Error 41 When Opening FCP Project

Hai Guise,
came home from college with my final cut pro project file and the rest of the scratch files via my ext HD, plugged it in, tried opening and i got final cut pro error message 41, im guessing its something to do with the version, i tried download the most recent version of the apple website and it says i have it so i guess maybe the college's one is out-of-date?
i have tried trashing prefs too
any suggestions?

So what version do you have?
How is the external hard drive formatted?
Have you set the external's permissions to "ignore ownership".
x

Similar Messages

Error message when opening current project/sequence error?

Hi!
So I'm working with a project, a very simple timeline with vids transcoded to cineform codec. Everything is working beautiful. But every time I open the project to continue working on it, it shows me a strange error message that won't allow me to open my project. Is very stressful. I have to try many times until suddenly it opens the project. I always try to open it from all possible ways (double clicking on the project, from Premiere directly, etc) and is always the same issue. Until after many attempts it decides to open it. Does anyone know what's going on? This is the pop up message:
Thanks so much for the help.
Elaine.-

Here is a link that talks about this error message. It may help you to find an answer
Features and Sequence Presets missing | Adobe Premiere Pro CS6

Keep getting an error message when opening a project.

When I try to open a project, a box pops up sayin the project appears to be damaged and cannot be opened. WHat can I do to open my project? Why am I getting this mesage?

popto
Apparently you started this question here in another thread around June 29, 2013 and never followed up on direct questions that would have helped us help you at this time.
http://forums.adobe.com/thread/1244744
I would encourage Hunt to close this thread (I do not have the authority to do that), and have you continue in the thread that you started already. Steve Grisetti, Hunt, and I had all posted in that thread and were waiting for the requested information, Steve Grisetti first or all of the requested information at one time.
Thanks.
ATR
Add On...A good look at the original thread seems to indicate that both Steve Grisetti and Hunt suggested the AutoSave try at that time. Did you ever do that? Apparently Hunt is requesting the same AutoSave look again in this thread.

General error when opening FCP project file

Hi, I have searched on the forums and found similar questions, but no solution yet.
I created a project about a month ago (FCP 5.0.4) and now I need to make some additions but every time I open the file (or all of the 20 autosaved files) I get a general error message. I tried moving the media files to another folder, but I still get the general error message. I have the project file on my local drive and the scratch disk is a My Book drive (I forgot to reformat the drive so it is still Fat32). I have removed the preferences and ran disk first aid already.
All of my other projects I can open just fine.
Any suggestions? I need to add about 2 more minutes to the project which is already 18min. It took me a week to edit and I really don't want to re-edit everything.
I am using FCP 5.0.4 on a PB G4 1.5Ghz

I don't quite understand - did you move your project files to a FAT 32 formatted HD?
If so, they're probably cooked . . . (as in wrecked)
Check to see if they're .fcp and if not, try changing one to that, then try to open it.
Search this forum for something like FAT 32 or Mac OS Extended - you may glean more accurate info from that.
Andy
G5 Quad 8GB. 250, 500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

When attempting to edit a project in the PWA I receive the error: 'An error occurred while opening your project. Give us a few minutes and try again...' Project Server 2013

Hello,
I am hoping someone can assist with the error we are encountering when trying to edit a project from the PWA in Project Server 2013. I can click on the project name and go to the detail page and I can
click and see the schedule. However, if I click on a task in the schedule and attempt to edit it, I receive the following error:
'An error occurred while opening your project. Give us a few minutes and try again. If this happens again, contact your administrator.'
At this point I must click cancel twice to get rid of the error pop-up message. At this point, I am no longer able to look
at the schedule of the project either. Can someone assist with this issue?
Thanks

Hi antonio,
In addition to Phani's advice, which version of IE are you using?
Can you reproduce the issue on another mahcine and with another browser?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Adobe Premiere CC crashes when opening a project file .... error 3697 . [was:Adobe Premiere CC]

Adobe Premiere CC crashes when opening a project file .... error 3697 .... have to close application with Task Manager.... media files open separately OK

Just that one project, or any project? Can you create new projects?

Priemier Elements 12 pops up a error screen when opening project." No disc in drive E.Please insert

Priemier Elements 12 pops up a error screen when opening project." No disc in drive E.Please insert disc to continue." My DVD drives are F and D. What do I have to do to get rid of this error?

charkmapman
What computer operating system is your Premiere Elements 12 running on?
In versions of Premiere Elements earlier than 12, the answer for that type of "No disc" message was usually related to SmartSound/Sonicfire Pro 5 feature. But, there is no SmartSound/SonicfirePro 5 feature in version 12, only Music Scores without the SmartSound name.
Consequently, I would suggest an uninstall, do a ccleaner run through (regular cleaner and registry cleaner parts), reinstall.
http://www.piriform.com/ccleaner
We will be watching for the results.
Thanks.
ATR

There was a problem sending the command to the program when opening Microsoft Project 2010 files

When opening MS Project 2010 files from the file and print server, I receive "There was a problem sending the command to the program." Copy the same file to my local drive and the file opens fine. This can be repeated by several other
users. Created a simple project file and once the size hit 1 MB, the error appeared. The error appears on all files over 1 MB.
I am a domain admin, so it is not a rights issue. This does not seem to be a network latency issue, the file copies extremely fast.
Any ideas?

This message appears to be caused by Windows Explorer trying to send old-fashioned DDE messages to the Application.
Since MS Project has no "Ignore DDE messages" setting you might want to go change the compatibility settings for WinProj.EXE (and any shortcut to it) to Windows 7 or greater. Hopefully then Windows Explorer will stop trying to send DDE messages.
Another possible culprit is older versions of the WinZip explorer extensions - I would disable them as well.
Good luck,
James.
James Boman - http://www.boman.biz Software Consultant for IPMO - http://www.ipmo.com.au

LV2012 crashes when opening LV2010 project containing OOP and dynamic FPGA references

I have a project that was written under LV2010 and has no problems that I am aware of. This project contains OOP and dynamic FPGA references. I am trying to upgrade this project to LV2012. When opening this project under LV2012 (or any subVI containing OOP) I get an error message, as shown in the attached screenshot. Has anyone else observed this problem? I haven't found any relevant postings on this forum yet.
My project is quite large, with many accessors.
Thank you for any assistance you can offer.
Attachments:
LV2012_Crash.PNG ‏22 KB

Thank you for your response, but the Discussion Forums link that you provided refers to a problem that occurs when exiting a running executable. My problem is different. I am simply opening up a LV2010 project using LV2012. No running of my program is involved.
Anyway, after several days of work, I narrowed down the cause of the LabVIEW crash. My code contained a Disable structure, and within that Disable structure there was a subVI that had an unwired object terminal (set to dynamic dispatch). Deleting the subVI in the Disable structure eliminated the LabVIEW crashing. Weird behavior.

I Don't Want "Creating Overview" For audio when Opening A Project

when opening a project , is there a way to turn creating overview off? i have it turned off when recording already. i don't want to have to wait when booting up project , to wait for audio overview that i don't need
thanks

OK, here's what I'd suggest...
1. Find the Apple Loops folder on your system. On my system it's in:
HD > Library > Audio > Apple Loops
There's another in:
HD > Library > Audio > Apple Loops > Apple > Apple Loops for Soundtrack Pro
2. CMD-I on these folders and see who the 'owner' is. If the name listed is not the name of your home folder, then unlock the lock and change the owner to the name-of-your-home-folder.
3. Click the disclosure triangle by "Details:" and then, after you've changed the owner, click "Apple to enclosed items"
From that point on you should not be getting the error message.
HOWEVER... I've found that sometimes the waveform overview for certain "FX" (as listed in the Apple Loops browser within Logic) will not be rendered. That's a topic for another day though...
Message was edited by: *Orderly Turkle*

I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms are appreciated.

Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

Error Message when open iTunes -42032. What can I do?

Error Message when open iTunes -42032. What can I do?

Try 2 solutions: 1. Press both Ctrl and Shift keys then double click on ITunes. Hold keys down until a box appears on screen indicating ITunes is starting in "safe mode'. left click on 'continue" and ITunes will run without closing.
2; Start ITunes normally, then after loading, choose "Match" and then touch "stop" beforre step 3 , Uploading songs...", runs for more than a few seconds. The code problems are in Match; the uploading function in Match. ITunes won't crash if you stop Match soon enough!

Error message when opening a document "this document is being used by another user

error message when opening a document "this document is being used by another user, do you want to make a copy?
I select yes, then new message - word can not open this document.the document might be in use or it may not be an invalid document.
Any suggestions?

Hello MrNeuf,
I would recommend releasing and renewing the IP lease on the affected computer. The following article provides further information and details the process of doing so.
Mac OS: How to release and renew a DHCP lease
http://support.apple.com/kb/TS1920
Cheers,
Allen

Error message when opening CS6 files in earlier versions

PSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
Hoping someone can throw some light on this.

This similar to the message one should get in an older version of photoshop such as photoshop 7.
If one presses ok instead of read composite that might preserve the layers with the original look.
But sometimes if a layer blending mode or some other feature is used an earlier versions of photoshop doesn't have, reading the composite is the only way to preserve the look of the image.
You said your using shape layers?
If they are shape layers you didn't use a stroke from the tool options bar?
Can you post an example of the image with the layers panel visible that you get that message with?
I guess your using photoshop cs6 with the 13.01 update?

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

Error 41 When Opening FCP Project

Similar Messages

Maybe you are looking for