direct path and the other would route the request through the HTTP Server:
<li>http://ie1fdtfc5zl1s:9001/forms/frmservlet?config=frmdemo
<li>http://ie1fdtfc5zl1s:8888/forms/frmservlet?config=frmdemo
Port 7001, will always be the Admin Server port by default for the Classic domain. By default, the only thing you can do from here is access EM or WLS Console.
As for the tns issue, by default, both the Builder and runtime will expect to find tnsnames.ora in the Instance Home \config so be sure you are adding the correct entries to the correct file.
You can hard code a path to the file which you prefer be used by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN=C:\Oracle\mytnsdirectory). This will apply only to running forms and not the Builder.
Also, here is something which often is confusing to many people.... just because you launched your form from the Builder does not mean that the running form has anything to do with the Builder at that point. In other words, when you click on the RunForm button in the builder all you are doing is passing a url to a browser. The browser and the form are not using any of the Builder's settings except those which may have been passed in the URL (e.g. username/password). ALL running forms are considered "runtime". This means all of the environment configuration information for a running form will need to be set in default.env. The Builder, on the other hand will rely on the System variable, Windows Registry (or shell if on Unix).
Maybe you are looking for
-
Hi all, I have a problem with comparing two rows in one table. The situation: Person_1 have to insert row_1 in table_xy. After a while person_2 has to insert the same data as row_2 for controlling person_1 in table_xy. I have created a compare_flag i
-
SOP - Flexible Planning u2013 Demand Management.
Hello Gurus Can any one guide me SOP - Long term plannng / Flexible Planning - Transfer to demand managment Process Thanks JJ Edited by: JJ_SAP_S on Jul 28, 2008 12:24 AM
-
Multiple Transport Package Impact
We have created transport packages created per module and 1st module APO is released to QA and Production, next GL module is also released when we transport all dependent objects eventhough they were transported earlier in SCP also changed to package
-
A few months back I stumbled across a fantastic example of Keynote on the Apple web site. It was not a video tutorial, but an actual presentation that allowed one to dissect and inspect how it was put together. I have been searching and searching for
-
I am trying to get my phone # synced with my Imessage it is only using imessage with my email. I tried adding my phone number but it won't verify it.